Features
* oxygen pressure range 2 mbar - 3bar
* zirconium dioxide (zro2 ) sensing elements
* non-consumption technology
* integral heating element
* no need for temperature stabilisation
* no reference gas required
* high accuracy
* linear output signal
* operates with external interface boards
* pcb mountable
Specifications
Heater supply*
Porous lid cap 4vdc +/- 0.1vdc (1.7a)
Stand by 1.65vdc (0.7a)
Full porous cap 4.35v dc +/- 0.1v dc (1.85a)
Stand by 2v dc (0.85a)
oxygen pressure range 2 mbar - 3bar
zirconium dioxide (zro2 ) sensing elements
non-consumption technology
integral heating element
no need for temperature stabilisation
no reference gas required
high accuracy
linear output signal
operates with external interface boards
Specifications
Heater supply*
Full porous cap 4.35v dc +/- 0.1v dc (1.85a)
Stand by 2 v dc (0.85a)
Features
* oxygen pressure range 2 mbar - 3bar
* zirconium dioxide (zro2 ) sensing elements
* non-consumption technology
* integral heating element
* no need for temperature stabilisation
* no reference gas required
* high accuracy
* linear output signal
* operates with external interface boards
* 80mm, 220mm and 400mm probes available
Specifications
Heater supply*
Porous lid cap 4v dc +/- 0.1v dc (1.7a)
Stand by 1.65v dc (0.7a)
Full porous cap 4.35v dc +/- 0.1v dc (1.85a)
Stand by 2v dc (0.85a)
Properties of the TOCON_ABC1
Broadband SiC based UV photodetector in TO5 housing with concentrator lens cap
0 to 5 V voltage output
peak wavelength at 280 nm
max. radiation (saturation limit) at peak is 18 nW/cm2, minimum radiation (resolution limit) is 1.8 pW/cm2
Applications: very low UV radiation, flame detection
Digital Temperature Humidity Sensor HTU21D In Stock
1. digital temperature and humidity sensor
2. range:1-100%RH
3. original, high quality, competitive price
DESCRIPTION
HTU21D, the new humidity and temperature sensor of MEAS is about to set new standards in terms of size and intelligence: Embedded in a reflow solderable Dual Flat No leads (DFN) package of 3 x 3mm foot print and 1mm height it provides calibrated, linearized signals in digital, I²C format.
HTU21D sensors are dedicated humidity and temperature plug and play transducers for OEM applications where reliable and accurate measurements are needed. Direct interface with a micro-controller is made possible with the module humidity and temperature digital outputs. HTU21D sensors are low power consumption designed for high volume and cost sensitive applications with tight space constraints.
Every sensor is individually calibrated and tested. Lot identification is printed on the sensor and an electronic identification code is stored on the chip – which can be read out by command.
1192 Electronic Sensors Suppliers
Short on time? Let Electronic Sensors sellers contact you.
Description
Based on a unique capacitive cell, these relative humidity sensors are designed for high volume, cost sensitive
Applications such as office automation, automotive cabin air control, home appliances, and industrial
Process control systems. They are also useful in all applications where humidity compensation is needed.
Features applications
• fulll interchangeability with no calibration
Required in standard conditions
• automotive
• instantaneous desaturation after long periods in
Saturation phase
• home appliance
• compatible with automatized assembly
Processes, including pb free wave soldering
And reflow processes (1)
• printers
• meteorology
• individual marking for compliance to stringent
Traceability requirements
• part may be washed with distilled water
Indoor Air Quality Sensor IAQ Gas sensor 100ppm
- Zero Power Sensor
o Sensor Circuit - < 10 uW max
- Cold operation - No Heating required
-Rugged Design- Not poisoned by
sulfides, chlorides, NH3
- Stable Response– Not affected by
humidity, CO2, N2, Ar, most saturated
hydrocarbons, hexane
- Small Size& Low Profile - 20x20x3 mm
• Sensitive - In the ppm range
• Easy to Use - Linear Response
• Long Life - 10 years expected life
• Fast Response - < 20 seconds
• ROHS Compliant
Applications:
• Bad Air Quality Detection
• Indoor Air Monitor
• Air Purifier Controls
• Weather Stations
• Internet of Things
• Smart Homes
• Early Fire Detection
• Leak Detection
• HVAC Ventilation Control
optical oxygen sensor O2 Gas sensor LOX-02
Description
The LuminOx Family is a range of factory calibrated optical sensors which measure ambient O2levels using the principle of fluorescence quenching by oxygen.
