Find Verified Electronic Testers Suppliers, Manufacturers and Wholesalers

FAM-001-01 Air Quality Detection Module Description:
FAM-001-01 is combined with sensor TGS2600 which detects indoor air quality, it is high sensitivity to low concentration pollutions, like , cooking, TVOCS.

FAM-001-01 Air Quality Detection Module Features:
* Low power consumption
* Long Lifetime
* High selective to low concentration gas
* High sensitivity to cigarette or cooking and VOCS

FAM-001-01 Air Quality Detection Module Applications:
* Indoor Air Purifier
* Indoor Air Quality Monitor
* Air Condition
* HVAC

FAM-001-01 Air Quality Detection Module Parameters:
Power Supply: 5 +/- 0.2V DC
Power consumption: 250mW
Operating Temperature: -10~55'C
Dimensions: 27.5*23mm
Terminal Type: K2 PH-12AYT(interval 2mm)

Top mounted magnetic float liquidometer
Product name:high temperature and high pressure type magnetic flap level gauge
Product code:15644-178
Update time:2015.08.25
Views:501
Processing custom origin:in kaifeng
Accuracy:+ / - 10 mm
Measuring range:0.3-6 m (standard), up to 15 meters
Temperature range:0-485
Pressure range:vacuum - 42 mpa
The process connection:flange/spool/thread
Protection grade:ip68
Display type:vacuum glass tube packaging, magnetic shows

Feature.Factory-installed fiber stub No epoxy or polishing required Quick and easy fiber termination in the fieldEliminates cable excess length and pigtail splice storage Cost effective Application.Patch panels Distribution frames Maintenance or emergency restoration of fiber networks FTTH OutletsConnection at the desk for LAN environments Applicable for 3.1x2.0mm drop cable or 3.0/2.0/0.9mm cable Optical fiber diameter 125um (657A& 657B) Tight buffer diameter 250um Fiber mode Single mode Operation time About 10s (exclude fiber cut) Insert loss 0.3dB (1310nm & 1550nm) Return loss 45dB Fastening strength of naked fiber 5N Tight clamping force cladding 8N Tensile strength 50N Using temperature -45C~+80

MF5806 Series Digital Oxygen Flow Meters General description

MF5806 series oxygen flow meters are specially designed for hospital individual oxygen therapy applications. it provides precise measurement of instant oxygen intake rate and accumulated oxygen dosage for the individual oxygen delivery system. the design provides low power consumption that make it possible for operation on battery when power is an concern. themeter can be directly connected to the central station via RS485 that can provide remote monitoring and control which will reduce the risk of oxygen over dosing.

MF5806 Series Digital Oxygen Flow Meters Features and Applications
- Plug-and-paly hospital oxygen deliver design for easy usage
- Mass flow technology provide precise instant rate and accumulated dosage
- Historical data storage and retrieval
- Password protected access
- Instant rate and accumulated dosage alarm
- Excellent repeatability and accuracy
- Low power design with stand-alone operation by battery

MF5806 Series Digital Oxygen Flow Meters Specifications
* Flow Range: 0 ~ 10 SLPM
* Accuracy: �±(1.5+0.5 FS)%
* Repeatability: 0.5%
* Respâ??onse Time: 2 sec
* Digital Output: RS485 (Modbus)
* Working Pressure: 0.1 ~ 0.6 MPa
* Working Temperature: -10 ~ +55'C

Gauss Meter
Magnetic Switch
China Gauss Meter
Main Features
Portable, convenient to handle and store, for on site measurement
Automatically shut down time can be set, continuously use for more than 30 hours (turn off back-light)
DC/AC magnetic field
DC/AC maximum value hold
DC field polarity judge function
Probe automatic zero, relative measurement, upper and lower limit alarm sorting
Units: G, T, Oe, A/m
Two 64 readings memory for recording measurement data in real time
USB interface and dedicated acquisition software
Transverse probe/ axial probe with independent calibration value

Supply voltage: 24vdc
Maximum torque: 8nm
Working angle: 75°
Current output: a sustained 10a;a peak 20a (

Power adaptation ability:12vdc/24vdc
Drive adaptation ability: ot960/ot980
Output current: 20a
Rated/idle speed range: 1khz~9khz
Speed adjustment range: 0~1khz
Synchronous control range: 0~1khz
Full-range speed regulation: 0~1.5khz
Continuous operating maximum current: 6a
Output overcurrent protection:6~8a 10min/>8a 3s


For the purpose to start bussiness with your company, we would provide the most competitive price with high quality&technology products.
Products and price list with catalogue details will be provided if needed.
If you have any demand for these product, please contact me.

