ZE08-CH2O Electrochemical CH2O Detection Module Profile
ZE08-CH2O is a general-purpose and miniaturization electrochemical formaldehyde detection module. It utilizes electrochemical principle to detect CH2O in air which makes the module with high selectivity and stability. It is built-in temperature sensor to make temperature compensation. It has the digital output and analog voltage output at the same time. It is a combination of mature electrochemical detection principle and sophisticated circuit design.
ZE08-CH2O Electrochemical CH2O Detection Module Features
* High sensitivity &resolution, Low power consumption, Long life
* UART/Analog Voltage/PWM wave output
* Good stability, excellent ability of Anti-interference
* Temperature compensation , Excellent Linear output
ZE08-CH2O Electrochemical CH2O Detection Module Main Application
Portable detector, air-quality monitor, air cleaner, air renewal system, air conditioner, smart home.
ZE08-CH2O Electrochemical CH2O Detection Module Technical Parameters
* Target Gas: CH2O
* Interference Gas: Alcohol, CO &ect.
* Working Voltageâ??: 3.7V~9V
* Response time: â?¤60s
* Detection Range: 0~5ppm
* â??Resolution: â?¤0.01ppmâ??
* Operating Temp.: 0~50â??
* Operating Hum.: 15%RH - 90%RH(No condensation)
* Working life: 2 years (in air)
SPD005GAsmd 5 psi Gauge Pressure Sensor with Analogue Output Description
This pressure sensor has an amplified analogue output. The sensor is compensated for offset, sensitivity, temperature drift and nonlinearity.
The sensor is available in the range from 5 to 100 psi. Other ranges on request. Available in Gauge and Absolute type. The output is ratiometric to the power supply voltage. @ 5 V power voltage the output span is 0.5 to 4.5 V. The SPD analogue series can be considered as an analogue successor of the SPD series.
* PM1 , PM2.5 and PM10
* Reduced power standby mode
* Capability to measure up to 2,000 µ g/m 3
* Onboard temperature and humidity sensor
* SPI interface not included, order code 000-0SPI-00
OPC-N3 PM2.5 Particle Sensor SPECIFICATIONS
* Particle range: 0.38 to 40 Spherical equivalent size
* Size categorisation: 24 Number of software bins
* Total flow rate (typical): 1.2 L/min
* Sample flow rate (typical): 220 mL/min
* Voltage range: 4.8 to 5.2 VDC
* Temperature range: -10 to 50°C
* Humidity range: 0 to 95 % rh non-condensing
*Weight: < 105g
Sonic-anemo-sdi ultrasonic wind speed sensor description
Sonic-anemo-sdi is made from the cv7-v to which a sdi12 protocol and optimizing electrical consumption has been added. Sample rate is 2 hz.
This ultrasonic wind sensor operates in a request-response mode.
This product is more energy-efficient than standard units.
The sonic-anemo-sdi is dedicated to meteorological applications.
Sonic-anemo-sdi ultrasonic wind speed sensor available data:
- average speed and direction over 10 minutes
- minimum wind speed and direction for that period
- maximum wind speed (gust 3s) and direction for that period
- software version and serial number
- data measurement quality rate from the sensor
- data for sensor diagnostic (manufacturer use only)
Sonic-anemo-sdi ultrasonic wind speed sensor specification:
* output data format: sdi-12 v1.3
* information transmited: inst. W. Speed, w. Angle, gust ws/wa, avg, min, max, avaibility
* output rate: 2 hz / 30 hz measurement
* wind module sensitivity: 0.12 m/s
* wind module resolution: 0.05 m/s
* wind module dynamic: 0.12 to 40 m/s
* direction sensitivity: +/-1.5'
* direction resolution: 1'
* power supply: 2.7 v to 35 v dc
* electrical consumption: 2.9 ma avg. @ 12 v
* op. Temp. Without icing: -15'c to +55'c
* cable: 5 m / 3 x 0.22 mm2 uv proof
* connection: 3 wires
* weight of unit assembly: 200 gr with mounting parts.
Mb1003 hrlv-maxsonar-ez0
High performance ultrasonic rangefinder
Mb1003 hrlv-maxsonar-ez0 ultrasonic rangefinder product description
The hrlv-maxsonar-ez0 has the widest and most sensitive beam pattern of any unit from hrlv-maxsonar-ez sensor line. This makes the hrlv-maxsonar-ez0 an excellent choice for use where high sensitivity, wide beam, or people detection is desired.