Our unique patented process allows us to produce an oxygen sensor that benefits from low power, traditionally associated with electrochemical sensing devices, while providing a much longer lifetime due to the non-depleting sensing principle.
Applications
Typical applications for the Cheap Price Oxygen Sensor LOX-02 are;
Oxygen detection
Portable equipment
Breathing apparatus
Inerting
Medical
Lab equipment
Agriculture
Incubation
Fore prevention
Flue gas in condensing boilers
Cheap price Ozone sensor O3 Gas sensor 20ppm
SPEC’s printed sensors offer the performance of the best quality electrochemical sensors at a fraction of the price. SPEC’s printed sensors are also ultra-thin, offering easy integration into wireless, portable, and networked solutions. These sensors are ideal for health, environmental, industrial and residential monitoring, because of their high performance, low cost and small size.
BENEFITS
• Small Size with Low Profile (20x20x3 mm)
• Long Life (10 years expected life)
• Fast Response (< 15 seconds)
• Low Power Consumption
• Individually Calibrated (NIST Traceable)
• ROHS Compliant
APPLICATIONS
• Air Quality Monitoring
• Industrial Safety
• Air Purification Control
OEM Optical Water Sensor Water Level Sensor
Whilst maintaining our very competitive pricing, the Optomax Industrial range of liquid level sensors offer higher supply voltage ranges, higher current drive options and an extended temperature range for more challenging specifications and environments.
SST has improved this range of industrial level sensors and introduced new features such as;
Low power consumption, reducing supply current from 15mA to 2mA
Increased output power, increasing output sink and source current from 500mA to 1A
They are solid state, no moving parts unlike mechanical switches where debris can get jammed and cause unreliability.
Very accurate and precise readings
Easy to install, saving assembly time
Very robust which permit use in a wide range of fluids and chemicals
Housings, cabling and connectors are made to your requirements
High pressure options available
Misir is a low power (20mw4), high performance co2 sensor. Based on gss patented solid state ir sensor technology and innovative optical designs, misir is configured to meet the requirements of the hvac and demand led ventilation markets.
Low power 20mw
Measurement ranges from 0 to 1%
Low noise measurement
SICK connects - complete connectivity from a single source. SICK provides connection devices that easily connect to other devices in your machine, regardless of the selected automatic identification technology. These devices enable easy integration of field bus gateways into the modular connection boxes, making it possible to incorporate the scanner, camera or RFID systems into different field bus technologies. A field bus proxy, external parameter memory, display, and power modules provide a high degree of application flexibility.
At A Glance:
Connection module for one ID pro sensor
Clearly visible, easily accessible screw- and spring-loaded terminals
Connection diagram on the inside of the lid
Configuration with switches
IP 65 connection for one ID pro sensor using standard connection cable
Basis for CMC600 parameter cloning module
Service plug for direct access to the AUX interface
Your benefits:
Compact design fits into small spaces
Two mounting holes for fast, precise installation saves on installation costs
Clearly labeled, easily accessible screw- and spring-loaded terminals save time when connecting to peripherals
Quick, easy configuration with switches reduces installation time
Industrial-standard connection guarantees a reliable application solution
CMC600 parameter cloning module allows rapid exchange and replacement of connected sensors
Product Family:
In this type of sensors CDM, CDF, CDB series are available.
Protection Class
Protection class can be up to IP69K.
Product Description:
The Arduino/Genuino Uno can be programmed with the (Arduino Software (IDE)). Select "Arduino/Genuino Uno from the Tools > Board menu (according to the microcontroller on your board). For details, see the reference and tutorials.The ATmega328 on the Arduino/Genuino Uno comes preprogrammed with a bootloader that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol (reference, C header files). You can also bypass the bootloader and program the microcontroller through the ICSP (In-Circuit Serial Programming) header using Arduino ISP or similar; see these instructions for details.
