Year: 2009
Manufacturer: International
Model: DURASTAR 4400
Condition: Used
Engine Manufacturer: Allison
Horsepower: 260
Suspension: Spring
Drive Side: Left Hand Drive
10' Dump with 44" sides
Air Seat
Air Gate
Power Locks
Standard Amphibious Undercarriages- Small and Medium Size
Product Features
1) Pontoon Construction
High Strength Weathering Cor-Ten plate steel is used in the fabrication of the pontoons. Cor-Ten steel is marine grade and corrosion resistance steel that has 5 to 8 times the atmospheric corrosion resistance and 20% more tensile strength than similar size 16Mn Q345B structural plate steel.
In the pontoon, there are many supporting steel bars which reinforcing pontoon strongly. Each pontoon has 2 bulkheads, providing 3 independent watertight compartments with inspection plugs located on the outside of the pontoons. Each compartment of the pontoon has 1x25mm drain hole at bottom and 1x25mm inspection hole on side of pontoon near the top. Service man manholes on each pontoon are optional, made for easy maintenance and field servicing.
Pontoons are shot blasted to ensure that the surface is thoroughly clean and free from contaminants and rust. In addition, this process presents the steel with a surface texture that provides excellent adhesion of prime coat of paint. Interior Metal Finish is coated with Zinc chromate rust inhibitor or Rust Inhibitor priming paint. Exterior Metal Finish is 2 part organic zinc epoxy base coat Primer, Epoxy topcoat.
The bottom of the pontoon is reinforced for rough terrain operations. Especially the chains runway channels or paths are made of 3-layers steels, 2-part HD70 high tension steel plus the spring steel wear plate, which highly prolong the pontoon's service life.
SUNTON Pontoon shape is quite uniquely designed that could reduce the resistance of the water or mud during its moving.
The hydraulic hoses or pipes are shielded with steel from being damaged during operations.
2) Track Chains and Track Shoes
Each SUNTON pontoon could be equipped with two, three or four strands of heavy-duty track chains. The chain link pads and track pads are all made of high tension steel HD70. The design and size of SUNTON track chain rollers and pins or bushes are all different from others with larger sizes. Tensile strength of link pads could reach 680Mpa. The chain roller paths/channels are lined with high strength abrasion-resistant steel and spring steel that matches the hardness of the chain rollers.
Track shoes/cleats/pads are fabricated with heavy duty steel, which makes it less prone to cracking, due to the wider spread between yield strength and ultimate tensile strength. Track pad steel tensile strength reaches 620Mpa. Customer could select much harder steels, whose tensile strength could reach 860Mpa, but cost is higher. Track shoes are box-shaped, welded or bolted to the chains and fully covering the pontoons. UHMW wear plate or HDPE or HDMP plate, is the optional design to meet the challenge of wearing when machine often moves on stiff or tough ground. Usually there are two Ultra High Molecular Weight trackwear pads per cleat.
Origin: Henan, China (Mainland)
Brand: Dashan
Modelr: OEM
Type: Sleeve
Material: Copper, Tin Bronze
Dimension: OEM
Condition: New
Processing: CNC Machining
Processing Type: Machined Accessories
Samples: Available
Customized: As drawing
Weight: Based on the model
Packaging: Export wooden box package
Delivery time: 10 days
Advantages
1) Strict quality control
2) High load capacity Good anti-wearing
3) Low coefficients of friction
4) Good heat conductivity
5) Long life and maintenance-free
6) Contaminant by oil or grease
Slewing bearing is also called:slewing ring bearing/turnable bearing/slewing ring etc.
Slewing ring bearings can accommodate axial, radial and moment loads acting single or in combination and in any direction.
They are not mounted in a housing or on a shaft, but directly to a seating surface.
The inner and outer ring are supplied with mounting holes. both rings may have integral gears.
They are also referred to as slewing rings and tabletop bearings.
Slewing ring bearing can perform oscillating (slewing) as well as rotating movements.
They may be used without gears or with internal or external ge
2529 Excavator Machines Excavator Spare Parts Suppliers
Short on time? Let Excavator Machines Excavator Spare Parts sellers contact you.
