Function AC leak currentú¼high-harmonic currentú¼0n line current testú¼phaseíóelectrical energyú¼power factor revise
Test mode Clip-onCT
Output mode Current mutual inductance output uA/mAú+mA/A or voltage output mV/mAú+mV/Aú¿lectotypeú¬
Dimensions Widthí-heightí-thicknessú¦64mmí-160mmí-23mm
Clamp mouth ª+40mm
Wire length 2.0mú¿by orderú¬
Measure range AC 1uAí½80Aú+10uAí½300Aú+10mAí½600Aú¿lectotypeú¬
Resolution 1uAú+10uAú+5mAú¿lectotypeú¬
Accuracy 1% ú+2%ú¿50Hzú+25íµí+3íµú¬ú¿lectotypeú¬
Linearity degree 1% ú+2%ú¿50Hzú+25íµú¬ú¿lectotypeú¬
Work frequency 10í½100KHz
Wire voltage Line test under AC600V
Quality About120g
Working temperature and humidity -25íµí½70íµú+below 80%rh
Storage temperature and humidity -10íµí½60íµú+below 70%rh
Insulation AC2kV/rms (between core and box)
Applicable safety rules IEC1010-1íóIEC1010-2-032íópollution, etc 2íóCAT ó=(600V).
Specifications
Function AC leak currentú¼high-harmonic currentú¼0n line current testú¼phaseíóelectrical energyú¼power factor revise
Test mode Clip-onCT
Output mode Current mutual inductance output uA/mAú+mA/A or voltage output mV/mAú+mV/Aú¿lectotypeú¬
Dimensions Widthí-heightí-thicknessú¦138mmí-42mmí-20mm
Clamp mouth ª+7.5mm
Wire length 2.0mú¿by orderú¬
Measure range AC 1uAí½10Aú+ 5uAí½20Aú+10uAí½50A
Resolution 1uAú+5uA ú¦10uAú+ú¿lectotypeú¬
Accuracy 0.1-0.2ú¿50Hzú+25íµú¬
Ungraded load í_50ª+
Work frequency 10í½100KHz
Wire voltage Line test under AC600V
Quality About175g
Working temperature and humidity -25íµí½70íµú+below 80%rh
Storage temperature and humidity -10íµí½60íµú+below 70%rh
Insulation AC2kV/rms (between core and box)
Applicable safety rules IEC1010-1íóIEC1010-2-032íópollution, etc 2íóCAT ó=(600V).
It is applicable in many properties test of plastic films, complex films, flexible packaging materials, adhesives, adhesive tapes, glue, rubber, paper, and plastic aluminum board.
The test items include tensile, peel, ripping, hot-seal, shear, etc.
The tester is the basic instrument for testing the anti-bursting degree of paper and cardboard. It conforms to the standards of iso2758, iso2759 (standard testing for cardboard bursting strength) and gb1539 (method for testing cardboard bursting strength). It adopts signal transmitting press. When the specimen is burst, the tester stores the maximum of bursting strength automatically.
1. This machine adopts oil cylinder overhead (underneath) type structure, hydraulic load, hydraulic or manually clamping specimen.
2. The main machine is separated with ergo meter, connected by high-pressure oil pipe and wire, avoiding the influence of ergo meter degree when the specimen is breaking, which makes the value accurate.
3. Testing force indicator dial adopts closed type, which makes scale clear.
4. Loading speed indicator makes operation more convenient. It has three kinds speed: 0.4 rotor/min, 0.8rotor/min and 2rotor/min.
5. Automatic tracer is installed upright of ergo meter shell and can magnify the straining original shape by 2 or 4 times according to the requirements of test.
Host machine 8505652400 9006002550 11209003010 12609004000
Ergo meter 10708101730
Weightú¿kgú¬ 1440 2740 3040 4340
295 Electronic Testers Suppliers
Short on time? Let Electronic Testers sellers contact you.