Mb1003 hrlv-maxsonar-ez0 ultrasonic rangefinder product specifiations
* resolution of 1-mm
* 10hz reading rate
* 42khz ultrasonic sensor measures distance to objects
* rohs compliant
* maximum range of 5000 mm (195 inches)
* operates from 2.5v-5.5v
* low 3.1ma average current requirement
* operational temperature from 0'c to +65'c
Mb1003 hrlv-maxsonar-ez0 ultrasonic rangefinder features and benefits
* factory calibrated wide beam width
* low operating voltages from 2.5v to 5.5v
* all range outputs are active simultaneously
* high acoustic sensitivity
* detects small targets to longer distances
* widest beam width for the hrlv-maxsonar-ez sensors
Mb1003 hrlv-maxsonar-ez0 ultrasonic rangefinder applications and uses
* people detection
* small target detection
* high sensitivity applications
* obstacle avoidance.
Mb7137 i2cxl-trashsonar-wr
High performance ultrasonic trash bin measurement
Mb7137 i2cxl-trashsonar-wr ultrasonic sensor product description
The mb7137 i2cxl-trashsonar-wr is a weather resistant sensor designed for trash bin measurement.
The mb7137 i2cxl-trashsonar-wr features the i2c communication interface. This allows for up to 127 sensors to be operated on a single bus for a network of trash bins that are monitored by a single control device for multiâ??sensor operation.
High output acoustic power combined with continuously variable gain, real-time background automatic calibration, real-time waveform signature analysis, and noise rejection algorithms results in virtually noise free distance readings. This holds true even in the presence of many of the various acoustic or electric noise sources. The i2cxl-trashsonar-wr sensors are factory calibrated to match narrow sensor beam patterns and provide reliable mid-range detection zones.
Mb7139 is the standard version of this sensor.
Mb7137 i2cxl-trashsonar-wr ultrasonic sensor product specifiations
* resolution of 1 cm
* up to 20hz read rate
* 42khz ultrasonic sensor measures distance to objects
* rohs compliant
* operates from 3.0-5.5v
* low 3.4ma average current requirement
* maximum range of 350 cm (138 inches)
* compatible with up to a 400khz i2c bus speed
Mb7137 i2cxl-trashsonar-wr ultrasonic sensor features and benefits
* real-time calibration, noise rejection and additional filtering provides stable range information
* excellent for applications that require consistently accurate outputs
* impressive acoustic and electrical noise resistance
Mb7137 i2cxl-trashsonar-wr ultrasonic sensor applications and uses
* autonomous navigation
* environments with acoustic and electrical noise
* bin level measurement
* tank level measurement
Cv7-e ultrasonic wind speed sensor description
The cv7-e is easily integrated into measurement and monitoring systems. Detects gusts with great responsiveness and low latency. The cv7-e is powered by 8-30 vdc power supply and it outputs rs232 / rs422 / 5 v level signal / nmea0183.
The cv7-e shows a data rate twice faster than the cv7 and cv7-v with a data output 4 per second.
The small size of this sensor makes it very discreet.
Like every lcj capteurs products, cv7-e is energy efficient.
Cv7-e has proved its value with universities â??laboratories, scientific and wind tunnels successful tests.
It can be used connected to a pc and to any system featuring a nmeaâ® input port.
Cv7-e ultrasonic wind speed sensor specification:
* output data format: nmea0183, mwv, xdr
* information transmited: instant. W. Speed, instant. W. Angle, avaibility
* output rate: 4 hz / 60 hz measurement
* wind module sensitivity: 0.12 m/s
* wind module resolution: 0.05 m/s
* wind module dynamic: 0.12 to 40 m/s
* direction sensitivity: +/-1.5'
* direction resolution: 1'
* power supply: 8 v to 30 v dc
* electrical consumption: 9 ma
* op. Temp. Without icing: -15'c to +50'c
* cable: 25 cm / 4 x 0.22 mm2, 20 g/m
* connection: 4 wires
* weight of the head: 100 gr
* weight of unit assembly: 200 gr with mounting parts.
Y504-a dissolved oxygen sensor description
The sensor is based on optical fluorescence lifetime quenching technique. Its technical procedure meets astm d888-09 standard for optical sensing of dissolved oxygen. This online sensor is developed to integrate with yosemite wireless monitoring system. Its rugged design and large measurement range make it ideal for sampling, flow cell, ground water and waste water measurements.