Excellent quality 81NA-01021 R360LC-7 excavator slewing bearing used for excavator part
Features of Slewing Bearings
Slewing bearing is also called:Slewing ring bearing/Turnable bearing/Slewing ring etc.
Slewing Ring Bearings can accommodate axial, radial and moment loads acting single or incombination and in any direction.
They are not mounted in a housing or on a shaft, but directly to a seating surface.
The inner and outer ring are supplied with mounting holes. Both rings may have integral gears
They are also referred to as slewing rings and tabletop bearings.
Slewing ring bearing can perform oscillating (slewing) as well as rotating movements.
They may be used without gears or with internal or external ge
Other Products :
1) Undercarriage spare parts:Track shoe,Track Link,Bolt,Track roller,Carrier Roller,Sprocket,Front Idler,Idler Cushion
2) Engine spare parts:Cylinder Head, Cylinder Block, Turbocharger, Piston, Piston Ring, Metal, Crankshaft, Oil Pump, Fuel injection Pump, Water Pump, Alternator, Starting Motor
3) Hydraulic spare parts: Main Valve, Main Pump, Solenoid Valve, Boom/Arm/Bucket Cylinder, Final Drive, Travel Motor, Swing Machinery, Swing Motor
4) Operator’s Cab spare parts:Cab Ass’y, Monitor, Controller, Engine Controller, Wiring Harness, Seat, Air Conditioner, Air Compressor
5)Cooling parts:Radiator,heat sink,air conditioner,compressor,after cooler,water cooler,hydraulic oil cooler etc.
6)Other parts:Service kit,swing circle,engine hood,swivel joint,fuel tank,filter,boom,arm,bucket ect.
Rexroth
A2F A2FO A7V A6VM series A4VSO45/71/125/180/250/500, A4V40/56/71,
A4VG28/40/45/50/56/71/90/125/140/180/250, A10VSO16/18/28/45/63/71/85/100/140,
A10VG28/45/63,A10V63,A11VG50,A11V060/075/095/130/145/160/190/190/250,A11V260
kawasaki:
K3SP360,K5V80/140/160/200,K3V63DT/140DT/180DT/280,K3VG280,
NV64/84/111DT/137/172/270,NX15,NVK45,KVC925,KVC930,KVC932
M2X63/96/120/146/150/170/210,M5X130/150/173/180/500,MAG150/170
GM05VL/06VL/05VA/07VA,GM08/09/10/17/18/23/30H/35VA/35VL/38VB
Place of Origin: Henan, China (Mainland)
Brand Name: DASHAN
Model Number: PC200 PC300 PC400
Copper alloy:brass,bronze,Lead bronze
Use: Ore Mining
Processing Type:Machined parts
Packaging: Export standard woodenbox package
Bearing mechanism: solid friction
Lubrication condition: Fluid film lubrication
Lubricant: oiling
Operating characteristic:high temperature
Dimension: as the drawing
CUTTING EDGES & SEGMENTS FOR SALE
G-TOP has a large selection of welded and bolt-on cutting edge stock to fit all makes and models of excavators, dozers, loaders, scrapers, compactors and tractors!
Engineered for precision, durability, and superior performance, our cutting edges are designed to redefine the standards in the world of heavy machinery. Whether youâ??re engaged in construction, mining, or any other excavation endeavor, our cutting edges are meticulously crafted to meet the demanding challenges of your projects.
Unleash the potential of your equipment with our cutting-edge solutions, for a seamless and efficient excavation experience.
Volvo Excavators Teeth and Adapters: A Comprehensive Guide
Volvo excavators are renowned for their durability, efficiency, and versatility in handling various excavation tasks. One critical component that enhances their performance is the bucket tooth and adapter system.
Volvo excavator teeth models includeT55GPRC, 14553243RC, V360SYL etc., and the compatible models includeEC210B, EC240B, EC360B, EC460B, etc.