Product Name BEST-898D Lead-free Hot Air Gun with Helical Wind +Rework Station
Order No NO.A011
Product class best production series
Sensor close loop control the temperature, large power,rapid heating,accurate and stable temperature in regardless of air volume.realize put non-lead soldering and de-soldering in to effect. Volution airflow adjustment,large but incomparable soft airflow. Have adjusted temperature functions.Easy to use,Intelligent cooling system,can prolong the service life of element and protect the hot air gun,Auto stop1 minute operation. Adopt small crust,durable,handsome,engross little place. Brushless fan,low noise.
MODEL Rated Voltage Power Consumption Air Pump Air Flow Temp.Control Length of Handle Noise
898D AV110V/220V
50Hz/60Hz 700w /
Soft airflow 120L/min(Max) 100-450 120cm <45db
898A
Solder Equipment
Power Consumption Out Voltage
Temp.Control Ground Resistance Heater
1.Sensor closed loop control the temperature, high power,rapid heating,accurate and stable temperature not affected by the air volume, truly effect non-lead soldering and de-soldering.
2.Volution airflow adjustment, large but incomparable soft airflow.Have adjusted temperature functions,Easy to operate.
3.Intelligent cooling system,can prolong the service life of element and protect the hot air gun,the power will be cut off automatically 1 minute after you turn hot air gun off .
4.Adopt miniature design so that it can save the desk space.Aslo it is nice and durable.
5.import brushless fan,low noise.
Product Name BEST-850 SMD Rework Station
Order No NO.A013
Product Class BEST production series
Closed loop sensor temperature control.Maintains a constant set temperature when the set temperature is reached.Electrostatic discharge safe design with grounding measure.
Specifications
Power
Input Power Consumption Temperature Range weight Pump
/.Motor Type Air Capacity Station Dimensions
(mm) Heating Element
Available in
110V/
220V 500W 100-550 3.7kg Diaphragm Pump 23L/min(max) 188W*
127H*
244D Metal Heating Core
Order No NO.B006
Product class best production series
Anti-static,quick rise temperature,guaranteed safe.External calibration for accurate temperature. Detachable handles for easy replacement.
Power Input Power Consumption Temperature Range Heating Element Weight
Available in 110V/220V 35W 200-480 Ceramic Heater 1.9kg
Output Voltage Tip to Ground Resistance Tip to Ground Potential Station Dimensions(mm)
24V Below 2ohms Below 2mV 120(w)*80(H)*140(D)
Our dol starter comes with inbuilt single phase preventor & auto start unit.The multi tester detects the presence of ac voltage by remote sensing without actually touching the live wire
Wide measuring range, for all metallic materials
Direct display of hardness scales hrb, hrc, hv, hb, hs, hl
Conversion to tensile strength (u.T.S.)
Test at any angle, even upside down
Removable printer included
Six impact devices are available for special applications
Large lcd display showing all functions and parameters
Battery low indication
New function of software calibration
Power charging indication on the keyboard led
Fault distinguish in details
transform between hl/hrc/hrb/hb/hv/hs.
store the latest 250 groups measurements.
select measured material and way by key.
can show measurements repeatedly to remove the large errors.
use usb data output with connection pc.
provide bluetooth data output choice.
Product parameters
Accuracy
Display error 0.8% at ld=900
Measuring range:200~900 hld
Measurable material:9 different common materials
Operating temperature:-10°c~50°c°c
Relative humidity:90%
Size:140x70x30 mm
Power supply2x1.5vaaa um-4 battery
Weight:130 g (not including batteries)
The shore hardness tester as-120 series including type(a, b, c, d, e, o, do, oo), model complete, with different probe size, use for different measured objects and hardness value, to meet different request for kinds of material hardness measure. integrated design, small volume, light weight, simple structure, easy to use, intuitive readings and automatic shutdown function.
with low battery alarm indicator & average value calculation function.
auto switch off and manual shutdown.
use usb data output with connection pc.
provide bluetooth data output choice.
