Find Verified Flange Suppliers, Manufacturers and Wholesalers

ASME/ANSI/DIN/GOST/BS EN RF/FF/RJ 150#-2500# Carbon Steel /Stainless Steel /Alloy Steel Forged WN/SO/Threaded/Plate/Socket/Blind Flange

1.Material:
Carbon steel A105/Rst37.2/C22.8/Q235 Stainless steel 304/304L,316/316L,321,ect.

2.Size:1/2"-48"

3.Pressure:150lbs-2500lbs PN0.6-PN16.0

4.Facing:RF/RJ/ FF

5.Standard:ANSI(ASME)16.5 16.47/DIN/JIS/UNI/...

6.Flanges of welding neck, socket welding, threaded, blind, slip on, lap joint are in accordance with ANSI 16.5 from 1/2" to 24" and classes 150 to 2500 (complete range).

7. Production process : raw material--cutting--heating--forging--heat treatment--maching--inspection.-washing-ex-working.

8. Certificate :ISO9001-2008

9. Used for : linepipe, heat exchanger, petroleum,chemical,power,gas,water,shipbuilding,construction,etc.

10.Blind, slip on, welding neck flanges are from 6 Bar to 40 Bar in accordance with DIN.

11.Flanges from 1/2" to 48" and up to 450 lbs are in accordance with BS10 Table D & Table E, BS Table F & Table H, BS Table J & Table K.

12.Flanges from 2kg to 210 kg are in accordance with JIS.

13.Flanges according to API 605/ASME B16.5/ASME B16.47

14.Depending on special purposes, flanges can be manufactured in different shapes and sizes

15. Excellent and high quality contro

Casting Flange

Flanges
ANSI B16.5 / B16.47 / B16.10 / 16.36 / 16.48.
We develop product as per your requirement.

For price, specification and other details please contact us.

for more information go to www.hellaryimportexport.com and contact us.

Ms Flange

SS FLANGE

A flange nut looks like a standard hex nut from one side, but the bottom is widened into a circular flange, creating a bell-like shape. Most of the time manufacturers serrate the bearing surface of flange nuts So that it gives a better grip on the surface of the joint. This serves to distribute the pressure of the nut over the part being secured, reducing the chance of damage to the part and making it less likely to loosen as a result of an uneven fastening surface. The flange may be serrated to provide a locking action. On a serrated flange nut, the serrations are angled such that they keep the nut from rotating in the direction that would loosen the nut. Because of the serrations, they cannot be used with a washer or on surfaces that must not be scratched. Flange nuts are widely used in automobiles, electronic products, and the aerospace industry. HELLARY offers these nuts mostly hexagonal in shape and are made up of hardened steel and often coated with zinc.

This is a Flange without a bore and is used to shut off a piping system or vessel opening. It also permits easy access to vessels or piping systems for inspection purposes.

DIMENSION SPECIFICATIONS AS PER THE INTERNATIONAL STANDARD ASTM, ASME, API, AISI, BS, ANSI, DIN, JIS, MSSP, NACE

SIZE : ½" to 60" (As Per Customer Requirement)

CLASS : 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS DIN Standard ND-6,10, 16, 25, 40 Etc.

MATERIAL GRADE :
Carbon Steel Blind Flange : ASTM A105, ASTM A 694 F42

Low Temperature Carbon Steel Blind Flange : A350 LF2/A350 LF3

Copper Alloys Blind Flange : ASTM / ASME SB 61 / 62 / 151 / 152
C 70600 (CU -NI- 90/10)
C 71500 (CU -NI- 70/30)
UNS NO. C 92200, UNS NO. C 83600,UNS NO C 10100
C 10200, C 10300, C 10800, C 12000, C 12200

Nickel Alloys Blind Flange : Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22, C276

Duplex Blind Flange : ASTM A 182 UNS F 44, F 45, F51, F 53, F 55, F 60,F 61

Stainless Steel Blind Flange : ASTM 182 F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L

Alloy Steel Blind Flange : ASTM SA 182 F1/F5/F9/F11/F22/F91

This is similar to the slip-on Flange in outline, but the bore is threaded, thus enabling assembly without welding. This obviously limits its application to relatively low pressure piping systems. The Flange may be welded around the joint after assembly, but this is not considered a satisfactory method of increasing its use in pressure applications.

