Pine timber - also referred to redwood timber, commonly also known under its latin name "Pinus Sylvetris" is the most widely spread in the East European Countries. The tree is generally 30m high with a diameter of about 1m but larger trees may be found on favorable sites.
Big sizes - beams
Thickness - from 100 mm up to 300 mm
Width - from 100 mm up to 300 mm
Length - from 3000 mm up to 5400 mm
Small sizes - beams
Thickness - from 40 mm up to 95 mm
Width - from 60 mm up to 95 mm
Length - from 3000 mm up to 5400 mm
Boards
Big sizes - beams
Thickness - from 20 mm up to 50 mm
Width - from 50 mm up to 200 mm
Length - from 3000 mm up to 5400 mm
Beech timber - commonly also known under its Latin name "Fagus sylvatica" is the one most widely spread in the Romanian Carpathian Mountains, belonging thus to the only unpolluted forest area in Europe.
TASS - SUPER SHORT
Thickness - 25/32/38/50 mm
Width - from 80 mm and wider
Length - from 300 mm till 900 mm
TAS - SHORT
Thickness - 25/32/38/50 mm
Width - from 100 mm and wider
Length - from 1000 mm till 2000 mm
TAL - LONG
Thickness - 25/32/38/50 mm
Width - from 120 mm and wider
Length - from 2100 mm and longer
Pine Lumber
Thickness: 26/32/36/45/50+ mm
Width: 100/150/200+ mm
Length: 2200/2500/2800/3000+ mm
Heat treatment: Steaming light 10-12 hours, uniform color.
Drying: KD, KD 8-12%
Markings: timber is packed with one length in the bundle and can have markings at customer request
A grade: 4 sides clear without knots and / or hearts
AB grade: 4 sides clear - on one side of the piece of timber found traces of hearts healthy and / or a healthy node.
BC grade: 3 sides clear - allowed red heart, knots, bends and small cracks.
Pressure-treated lumber is wood that has undergone a process of chemical treatment to enhance its durability and resistance to decay, insects, and other environmental factors. This treatment process involves placing the lumber in a pressure chamber and forcing preservative chemicals into the wood fibers. The most common preservative used in this process is chromated copper arsenate (CCA), but there are other alternatives like alkaline copper quaternary (ACQ) or copper azole.
Douglas Fir stud lumber refers to lumber made from Douglas Fir trees that has been specifically processed for use as framing studs in construction. Douglas Fir is a type of softwood that is valued for its strength and dimensional stability, making it a popular choice for structural applications in building construction.
689 Wood Raw Material Processed Related Machinery Suppliers
Short on time? Let Wood Raw Material Processed Related Machinery sellers contact you.
We are suppliers of raw and sawn timber from Cameroon as IROKO, Sapelli, PADOUK, Bubinga, Sipo, Maobi, Okan, Tali, Tola, Zebra, Teak, Mahogany, Tioma, Azobe, Bosse, Foga, Bibolo, FRAKE
We offer a wide selection of pine, oak, poplar, etc. wood for the production of pallets: freshly sawn; dried; thermal treatment; with anti-mould treatment; boards with
Pads: 90mm x 90mm x 90mm
Desk: 1200mm x 90mm x 18mm
Desk: 1200mm x 80mm x 18mm
Desk: 1000mm x 90mm x 20mm
Classification system: European - French CTBA classification rules
3A quality
The description of Pallet boards elements
Other dimensions available on request.
Length: 1000mm, 1500mm, 2000mm, 3000mm, 4000mm, 6000mm
Thickness: 16mm, 19mm, 22mm, 32mm, 47mm, 50mm, 63mm, 75mm, 100mm
Width: 75mm, 100mm, 115mm, 125mm, 150mm, 175mm, 200mm, 215mm, 225mm, 250mm
Materials: Radiata Pine (New Zealand, Argentina, Chile etc). Mongolian Scotch Pine (Pinus sylvestris), White Pine (Chinese Northeast)
Grade: AA: No knots, blue spot or black line on both face and back), AB: One side has no knots and some knots on the other side, CC: Both sides have knots
Colour: Natural wood color or carbonization
Certificate: FSC, ISO, Phytosanitary Certificate, Fumigation Certificate etc.
