Air cooled (PM) gasoline generating set
1.1 Gasoline Engine Powered:
5.0/6.0 kW using Yamaha engine with rare earth PM alternator
8.0/10.0/12.5/13.5/14.0/15.0kW using Kohler engine with rare earth PM alternator
Special Features:
+. Free excitation winding, magnetizing exciter, AVR, etc. Efficiency and power factor 20% higher than common excitation generator.
+. It can lead inductive load of 80% self-capacity such as UPS, air conditioner, electric motor, etc. while common generator usually under 34%.
+. High reliability, simple maintenance and operation
+. High power density, high voltage stability for shock load.
+. Voltage fluctuation ratio less than 0.5%, waveform distortion ratio less than 2%, applicable for high electricity quality requirement, particularly bank, telecom. Army etc.
Providing customized high quality services covering from system design of power plant, electromechanical equipment design and development, and manufacturing technique design, and manufacture, and testing, and inspection and after-sale service
3 phase mains and 3 phase generator voltage measurement,
3 phase load current and earth current measurement,
Contactor open and close relay outputs for mains and generator,
Configurable 6 inputs and 4 outputs,
3 resistive sender inputs for oil pressure, temperature and level,
Stop or fuel selenoid selection,
Programmable weekly working permit calendar,
Maintenance warning (working hour or elapsed month),
Exercise at programmed time intervals,
Off, manual, auto and test mode,
Power measurement by kva, kw, kvar, kvah, kwh, kvarh,
Compatible to diesel or gas generators
* sends sms to pre-defined gsm numbers for alarms
* controls the generator and monitors status information of the generator by sms
* remote control via internet, intranet, gsm or dial-up modem
* access to multiple generators by gen-agent scada software
* authorised access, secure communication
* suitable for telecommunication projects
* automatic transfer switching control and engine control
* logs last 32 events & alarm informations
* full metering facility, energy and power measurement
3798 Electric Power Generators Suppliers
Short on time? Let Electric Power Generators sellers contact you.
In dingol alternator factory, there are 5 engineers come from newage stamford factory in product engineering dept., quality dept., manufacturing dept., material dept. Dingol alternators own the same material, suppliers as wuxi stamford alternators.
Dingol have more than 1000 units capacity per month and have achieved iso9001:2000 certificate and ce certificate for quality system in attachments for your reference.
Maker : CAT Generators
Model:PGS400
Per Unit 456 KVA (364 KW) Year 1999
4 Units(All Control Panel together)
Engine:CAT 3406
440 V 254 V 60HZ RPM 1800
Serial No : 9ES02515,9ES02535,9ES02516,9ES02995.
Brand Mitsubishi
Model gku30a
Engineg : mitsubishi 18ku30a X 2set W/paralleling Equp.
Rated : g5650kw / 50hz / 750rpm 6600v
Running Hours : g40000 Hrs Since New
Mfg. Year : g2001
Conditiong : Excellent accessories included
Made In Japan ready for ship.
Brand cummins : Power Generator
Model : 880dfhd
Engine : cummins Qst30-g4
Rated: 880kw / 50hz / 1500rpm
Running Hours : 1106 Hrs Since New
Mfg. Year : 2005
Condition : excellent
Made In USA.
YTF Series Three 3 Phase AC Permanent Magnet Synchronous Wind-Turbine Generator
YTF Series small permanent magnet synchronous wind-turbine generator is applied to the off grid wind-turbine generator system.Its output is symmetrical alternating current.The special materials protect the product free from corrosion or other weather damage,such as moisture,dry and sand etc . It is of high efficiency ,long serive life ,as well as eco-friendly character.
The parameter is as follows.The OEM is acceped.
type rated power
(KW) rated
revolution
(r/min) Rated
Voltage
(V) Efficiency
% MAX
Start-up
force (Níºípm)
YTF300 0.3 400 28 70 0.3
YTF500 0.5 350 28 72 0.6
YTF1000 1.0 300 56 74 1.0
YTF2000 2.0 300 115 75 2.0
YTF3000 3.0 220 115 76 3.0
YTF5000 5.0 180 230 78 4.0
YTF7500 7.5 180 230 80 5.5
YTF10000 10 180 230 82 7.0.
The equipment takes agricultural and forest waste, such as rice husk, wood chips, coconut fiber dust, saw dust and crop stalks etc as the raw biomass fuel. These biomass fuels will be gasified into rough gas in the Gasifying Furnace, which is our patented product. Then after a series of cleaning and cooling treatment, the purification of the gas will be pure enough to meet the requirement of gas needed by the internal combustion engine to generate electric power.
Available biomass fuels:
Agriculture and forest residues, such as rice husk, crop stalks coconut fiber dust, palm shell, pruned fruit tree branch, wood chips, chips from timber processing factory and so on.
Biomass gas from Fengyus fluidized bed can not only be sent to internal combustion engine for electric power generation but can also be used for household fuel to cooking and heating. It also can be send to boiler or hot-blast furnace to produce steam or hot air for drying
Index:
Model:LHC-100 LHC-300
Generator rated output power:100-300KW
Production volume of biomass gas 2250Nm/3hr
Gas temperature of the outlet after cleaning and cooling:under 45 degree celsius
Consumption of biomass fuel:0.9-1.8ton/hr(for rice husk)
Weight:2.0-3.8ton
Main component and caloricity of biomass gas are different for difference of characteristic of biomass fuel gasification method, the caoricity of biomass of gasification is normally 1100-1500kcal/Nm3.(4.6-6.3MJ/Nm3)
Biomass gas component:
CO:17.2%
H2:4.05%
CH4:6.82%
CmHn:1.24%
H2S:----
CO2:15.1%
O2:0.8%
N2:54.7%.
Voltage set-upThe voltage set up when the remnant magnetism greater than 4v 25hz
Input power supply Ac 160~260v 50/60hz
Max outputDc 5a 95v(when the voltage reaches ac 240v)
Frequency compensationBuilt-in low speed protective circuit.
RegulationLess than 1%.
