Microprocessed instrument to make conductivity measurements with a friendly software. Auto temperature compensation. Follow a 500 ml of conductivity standard to calibrate the instrument, the conductivity platinum cell index 1.0 and the temperature sensor.
A box with 450 mm x 400 mm x 350 mm dimension. Protected with a poliuretane foam device inside the box. Total weight 10.0 pounds.
* Receives messages from CNC control system
* Optional function buttons according to user' requirements
* Displays data transferred by PLC digital I/O (serial out simulation) or serial I/O (RS232C)
* Patent magnetic back cover
* Optional enabling micro switches for application
* Emergency stop button for option
* F type offers 6 key buttons for application extension
* Multiple output types suit for various CNC control system
* Provides reverse polarity protection
* Low-cost total solution with three types of multiple option and combination
Specification
60 groups memory function.
Average function for last 3 times measurement value.
Fuzzy Logic technology.
Arrhythmia detection function (IHB).
Automatically inflate and deflate.
Automatic power-off function.
Power: 4 AA size alkaline batteries.
Measurement Range: Pressure: 0mmHg~299mmHg; Pulse: 40~200 times/min.
Measurement Accuracy: Pressure: +/- 3mmHg; Pulse: +/- 5% of reading.
Parameters setting: selectable parameters of length, width, thickness, test speed, time and so on.
Printing: report of a4 paper.
Searching: search the historical results.
Clear: clear the test results.
Calibrate: calibrate the force testing system.
Communicate: test reports, store, searching, and data output
PHT-2910 Mini pH - Temp Tester
Range: 0.00í¬14.00 pH , 0-90íµ (32-194 ¿H)
Resolution: 0.01 pH, 0.1íµ / 0.2¿H
Accuracy: ¿Qí+0.03 pH, 1 / í+ 2¿H
Automatic Temperature Compensation(ATC): 5í¬45íµ( 41-113ípF )
Calibration: Two-point at 6.86pH and 4.01pH (or 7.0pH and 4.01pH )
Low batteryú¦As long as there is any display, the accuracy is guaranteed. With Temperature Display.
Battery Life: DC 4 x 1.5V .
Single Phase DIN-Rail Energy Meter (DDS-1Y-L)
Executive Standard: IEC62052-11 2003; IEC62053-21 2003 and IEC62056-21(IEC1107)
DIN-rail standard: "SO"43864.
Function and characteristic:
Single measurement(optional RS485 or RS485 Modbus)
High accuracy of measure, convenient installation;
Logical design of Anti-creep.
Technical data:
Rated voltage: 110V, 120V, 220V, 230V
Rated Current: 1.5(6)A, 5(60)A, 10(100)A
Frequency: 50-60Hz
Connection mode: CT type; Direct type
Display mode: LCD 5+2 = 99999.99kWh
Accuracy Class: 1.0
Power consumption: 1W (when 220V 20A)
Start current: 0.004Ib
Constant: 12800 imp/kWh; 800/1600/3200/6400 imp/kWh
Standard work temperature: -20-45 degree
Climate work temperature: -30-55 degree
Relative humidity: 85%.
Function random phase measurement, AC current and leak current measurement, AC Voltage detection, distinguish the inductive circuit and capacitive circuit, sequence of three-phase voltage detection and connection group of transformer detection, etc.
