It can use with lamps, incandescent lamps (bulbs), old-fashioned fluorescent lamps, electronic fluorescent ring lamps, spotlights, transformers, small electrical appliances, and other all other appliance
Good solution for energy saving and easy in installation. and Delay adjustment: 10 Seconds - 7 Minutes and Adjustable Lux: turn on the lights during the day or night
Using the automatic control product of infrared technology,when people walk into the sensor range,and the sensor can detect the spectral change of the human body infrared ray,during this time,the switch will connect the load automatically until the person leaves the sensor range. 2, Through the photosensitive control , it will not turn on the lights in the daytime or light environment, but also can be adjusted in any lighting environment sensing lights
Sensitivity Adjustable: Turn on Lights during Day or nights
Light turns on in the dark and turn off on daytime, intelligent sensor, no need to operate by manual
Fully Automatic Switching On And Off Operation.
Automatic Sensor Light Control Switch/ It can use Street Light, Garden Lights, Incandescent lamps, LED lights. If you have any queries feel free to contact us. Quick Sense Innovations Official site. packing is tested before dispatched so that the item reaches the buyer safely and undamaged.
Working: As shown in the above diagram out of three wire's Red: Load, Blue: Neutral & Brown: Phase. Connect Red & Blue to Load Application were using (i.e. Lighting) & Brown and Blue to 230 VAC input supply. Now it is ready to operate Day/Night mode. For testing keep the torch over to the Photocell load will turn ON.
Automatic Sensor Light Control Switch/ It can use Street Light, Garden Lights, Incandescent lamps, LED lights. If you have any queries feel free to contact us. Quick sense innovations. Packing is tested before dispatched so that the item reaches the buyer safely and undamaged.
Turn on the lights during the day or night
Automatic Sensor Light Control Switch/ It can use Street Light, Garden Lights, Incandescent lamps, LED lights
Sensitivity adjustable: Turn on lights during day or nights
It can use with lamps, incandescent lamps (bulbs), old-fashioned fluorescent lamps, electronic fluorescent ring lamps, spotlights, transformers, small electrical appliances, and all other appliance
A good solution for energy-saving and easy to install. Delay adjustment: 10 Seconds - 7 Minutes and Adjustable
Sq Type Microwave Motion Sensor
Product Size : 5.5 x4x 2.5 cm Adjustable Function: Time delay (8 Sec to 12 Min), Sensitivity (1-8m Radii), Light Setting (2-2000 Lux)
18 Months Mfg Warranty
Detection angle: 360/ Rated load: 1200Watt/Ideal installation height: 2 - 4 m. HF system : 5.8GHz CW radar,ISM band, Connection Point: L:- Phase/Line, N - Neutral i.e. (commaon for Both I/p and O/p) and L':- Load/to light
This microwave motion sensor reflects the development in interior lighting technology and provides close to zero energy wastage in terms of lights being on unnecessarily
Quick Sense (Qs-06): Plastic 360 Degree Mini PIR Motion Sensor 220V (White, Max 100W) -2 Pieces Pack
MINI PIR Sensor Switch, Max load: 100 w
Power Sourcing: 220V/AC-240V/AC, Detection Range: 360�°
Can identify day and night: The consumer can adjust work ambient light. It works in the daytime and at night when it is adjusted on the â??+(sun)â?? position (max). It works in the ambient light of less than 10LUX when it is adjusted on the â??-(moon)â?? position (min). As for the adjustment pattern, please refer to the testing instructions.
Time-Delay is added continually: When it receives the second induction signals after the first induction, it will compute time once more on the basis of the first time-delay rest.
It can use with lamps, incandescent lamps (bulbs), old-fashioned fluorescent lamps, electronic fluorescent ring lamps, spotlights, transformers, small electrical appliances, and other all other appliance.
2408 Electric Sensors Suppliers
Short on time? Let Electric Sensors sellers contact you.
Quick Sense (Qs-06): Plastic 360 Degree Mini PIR Motion Sensor 220V (White, Max 100W) -2 Pieces Pack
MINI PIR Sensor Switch, Max load: 100 w
Power Sourcing: 220V/AC-240V/AC, Detection Range: 360�°
Can identify day and night: The consumer can adjust work ambient light. It works in the daytime and at night when it is adjusted on the +(sun) position (max). It works in the ambient light of less than 10LUX when it is adjusted on the â??-(moon)â?? position (min). As for the adjustment pattern, please refer to the testing instructions.
Time-Delay is added continually: When it receives the second induction signals after the first induction, it will compute time once more on the basis of the first time-delay rest.
It can use with lamps, incandescent lamps (bulbs), old-fashioned fluorescent lamps, electronic fluorescent ring lamps, spotlights, transformers, small electrical appliances, and other all other appliance.
Quick Sense(Qs-WR05): Touch Smart IR Sensor for Auto Lights
It is a Touch Sensor. Its ON or OFF is controlled by touch metal. When your hands touch any metal surface connected by the metal ring, it gets detection and turns on the light. The light will be switched off when your hands touch again.
