Find Verified Electronic Meters Suppliers, Manufacturers and Wholesalers

When smeared on your skin Holzhacker intensive insect lotion protects you from itching and dangerous insect stings and at the same time cares for your skin. The intensive protection insect lotion in the practice pump spray well tried all over the world and is ideal for travelling, leisure time or sport.

Holzhacker wound ointment is a vitamin rich ointment and contains natural substances. This ointment with its combination of reliable and usefully blended ingredients such as Cod liver oil, Zinc oxide and Hamamelis, protects skin from daily wear and tear. It encourages skin irritations to abate and protects especially sensitive skin.

100% Brazilian Arabica Organic (Biodynamic) Gourmet Coffee.

The choice of an organic method, that has the endorsement of IBD (The Biodynamic Institute) gives this gourmet coffee a special flavor.
A flavor of purity: the fruit of a soll that receives no chemicals. Its harvesting is also a guarantee of what is the utmost in a coffee: it takes from the tree the ripe and red grains only, the "cherries", that are afterwards sundried and, once more, (electronically selected to arrive at a defect-free product).
These cares, added to a balanced blend of grains from the best Brazilian lands, makes of Cia. Organica a rare coffee and a delight for the taste buds.
The IBD is a certifier organization, internationally recognized acrredited by IFOAM (International Federation of Agriculture Movements) and DAR (Deutscher Akkreditierungs Rat).
Certificates: IBD - IFOAM - USDA Organic - RAT - JAS

CAF+ DO BRASIL " Ready to heal" your heart!

Feel free to contact us at any time!

About Meltblown Nonwove
Melt blown is a one step process to make fabrics from polymer.
The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided.
The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding.
The main purpose of melt blown fabric is to provide barrier property for the liquid.
Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form.
Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric.
Characteristics of Meltblown fabrics are:
The main desired characteristics expected for melt blown nonwoven fabrics are:
Adjustable Pores And Capillary Structure
Excellent barrier properties
Filament size 1 -3 �µm
High Elasticity
High Filtration capability
Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD).
Large Area-to-weight ratio
Self-bonding
The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2.
Very good thermal insulation for apparel application
Weak tensile properties
Wicking Properties

Application of spun-bond nonwoven fabrics:
Sanitary and Hygiene:
Sanitary napkins,
Baby diapers and
Incontinence diapers
Medical and Surgical:
Gowns,
Face masks,
Caps,
Drapes, etc
Other Miscellaneous Applications:
Filtration Material,
Agriculture,
Oilsorbents
Hot-melt adhesives
Headliners, etc

About Meltblown Nonwoven

Melt blown is a one step process to make fabrics from polymer.
The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided.
The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding.
The main purpose of melt blown fabric is to provide barrier property for the liquid.
Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form.
Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric.
Characteristics of Meltblown fabrics are:

The main desired characteristics expected for melt blown nonwoven fabrics are:

Adjustable Pores And Capillary Structure
Excellent barrier properties
Filament size 1 -3 �?�µm
High Elasticity
High Filtration capability
Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD).
Large Area-to-weight ratio
Self-bonding
The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2.
Very good thermal insulation for apparel application
Weak tensile properties
Wicking Properties


Application of spun-bond nonwoven fabrics:

Sanitary and Hygiene:
Sanitary napkins,
Baby diapers and
Incontinence diapers
Medical and Surgical:
Gowns,
Face masks,
Caps,
Drapes, etc
Other Miscellaneous Applications:
Filtration Material,
Agriculture,
Oilsorbents
Hot-melt adhesives
Headliners, etc

About Meltblown Nonwoven

Melt blown is a one step process to make fabrics from polymer.
The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided.
The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding.
The main purpose of melt blown fabric is to provide barrier property for the liquid.
Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form.
Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric.
Characteristics of Meltblown fabrics are:

The main desired characteristics expected for melt blown nonwoven fabrics are:

Adjustable Pores And Capillary Structure
Excellent barrier properties
Filament size 1 -3 �?�µm
High Elasticity
High Filtration capability
Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD).
Large Area-to-weight ratio
Self-bonding
The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2.
Very good thermal insulation for apparel application
Weak tensile properties
Wicking Properties


Application of spun-bond nonwoven fabrics:

Sanitary and Hygiene:
Sanitary napkins,
Baby diapers and
Incontinence diapers
Medical and Surgical:
Gowns,
Face masks,
Caps,
Drapes, etc
Other Miscellaneous Applications:
Filtration Material,
Agriculture,
Oilsorbents
Hot-melt adhesives
Headliners, etc

About Meltblown Nonwoven
â?¢ Melt blown is a one step process to make fabrics from polymer.
â?¢ The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided.
â?¢ The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding.
â?¢ The main purpose of melt blown fabric is to provide barrier property for the liquid.
â?¢ Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form.
â?¢ Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric.
Characteristics of Meltblown fabrics are:
The main desired characteristics expected for melt blown nonwoven fabrics are:
â?¢ Adjustable Pores And Capillary Structure
â?¢ Excellent barrier properties
â?¢ Filament size 1 -3 �µm
â?¢ High Elasticity
â?¢ High Filtration capability
â?¢ Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD).
â?¢ Large Area-to-weight ratio
â?¢ Self-bonding
â?¢ The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2.
â?¢ Very good thermal insulation for apparel application
â?¢ Weak tensile properties
â?¢ Wicking Properties