DIMENSION SPECIFICATIONS AS PER THE INTERNATIONAL STANDARD ASTM, ASME, API, AISI, BS, ANSI, DIN, JIS, MSSP, NACE

SIZE : 1/8" to 48" (As Per Customer Requirement)

CLASS : 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS DIN Standard ND-6, 10, 16, 25, 40 Etc

MATERIAL GRADE :
Stainless Steel Screwed Flange : ASTM A 182, A 240?Grade: F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H, 904L

Duplex stainless steel Screwed Flange : UNS S31803, 2205, Super Duplex stainless steel UNS S32750

Carbon Steel Screwed Flange : ASTM A 105, ASTM A 181

Alloy Steel Screwed Flange : ASTM A 182, GR F1, F11, F22, F5, F9, F91

Nickel Alloys Screwed Flange : Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22, C276

Copper Alloys Screwed Flange :
ASTM / ASME SB 61 / 62 / 151 / 152
C 70600 (CU -NI- 90/10)
C 71500 (CU -NI- 70/30)
UNS NO. C 92200, UNS NO. C 83600,UNS NO C 10100
C 10200, C 10300, C 10800, C 12000, C 12200

VALUE ADDED SERVICES :
Hot Dip Galvanizing
Test Certificate As Per EN 10204 - 3.1 & 3.2

This Flange is designed to be joined to a piping system by butt- welding. It is relatively expensive because of its long neck, but is preferred for high stress applications. The neck transmits stresses to the pipe, reducing stress concentrations at the base of the Flange. The gradual transition of thickness from the base to the neck to the wall thickness at the butt weld provides important reinforcement of the Flange. The bore of the Flange matches the bore of the pipe, reducing turbulence and erosion.

DIMENSION SPECIFICATIONS AS PER THE INTERNATIONAL STANDARD ASTM, ASME, API, AISI, BS, ANSI, DIN, JIS, MSSP, NACE

SIZE :
½" to 60" (As Per Customer Requirement)

CLASS :
150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS DIN Standard ND-6,10, 16, 25, 40 Etc.

MATERIAL GRADE :
Carbon Steel Weldneck Flange : ASTM A105, ASTM A 694 F42

Low Temperature Carbon Steel Weldneck Flange : A350 LF2/A350 LF3

Copper Alloys Weldneck Flange : ASTM / ASME SB 61 / 62 / 151 / 152.
C 70600 (CU -NI- 90/10)
C 71500 (CU -NI- 70/30)
UNS NO. C 92200, UNS NO. C 83600,UNS NO C 10100,
C 10200, C 10300, C 10800, C 12000, C 12200

Nickel Alloys Weldneck Flange : Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22, C276

Duplex Weldneck Flange : ASTM A 182 UNS F 44, F 45, F51, F 53, F 55, F 60, F 61.

Stainless Steel Weldneck Flange : ASTM 182 F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L.

Alloy Steel Weldneck Flange : ASTM SA 182 F1/F5/F9/F11/F22/F91

VALUE ADDED SERVICES :
Hot Dip Galvanizing
Test Certificate As Per EN 10204 - 3.1 & 3.2

This is similar to a slip-on Flange in outline, but the bore is counter- bored to accept the pipe. The diameter of the remaining bore is the same as the inside diameter of the pipe. The Flange is attached to the pipe by a fillet weld around the hub of the Flange. An optional internal weld may be applied in high stress applications. Its biggest use is in high-pressure systems such as hydraulic and steam lines.

DIMENSION SPECIFICATIONS AS PER THE INTERNATIONAL STANDARD ASTM, ASME, API, AISI, BS, ANSI, DIN, JIS, MSSP, NACE

SIZE :
½" to 60" (As Per Customer Requirement)

CLASS :
150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS DIN Standard ND-6,10, 16, 25, 40 Etc.

MATERIAL GRADE :
Carbon Steel Socketweld Flange : ASTM A105, ASTM A 694 F42

Low Temperature Carbon Steel Socketweld Flange : A350 LF2/A350 LF3

Copper Alloys Socketweld Flange : ASTM / ASME SB 61 / 62 / 151 / 152
C 70600 (CU -NI- 90/10)
C 71500 (CU -NI- 70/30)
UNS NO. C 92200, UNS NO. C 83600,UNS NO C 10100
C 10200, C 10300, C 10800, C 12000, C 12200

Nickel Alloys Socketweld Flange : Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22, C276

Duplex Socketweld Flange : ASTM A 182 UNS F 44, F 45, F51, F 53, F 55, F 60,F 61

Stainless Steel Socketweld Flange : ASTM 182 F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L.

Alloy Steel Socketweld Flange : ASTM SA 182 F1/F5/F9/F11/F22/F91

VALUE ADDED SERVICES :
Hot Dip Galvanizing
Epoxy Coating
Test Certificate As Per EN 10204 - 3.1 & 3.2

Lap Joint flanges are used on piping fitted with lapped pipe or with lap joint stub ends. The lap joint flange with the stub end assembly are normally used in systems requiring frequent dismantling for inspection and cleaning and where the ability to swivel flanges and to align bolt holes materially eases the erection of large diameter or unusually stiff piping. These flanges are also used in applications where there is a need to facilitate bolt alignment. These type of flanges are similar to slip-on flanges. The only difference is that it has a curved radius at the bore and face to accommodate a lap joint stub end. They may be used at all pressures and are available in a full size range. These lap joint flanges slip over the pipe, and are not welded. They are otherwise fastened to it. Here the bolting pressure is transferred to the gasket by the pressure of the flange against the back of the pipe lap.