Power supply DC9V alkaline dry battery LR6f-6 continuous duty :300h
LCD 3-1/2 LCD display
Dimension Width *length* thick·ª92mmf-192mmf-50mm
LCD dimension Display domain·ª64mmf-54mm ·+font high·ª40mm
Clamp mouth ¬+7.5mm ·+¬+40mm lectotype·¼
Measuring range phase·ª0~360fp·+current·ª0~200mA/2A/10A·+voltage·ª0~20V/200V/500V
resolution phase·ª1fp·+current·ª0.1mA·+voltage·ª0.01V
Measurement accuracy
·+50Hz,23f¦f+1f¦·+40-60%RH·¼ phase·ªf+3fp
current·ªf+1%f+2dgt
Voltage·ªf+1.2%f+2dgt
line voltage Line test under AC500V
Sampling speed About 3 times /s
Signal frequency sine wave 45Hz~55Hz ¬-=0.05
Data hold Data holding function·ªdisplayed by fªDHfª symbol
Back light function Blue back light ,suit for dark occasion
Automatic shutdown After starting up 15min·+it shutdown automatically to reduce battery consumption
Battery voltage When battery voltage is low ,battery low voltage symbol will filker to remind replacing battery;
Quality Core about590g·+with battery·¼·+long flat nose current pliers about ·ª175gf-2·+big round tongs clamp·ª120g
Work temperature and moisture -10f¦~40f¦·+85%rh below
Storage temperature and moisture -20f¦~60f¦·+70%rh below
Driving point impedance AC voltage driving point impedance·ª2M¬+·+when test phase U1-U2·ª40K¬+
Insulation intension fª10M¬+9·+Between wire of meter and crust·+two voltage input port·¼
Voltage bear Between port of voltage input and box, split core type currenttransformator and clamp handle& winding coil: 1000V/50Hz, 1min experiment can be reach when sine wave AC voltage 500V/50Hz between port of voltage input.
Aliava avf250 series is a common used various flow meter in auto-industry process control. It's with small volume, wide range and easily operation.
It could also measure liquid, gas and steam flow rate, especially fit for small flow rate application.
Features
4 digit flow rate & 8 digit totalizer
Local indication without auxiliary power
4-20 ma & scale pulse output
Low pressure lost on gas and steam application
Damper for gas/steam application
Consistent overall length
Heating jacket design
Intrinsically safe & explosion proof for hazardous area
Aliavtx avf7000 is a vortex flowmeters based on von karman theory of vortices generated by a bluff body in the pipe. The number of vortices are linearly proportional to the volumetric flow in the pipe.
The avf7000 is versatile flowmeter widely used for gases, steam & liquid applications. There are no moving parts and comes with either
Flange or wafer connection. Standard configuration comes with local indication for flowrate and total flow as well as a 4-20ma output function output. The electronics are designed to filter out erroneous signals as well as noise due pipe vibration.
Features
Simplified setup and diagnostic functions.
Auto. Temperature & pressure compensation
4-20 ma and pulse outputs, user selectable.
A very wide selection of sizes.
Wide temperature range of up to 420 deg. C.
Non-volatile memory for setup and calibration.
Specification
Size:10, 15, 20, 25, 32, 40, 50, 65, 80, 100, 125, 150, 200, 250, 300, 350, 400, 450, 500mm
Material:
Stainless steel 301 / 304 / 316
Accuracy:
Liquid:+/- 0.7% of reading
Gas & steam:+/- 1.0% of reading
Process connection:
Flange / wafer
Flanges type:
Jis 10k / jis 20k / jis 40k
Ansi 150# / ansi 300# / ansi 600#
Din pin 10 / pn 16 / pn25 / pn 40
Temperature:
-40 ~ +280 deg. C (standard)
-40 ~ +420 deg. C (optional)
Protection:
Ip 65
Explosion proof, exd iic t6
Intrinsically safe, e ex ia iic t4
Local display:
4 lines lcd
4 digit flowrate
8 digit totalizer
Communication:
Rs485
SFY-60C
Product attributes
1.Small in size and light in weight
2.Rapid and accurate in detection
3.Easy to operate
4.Red numeral tube used in the displaying instrument
5.Widely used
6.Available to computer and printer connection
Our Products
SFY infrared moisture meter is a new,rapid moisture detecting instrument based on thermal gravimetric theory While sample products are weighed by infrared moisture meter,the meter is Infrared Heating Unit and Water Evaporating Channel dry the
sample products rapidly.During the process,moisture meter continuously measure and display the moisture content lost by the samples.The final numerical value is fixed and showed after the dry process is over.Compared with the traditional oven heating approach,nfrared heating has the advantage of achieving the maximum heating power within the minimum time span.Samples are dried under high temperature,which quickens the detecting time generally,a sample is moisture value is detected within several minutes.It is accurate in detection and easy to operate.Its displaying part is a red numeral tube with clear displaying results.The moisture meter can respectively display enumerated date of moisture,sample is initial and terminal data,detecting time span and temperature is initial and terminal data.Furthermore,the equipment is easily available for connection with computer and printer.Hence,SFY infrared moisture meter can be applied widely in most products which requires rapid moisture detection,ncluding medicine,cereals,seeds,tobacco,chemical,tea,food,meat textile and etc as well as in laboratory and manufacturing process in fields like agriculture and forestry,paper making.plastic or rubber making,textile and etc.