Power source: 220-240V/AC
Power Frequency: 50/60Hz
Install the product on the wall with two enclosed inflated s
Connecting the power and the load to the sensor as the connection-wire diagram
Switch on the power an
Lux: turn on the lights during the day or night
Automatic Sensor Light Control Switch/ It can use Street Light, Garden Lights, Incandescent lamps, LED lights
Sensitivity adjustable: Turn on lights during day or nights
It can use with lamps, incandescent lamps (bulbs), old-fashioned fluorescent lamps, electronic fluorescent ring lamps, spotlights, transformers, small electrical appliances, and all other appliance
A good solution for energy-saving and easy to install. Delay adjustment: 10 Seconds - 7 Minutes and Adjustable
Description: Ultra High Sensitivity SF6 Trace Gas Leak Detector-Q200
Sensor: Electron capture
Leak Rate:1 x 10-8 ml/s 0.1ppm
[With optional capillary inlet,1 x 10-10mL/s SF6]
Response:1 sec (85% of reading)
Concentration Sensitivity 0.01 ppm
Recovery time 1sec
Options Calibrated leaks
Battery use time 20 Hours
Display Alpha numeric VFD
Manufacturing Standards To ISO 9001:2015 Certified,to CE requirements
Service life:more than 20years
HM612 is a newest smart digital motion detector. This Smart digital detector offers a complete motion detector solution, with all electronic circuitry built into the detector housing. Only a power supply and power-switching components need to be added to make the entire motion switch, a timer is included. The series has versions which can include ambient light level and sensitivity adjustments.
Senba Pyroelectric Infrared Sensors with high sensitivity, low noise and reliable performance. We have our own research and development department, with international technology and Hybrid IC technique expertise developed more than 15 years. The goods come standard with enhanced immunity to RFI (Radio Frequency Interference) and 2.4G high frequency interference. Senba PIR sensor suppport delay time, sensitivity adjustable, lighting adjustable.
Senba Pyroelectric Infrared Sensors with high sensitivity, low noise and reliable performance. We have our own research and development department, with international technology and Hybrid IC technique expertise developed more than 15 years. The goods come standard with enhanced immunity to RFI (Radio Frequency Interference) and 2.4G high frequency interference. Senba PIR sensor suppport delay time, sensitivity adjustable, lighting adjustable.
The HR series dual-core radar level sensor is a non-contact, microprocessor controlled, easy to install and maintain digital level instrument. Through the antenna emitter narrow and low power microwave pulse signals, the pulse signal in the space at the speed of light transmission, encounter reflects measured medium, reflected signal is received, the pulse signal of the transmitted pulse signal and receiving time interval and the datum is proportional to the distance to the surface of the measured medium, the emitting and receiving by measuring the time interval, to realize the antenna to the surface of medium distance measurement.
Built-in LCD display, convenient site setting. It doesn't have to contact industrial media can meet the requirements of most of the material level measurement, so as to thoroughly solve the disadvantages of pressure type, capacitance type, float type of traditional measurement methods such as winding, jam, leaking, corrosion medium, safeguard inconvenience. Thus can be widely used in plastics, coal, grain, sewage disposal, petroleum, chemical, food and beverage, pharmaceutical and other industries. Non-contact measurement, corrosion resistance, easy installation, high measuring accuracy, fast response, long life, good stability, large span, can be used to measure the height of liquid and solid material, in the barn, oil tank, chemical raw materials tank, sewage pool, high corrosive environment, requirements of hygiene, environment of material level measurement is widely used.
Manufacturer: Texas Instruments
IC DRIVER 4/0 16SOIC
Applications:
- Chemical and Gas Sensors
- Field Transmitters: Temperature Sensors and Pressure Sensors
- Military: Radars and Sonars
- Motor Control: Brushless DC and Brushed DC
- Military and Avionics Imaging
- Temperature Sensors and Controllers Using Modbus
Our company is also pleased to offer products of other brands:
Bei Sensors
IBH Softec
Schmersal
BALLUFF
Pepperl+Fuchs
Bernstein
Di-Soric
Elobau
Univer
Eltra
Aventics
FESTO
Camozzi
Euchner
END-Armaturen
TAMAGAWA
SENECA
Airtac
Murrelektronik
Azbil Yamatake
FRANKE-Filter
Endress+Hauser
IFM
Ipf Electronic
Kieback & Peter
MD Micro Detectors
Bihl Wiedemann
ANDERSON-NEGELE
KITAGAWA
Georg Schlegel
Metal Work
Kipp
Allen-Bradley
Netter Vibration
Kuebler
RAFI
LINDY
4B Braime
SOUTHCO
ELGO Electronic
FAG
RECO
Pilz
AIRTEC Pneumatic
COMITRONIC-BTI
Hydac
Barksdale
Keyence
AirCom Pneumatic
Garlock
Mac Valves
MAHLE (Filtration Group)
Riegler
Baumer
Elreha
Sick
Siko
FAMAGA Group OHG is a family-owned company with many years of experience in the supply of components and spare parts for industrial enterprises around the world.
Our mission is to provide fair prices, reducing the cost of production for our customers.