Thickness: customer's requirements
Moisture Content: Customer Request
Export of wood SARL We are looking for serious buyers only. Hard and soft wood.
These are samples. Contact for more
Eucalyptus 20000m3
Pine 10000m3
Beech 5000m3
Spruce 5000m3
Teak 10000m3
Ayous 7000m3
Ash 10000m3
Poplar 10000m3
oak 3000m3
We supply round and sawn logs, sawn timber
Timber export SARL We are looking for serious buyers only. Hard and soft wood.
This are samples. Contact for more
Eucalyptus 20000m3
Pine 10000m3
Beech 5000m3
Spruce 5000m3
Teak 10000m3
Ayous 7000m3
Ash 10000m3
Poplar 10000m3
oak 3000m3
We supply round logs and sawn ab lumber
price from 150 to 800 euros
Discover the excellence of natural wood, feel the allure of its authenticity and intricate beauty, add a touch of classic aesthetics to your indoor and outdoor spaces, enhancing the ambiance of any environment.
Our Solid Wood Grills options offer craftsmanship from a variety of premium wood species, with options from Oak, Ash and more. With a range of available finishes, you can achieve the ideal aesthetic to match your design vision.
Beech veneer log:
Features:
-50 cm and up diameter x 2.7 - 2.8 - 2.9 and 3.0 meters and combinations of these lengths.
-Red heart max.
-25%, Fresh cut
-4 sides clear and straight.
- Control system - Digitally controlled
- Gluing Speed - 24 m/min
- Application Roller - Rubbed With Grooves
- Application Roller Diameter - 200 mm
- Inlet Traction Rubber Rollers - Yes
- Max Working Width - 300 mm
- Working Thickness - From 8 to 20 mm - Adjustable
- Adjustable Glue Application Thickness - Yes
- Dedusting Brushes - Inlet type â?? one brush up + one down
- Brushes Hood Outlet - 2x100 mm
- Total Power - 0.55 kW
- Dimensions - Cc. 585x555x1175 mm
- Weight - Cc. 180 kg
Overall dimensions mounted: lg 8.1 mx 2, 7 mxh 2m
Built entirely of galvanized steel chroming.
Vertical stroke 1170 mm
Longitudinal slide stroke 7000 mm
Cross slide stroke 1300 mm
Total weight 650 kg (depending on engine)
All movements are ball bearing.
The blade shaft is mounted on two conical roller bearings.
Trolley wheels are easily replaceable steel
380 v three-phase electric motor
Petrol engine briggs & stratton
Safety blade front and rear
Simultaneous vertical displacement of the assembly by a single crank
Accident all items can be replaced or repaired, beams, frames, truck, etc ....
Sawing capacity
Logs: maximum diameter of 1.4 m to 2 m and 6 m length maximum
Timber: 25 cm x 25 cm (26 cm x 26 cm optional)
Quarter sawn: 24 or 26 cm wide
Volume of daily flow: from 6 to 12 cubic meters of wood sciépendant as sawing continues on the other station. It allows to increase the daily capacity by eliminating the time-sawing between two logs.)
A portable sawmill ecopro2® includes:
A sawmill with capacity 25 cm x 25 cm x 6 m
A tilting system (this equipment allows to remove the waste and to position a new log without risk of collision logs / lumber mill in the open position while sawing continues on the other station. It increases daily capacity eliminating the time-sawing between two logs.)
