Application scenarios
Used for medicine, health care products, medical raw materials, extraction of raw food, spices, seasonings, soup, tea, herbal
wine, drinks, gifts, etc
Quality wood pellets from oak, spruce , pine and beech woods
Diameter: 6-8 mm
Humidity: <10%
Heat: > 17, 5 kJ / kg
Ash content: <0.8%
Density >1100kg/m3
Moisture content <9%
Ash content <0.7%
Sulfur content<0.01%
Nitrogen content<0.13%
Caloric value>4750 Kcal/kg
Benefits of wood pellets
high heat
Convenient transportation
Save storage space
Do not cause air pollution, environmental
Raw materials - Birch and pine sawdust mix
Dimensions - Length - 300 mm +-15 mm, Diameter - 90 mm +5 mm
Humidity - 8.4 %
Ash content - 0.72 %
Calorific value - 18,87 - 20,02 MJ/kg
Raw materials - Birch and pine sawdust mix
Dimensions - Length - 300 mm +-15 mm, Diameter - 90 mm +5 mm
Humidity - 8.4 %
Ash content - 0.72 %
Calorific value - 18,87 - 20,02 MJ/kg
low oxygen Selenium Granules
Size: 2-6mm.3-5mm,1-10mm or as required
Molecular Formula - Se
Molecular Weight - 78.96
Melting Point - 217 C
Boiling Point - 684.9 + 1.0 C
Relative Density - 4.81 g /cm3
Purity - 99.99%
Appeaance - Black
Item Test condition Test Method Value Unit
Density ISO 1183 0.944-0.955 g/cm3
MFR 190 C/2.16kg ISO 1133 0.03-0.07 g/10min
Tensile strength at yield ISO 527-2 22 MPa
Elongation at break ISO 527-2 >350 %
ESCR F50,50 C,100% ASTM D-1693A 1000 h
VICAT ASTM D-1525 126 C
Item Test condition Test Method Value Unit
Density ISO 1183 0.944-0.955 g/cm3
MFR 190 C/2.16kg ISO 1133 0.03-0.07 g/10min
Tensile strength at yield ISO 527-2 22 MPa
Elongation at break ISO 527-2 >350 %
ESCR F50,50 C,100% ASTM D-1693A 1000 h
VICAT ASTM D-1525 126 C
Item Test Condition Test Method Value Unit
Density ISO 1183 0.950~0.955 g/cm
MFR 190 C/2.16kg ISO 1133 1.7~2.5 g/10min
Tensile strength at yield ISO 527-2 24 MPa
Elongation at break ISO 527-2 >600 %