Y504-a dissolved oxygen sensor applications
Fish farmer, waste water plant, river, stream, and ocean monitoring
Y504-a dissolved oxygen sensor feature
, 0-20mg/l or 0-200% saturation
, 0~50'c; ip68 rating
, membraneless, no electrodes design
, no oxygen consumption
, flow independent
, automatic temperature compensation
, no h2s interference
, low drift, fast response, and more accurate
, low maintenance, low operating cost
, easy sensor cap replacement
, rs-485; modbus protocol compatible
AC Digital Voltage Meter AD26B-22VM
1. Certification for Voltage Meter: CE CCC
2. Voltage Meter Diameter : 22mm
3. Display Type: Three led digitats
4. Measuring Voltage: AC 0-500V
5. Accurancy Class:1.5
6. Vibration Frequency:60 Hz
7. Head Protection Index:IP65
8. Material of Shell: Plastic ABS
9. Display Color: Red, Yellow,Blue, White
10. Operating Temperature -25 Celsius + 55 Celsius No freezing
11. Enviroment Humidity:from 45 to 85 Percent RH No freezing
12. Life of continuous working: 30,000 hours
Packaging and Shipping Details
1. 10pcs/box 1000pcs per CTN
2. Carton: 67*33.5*33cm Weight: 20 KG
3. Shipping within 7 days
4. By sea,By air or By Express ( DHL,TNT, UPS Fedex)
Services
1. Free samples are available !
2. All staffes are experienced.
3. Products are 100 percent checked and tested before launching.
4. The materials such as Led chips,Capacitors,Resistors,ABS are good.
5. Payment:30 percent deposit in advance,70 percent balance before shipping.
AC Digital Voltage Meter AD26B-22VM
1. Certification for Voltage Meter: CE CCC
2. Voltage Meter Diameter : 22mm
3. Display Type: Three led digitats
4. Measuring Voltage: AC 0-500V
5. Accurancy Class:1.5
6. Vibration Frequency:60 Hz
7. Head Protection Index:IP65
8. Material of Shell: Plastic ABS
9. Display Color: Red, Yellow,Blue, White
10. Operating Temperature -25 Celsius + 55 Celsius No freezing
11. Enviroment Humidity:from 45 to 85 Percent RH No freezing
12. Life of continuous working: 30,000 hours
Packaging and Shipping Details
1. 10pcs/box 1000pcs per CTN
2. Carton: 67*33.5*33cm Weight: 20 KG
3. Shipping within 7 days
4. By sea,By air or By Express ( DHL,TNT, UPS Fedex)
Services
1. Free samples are available !
2. All staffes are experienced.
3. Products are 100 percent checked and tested before launching.
4. The materials such as Led chips,Capacitors,Resistors,ABS are good.
5. Payment:30 percent deposit in advance,70 percent balance before shipping.
AC Digital Voltmeter AD26B-22VM
1. Certification for Voltmeter: CE CCC
2. Voltmeter Diameter : 22mm
3. Display Type: Three led digitats
4. Measuring Voltage: AC 0-500V
5. Accurancy Class:1.5
6. Vibration Frequency:60 Hz
7. Head Protection Index:IP65
8. Material of Shell: Plastic ABS
9. Display Color: Red, Yellow,Blue, White
10. Operating Temperature -25 Celsius + 55 Celsius No freezing
11. Enviroment Humidity:from 45 to 85 Percent RH No freezing
12. Life of continuous working: 30,000 hours
Packaging and Shipping Details
1. 10pcs/box 1000pcs per CTN
2. Carton: 67*33.5*33cm Weight: 20 KG
3. Shipping within 7 days
4. By sea,By air or By Express ( DHL,TNT, UPS Fedex)
Services
1. Free samples are available !
2. All staffes are experienced.
3. Products are 100 percent checked and tested before launching.
4. The materials such as Led chips,Capacitors,Resistors,ABS are good.
5. Payment:30 percent deposit in advance,70 percent balance before shipping.
AC Digital Voltmeter AD26B-22VM
1. Certification for Voltmeter: CE CCC
2. Voltmeter Diameter : 22mm
3. Display Type: Three led digitats
4. Measuring Voltage: AC 0-500V
5. Accurancy Class:1.5
6. Vibration Frequency:60 Hz
7. Head Protection Index:IP65
8. Material of Shell: Plastic ABS
9. Display Color: Red, Yellow,Blue, White
10. Operating Temperature -25 Celsius + 55 Celsius No freezing
11. Enviroment Humidity:from 45 to 85 Percent RH No freezing
12. Life of continuous working: 30,000 hours
Packaging and Shipping Details
1. 10pcs/box 1000pcs per CTN
2. Carton: 67*33.5*33cm Weight: 20 KG
3. Shipping within 7 days
4. By sea,By air or By Express ( DHL,TNT, UPS Fedex)
Services
1. Free samples are available !
2. All staffes are experienced.
3. Products are 100 percent checked and tested before launching.
4. The materials such as Led chips,Capacitors,Resistors,ABS are good.
5. Payment:30 percent deposit in advance,70 percent balance before shipping.
AC Digital Voltmeter AD26B-22VM
1. Certification for Voltmeter: CE CCC
2. Voltmeter Diameter : 22mm
