Product Description
This Kit Arizona 6100 XTS Series Printhead is suitable for Oc Arizona 6100 and Fujifilm Acuity F series printers. This is the original Oc part (number 3010118098).
Product Description
This Kit F/S printhead CE2 is suitable for Oc Arizona 460 GT and Fujifilm Acuity Advance Select HD4006 printers. This is the original Oc part (number 3010114604 replaced by 3010115446).
Product Description
This Kit F/S Printhead CA4 is suitable for the Oc Arizona 350 GT / 350 XT printers. This is the original Oc part (number 3010108132).
Product Specifications
Technology: Multi-drop grayscale micro-piezo
Grayscale levels: 16
Active nozzles: 318
Print swathe width: 53.6 mm
Nozzle pitch: 169 �¼m
Native resolution: 150 dpi
Printhead weight: 148 g
Dimensions: 85 x 70 x 23 mm
Drop volume: 6 - 90 pl
Typical firing frequency: 2.8 - 28 kHz
Ink Compatibility: oil-based pigment ink and UV curable pigment ink
Product Description
This Ricoh GEN3-E3 (MH1603/1803/1903) printhead is suitable for DYSS Apollo UV R220 printers. This is the original Ricoh part.
Product Specifications
Size: 7.8 x 120 x 35 mm (excluding cables)
Head materials: SST, Pd and Epoxy Adhesive
Nozzle plate surface: Non-coated SST
Number of nozzles: 192 nozzles
Nozzle spacing: 0.3387 mm
Piezo type: D33 Stacked PZT
Temperature control: Integrated Heater and Thermistor
Operator temperature range: Up to 80�° C
Native drop volume: 30 pl - 45 pl
Drop volume range: 12-50 pl
Jetting frequency: Up to 30 kHZ
Life: 100 billion actuations per nozzle
Dimensions: 89 x 25 x 69 mm (excluding cables)
Head materials: SST, Nickel alloy and Epoxy Adhesive
Nozzle plate surface: Coated SST
Number of nozzles: 4 x 320 nozzles
Nozzle spacing: 0.1693 mm
Nozzle density: up to 600 npi
Piezo yype: D33 Stacked PZT
Temperature control: Integrated Heater and Thermistor
Operator temperature range: Up to 80�° C
Native drop volume: 7 pl
Drop volume range: 7 - 35 pl
Drop velocity: 7 m/s
Jetting frequency: Up to 60 kHZ
Life: 100 billion actuations per nozzle
Manufacturer:
Mimaki
Printer compatibility:
Mimaki JFX500-2131 / UJV500-160
DP part number :
PPHMI13301
This printhead GEN5 (MH5420/5440) is suitable for Mimaki JFX500-2131 & UJV500-160 printers. It has two and four colour support, 8 levels of grayscale and up to 600 npi nozzle density. This is the original Mimaki part (number M013497 / M015068).
173338 Electronics Communications Suppliers
Short on time? Let Electronics Communications sellers contact you.
Dimensions: 89 x 25 x 69 mm (excluding cables)
Head materials: SST, Nickel alloy and Epoxy Adhesive
Nozzle plate surface: Coated SST
Number of nozzles: 4 x 320 nozzles
Nozzle spacing: 0.1693 mm
Nozzle density: up to 600 npi
Piezo yype: D33 Stacked PZT
Temperature control: Integrated Heater and Thermistor
Operator temperature range: Up to 80 C
Native drop volume: 7 pl
Drop volume range: 7 - 35 pl
Drop velocity: 7 m/s
Jetting frequency: Up to 60 kHZ
Life: 100 billion actuations per nozzle
This Mimaki JF-1631 is supplied with head ID, voltage and waveform information.
Specifications
- Technology: On Demand Piezo Electric
- Max. Resolution: 1200 dpi
- Droplet Size: 6 to 90 pico litre
- Maximum Grayscale Levels: 16
- Tot. Amount of Nozzles: 318
- Nozzle Spacing: 169 microns
- Firing Frequency: 28 kHz (1 drop) - 2.8 kHz (15 drops)
- Driving Voltage: 14 - 31 V
- Ink Compatibility: Oil Based Pigment Ink and UV Ink
Printer compatibility:
Mimaki JF-1631 / JF-1610
This Mimaki JF-1631 / CA4 Print Head on-demand piezo electric inkjet print head is designed for industrial applications with high print quality. Unlike conventional binary print heads, this grayscale print head technology is capable of jetting multiple drops within one dot allowing for an image to have 16 levels of grey, since each dot is created through a minimum of 6 pico litre to a maximum of 90 pico litre of ink.