DIMENSION SPECIFICATIONS AS PER THE INTERNATIONAL STANDARD ASTM, ASME, API, AISI, BS, ANSI, DIN, JIS, MSSP, NACE

SIZE :
½" to 48" (As Per Customer Requirement)

CLASS :
150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS DIN Standard ND-6, 10, 16, 25, 40 Etc

MATERIAL GRADE:
Carbon Steel Lap Joint Flange : ASTM A105, ASTM A 694 F42

Low Temperature Carbon Steel Lap Joint Flange : A350 LF2/A350 LF3

Copper Alloys Lap Joint Flange :
ASTM / ASME SB 61 / 62 / 151 / 152
C 70600 (CU -NI- 90/10
C 71500 (CU -NI- 70/30)
UNS NO. C 92200, UNS NO. C 83600,UNS NO C 10100
C 10200, C 10300, C 10800, C 12000, C 12200

Nickel Alloys Lap Joint Flange : Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22, C276

Duplex Lap Joint Flange : ASTM A 182 UNS F 44, F 45, F51, F 53, F 55, F 60,F 61

Stainless Steel Lap Joint Flange : ASTM 182 F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L

Alloy Steel Lap Joint Flange : ASTM SA 182 F1/F5/F9/F11/F22/F91

ADVANTAGE OF LAP JOINT FLANGES:
Lap Joint flanges have certain special advantages over other flanges. These are as follows:

Lap Joint flanges have the freedom to swivel around the pipe. This facilitates the lining up of opposing flange bolt holes.
Lack of contact with the fluid inside the pipe leads to the greater durability of these flanges.
In piping systems which corrode or erode quickly, the lap joint flanges may be salvaged for re-use.
The pressure-holding capacity of lap joint flanges is little. But it is better than that of slip-on flanges.
The Lap Joint works as a backing ring on the stub.
The main advantage of lap joint flange is that the bolt holes can be aligned with the matching flange after the welds have been completed.
They allow rotational alignment capability.

VALUE ADDED SERVICES :
Hot Dip Galvanizing
Electro Polish
Test Certificate As Per EN 10204 - 3.1 & 3.2

The Flange is slipped over the pipe or tube and welded (usually both inside and outside) to provide strength and to prevent leaks. These flanges are at the low cost end of the scale, and do not require high accuracy when cutting the pipe or tube to length. They can sometimes have a boss or hub, and can be made with a bore to suit pipe or tube.

Dimension Specifications : As Per The International Standard Astm, Asme, Api, Aisi, Bs, Ansi, Din, Jis, Mssp, Nace

Size :
½" to 60" (As Per Customer Requirement)

Class :
150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS DIN Standard ND-6,10, 16, 25, 40 Etc.

Material Grade :

Carbon Steel Slipon Flange : ASTM A105, ASTM A 694 F42
Low Temperature Carbon Steel Slipon Flange : A350 LF2/A350 LF3

Copper Alloys Slipon Flange :
ASTM / ASME SB 61 / 62 / 151 / 152.
C 70600 (CU -NI- 90/10)
C 71500 (CU -NI- 70/30)
UNS NO. C 92200, UNS NO. C 83600,UNS NO C 10100,C 10200, C 10300, C 10800, C 12000, C 12200

Nickel Alloys Slipon Flange : Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22, C276

Duplex Slipon Flange : ASTM A 182 UNS F 44, F 45, F51, F 53, F 55, F 60,F 61.

Stainless Steel Slipon Flange : ASTM 182 F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L.

Alloy Steel Slipon Flange : ASTM SA 182 F1/F5/F9/F11/F22/F91

Value Added Services :
Hot Dip Galvanizing
Test Certificate As Per EN 10204 - 3.1 & 3.2

Steel Forged Endplate Flanges of Concrete Piles
D300x180x12mm (6 holes)
D350x220x12mm (7 holes)
D400x250x12mm (10 holes)
D500x320x14mm (12 holes)
D600x400x14mm (18 holes)
D600x400x16mm (18 holes)
Delivery time: Negotiate
Packing: bulk package then to container
Payment term: By irrevocable L/C at sight

Copper Nickel alloy flanges

Flange olet

* Hitesh Metal are manufacturers, stockiest & suppliers of 254 smo flanges, which have exceptional quality finishing and coercion for high pressure, zero defects and long life.