SFY-20
SFY-20
Product attributes
1.Small in size and light in weight
2.Rapid and accurate in detection
3.Easy to operate
4.Red numeral tube used in the displaying instrument
5.Widely used
6.Available to computer and printer connection
Our Products
SFY infrared moisture meter is a new,rapid moisture detecting instrument based on thermal gravimetric theory While sample products are weighed by infrared moisture meter,the meter is Infrared Heating Unit and Water Evaporating Channel dry the
sample products rapidly.During the process,moisture meter continuously measure and display the moisture content lost by the samples.The final numerical value is fixed and showed after the dry process is over.Compared with the traditional oven heating approach,nfrared heating has the advantage of achieving the maximum heating power within the minimum time span.Samples are dried under high temperature,which quickens the detecting time generally,a sample is moisture value is detected within several minutes.It is accurate in detection and easy to operate.Its displaying part is a red numeral tube with clear displaying results.The moisture meter can respectively display enumerated date of moisture,sample is initial and terminal data,detecting time span and temperature is initial and terminal data.Furthermore,the equipment is easily available for connection with computer and printer.Hence,SFY infrared moisture meter can be applied widely in most products which requires rapid moisture detection,ncluding medicine,cereals,seeds,tobacco,chemical,tea,food,meat textile and etc as well as in laboratory and manufacturing process in fields like agriculture and forestry,paper making.plastic or rubber making,textile and etc.
The adp9000 offer of configurations for differential, gas, absolute vacuum liquid-level measurements including integrated solutions for pressure, level and flow.
Features
Updating time of output current in 200 ms
Improved performance, increased accuracy, greater stability
Two years stability of 0.2%
0.075% accuracy
Parameter setting by local keypad or rs485 communication port
4-20 ma output plus direct digital hart communication
Automatic zero calibration by push button
Explosion proof and weather proof housing
Specification
Process fluid: liquid, gas of vapor
Application: differential pressure, gauge pressure, absolute pressu
Measuring range:0 - 0.25 kpa ~ 0 - 1.5 kpa ( minimum )
0 - 4.0 mpa ~ 0 - 25.0 kpa ( maximum )
Accuracy:+/- 0.75% of span
Material:
Flange/adapters: stainless steel 304 / stainless steel 316
Drains/vents: stainless steel 304 / stainless steel 316
Diaphragms: stainless steel 316l / hastelloy b /hastelloy c / monel / tantalum
Wetted o-rings: Buna n / viton / ptfe
Bolts & nuts: carbon steel / stainless steel 316
Mounting bracket: carbon steel / stainless steel 304 / 316
Name / tag plate: stainless steel 304 / stainless steel 316
Converter housing: low copper cast aluminum alloy with polyurethane, light blue paint
Enclosure:ip67 ( standard )/intrinsically safe eex ia iic t5 ( standard )/ex
Standard
838 Electronic Meters Suppliers
Short on time? Let Electronic Meters sellers contact you.