Speed(MHz) 16MHZ
Core Size (Number of Bits) 8 Bit
RAM Size 2KBYTE
ROM Type EEPROM Flash
Number of Pins 28
Other Detail:
Microcontroller ATmega328P
Input Voltage (recommended) 7-12V
Input Voltage (limit) 6-20V
Digital I/O Pins 14 (of which 6 provide PWM output)
PWM Digital I/O Pins 6
Analog Input Pins 6
DC Current per I/O Pin 20 mA
DC Current for 3.3V Pin 50 mA
Flash Memory 32 KB (ATmega328P)
of which 0.5 KB used by bootloader
SRAM 2 KB (ATmega328P)
EEPROM 1 KB (ATmega328P)
Clock Speed 16 MHz
LED_BUILTIN 13
Gas Distribution Monitoring Systems : Unlike many competitors who sell boxes, PMAS delivers total secure end-to-end connectivity solution that seamlessly integrates remote devices & sites to centralized management systems i.e. SCADA. No changes in the existing system are needed. Gas Monitoring Systems is operator-independent and allows customer to implement two way communication in a similar manner all around the world.
Features:
Reliable
Industry Leading Prices
Easy Maintenance
Product Description:
The Arduino/Genuino Uno can be programmed with the (Arduino Software (IDE)). Select "Arduino/Genuino Uno from the Tools > Board menu (according to the microcontroller on your board). For details, see the reference and tutorials.The ATmega328 on the Arduino/Genuino Uno comes preprogrammed with a bootloader that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol (reference, C header files). You can also bypass the bootloader and program the microcontroller through the ICSP (In-Circuit Serial Programming) header using Arduino ISP or similar; see these instructions for details.
Speed(MHz) 16MHZ
Core Size (Number of Bits) 8 Bit
RAM Size 2KBYTE
ROM Type EEPROM Flash
Number of Pins 28
Other Detail:
Microcontroller ATmega328P
Input Voltage (recommended) 7-12V
Input Voltage (limit) 6-20V
Digital I/O Pins 14 (of which 6 provide PWM output)
PWM Digital I/O Pins 6
Analog Input Pins 6
DC Current per I/O Pin 20 mA
DC Current for 3.3V Pin 50 mA
Flash Memory 32 KB (ATmega328P)
of which 0.5 KB used by bootloader
SRAM 2 KB (ATmega328P)
EEPROM 1 KB (ATmega328P)
Clock Speed 16 MHz
LED_BUILTIN 13
Siemens x 88mm feeder with splicing sensor
We have a many siemens feeder in our stock.
If you need pls contactï¼?jack@goldlandsmt.Com
Related products:
Siemens/asm siplace x 4mm feeder 00141268
Siemens/asm siplace x 8mm feeder 00141270 00141290 00141370 00141390
Siemens/asm siplace x 2x8mm feeder 00141269 00141289
Description
E1000 is a portable rechargeable single gas detector. It can detect the concentration of combustible gases, oxygen and toxic gases in the surrounding environment, and send out information when an abnormality occurs. Itâ??s easy for replacement and maintenance by the user himself with adopting smart sensor module.
It is applicable to explosion-proof places: steelworks, petrochemical plant, oil industry, shipbuilding yard, sewage treatment plant, mine, power supply works etc.
Key Features
Real-time clock
Smart interchangeable sensor module
Calibration point adjustable
Two alarm level
STEL alarm and TWA alarm for toxic gases
Visual, audible, vibrating alarm
Self protection against high concentration combustible gas
Low battery alert
Data uploading
Password management
Self-test when power on
Self-diagnostic and self-correction function
GPS, GPRS and Man-down function optional
For Ingersoll Rand Air Compressor Temperature Sensor 85652536.Temperature sensor ld and car air conditioners, refrigerators, freezers, water heaters, drinking water dispenser, air warmers, dishwashers, disinfecting cabinets, washing maachines, driers, medium-low-temperature drier cabinet, thermo tanks, and so on. Convenient for pacing as per the practical condition. The traditionally-structured sensor could be made into high dissipation product, which test current could be far larger and circuitry be simplified.
1192 Electronic Sensors Suppliers
Short on time? Let Electronic Sensors sellers contact you.