A sharpener (sharpener helps sharpen the saw teeth without removing the blade.) (+ link to the video)
A toolbox
A blade diameter 630 mm
Technical Data K5-320 K5-400
Planer
Max. Planer Width mm 320 400
Work Table Length mm 1560 1920
Max. Planing Thickness mm 4 4
Cutter Shaft Speed R/min 5200 5200
Number Of Cutters 3 3
Cutter Shaft Dia. mm 86 86
El. Motor Power kW 2.2 3
Thicknesser
Max. Planer Width mm 320 400
Work Table Length mm 550 690
Max. Planing Thickness mm 180 220
Max. Planing Heigh mm 3 3
Cutter Shaft Speed R/min 5200 5200
Number Of Cutters 3 3
Feeds m/min 8 8
El. Motor Power kW 2.2 3
Boring Device
Table Dimensions mm 400/250 (500) 400/250 (500)
Longitudinal Travel mm 100 (150) 100 (150)
Cross Travel mm 100 (150) 100 (150)
Vertical Travel mm 100 (150) 100 (150)
Max. Drill Dia. mm 16 16
Drill Speed R/min 5200 5200
Spindel Moulder
Spindle Diameter mm 30 (50) 30 (50)
Spindle Speed R/min. 6000 6000
Vertical Stroke of Spindle mm 130 130
Max.Ttool Diameter mm 170 170
Dimensions Of Worktable mm 850 / 450 850 / 450
El. Motor Power kW 2.2 2.2
Circular Saw
Saw Blade Diameter mm 300 300
Saw Blade Speed R/min. 3700 3700
Max. Depth Of Cut mm 85 85
Dimensions Of Worktable mm 850 / 450 850 / 450
Spindle Dia. mm 30 30
El. Motor Power kW 2.2 2.2 or 3
Tenoning carriage
Dimensions of worktable mm 450/750 450/750
Machine dimensions
Net weight of the machine Kg 540 580
Length mm 1600 2000
Width mm 1140 1700
Height mm 1000 1100
Planer
Plate dimensions400 x 2300 mm
Front plate length 1110 mm
Rear license plate size 1110 mm
Max. Planing length 18 mm
Trench slope angle0-45
Blade qty 4
Top spindle speed 4000 rev / min
Top shaft diameter 105 mm
Saw tray
Plate dimensions 550 x 800 mm
Circular saw blade diameter 350-400 mm
Shaft diameter 30 mm
Tray spindle speed 3600
Drill
Plate dimensions 270 x 480 mm
Longitudinal motion 170 mm
Transversely action 135 mm
Vertical movement 160 mm
Drill diameter 20 mm
Machine
Motor force 4 hp
Dead weight 850 kg.
e equipment was manufactured by Jeffrey Rader AB, Sweden in 1995 and it is in very good operational condition. It consist of two heavy duty rolls with removable profilied surfaces which rotate towards each other and presses overzised wood chips between the profiles. Roll drives 2 x 110 kW / 1500 rpm connected with two gearboxes. Hydraulic pump 7.5 kW, capacity 220 m3/h wood chips.
The equipment was manufactured by Jeffrey Rader Inc, Sweden in year 1995, manufacturers type is DynaYield 80-300 and it is in good operational condition. The Chip Conditioner consists of two heavy duty rolls with removable profiled surfaces. They rotate towards each other and pull the oversize chips between them. The profiled surfaces are aligned so that the pyramid apexes on one roll travel in the valleys of the apexes on the adjacent roll. With normal oversize wood, the Conditioner typically generates less than 1% fines and 3% pins
The normal application for the Chip Conditioner is in a chemical pulping process, processing the oversize materials by fissuring the wood chips parallel with the grain to allow the cooking liquors to penetrate the chip, and allow the oversize chip to cook as an acceptable size chip. Another application is in a thermo-mechanical pulping process (TMP), as a preconditioning
An important feature of this machine is its ability to handle small portions of tramp without going off-line. With the so called Dynagage Conditioner, the dynamic roll is allowed to move away from the static roll, and once the tramp is through the unit, the roll automatically moves back to the proper set point without shutting down the flow and together with slow rotation speed enable were low down time and maintenance costs. Roll distance movements are made with a hydraulic system build on the equipment and controlled by 3 position sensors
More information on requests, for spam protection please introduce yourself properly.
Technical data:
Model: RDY 80-300
Manufacturing year: 1995
Capacity (throughput): 220 m3/h loose wood chips
Press roll diameter: 915 mm
Roll length: 2440 mm
Roll motors: 2 x 110 kW / 1500 rpm / 690 V – 50Hz
Press distance between the rolls: 2.2 mm
Gearboxes: 2 x Kipo Benzler TV 512
Hydraulic pump: Rexroth 200 bar with Mecman syliders
Electric motor for hydraulic pump: ASEA 7.5 kW
Weight: 33 000 kg
Length: 5083 mm
Width: 2550 mm
Height: 2400 mm.
689 Wood Raw Material Processed Related Machinery Suppliers
Short on time? Let Wood Raw Material Processed Related Machinery sellers contact you.