Accuracy1h
Resolution:0.1h
Range:1090h
Operating temperature:040°c
Size:170x63x24 mm
Power supply2x1.5vaaa um-4 battery
Weight:310 g (not including batteries)
Oxygen Index Tester ISO 4589-2: Ensuring Fire Resistance Compliance
The Oxygen Index Tester ISO 4589-2 is an essential fire testing equipment used to determine the minimum oxygen concentration needed for a material to sustain combustion. This test is crucial for assessing the flammability characteristics of materials, especially those used in industries where fire safety is critical, such as construction, automotive, and aviation. The ISO 4589-2 standard provides a reliable and standardized method for determining the oxygen index (OI) of materials, which helps ensure compliance with fire resistance and safety regulations.
At KDM Global, we manufacture high-quality Oxygen Index Testers that comply with the ISO 4589-2 standard, offering industries a reliable tool to evaluate material flammability and safety.
Standards:
The Oxygen Index Tester is designed to meet the following key standard:
ISO 4589-2: This standard defines the method for determining the oxygen index of a material. The oxygen index (OI) is the minimum concentration of oxygen in a mixture of oxygen and nitrogen required for a material to sustain combustion. The higher the oxygen index, the more fire-resistant the material is. ISO 4589-2 is widely used to assess the flammability of materials used in applications such as building materials, textiles, and electrical components.
How It Works:
The Oxygen Index Tester â?? ISO 4589-2 works by exposing a sample of the material to a controlled mixture of oxygen and nitrogen gases. The apparatus then measures the oxygen concentration at which the material continues to burn or self-extinguish. The test results are reported as the oxygen index (OI), which reflects the fire-resistance properties of the material.
Sample Preparation: A standardized sample is placed vertically in the test chamber.
Mixture of Gases: The sample is exposed to varying concentrations of oxygen and nitrogen.
Flame Behavior Analysis: The material is ignited and observed to determine if it will sustain combustion at specific oxygen concentrations.
Oxygen Index Calculation: The minimum oxygen concentration required for combustion is calculated and reported as the oxygen index.
Key Features:
Compliance with ISO 4589-2: Fully compliant with ISO 4589-2, ensuring accurate and standardized testing for oxygen index determination.
Precise Measurements: Accurately measures the oxygen index, providing valuable insights into material flammability and fire resistance.
User-Friendly Operation: Equipped with simple controls and a clear digital display for easy operation and result interpretation.
Durable Construction: Built to withstand rigorous testing, ensuring long-term durability and reliable performance.
Versatile Testing: Suitable for testing a wide range of materials, including plastics, textiles, rubber, and composites.
VLT-ECO Vacuum Leak Tester (ECO Model)
(Air and water tight test box: vacuum test)
Tests on:
Bottles: Glass or PET and Preforms
Caps: Aluminium, other metal, plastic
Cans: Aluminium, others
Pots: caps, film, blisters etc.
Specifications:
? Vacuum adjustable up to - 999 mb
? Box with dimensions upon request
Box made of polished transparent PMMA (very rugged)
Easy to use and safe
Equipped with manometer
Equipped with 3-directions valve for controlling the flow
Accuracy: 0.5% of the measure Equipped with vacuum generator
Runs with 6 bar network
Quick and easy of verification and calibration
Adjustable temporization to keep vacuum or pressure
FDT-0801 Oil and synthetic liquid demulsibility tester
Scope
Standard: ASTM D1401
Oil demulsibility analyzer is based on national standards GB / T7305 requirements "oil and synthetic liquid anti-emulsification assay" under the design and manufacture for the ability of oil and synthetic fluids and water separation determination.
Features
1, the overall structure is compact instrument, rational layout
2, constant temperature bath: Precision control, digital display.
3, constant temperature bath: magnetic stirring, novel structure, the use of infinitely variable, adjustable stirring speed
4, mixing time by the time relay control, when the buzzer alarm automatically.
5, the live cover equipped with three measuring cylinder hole, after its position can be locked by rotation positioning.