A significant network of suppliers around the world allows us to supply any equipment, which client needs on favorable terms.
Therefore, the list of equipment we provide is tenfold greater than the catalog presented on this site.
You are welcome to check the full catalog on our website.
LD15 Laser PM2.5 Dust Sensor Model Product Details
Product overview
Particle sensor pm2.5 LD15 is a high-precision particle sensor based on the theory of laser MIE scattering. It can continuously collect and calculate the number of suspended particles with different particle sizes in air per unit volume, that is the concentration distribution of particles, and then convert to mass concentration. And output in the form of universal digital interface.
The sensor can be embedded with various instruments related to the concentration of suspended particulates in the air or environmental improvement equipments to provide timely and accurate concentration data.
LD15 Laser PM2.5 Dust Sensor Model
Working principle
laser sensor LD15 adopts MIE spherical particle scattering principle, that is, laser sensor uses laser to irradiate suspended particulate matter in the air to produce light scattering, photoelectric detector collects scattering light intensity in a certain angle range, the scattering light intensity will be linearly converted to voltage, and then sent to data processing system, the data processing system take the principle of Michaelis scattering theory to deal with the datas, then the equivalent particle size and the number of particles with different particle sizes per unit volume are obtained.
Main feature
1 High measure accuracy up to 0.1�¼m
2 Zero error alarm rate
3 Real-time response and support for continuous data collecting
4 Minimum resolution particle size 0.1�¼m
5 Electronic controlled devices lifetime > 8 years, average working time > 5 years.
6 Wide range of application, no need for air duct design, compatible with multi-protocol output
7 light and thin design, suitable for detectors, wearerable equipments, air purifiers, fresh air systems, etc.
8 Six-sided shielding combined the software anti-jamming algorithm, with higher anti-jamming performance
Typically Application
(1) Particle monitor instruments
Note 1 : Maximum range means that this sensor ensures that the maximum output value of pm2.5 standard value is not less than 1000 u g / m3. when the data is > 1000 u g / m3. pls take the actual measure value
Note 2 : the consistency data of the particle concentration is the data in the appendix -Measuring temperpture condition is 20,humidity condition is 50% .
GDS06 Infrared PM2.5 Sensor Model Product Details
1 PRODUCT SUMMARY
Infrared Particle Sensor module GDS06 By using the principle of optical radiation, the dust sensor products by thetransformation of the light path and circuit, measure the dust density in the range of themeasurement, can be directly application of single-chip microcomputer UARcommunication. Small size, high precision, low power consumption, wide measuringrange, short response time and quick application.
GDS06 Infrared PM2.5 Sensor Model
1.1 APPLICATIONS SCOPE
Air-conditioning
Air purifier
Portable detector
Other household electrical appliances
Automotive air purificationFresh air system intelligent detector
Fresh air system
Intelligent detector
1.2 THE BASIC FEATURES
Sensor parameters
Sensor parameters
In principle this product only applies to the above applications. When used for other purposes, users are required to authenticate themselves.
Please far away from the high frequency high voltage placing signage at the product, inorder to avoid the interference caused by high frequency high voltage.
No rule of the violent vibration will cause the product measurement error increases.
Outside light will cause the measuring error of the products increases, so when installedon the equipment, should try to avoid the outside world of incoming light.
This product inspection hole not plug or objects into larger particles, please install behindthe screen. Recommended filter size: 10-20 m um, thickness: 3-5mm.
Item Name: Water Level Sensor Float Switch
Item No: CFS-103L
Color: black
Cable Length: 350mm / 13.78inch
Switch Size: OD17 x 85mm
Thread Dia(Approx) : M16*1.5
Max Contact Rating: 10W
Float Body Material: polypropylene
Float Ball Material: polypropylene
Working Voltage: AC110V-220V
Working Temperature: -10~85
Max Temperature: 85
Working Pressure: 0.4 Mpa
Max Pressure: 0.4Mpa
Max Switching Current: 0.5A
Max Breakdown Voltage : 220VDC
Max Carry Current : 1.0A
Max Contact Resistance: 100m Ohm
Max Carry Current : 1.0A
OUTPUT : 4-20 MA
SUPPLY : 24 VDC
TYPE :2 WIRE
PRESSURE TRANSMITTER CAPSULE TYPE
PROTECTION CLASS : IP 65
PROCESS CONNECTION : 1/2 " BSP;1/2"NPT ;1/4"BSP;1/4"NPT
FIXED RANGE CAPSULE TYPE
This item will be shipped to Seoul, Korea.
We share the available quantity with a price according to the schedules.
1) 12th on April: 20,000 -> sold out
2) 22nd on April: 20,000 -> Booked (but, there is a possibility of cancellation.)
If the buyer will cancel their order, we can give you information by email or whatsapp.
unit price: $8/1pcs, Advanced T/T
3)15th on May: 20,000 unit price: $5.5/1pcs, Advanced T/T bank transfer
Product data sheet
http://file2.dzsc.com/product/18/09/02/1140443_111
2408 Electric Sensors Suppliers
Short on time? Let Electric Sensors sellers contact you.