Application of spun-bond nonwoven fabrics:
â?¢ Sanitary and Hygiene:
â?¢ Sanitary napkins,
â?¢ Baby diapers and
â?¢ Incontinence diapers
â?¢ Medical and Surgical:
â?¢ Gowns,
â?¢ Face masks,
â?¢ Caps,
â?¢ Drapes, etc
â?¢ Other Miscellaneous Applications:
â?¢ Filtration Material,
â?¢ Agriculture,
â?¢ Oilsorbents
â?¢ Hot-melt adhesives
â?¢ Headliners, etc

This DC to AC inverter is designed for the backlight of 6.4-15.1" LCD Panel with single CCFL lamp
Input voltage: 12VDC
Kick-off Voltage: min1500
Lamp Voltage: 500V
Output Connector Mode: SM02B/ SM02 (8.0)*2
Transformer Qty: 2
Output Current: 6mA
Output Voltage: 500V
Frequency: 40 KHz
Dimmer: Yes
Dimension : 95.5mm*20mm*4.7mm.

Features
* Pressure ranges from 10 mbar to 5 bar absolute, differential or gage
* Barometric pressure ranges
* Output: I²C bus and 0.5...4.5 V
* Precision ASIC conditioning
* Calibrated and temperature compensated
* Miniature SMT and DIP housings
* Sensortechnics PRO services

Applications
* Medical equipment
* Environmental controls
* HVAC

General description

First Sensor HDI sensors offer precision pressure measurement from 10 mbar up to 5 bar. The HDI series performs precision digital signal conditioning to achieve ultra high total accuracies. An internal ASIC compensates sensor offset, temperature effects and non-linearity to allow for an excellent Total Error Band (TEB) better than ±0.5 %FSS. The pressure sensors provide digital interfaces with I²C bus protocol as well as analog output signals. Optional 3 V supply voltage versions and special low power devices make the HDI series ideal for battery powered applications, e.g. in portable or handheld devices. Miniature SMT housings allow for space-saving PCB-mounting and maximum OEM design flexibility.


Size without nipples and pins (approx.) 12 x 15 x 7 mm

The LDE differential low pressure sensors are based on thermal flow measurement of gas through a micro-flow channel integrated within the sensor chip. The innovative LDE technology features superior sensitivity especially for ultra low pressures. The extremely low gas flow through the sensor ensures high immunity to dust contamination, humidity and long tubing compared to other flow-based pressure sensors. Miniature SMT and DIP housings allow for space-saving PCB-mounting.

Typical applications include medical devices, HVAC and instrumentation.


on request

Beech Firewood/Wood logs Cleaved

We are trading with hard firewood on pallets. It can be either fresh or dry up to 20%. Available species: Ash, Beech, Birch, Oak.
Best quality kiln-dried Alder firewood packed in 2m3 crates.
Kiln-dried firewood
Our company is the manufacturer of firewood and other bio-energy products like wood pellets, briquettes, wood charcoal.
Kiln Dried Firewood for Sale, Oak, and Beech Firewood Logs
- Hornbeam Firewood
- For Firewood
- Ash Firewood
- Alder Firewood
- Oak Firewood
- Birch Firewood
- Spruce Firewood
- Beech Firewood
- Dried Kiln Firewood
- Dried Robber wood
- Dried Eucalyptus wood.
Measures outside: 1.2 m * 0.8 m * 2.0 m.
Split length: 25-100 cm
width of the split: 8-16cm
Wood fire size: 25cm, 33 cm or 50 cm;
The thickness of wood is 5-15 cm.
Fire wood diameter 7 - 19 cm;
Moisture Content: < 20%
Ash Content (db): < 0.5%
Abrasion: 2.0%
Calorific Value: > 4500kcal/kg
Diameter: 5cm to 15cm
Length: 20cm to 50mm
Burn Value: 90-95%
Humidity: 12%;
1 pallet=1 Ton
28 pallet= 1 Truck
Our prices are very cheap as compared to other suppliers and our wood will be the best for the winter period. We have the capacity to supply large quantity orders and we will be looking forward to establishing a long-term business relationship with any Interested company.
punctuality as to the delivery of our product has made us one of the top-ranking competitors in the world.
We are looking for new business partners. We are ready to offer fresh cut mix, ash, and oak firewood on 1m3,2m3 pallets and netted bags. Also, mix dry kiln firewood. For March we had 4 loads available. We are ready to offer also kindlings.
PM me for details if interested.

Ceramic CPU scrap for gold recovery 2.20 GHz 1155 1150 1151 i5
processor CPU i5 i7
Product details
type USD
DMI 2.5GT/s
Stepping C2, K0
TDP 73W-87W
GPU 733MHZ

We sell & export copper millberry scrap 99.99%.
Material : Quality Copper wire
Wire diameter: 0.30mm, 0.25mm, 0.20mm
Weight/spool: 3 kg, 5 kg, 7 kg, 15 kg, 20kg
Tensile strength: 1000 N/mm2, 900 N/mm2, 500 N/mm2, 450 N/mm2, N/mm2
Packing: shrink wrapped+carton+pallet to resist moisture, quake, and corrosion.

Usage:


Name

Copper wire scrap (Millberry) 99.78%/99.99%

Item

Standard (%)

Results(%)

Purity (%)

â?¥99.78

99.9

Carbon

0.03

0.03

Cobalt