Supply voltage: 24vdc
Maximum torque: 16nm
Working angle: 75°
Current output: a sustained 10a;a peak 20a (

Working voltage: 12/24vdc
Working current:

]

The monopole antenna, also known as an upright antenna, is an antenna perpendicular to the ground or conductive plane. It has been widely used in long, medium and short wavelengths. Its basic structure is composed of upright oscillator and the ground. StrongFirst monopole antenna mainly includes the 433MHz antenna, LPWA with 868MHz, 915MHz and other frequency antennas and 2G/3G/4G antennas etc.

The active antenna is composed of receiving antenna, LNA circuit and power supply module. Active antenna products include GPS antennas, GLONASS antennas, BD antennas, and Galileo antennas. The function of the product is to receive satellite signals to amplify the signals and then filter out unnecessary noise. Active antenna products have the characteristics of high gain, low noise factor and low power consumption.

Mini electric actuator 12v, mini electric actuator 12v for ball valve and butterfly valve

1). CNC manufactured
2). Custom made
3). Withstand voltage:1500V
4).IP code:IP67



Electric Actuators:

24V DC, 24V AC, 110V AC,220V AC
NEMA 4 and NEMA 7 enclosures
Manual override
Visual indicator

MH-Z19B NDIR Infrared CO2 Sensor Module Applications
MH-Z19B NDIR infrared gas module is widely used in
* HVAC refrigeration
* Indoor air quality monitoring.
* Smart home appliances
* School
* Air cleaner

MH-Z19B NDIR Infrared CO2 Sensor Module Technical parameters
* Main Functions and Features
* High sensitivity, high resolution
* Low power consumption
* Output modes: UART and PWM wave
* Temperament compensation, excellent linear output
* Good stability
* Long lifespan
* Anti-water vapor interference
* No poisoning

MH-Z19B NDIR Infrared CO2 Sensor Module Technical Parameters
* Target Gas: CO2
* Working voltage: 4.5~ 5.5 V DC
* Average current: < 60mA(@5V)
* Peak current: 150mA (@5V)
* Interface level: 3.3 V(Compatible with 5V)
* Preheat time: 3 min
* Response Time: T90 < 120s
* Working temperature: 0 ~ 50 deg C
* Working humidity: 0~ 90% RH (No condensation)

HR202L Humidity Sensitive Resistor Product Overview
HR202L humidity resistance is the use of a new type of organic polymer materials moisture sensitive components, with a sense of wide humidity range, fast response, strong anti-pollution, no heat cleaning and long-term stable and reliable performance, and many other features.

HR202L Humidity Sensitive Resistor Applications
Display for temperature and humidity meter, temperature and humidity gift table, atmospheric environmental monitoring, industrial process control, agriculture, measuring instruments and other applications.

HR202L Humidity Sensitive Resistor Product Highlights
Compact and handsome appearance, good long-term stability, wide temperature and humidity measuring range, high and low temperature and humidity measurement accuracy.

HR202L Humidity Sensitive Resistor Parameters
* Fixed Voltage: 1.5V AC (Max, Sine wave)
* Fixed power: 0.2mW (Max, Sine wave)
* Operating Frequency: 500Hz ~ 2kHz
* Temperature: 0 ~ 60 deg C
* Humidity:

NAP-66A is mainly used for gas detectors and leak testers. NAP-66A is a half in height and needs a half in power consumption compared to existing sensor so that thinner and lighter-weight detectors can be produced. The following are the basic characteristics but it is recommended to refer to the individual users manual for further information.

* Target gases and concentration
Propan(C3H8): 0.03~ 2.2% (0.03~ 1%)
Iso-butane(Iso-C4H10): 0.03~ 1.8% (0.03~ 0.8%)
Hydrogen(H2):0.05~ 4% (0.05~ 1.5%)
Ethanol(C2H5OH): 0.05~ 3.2% (0.05~ 1.5%)
Hydrocarbons(CnH2n+2): 1~100% LEL (1~50%LEL)
( ) is a detection range in high accuracy

* Ratings
Supply Voltage:
DC 2.0 ± 0.2V
AC 2.0 ± 0.2V (r.m.s. 50~60Hz)
Current (When 2.0V is applied):
DC 140 ~ 160mA
AC 140 ~ 160mA (r.m.s. 50~60Hz)
Ambient Temperature:
In operation -10 ~ +50
In storage -10 ~ +50
Ambient humidity:
In operation 95ï¼?RH or less
In storage 99ï¼?RH or less (No dew condensation)

NX1 CiTiceL Nitric Oxide Sensor (NO Sensor) Key Features & Benefits:
* Designed for Automotive Applications
* Fast Response

DHT11 Temperature and Humidity Sensor Module Product Overview
DHT11 digital temperature and humidity sensor is a calibrated digital signal output of the temperature and humidity combined sensor. It uses a dedicated digital modules capture technology and the temperature and humidity sensor technology to ensure that products with high reliability and excellent long-term stability. Sensor includes a resistive element and a sense of wet NTC temperature measurement devices, and with a high-performance 8-bit micro-controller connected.