3. Display Type: Three led digitats
4. Measuring Voltage: AC 0-500V
5. Accurancy Class:1.5
6. Vibration Frequency:60 Hz
7. Head Protection Index:IP65
8. Material of Shell: Plastic ABS
9. Display Color: Red, Yellow,Blue, White
10. Operating Temperature -25 Celsius + 55 Celsius No freezing
11. Enviroment Humidity:from 45 to 85 Percent RH No freezing
12. Life of continuous working: 30,000 hours
Packaging and Shipping Details
1. 10pcs/box 1000pcs per CTN
2. Carton: 67*33.5*33cm Weight: 20 KG
3. Shipping within 7 days
4. By sea,By air or By Express ( DHL,TNT, UPS Fedex)
Services
1. Free samples are available !
2. All staffes are experienced.
3. Products are 100 percent checked and tested before launching.
4. The materials such as Led chips,Capacitors,Resistors,ABS are good.
5. Payment:30 percent deposit in advance,70 percent balance before shipping.
Figaro's carbon monoxide sensor fecs40-1000 is a unique electrochemical-type carbon monoxide sensor. Its most notable feature is its unique leak-proof structure, making it ideal for co monitors and detectors in various fields.
Fecs40-1000 carbon monoxide (co) sensor features:
* high sensitivity/selectivity to co
* quick response to co
* linear output
* long life
* stable baseline
* unique leak-proof structure
Fecs40-1000 carbon monoxide (co) sensor applications:
* portable and fixed installation co monitors
* co detectors
* ventilation control for indoor parking garages
3SP_O3_5 P O3 Sensor DESCRIPTION
SPECâ??s printed sensors offer the performance of the best quality electrochemical sensors at a fraction of the price. SPECâ??s printed sensors are also ultra-thin, offering easy integration into wireless, portable, and networked solutions. These sensors are ideal for health, environmental, industrial and residential monitoring, because of their high performance, low cost and small size.
3SP_O3_5 P O3 Sensor BENEFITS
* Small Size with Low Profile (20x20x3 mm)
* Long Life (10 years expected life)
* Fast Response (< 15 seconds)
* Low Power Consumption
* Individually Calibrated (NIST Traceable)
* ROHS Compliant
* Improved stability and ppb performance
3SP_O3_5 P O3 Sensor APPLICATIONS
* Air Quality Monitoring
* Industrial Safety
* Air Purification Control
3SP_O3_5 P O3 Sensor SPECIFICATIONS
* Measurement Range: 0 to 5 ppm
* Lower Detection Limit: < 20 ppb (instrumentation dependent)
* Resolution: < 20 ppb (instrumentation dependent)
* Response Time: < 15 seconds typical
* Sensitivity nA/ppm @ 5ppm: -60 +/- 10 nA/ppm
* Expected Operating Life: > 5 years (10 years @ 23+/-3'C; 40+/-10% RH)
* Operating Temperature Range: -30 to 50'C (-20 to 40'C continuous)
* Operating Humidity Range - non-condensin: 0 to 100% RH (15 to 95% continuous)
* Power Consumption: 10 to 50 uW (circuit & ambient O3 dependent)
DGS-CO 968-034 Digital CO Sensor Module DESCRIPTION
Easily add Carbon Monoxide sensing to your IoT application with our digital CO sensor module that provides a calibrated and temperature compensated output.
0 to 1000 ppm Carbon Monoxide sensor with digital output
DGS-CO 968-034 Digital CO Sensor Module BENEFITS
* Low Power - 1 mW @ 1 minute sampling
* Fast Response - 15 seconds typical
* Calibrated & Temp. Compensated Output
* Simple Digital UART Interface
* Integrated T & RH Sensors
* Robust 10-year Estimated Lifetime
* ROHS Compliant
* Small form Factor
* UART to USB adapter provided
* Lightweight (< 2 oz.)
DGS-CO 968-034 Digital CO Sensor Module APPLICATIONS
* Life Safety Levels
* Air Quality Levels
DGS-CO 968-034 Digital CO Sensor Module MEASUREMENT PERFORMANCE CHARACTERISTICS
Based on Standard Conditions 25'C, 50% RH and 1 atm
* Measurement Range: 0 to 1000 ppm
* Resolution: 0.1 ppm
* Zero Accuracy:± 1 ppm
* Measurement Accuracy: 15% of reading
* Measurement Repeatability: <± 3% of reading or 2 ppm, whichever is greater
* T90 Response Time (100 ppm step): < 30 seconds (15 seconds typical)
Figaro's Nitric Oxide Sensor FECS41-250 is a unique electrochemical-type nitric oxide sensor. Its most notable feature is its unique leak-proof structure, making it ideal for NO monitors and detectors in various fields.
FECS41-250 Nitric Oxide (NO) Sensor Features:
* High sensitivity/selectivity to NO
* Quick response to NO
* Linear output
* Long life
* Stable baseline
* Unique leak-proof structure
FECS41-250 Nitric Oxide (NO) Sensor Applications:
* Portable and fixed installation NO monitors
* NO detectors
* Ventilation control for indoor parking garages