6, the column with the vertical positioning ring, easy to operate positioning. Mobile agitator blade up and down, without repositioning
7, using digital temperature controller and time relay, easy to operate
Technical Parameters
1 Power supply: AC 220V ± 10%, 50Hz
2, temperature range: room temperature ~99.9
3, temperature accuracy: ± 1
4, the temperature resolution: 0.1
5, the temperature display format: digital display
6, time control range: 1 second ~ 9 minutes and 59 seconds
7, the time setting mode: control dial to set the time
8, the time display format: digital display
9, stirring speed: 1500 ± 15r / min
10, temperature control heating power: 1000W
FDH-1001 Transformer Oil Oxidation Stability Tester
Scope
The instrument uses advanced contemporary technology, set machinery, optical electronics and computer technology in one, it can be temperature measurement, temperature control. Temperature control accuracy and stability.
The instrument structure is reasonable, stable performance, simple operation, it is the ideal analysis and testing equipment.
Features
1, constant temperature metal bath system:
The use of aluminum as a bath, to avoid oil pollution and oil and gas pollution, but also to avoid accidents.
2, the temperature control system:
Using intelligent temperature controller with microprocessor, with self-tuning, self-diagnosis function, PID three parameters to adjust the temperature, auxiliary heating automatically shut down, so high precision temperature control, stable and reliable performance.
3, with six test baths, both for a sample test can also be up to six samples of the test, convenient and flexible.
4, equipped with six flow meters, can be adjusted and directed into the six oxidation tube gas flow.
5, equipped with digital timer, used to set and record the test time.
Technical Parameters
1, the power supply: AC220V 50Hz, power consumption: â?¤ 1100W.
2, temperature control mode: digital temperature control table automatic temperature control.
3, temperature range: room temperature ~ 160 â??,
4, temperature control accuracy: set temperature ± 0.2 â??.
5, temperature components: thermal resistance.
6, the number of samples: 6 Road, at the same time for six samples.
7, the heating method: metal bath
Advantage:
1.Machine with self-checking function,the turret will automatically checking turret position right or not and calibrated automatically when tun-on machine.
2. Adopted 4.3 inch touch screen, new advanced design for operation interface
3. With HV&HKscale & hardness conversionfunction
4. Digital eyepiece with encoder, D1, D2 data no need manual input to machine, easy operation
5. USB interface, test result can be save to u-flash directly.6. Menu structure interface, all data can display on screen
6. One-time cast aluminum shell, structure more stable.
7.Car painting technology, looking more decent and bright.
8. Reserved optical path for add CCD cameraand connect with PC (optional function)
9. OK/NG judgement function
Application:
1.Widely used to test the hardness of all kinds of metal materials (steel, nonferrous metals, tinsel, cemented carbide, sheet metal, etc.)
2. surface layer / coating (Carburization, nitriding, decarburization layer, surface hardening layer, galvanized coating, etc.)
3. Glass, chip, ceramic, plastic and rubber, etc.
Specifications:
1.Hardness Scaleï¼?HV0.01, HV0.025, HV0.05, HV0.1, HV0.2, HV0.3, HV0.5, HV1
2.Test forceï¼?10, 25, 50, 100, 200, 300, 500, 1000gf
3.Loading:Automatic loading - dwell - unloading test force
4.Turret:Automatic turret
5.Magnification:10X Digital eyepiece; 10X, 40X Objective lens
Total magnification: 100X (observation), 400X (measuring)
6.Indenter:Standard Micro Vickers diamond indenter 136°±0.5°
7.Dwell time:1-99s (unit: 1 second)
8.Data storage:Yes, turn-off machine memory will automatic save
9.Data output:Built-in printer; U-flash (USB interface)
10.Data display:4.3 inch digital touch screen
11.X-Y table:Size: 100x100mm; Max. Move range: 25x25mm
12. Standards:GB/T4340, ASTM E384 & E92, EN-ISO 6507, JIS B-7734
295 Electronic Testers Suppliers
Short on time? Let Electronic Testers sellers contact you.