DHT11 Temperature and Humidity Sensor Module Applications
HVAC, dehumidifiers, testing and inspection equipment, consumer goods, automotive, automation, data loggers, weather stations, home appliances, humidity regulator, medical and other relevant humidity measurement and control.

DHT11 Temperature and Humidity Sensor Module Product Highlights
Low-cost, long-term stability, relative humidity and temperature measurement, excellent quality, fast response, anti-interference ability, long distance signal transmission, the digital signal output, precise calibration.

DHT11 Temperature and Humidity Sensor Module Specifications
* Humidity Range: 5~95%RH
* Humidity Accuracy: ±5%RH
* Humidity Hysteresis: < ±0.3%RH
* Temperature Range: -20~+60 deg C
* Temperature Accuracy (25°C): ±2 deg C
* Temperature Repeatability: ±1 deg C
* Power supply: DC 3.3 ~ 5.5V
* Output signal: Single

AM2315 Digital Temperature and Humidity Sensor Product Overview
AM2315 humidity capacitance is a digital temperature and humidity module contains a digital IIC output has been calibrated temperature and humidity combined sensor. It uses a dedicated digital module acquisition techniques and temperature and humidity sensor technology to ensure that products with high reliability and excellent long-term stability. Sensor includes a capacitive humidity sensing element and a high-precision temperature measurement devices, and with a high-performance 8-bit microcontroller connected. Therefore, the product has excellent quality, fast response, anti-interference ability, high cost and other advantages.

AM2315 Digital Temperature and Humidity Sensor Product Features
â?¢ Fully calibrated
â?¢ Digital signal output
â?¢ Ultra-low power
â?¢ Excellent long-term stability
â?¢ Standard single-wire output

AM2315 Digital Temperature and Humidity Sensor Applications
HVAC, dehumidifiers, testing and inspection equipment, consumer goods, automotive, automation, data loggers, appliances, humidifiers, medical, weather, and other relevant humidity detection control.

AM2315 Digital Temperature and Humidity Sensor Product Highlights
Ultra-low power, transmission distance, fully automated calibration, using capacitive humidity sensor, completely interchangeable, standard digital single-bus output, excellent long-term stability, high precision temperature measurement devices.

AM2315 Digital Temperature and Humidity Sensor Sensor Performance
* Humidity range: 0~99.9%RH
* Temperature range: -40 ~ +80 deg C
* Humidity Accuracy: ±2%RH
* Temperature Accuracy: ±0.3 deg C
* Humidity Repeatability: ±0.1%RH
* Temperature Repeatability: ±0.2 deg C
* Service voltage: 3.3V to 5.5V
* Output signal: IIC

Clean CAP Wireless Ultrasonic Fill-Level Sensor

Do more with less, smarter, greener, and more efficiently than ever.

Reduce your waste collection costs by up to 50% with our smart IoT-based waste bin sensors and monitoring solution. It only requires three steps:
1. Read fill-level information
Clean CAP smart waste bin sensor is compatible with any type of container installation to monitor any type of subtance or waste in real-time.

2. Optimize collection routes
CCN's route optimization and predictive analytics provide insightful historical data to generate the best routes and estimate the time of containers becoming full.

3. Collect the garbage
With CCN, you can plan ahead how collections are implemented, targeting only the locations with full trash bins.

Clean CAP Wireless Ultrasonic Fill-Level Sensor Product features
1. Can be attached to any type of bin, container, or tank
Clean CAP fill-level sensor can be mounted on any type of bin, container, or tank. If the container is made of plastic, the device can be mounted by screwing. For steel containers, Clean CAP can be fixed to the container's lid using brackets.

2. Senses both solid and liquid materials
Clean CAP's ultrasonic sensor enables it to detect both solids (general waste, paper, glass, e-waste, textile, etc.) and liquids (oil, sludge, agriculture products, etc.). The range of distance can vary between 30 cm - 400 cm (4 m / 13 ft).

3. Communicates wirelessly with monitoring platform
Clean CAP sends real-time information to Clean City Networks monitoring and data-analytics platform through wireless data transmission using 2G/3G networks. The software enables our customers to optimize their waste collection operations through data-driven decision making.

4. Designed for extreme environments and durability
Clean CAP has been tested to push the limits of its operability in conjuction with its battery life. It is completely enclosed and protected against dust and water, has a battery life of up to 10 years, and can operate in temperatures from -30 deg C (-22 deg F) to 80 deg C (176 deg F).

Clean CAP Plus Wireless Ultrasonic Fill-Level Sensor Basic specifications
* Power: 3.6V high performance lithium battery
* Size (H x W x L): 95mm x 96mm (3.74in. x 3.8in.)
* Net weight: 470g (1.04 lbs.)
* Battery life: Up to 10 years