The Mimaki JF-1631 / CA4 Print Head is suitable for UV curable and Oil based inks, it has 2 ink inlet ports (which can be easily removed to be replaced with a 1 ink inlet assembly) and a chassis which provides a built-in water channel and complete sealing designed for easy temperature control. This is Mimaki original CA4 printhead without the bracket (corresponds to Mimaki part number M007278). It carries a one year product warranty.
An installation video is available in the video tab of this product and full installation instructions are included with the printhead. The JIG tools used to calibrate and fit this head are available as related products.
This printhead 5540 is suitable for Mimaki CJV300 & JV300 series printers. This is the original Mimaki part (number M015372 replacing number M015307). the calbe of this printhead is 354mm long and 30 mm wide.
Technology: Multi-drop grayscale micro-piezo
Grayscale levels: 16
Active nozzles: 318
Print swathe width: 53.6 mm
Nozzle pitch: 169 �¼m
Native resolution: 150 dpi
Printhead weight: 148 g
Dimensions: 85 x 70 x 23 mm
Drop volume: 6 - 90 pl
Typical firing frequency: 2.8 - 28 kHz
Ink Compatibility: oil-based pigment ink and UV curable pigment ink
Manufacturer:
Mimaki
Printer compatibility:
Mimaki UJV-160 / JFX / UJF
DP part number :
PPHMI7917
This Printhead Assy is suitable for the Mimaki UJV-160 / JFX / UJF Printers. This is the original Mimaki part (number M008386). It includes the metallic support for fixation. The same printhead without the metallic support is sold as part number KX-CE308644CS-CE4. The cables are 40.9cm long, 2.1cm wide and have 20 pins.
This Printhead Assy is suitable for the Mimaki UJV / JFX / UJF-706 Printers. This is the original Mimaki part (number KX-CE308644CS-Gen4). This part does not include the metallic bracket that can be easily re-used from the previous head. If the metallic bracket also needs to be replaced, part number M008386 should be purchased instead.
This Printhead Assy is suitable for Mimaki UJV-160 / JFX / UJF Printers. This is original Mimaki part (number M008386). It includes the metallic support for fixation. The same printhead without the metallic support is sold as part number KX-CE308644CS-CE4. The cables are 40.9cm long, 2.1cm wide and have 20 pins.
Hyundai HY4000SEi, 4000w Inverter Generator, 1 Year Warranty. The Hyundai HY4000SE generator set with petrol engine is designed to work in the most demanding conditions. It is a high performance tool to which any use can be applied, both professional machinery and more delicate electronic devices.
Its professional, compact design, with a panel with plastic protections, robust with high-resistance silencers and housings to reduce noise make this generator a very good choice. The 4000W Hyundai electric generator is designed for professional use and individuals who need a high-performance electric generator. It is applied in camping, camping, jobs where there is no electricity, reforms, nautical, motorhomes, energy source for country houses and well pumps.
Features:
4000 Watt Maximum Output
Petrol 4T OHV, Air-cooled
Manual and Electric Starting
7.8L Litre Fuel Tank Capacity
1 Year Warranty
Purchase products 2023 BMC Teammachine SLR01 One Road Bike at m3bikeshop provide a 100% money back guarantee and 100% safe. M3bikeshop is a real company in Jl. Wisata komplek Jcity Ruko Jsquare, Pangkalan Masyhur, Medan Johor, Medan City, North Sumatra 20146.
website Online Shop : https://m3bikeshop.com
Email : order@m3bikeshop.com
Whatsapp : +6282374716406
Price : USD 9000 /Units
Lead Time : 6 - 9 Days
Port : CIF / Kualanamu International Airport
Shipment : FedEx, DHL, UPS
Product : Original and Ready in stock
Terms : Bank Transfer, Western Union, Moneygram, Wise, Worldremit
173338 Electronics Communications Suppliers
Short on time? Let Electronics Communications sellers contact you.
