Quick Sense(Qs-WR02): Wardrobe/Cabinet Smart IR Sensor
Quick Sense(Qs-WR03): Mirror/Hand Smart IR Sensor for Auto Lights Auto On and Off Upon Moving Hand
Power source: 220-240V/AC
Power Frequency: 50/60
Install the product on the wall with two enclosed inflated s
Connecting the power and the load to the sensor as the connection-wire diagram
Switch on the power an
It is a Short Distance IR Sensor. Its ON or OFF is controlled by hand movements. When you move your hands towards the IR sensor, it gets detection and turns on the light. The light will be switched off until the IR sensor detects another movement by hand. NOTE: In front of the detection window there shouldnâ??t be hinder or unrest objects affecting detection
Quick Sense Wardrobe Cabinet Hinge LED Motion Sensor Night Light System (White, 0.25 W) - Set of 10 Pack Smart Sensor Light
Specifications:
Material: ABS; Color: Grey
Lighting Color: Warm white/Cool white (Optional)
Battery: 12V 23A(Not Included)
Type: Smart Sensor; Bead Quantity of Each Light: 3pcs
How to Installation:
Step1: First open the hinge screws on the backsheet
Step2: Put the back sheet screws and hinges screwed together
Step3: Put the battery into the LED hinge light
Step4: Make LED lighting into the card pre-installed on a good film
Step5: Put the thickest chucking and complete
Can be used in your home cabinet, closet, cupboard, or wardrobe with a hinge. Note: suitable for hinges like the picture, the screw in the hinge must be screwed off, the led light base need to be mounted in there
It can use with lamps, incandescent lamps (bulbs), old-fashioned fluorescent lamps, electronic fluorescent ring lamps, spotlights, transformers, small electrical appliances, and other all other appliance
Good solution for energy saving and easy in installation. and Delay adjustment: 10 Seconds - 7 Minutes and Adjustable Lux: turn on the lights during the day or night
Using the automatic control product of infrared technology,when people walk into the sensor range,and the sensor can detect the spectral change of the human body infrared ray,during this time,the switch will connect the load automatically until the person leaves the sensor range. 2, Through the photosensitive control , it will not turn on the lights in the daytime or light environment, but also can be adjusted in any lighting environment sensing lights
Sensitivity Adjustable: Turn on Lights during Day or nights
It can use with lamps, incandescent lamps (bulbs), old-fashioned fluorescent lamps, electronic fluorescent ring lamps, spotlights, transformers, small electrical appliances, and other all other appliance
Good solution for energy saving and easy in installation. and Delay adjustment: 10 Seconds - 7 Minutes and Adjustable Lux: turn on the lights during the day or night
Using the automatic control product of infrared technology,when people walk into the sensor range,and the sensor can detect the spectral change of the human body infrared ray,during this time,the switch will connect the load automatically until the person leaves the sensor range. 2, Through the photosensitive control , it will not turn on the lights in the daytime or light environment, but also can be adjusted in any lighting environment sensing lights
Sensitivity Adjustable: Turn on Lights during Day or nights
Light turns on in the dark and turn off on daytime, intelligent sensor, no need to operate by manual
Fully Automatic Switching On And Off Operation.
Automatic Sensor Light Control Switch/ It can use Street Light, Garden Lights, Incandescent lamps, LED lights. If you have any queries feel free to contact us. Quick Sense Innovations Official site. packing is tested before dispatched so that the item reaches the buyer safely and undamaged.
Working: As shown in the above diagram out of three wire's Red: Load, Blue: Neutral & Brown: Phase. Connect Red & Blue to Load Application were using (i.e. Lighting) & Brown and Blue to 230 VAC input supply. Now it is ready to operate Day/Night mode. For testing keep the torch over to the Photocell load will turn ON.
Automatic Sensor Light Control Switch/ It can use Street Light, Garden Lights, Incandescent lamps, LED lights. If you have any queries feel free to contact us. Quick sense innovations. Packing is tested before dispatched so that the item reaches the buyer safely and undamaged.
2359 Electric Sensors Suppliers
Short on time? Let Electric Sensors sellers contact you.
