* Thermopile IR-Sensor
* For Contact less Temperature Measurement
* Single Element
* Small Package for Ear Thermometer
* High Signal
* Flat Filter
* Accurate Reference Sensor
DESCRIPTION
Thermopiles are mainly used for contact less temperature measurement in many applications. Their function is to transfer the heat radiation emitted from the objects into a voltage output.
FEATURES
* High Signal
* Ni-RTD Reference Sensor
* Small TO-18 Package
* 8-14µm Band Pass Filter for measurement distances >0.5m
Description
TSEV01CL55 is a contact-less temperature measuring system for OEM use based on the detection of infrared radiation.
TSEV01CL55 is equipped with an infrared sensor (Thermopile) in front. The Thermopile Sensor has to be pointed at the target object of interest.
The basic working principle is:
Detection of infrared radiation with a Thermopile sensor, which turns incoming radiation to an analogue voltage
Determination of sensor temperature using a thermistor
Further analogue signal processing and conditioning
Calculation of ambient and object temperature using a processing unit
Providing the ambient and objects temperature at digital output bus (I2C)
The TSEV01CL55 is suitable for a wide range of application where non-contact
The TSEV01CL55 is equipped with a silicon lens (back focal length = 5.5mm) to narrow the field of view.
I2C pull-up resistors are provided on the sensor.
The I2C interface does not block the clock for clock-stretching.
FEATURES
* 0'C - 300'C Measurement Range
* 4V - 16V Supply Voltage Range
* Up to 1.5% Accuracy
* 2mA Current Consumption
APPLICATIONS
* Contact less Temperature Measurement
* Climate Control
* Industrial Process Control
* Household Applications
GENERAL DESCRIPTION
GUVA-C32SM supports integrated functions of ultraviolet light sensors such that can be easily configured and used in user applications.
GUVA-C32SM comprises photodiodes, amplifiers, ADC, digital control logic and I2C interface circuit.GUVA-C32SM receives UVA and outputs digital count according to the intensity. Power consumption can be minimized by proper use of power management mode.
FEATURES
- UVA sensing with 16-bit resolution
- Support UV index measurement (0 - 16)
- Programmable gain and integration time
- I2C slave interface up to 400KHz
- Power management modes
- Shutdown current : 0.8uA typical
- Supply voltage of 2.2V to 3.6V
- 2.0mm x 2.3mm x 1.4mm ,4-pin COBpackage
1. Ftatures
- Chip size: 0.4mm, SMD 3528 PKG
- Aluminium Gallium Nitride Based Material
- Schottky-type Photodiode
- Photovoltaic Mode Operation
- Good Visible Blindness
- High Responsivity and Low Dark Current
MB7052
XL-MaxSonar-WRM1
High Performance Ultrasonic Precision Rangefinder
Product Description
The XL-MaxSonar-WRM1 ignores smaller targets and only reports the range to target with the largest acoustic return. This is one of our advanced weather resistant sensors designed for target detection and ranging outdoors or in tank or bin applications.
The weather resistant XL-MaxSonar-WRM1 is a rugged ultrasonic sensor component module. This outdoor sensor provides very short to long distance detection and ranging in a compact, robust PVC housing. The ultrasonic sensor meets the IP67 water intrusion standard and matches standard electrical 3/4â??inch PVC pipe fittings.
MB7052 Features and Benefits
* Clutter rejection provides range to the largest amplitude reflection within the field of view
* Real-time calibration, noise rejection and additional filtering provides stable range information
* Excellent for ranging to large objects in the presence of cluttered or noisy environments
* Excellent for applications that require consistently accurate outputs
* Impressive acoustic and electrical noise resistance
* 6.6Hz refresh rate on the MB7052
MB7052 Applications and Uses
* Autonomous Navigation
* Environments with acoustic and electrical noise
*Bin Level Measurement
* Tank Level Measurement
z
162753 Electronics Communications Suppliers
Short on time? Let Electronics Communications sellers contact you.
FEATURES
* Oxygen pressure range 2 mbar - 3bar
* Zirconium dioxide (ZrO2 ) sensing elements
* Non-consumption technology
* Integral heating element
* No need for temperature stabilisation
* No reference gas required
* High accuracy
* Linear output signal
* Operates with external interface boards
SPECIFICATIONS
Heater Voltage
Porous Cap (15mm) 4.35V DC ± 0.1V DC (1.85A)
Stand by 2V DC (0.85A)
Pump resistance @ 700'C < 6kâ?¦
Permissible gas temperature -100 to 250'C
Gas flow rate 0 to 10 m/s
Repetitive permissible acceleration 5 g
Incidental permissible acceleration 30 g
1.Features
Gallium Nitride Based Material
Schottky-type Photodiode
Photovoltaic Mode Operation
Good Visible Blindness
High Responsivity & Low Dark Current
2.Applications
UV Index Monitoring
UV-A Lamp Monitoring
1. Features
Aluminium Gallium Nitride Based Material
Schottky-type Photodiode
Photovoltaic Mode Operation
Good Visible Blindness
High Responsivity & Low Dark Current
FEATURES
* Provides the electronics necessary to power and control SST's range of zirconium dioxide (ZrO2 ) sensors
* Externally triggered automatic or manual calibration. Calibration can also be initiated via an on-board push button
* Power and sensor operating LEDs
* Removable polarised screw terminals for easy wiring
BENEFITS
* Adaptive software filtering provides a fast sensor response coupled with a stable oxygen output
* High accuracy linear output
* Can be calibrated in fresh air (20.7% O2 ) o r in any other known O2 concentration
FOT-L Temperature Sensors Fiber Optic Temperature Sensors
The FOT-L-SD and FOT-L-BA are fiber optic temperature sensors perfectly suited for harsh environmental conditions such as in cryogenics, nuclear, microwave, and strong RF applications. The FOT-L temperature sensors combine all the desired characteristics you would expect from the ideal sensor. These temperature sensors offer accuracy and reliability in extreme temperature and hostile environments.