* These 254 SMO Flanges are offered in various specifications, shapes and sizes. We meet customized requirements of our clients, Our 254 SMO Flanges is widely used in a range of applications like structural, mechanical and general engineering purposes.

Range : 1/2''~60''
Specification : ASTM A403 / ASME SB403
Dimensions : ANSI/ASME B16.5, B16.48, BS4504, BS 10, EN-1092, DIN, etc.
Standards : ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.
Class : 150#, 300#, 600#, 900#, 1500#, 2500#
Grades : UNS No. S31254

* We are dedicatedly involved in offering a wide array of Nickel Alloy Flanges. The products offered by us are manufactured using optimum grade nickel alloy and latest technology at our unit. our products are getting huge appreciation amongst our clients for their corrosion resistance nature and reliability. These products are available in a variety of grades and dimensions for our clients to choose from.

* Nickel Alloy Flanges are presented by us to our customers who are manufactured by alloy. These flanges are available in different shapes and sizes and are also customized as per the need of our customers. Our products are demanded for its resistant against corrosion, long life and affordable price.

Standards : ASTM / ASME, BS, DIN
Range : : 15 NB to 300 NB
Grade : Nickel Alloy 200 (UNS No. N02200) Flanges, 2.4060, 2.4066
Nickel Alloy 200 Flanges: B 564 / SB 564
Class : 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, ASA 150#, ASA 300# DIN ND 6,10,16,25,40 Etc.
Type : ASTM B 564 Nickel 200 Flanges
ASME SB 564 Nickel 200 Flanges
Nickel Alloy 200(UNS No. N02200) Flanges

* We are a most trusted name in between the topmost companies in this business, instrumental in offering high quality array of Duplex Steel Flange.

* We provide different types of sites to our customers such as screwed flanges, socket weld flanges, blind flanges, reducing flanges, plate flanges, stainless steel flanges, lap joint flanges and slip on flanges.

Standards : ASTM, ASME, API, AISI, BS, ANSI, DIN, JIS, MSSP, NACE A240, A276, A479, A789, A790, A182 (Grade F51), A923
DIN Standard : ND-6,10, 16, 25, 40 Etc.
Materials : ASTM A182, F 51 UNS S31803
Class : 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
From : Slip on Flanges, SORF, Weld neck Flanges â?? WNRF, Socket weld Flanges : SWRF, Blind Flanges. BLRFLapped joint Flanges, Screwed Flanges, Long weld neck Flanges, Reducing Flanges, Spectacle Flanges, Ring joint Flanges
Size 1/2 NB TO 24 NB IN
Usage : Water System, Electric Power, Oil Field, Pipe Projects, Natural Gas, Offshore, Shipbuilding etc.

* Our manufacturing arena is well known in the market that comprises of various flanges one of which is Alloy Steel flanges. They are available in variety such as weld neck, Deck flange, lap joint etc.

* They appear to be slightly oxidized and have been bought by many of our customers. The machine used in the advancement of the flanges is of the latest technology. These flanges have been rated the best among our clients mainly due to the best quality of raw materials used to manufacture this product.

Standards : ANSI Flanges, ASME Flanges, API, MSSP, BS Flanges, DIN Flanges, EN Flanges, NACE etc.
Dimension : 150#, 300#, 600#, 900#, 1500#, 2500#. PN6, PN10, PN16, PN25, PN40, PN64 etc.
Grade : ASTM / ASME A182 F1 / F5 / F9 / F11 / F22 / F91.
Class/ Pressure : 150#, 300#, 400 #, 600#, 900#, 1500# & 2500#
Size ½ to 36
Wall Thickness : SCH.10, 20, 30, 40, 80, 120, 160, STD, XS, XXS.
Type : Slip on Flanges , SORF, Weld neck Flanges â?? WNRF, Socket weld Flanges : SWRF, Blind Flanges , BLRF
Lapped joint Flanges, Screwed Flanges, Long weld neck Flanges, Reducing Flanges, Spectacle Flanges, Ring joint Flanges

* We are one of the most quality conscious producers of the wide range of Stainless Steel flanges which is meant to cater to various industrial platforms in various domains. The applications of this product can be traced to numerous industrial domains which is highly convenient for our clients.

* Apart from the latest technology, we also ensure high levels of tensile and ductile strength which is highly beneficial. Our experts monitor and make sure that these products are tested for its hardness and dimensional accuracy.

Standards : ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
Size : 1/2" NB TO 48" NB
Designation : A 182 / A 240, SA 182 / SA 240
Class : 150#, 300#, 400#, 600#, 900#, 1500# & 2500#.
Grade : ASTM A182 F304/ 304L/ 304H/316/ 316L/ 317/ 317L/ 321/ 310/ 347/ 904L/ ETC.