Turn on the lights during the day or night
Automatic Sensor Light Control Switch/ It can use Street Light, Garden Lights, Incandescent lamps, LED lights
Sensitivity adjustable: Turn on lights during day or nights
It can use with lamps, incandescent lamps (bulbs), old-fashioned fluorescent lamps, electronic fluorescent ring lamps, spotlights, transformers, small electrical appliances, and all other appliance
A good solution for energy-saving and easy to install. Delay adjustment: 10 Seconds - 7 Minutes and Adjustable
Sq Type Microwave Motion Sensor
Product Size : 5.5 x4x 2.5 cm Adjustable Function: Time delay (8 Sec to 12 Min), Sensitivity (1-8m Radii), Light Setting (2-2000 Lux)
18 Months Mfg Warranty
Detection angle: 360/ Rated load: 1200Watt/Ideal installation height: 2 - 4 m. HF system : 5.8GHz CW radar,ISM band, Connection Point: L:- Phase/Line, N - Neutral i.e. (commaon for Both I/p and O/p) and L':- Load/to light
This microwave motion sensor reflects the development in interior lighting technology and provides close to zero energy wastage in terms of lights being on unnecessarily
Quick Sense (Qs-06): Plastic 360 Degree Mini PIR Motion Sensor 220V (White, Max 100W) -2 Pieces Pack
MINI PIR Sensor Switch, Max load: 100 w
Power Sourcing: 220V/AC-240V/AC, Detection Range: 360�°
Can identify day and night: The consumer can adjust work ambient light. It works in the daytime and at night when it is adjusted on the â??+(sun)â?? position (max). It works in the ambient light of less than 10LUX when it is adjusted on the â??-(moon)â?? position (min). As for the adjustment pattern, please refer to the testing instructions.
Time-Delay is added continually: When it receives the second induction signals after the first induction, it will compute time once more on the basis of the first time-delay rest.
It can use with lamps, incandescent lamps (bulbs), old-fashioned fluorescent lamps, electronic fluorescent ring lamps, spotlights, transformers, small electrical appliances, and other all other appliance.
Quick Sense (Qs-06): Plastic 360 Degree Mini PIR Motion Sensor 220V (White, Max 100W) -2 Pieces Pack
MINI PIR Sensor Switch, Max load: 100 w
Power Sourcing: 220V/AC-240V/AC, Detection Range: 360�°
Can identify day and night: The consumer can adjust work ambient light. It works in the daytime and at night when it is adjusted on the +(sun) position (max). It works in the ambient light of less than 10LUX when it is adjusted on the â??-(moon)â?? position (min). As for the adjustment pattern, please refer to the testing instructions.
Time-Delay is added continually: When it receives the second induction signals after the first induction, it will compute time once more on the basis of the first time-delay rest.
It can use with lamps, incandescent lamps (bulbs), old-fashioned fluorescent lamps, electronic fluorescent ring lamps, spotlights, transformers, small electrical appliances, and other all other appliance.
Quick Sense(Qs-WR05): Touch Smart IR Sensor for Auto Lights
It is a Touch Sensor. Its ON or OFF is controlled by touch metal. When your hands touch any metal surface connected by the metal ring, it gets detection and turns on the light. The light will be switched off when your hands touch again.
Power source: 220-240V/AC
Power Frequency: 50/60Hz
Install the product on the wall with two enclosed inflated s
Connecting the power and the load to the sensor as the connection-wire diagram
Switch on the power an
Lux: turn on the lights during the day or night
Automatic Sensor Light Control Switch/ It can use Street Light, Garden Lights, Incandescent lamps, LED lights
Sensitivity adjustable: Turn on lights during day or nights
It can use with lamps, incandescent lamps (bulbs), old-fashioned fluorescent lamps, electronic fluorescent ring lamps, spotlights, transformers, small electrical appliances, and all other appliance
A good solution for energy-saving and easy to install. Delay adjustment: 10 Seconds - 7 Minutes and Adjustable
Description: Ultra High Sensitivity SF6 Trace Gas Leak Detector-Q200
Sensor: Electron capture
Leak Rate:1 x 10-8 ml/s 0.1ppm
[With optional capillary inlet,1 x 10-10mL/s SF6]
Response:1 sec (85% of reading)
Concentration Sensitivity 0.01 ppm
Recovery time 1sec
Options Calibrated leaks
Battery use time 20 Hours
Display Alpha numeric VFD
Manufacturing Standards To ISO 9001:2015 Certified,to CE requirements
Service life:more than 20years
The HR series dual-core radar level sensor is a non-contact, microprocessor controlled, easy to install and maintain digital level instrument. Through the antenna emitter narrow and low power microwave pulse signals, the pulse signal in the space at the speed of light transmission, encounter reflects measured medium, reflected signal is received, the pulse signal of the transmitted pulse signal and receiving time interval and the datum is proportional to the distance to the surface of the measured medium, the emitting and receiving by measuring the time interval, to realize the antenna to the surface of medium distance measurement.
Built-in LCD display, convenient site setting. It doesn't have to contact industrial media can meet the requirements of most of the material level measurement, so as to thoroughly solve the disadvantages of pressure type, capacitance type, float type of traditional measurement methods such as winding, jam, leaking, corrosion medium, safeguard inconvenience. Thus can be widely used in plastics, coal, grain, sewage disposal, petroleum, chemical, food and beverage, pharmaceutical and other industries. Non-contact measurement, corrosion resistance, easy installation, high measuring accuracy, fast response, long life, good stability, large span, can be used to measure the height of liquid and solid material, in the barn, oil tank, chemical raw materials tank, sewage pool, high corrosive environment, requirements of hygiene, environment of material level measurement is widely used.