UNDERSTANDING VOLVO EXCAVATOR TEETH AND ADAPTERS
1. Teeth: Excavator teeth are attached to the bucket and are crucial for breaking and penetrating different types of materials, such as soil, rock, and asphalt. They come in various shapes and sizes, each designed to handle specific tasks. The most common types include:
Standard Teeth: Ideal for general excavation tasks. They provide a good balance between durability and performance.
Heavy Duty Teeth: Designed for more aggressive digging and tougher materials, such as rock or hard soil. These teeth are more robust and resistant to wear.
Rock Teeth: Equipped with a sharper, more pointed design to effectively break through rock and other hard materials.
Wide Bucket Teeth: These offer a broader surface area, which is useful for moving large volumes of material quickly.
2. Adapters: Adapters serve as the connection point between the bucket and the teeth. They are crucial for ensuring that the teeth remain securely attached and function properly. Adapters come in various styles, including:
Pin-On Adapters: Simple and cost-effective, these adapters use pins to attach the teeth to the bucket.
Quick Coupler Adapters: Designed for faster and easier attachment and detachment of the teeth, often used in applications where frequent changes are necessary.
Bolt-On Adapters: Provide a more secure connection and are typically used in heavy-duty applications where extra strength is required.
INTRODUCTION TO SANY EXCAVATOR BUCKET TEETH AND ADAPTERS
Sany excavator bucket teeth and adapters are crucial components designed to enhance the performance and efficiency of excavators. These parts play a vital role in ensuring effective digging, trenching, and material handling. The bucket teeth, attached to the bucket edge, penetrate the ground and break up materials, while the adapters serve as connectors that hold the teeth securely in place.
TYPES OF SANY EXCAVATOR BUCKET TEETH
General Purpose Teeth: General-purpose teeth are designed for a wide range of digging and loading applications. They are ideal for handling soft to medium-hard materials and are widely used in construction projects.
Rock Teeth: Rock teeth are specifically engineered for tough, abrasive conditions. These teeth have a pointed design that allows for efficient penetration into hard rock and compacted soil, making them perfect for mining and quarrying activities.
Heavy-Duty Teeth: Heavy-duty teeth are built to withstand extreme conditions and heavy loads. They are reinforced to offer enhanced durability and longevity, suitable for demanding applications such as demolition and heavy construction.
EXCAVATOR BUCKET TEETH & ADAPTERS SUPPLIER
G-TOP stocks a wide range of bucket teeth and adapters for excavators. Almost all bucket teeth and adapters are cast products, hardened to be more wear resistant than carbon steel. The adapters are sized to match the tooth size. the size is based on the thickness of the frog or base edge. most adapters are welded, but we offer a variety of bolt-on adapters to choose from.
High-Quality Loader Bucket Teeth for Enhanced Productivity
At G-TOP, we provide premium loader bucket teeth designed for various heavy-duty applications, including construction, mining, quarrying, and earthmoving. Our bucket teeth are engineered to maximize the efficiency and durability of loaders, ensuring optimal performance even in the toughest conditions.
Why Choose G-TOP Loader Bucket Teeth?
High-Strength Alloy Steel â?? Manufactured from wear-resistant materials to extend service life.
Precision Fit Design â?? Compatible with major loader brands such as Caterpillar, Komatsu, Volvo, Hitachi, JCB, John Deere, and more.
Various Tooth Profiles â?? Available in standard, rock chisel, heavy-duty, and penetration teeth to suit different ground conditions.
Easy Installation & Replacement â?? Designed for quick attachment, reducing downtime.
Bulk Supply & Competitive Pricing â?? Ideal for dealers, wholesalers, and construction companies.
Types of Loader Bucket Teeth We Offer
General-Purpose Teeth â?? Ideal for soft soil and light-duty operations.
Rock Chisel Teeth â?? Designed for breaking through hard and compact ground.
Heavy-Duty Teeth â?? Extra reinforced for demanding conditions like mining and excavation.
Penetration Teeth â?? Sharp-edged teeth for maximum penetration in dense materials.
Bolt-On & Weld-On Teeth â?? Available for different attachment styles.