Features:
Intrinsically safe
Up to 300'C (572'F)
High accuracy
Miniature and rugged sensor
Applications:
Microwaves and RF;
Medical applications;
Nuclear environments;
In-situ process monitoring;
Harsh and hazardous environments;
High temperature environments
Aerospace applications
Specifications:
1) Temperature range:
FOT-L-SD -40'C to 300'C ( -40'F to 572'F)
FOT-L-BA - 40'C to 250'C ( -40'F to 482'F)
2) Resolution (*1) : 0.1'C
3) Accuracy (*2) : ±1'C
4) Response time:
FOT-L â?¤1.5 second
FOT-L-BA â?¤0.5 second
5) Connector type: ST connector
*1. Signal conditioner dependent.
*2. ±0.5'C is attainable when using a reduced temperature range of 20'C to 85'C (68'F to 185'F).
MinIR is an ultra low power (3.5mW4 ), high performance CO2 sensor, ideally suited for battery operation and portable instruments. Based on patented IR LED and Detector technology and innovative optical designs, MinIR is a third generation product from Gas Sensing Solutions Ltd - leaders in IR LED CO2 sensing.
Ultra-low Power 3.5mW
Measurement ranges from 0 to 100%
3.3V supply.
Peak current only 33mA.
Compact 20mm diameter package
Ultra Low Power NDIR CO2 Sensor Carbon Dioxide Sensor 0-100% VOL
Summary
COZIR is an ultra low power (3.5mW4), high performance CO2 sensor,ideally suited for battery operation, portable instruments and HVAC.
Based on GSS IR LED and Detector technology, and innovative optical designs, the COZIR offers the lowest power NDIR sensor available.Optional temperature, humidity and light sensing are available.
COZIR is a third generation product from GSS - leaders in IR LED CO2 sensing.
Specification
1) Ultra-low Power 3.5mW
2) Measurement ranges from 5% to 100%
3) 3.3V supply.
4) Peak current only 33mA.
5) Optional Temperature and Humidity Output
6) Can be made by analog output ( this option can not together with temperature & humidity output)
Electrical
Frequency Range 698-960/1710-2700MHz
Band width 262/990MHz
F/B Ratio ï¼?20dB
Gain 5/7dBi
V.S.W.R â?¤2.0
Radiation Direction
Horizontal Beam width 68°
Vertical Beam width 58°
Polarization Vertical
Lightning Protection DC-Grounded
Maximum Input Power 50W
Impedance 50�
Connector N Female
Cable Type RG58U
Cable Length 30cm
Antenna Radome Material ABS
Mount way Wall Mount Or Pole Mount
Diameter of Installation Pole Ã?30-Ã?50mm
Mechanical
Dimensions 207Ã?180Ã?45mm
Weight 0.5KG
Rated wind velocity(m/s) 60
Operating Temperature -40â?? to+70â??
RoHS Compliant YES
Electrical
Operating Frequency 902-928 MHz
Band width 26 MHz
Gain 15 dBi
F/B Ratio â?¥30 dB
Polarization Vertical or Horizontal
Horizontal Beam width 10°
Vertical Beam width 14°
V.S.W.R â?¤1.5
Lightning Protection DC-Grounded
Radiation Direction
Maximum Input Power 100W
Impedance 50�
Connector N Female
Cable Type LMR400
Cable Length 30 CM
Mount way Pole
Diameter of Installation Pole Ã?30~Ã?50mm
Mechanical
Dimensions 600x900mm
Weight 3.5KG
Rated wind velocity(m/s) 241Km/h
Operating Temperature -40° to +80°C
RoHS Compliant Yes
Vasthi uses heated probe to collect the sample from the sample line, it will maintain constant temperature and removes the dust and mist from the sample gas. This gas sample passes through electrically heated tube to cooler. It will remove the vapour content and cools the gas sample to 5áµ?c dew point range and this sample gas goes through the filter that eliminates the dust particle remaining and finally sensor senses and gives the exact readings in syngas analyzer.
This instrument adopts the pulse xenon lamp as light source and the ultraviolet optical fiber spectrometer as detector is capable for real-time gathering of absorption spectrum of water pollutants ranging from 200nm to 800nm and real-time analysis of the content of water pollutants by means of chemometric algorithm technology. Optical path as shown below.For more information.