Manufacturer: Texas Instruments
IC DRIVER 4/0 16SOIC
Applications:
- Chemical and Gas Sensors
- Field Transmitters: Temperature Sensors and Pressure Sensors
- Military: Radars and Sonars
- Motor Control: Brushless DC and Brushed DC
- Military and Avionics Imaging
- Temperature Sensors and Controllers Using Modbus
Our company is also pleased to offer products of other brands:
Bei Sensors
IBH Softec
Schmersal
BALLUFF
Pepperl+Fuchs
Bernstein
Di-Soric
Elobau
Univer
Eltra
Aventics
FESTO
Camozzi
Euchner
END-Armaturen
TAMAGAWA
SENECA
Airtac
Murrelektronik
Azbil Yamatake
FRANKE-Filter
Endress+Hauser
IFM
Ipf Electronic
Kieback & Peter
MD Micro Detectors
Bihl Wiedemann
ANDERSON-NEGELE
KITAGAWA
Georg Schlegel
Metal Work
Kipp
Allen-Bradley
Netter Vibration
Kuebler
RAFI
LINDY
4B Braime
SOUTHCO
ELGO Electronic
FAG
RECO
Pilz
AIRTEC Pneumatic
COMITRONIC-BTI
Hydac
Barksdale
Keyence
AirCom Pneumatic
Garlock
Mac Valves
MAHLE (Filtration Group)
Riegler
Baumer
Elreha
Sick
Siko
FAMAGA Group OHG is a family-owned company with many years of experience in the supply of components and spare parts for industrial enterprises around the world.
Our mission is to provide fair prices, reducing the cost of production for our customers.
A significant network of suppliers around the world allows us to supply any equipment, which client needs on favorable terms.
Therefore, the list of equipment we provide is tenfold greater than the catalog presented on this site.
You are welcome to check the full catalog on our website.
Item Name: Water Level Sensor Float Switch
Item No: CFS-103L
Color: black
Cable Length: 350mm / 13.78inch
Switch Size: OD17 x 85mm
Thread Dia(Approx) : M16*1.5
Max Contact Rating: 10W
Float Body Material: polypropylene
Float Ball Material: polypropylene
Working Voltage: AC110V-220V
Working Temperature: -10~85
Max Temperature: 85
Working Pressure: 0.4 Mpa
Max Pressure: 0.4Mpa
Max Switching Current: 0.5A
Max Breakdown Voltage : 220VDC
Max Carry Current : 1.0A
Max Contact Resistance: 100m Ohm
Max Carry Current : 1.0A
OUTPUT : 4-20 MA
SUPPLY : 24 VDC
TYPE :2 WIRE
PRESSURE TRANSMITTER CAPSULE TYPE
PROTECTION CLASS : IP 65
PROCESS CONNECTION : 1/2 " BSP;1/2"NPT ;1/4"BSP;1/4"NPT
FIXED RANGE CAPSULE TYPE
This item will be shipped to Seoul, Korea.
We share the available quantity with a price according to the schedules.
1) 12th on April: 20,000 -> sold out
2) 22nd on April: 20,000 -> Booked (but, there is a possibility of cancellation.)
If the buyer will cancel their order, we can give you information by email or whatsapp.
unit price: $8/1pcs, Advanced T/T
3)15th on May: 20,000 unit price: $5.5/1pcs, Advanced T/T bank transfer
Product data sheet
http://file2.dzsc.com/product/18/09/02/1140443_111
"Telemecanique Inductive Proximity Sensors OsiSense XS series (extended sensing range) allow you to detect all types of objects in all applications providing high detection performance for metal objects. This inductive sensor range with industry recognised high performing technology provide non-contact detection of material up to 20 mm. Inductive proximity sensors are available in flush and non-flush models (shielded and non-shielded).
OsiSense inductive proximity sensors are purely for detecting any metal objects up to 60 mm and include an oscillator with windings (an alternating magnetic field is generated in front) making up the sensing phase."
Key-Wound Temperature Chart Recorders are equipped with liquid or air sensors, offer selectable 24-hour or 7-day operation and recording, and have a temperature range of 0�°â??150�°F. MA-80 models are wall-mounted while MA-81 units are portable. No power source or batteries are required for operation. Air sensors have bendable 14-3/8in (365mm) cable and liquid sensors are supplied with 5ft (1.5m) cable. Units include a package of 100 MAA-60 7-Day Charts and a felt-tip pen. Additional 7-Day and 24-Hour Charts for Temperature Recorder, and a package of five MAA-62 Felt-Tip Pens are available separately. Inquire for models with NIST-traceable calibration. Temperature sensors contain mercury and may be restricted for sale in some areas; check local regulations before ordering. Also, inquire for Temperature Recorders in other F or C ranges, and/or electric or battery-operated drives.
2359 Electric Sensors Suppliers
Short on time? Let Electric Sensors sellers contact you.