Compatible Loader Brands & Models
We supply loader bucket teeth for a wide range of equipment, including:
Caterpillar Loaders (950, 966, 980, 988, etc.)
Komatsu Loaders (WA320, WA380, WA470, WA500, etc.)
Volvo Loaders (L60, L90, L120, L150, etc.)
Hitachi Loaders (ZW150, ZW220, ZW310, etc.)
JCB & John Deere Loaders
Caterpillar D9H Bulldozer with multi-shank ripper, ROPS canopy.
Very good working order from a one original owning company from new.
Excellent undercarriage.
CAT 420 HP engine in very good order.
Unlock the power of precision with ZNK Motors' excavator parts. From heavy-duty buckets to critical hydraulic components, our excavator parts are engineered to endure the toughest conditions and maximize performance. Whether you're tackling construction projects or excavation tasks, our comprehensive selection ensures you have the right parts for the job. With ZNK Motors, experience reliability, durability, and efficiency in every excavation endeavor, backed by our commitment to quality and customer satisfaction.
Unlock the power of precision with ZNK Motors' excavator parts. From heavy-duty buckets to critical hydraulic components, our excavator parts are engineered to endure the toughest conditions and maximize performance. Whether you\'re tackling construction projects or excavation tasks, our comprehensive selection ensures you have the right parts for the job. With ZNK Motors, experience reliability, durability, and efficiency in every excavation endeavor, backed by our commitment to quality and customer satisfaction.
G-TOP offers high-quality DEVELON loader teeth and bucket adapters designed to enhance the performance and durability of heavy machinery used in construction, mining, and other demanding industries. These components are engineered to withstand harsh working conditions, ensuring maximum efficiency and productivity.
LOADER TEETH
Types of Loader Teeth:
Standard Teeth: Ideal for general-purpose applications, providing a balance between penetration and wear resistance.
Heavy-Duty Teeth: Designed for tough applications, these teeth offer superior durability and resistance to abrasion.
Rock Teeth: Specifically made for working in rocky or hard ground conditions, ensuring efficient penetration and minimal wear.
Features:
Durable Materials: Made from high-quality alloy steel, ensuring long-lasting performance.
Optimized Design: Engineered for optimal penetration and material retention.
Easy Installation: Simple to replace and install, reducing downtime.
Benefits:
Enhanced Productivity: Improved penetration and digging performance.
Extended Service Life: Resistant to wear and tear, leading to fewer replacements.
Cost-Effective: Reduces maintenance costs and downtime.
Introduction To Sany Excavator Bucket Teeth And Adapters
Sany excavator bucket teeth and adapters are crucial components designed to enhance the performance and efficiency of excavators. These parts play a vital role in ensuring effective digging, trenching, and material handling. The bucket teeth, attached to the bucket edge, penetrate the ground and break up materials, while the adapters serve as connectors that hold the teeth securely in place.
TYPES OF SANY EXCAVATOR BUCKET TEETH
General Purpose Teeth: General-purpose teeth are designed for a wide range of digging and loading applications. They are ideal for handling soft to medium-hard materials and are widely used in construction projects.
Rock Teeth: Rock teeth are specifically engineered for tough, abrasive conditions. These teeth have a pointed design that allows for efficient penetration into hard rock and compacted soil, making them perfect for mining and quarrying activities.
Heavy-Duty Teeth: Heavy-duty teeth are built to withstand extreme conditions and heavy loads. They are reinforced to offer enhanced durability and longevity, suitable for demanding applications such as demolition and heavy construction.
TYPES OF SANY EXCAVATOR BUCKET ADAPTERS
Weld-On Adapters
Weld-on adapters are permanently attached to the bucket lip through welding. They offer a secure and durable fit, ensuring that the bucket teeth remain in place during intense operations.
Bolt-On Adapters
Bolt-on adapters are attached to the bucket lip using bolts. This type of adapter allows for easy replacement and maintenance, making it a popular choice for many operators.
Pin-On Adapters
Pin-on adapters use pins to secure the teeth to the bucket. They provide a reliable connection and are relatively easy to install and replace, suitable for various excavating tasks.
