Voltage: 240/50 v/hz
Output shaft rotation: c.W
Shaft diameter: 6.0
No. Of speed:
Free load rated load stop torque
High 9" fan
2850 rpm 1850 rpm
0.19 a 0.21 a 0.23 a
27 w 30 w
Low 9" fan
2820 rpm 1600 rpm
0.14 a 0.16 a 0.17 a
21 w 23 w
Voltage: 120/60 v/hz
No of speed: 3
On load fan:
Speed (rpm) +/- 100 a +/- 10% w +/- 10%
Hi 1250 0.30 35
Med 1150 0.25 30
Low 950 0.22 27
Stop torque: 0.36 a, 43 w
Fuse: 115 c
Cap: 2.0 mf
Autormatic tilting at the ground
Platfrom tilt adjustable at any position
Low maintenance bushes fitted to all pivot points
electrical safety valves mounted to all lift and tilt cylinders (option)
Easy to use,easy installation,easy maintenance
Water-proof control case and compulsory use of two hands
Trolley stop (option)
Rear bumper
Mechanical chain lock to prevent the open of platform accidentally
Warning label
Wanderlead Control
Seaworthy export packing,suitable for long distance ocean transportation
Byj series stepper motor
Model 35BYJ46
Rated voltage 12VDC
Number of Pole 4
Speed Variation Ratio 1/85.25
Stride Angle 7.5fp /85.25
DC resistance 130ohmf+7%(25k)
Idle In-traction Frequency >500Hz
Idle Out-traction Frequency >800Hz
In-traction Torque >78.4mN.m(120Hz)
Self-positioning Tor >39.2mN.m
insulated resistance >10ohm(500V)
insulated electricity power 600VAC/1mA/1s
Insulation grade A
Rise in Temperature <40K(120Hz)
Noise <40dB(A)
Weight about 60g
BYJ stepping motor mainly used in wind guiding board of fission air conditioner in house,wind heat fire placesing board etc.,
Note:
1,Colour&length of conducting ire can be made according to the requirement of users.
2,The output shaft can be made according to the consumers need.
3,Working voltages and frequencies can be made as per users' requirements.
4,Installation dimension can be made according to user's requirements
Synchronous motor
Model 42TYJ-F
Rated voltage 220/240V
Power consumption <4W
Input current <25mA
Rated frequency 50/60Hz
Torque >2kgf.cm
Speed 15-18r/min
Starting voltage <176V
Insulation resistance <100Mohm
Dielectric strength 1500VAC/1min
Noise <35dB(A)
Coil temperature rise <60K
Insulation class E
CW,CCW dual direction control
42TYJ synchronous motor mainly used in Stage Lighting ,Rotating Christmas Tree,Stand Electric Toy and varied rotating crafts.
Note:
1,The two ends of capacitor are respectively connected to the lead risers of the red and yellow wires.
2,Connect the terminal posts 1 and 2 to power source and view from the shaft-extension end,the output shaft turns anticlockwise.Connect the terminal posts 2 and 3 to power source and the output shaft turns clockwise.
Type:wiper motor, hot wind motor, dc motor, medical equipment motor
Voltage:12v/24v
Walt: 20w-180w
Remark: we are professional auto wiper manufacturer, we produce many kinds of wiper motor, hot wind motor and so on.
Motor
Ywell indutry &trade co., ltd is a professional manufacturer and exporter of electric water pump, air compressor, motor generator and gasoline water pump in china. From established in 1987.Ywell has developed itself continousely, on the basis of a qualified tech-group and stable-skilled workers team, ywell always provides our customers products with good quality.
Ywell products cataguory:
1.Pump: deep well pump, jet pump, centrifugal / periferal/inline /gasoline pump
2. Motor:y2, y, yd, yct, yej2,
3.Compressor: direct-connected compressir, belt-driven comprsessor
4.Generator:0.8kw, 1.8kw, 2.0kw...
Hi-speed cut-size web sheeter
Introduction:
This machine is developed and consummated from our Servo Motor Driving Hi-Speed Sheeting & Ruling Line. Germany MKS or USA Rockwell motion controller with 5 modules. Mature and reliable control system. It is absolutely a global summit elite finished on the shoulder of a giant.
Servo motor or AC motor with V.F drive for transmission. Precision mechanical structure. High speed. Easy operation. It is an ideal equipment for a converting plant to sheet a web sheet roll into different sized sheets.
Features:
1. This machine employed German MKS or USA Rockwell Motion Controller with modules. Servo motor or variable frequency driving. MMI (man-machine interface) with touch screen control. Very simple and easy operation.
2. The MMI is for central parameter setting, display, live inspection and control of each part's working states.
3. The whole machine is linked and protected by a top PLC system. Sheeting length and speed are controlled by computer. Easy adjustment. Sheet accuracy is within 0.5mm.
4. Unwinder is a hydraulic over-turn turret. Conic loading. Big pneumatic torque brake. Floating manipulator with tension inspection. Automatic curved web paper open flat. Sheet squaredness is adjustable. Sheet on sheet conveying. Fast and stable.
5. Bobbin cutter for sheeting. Alloy steel blade. Both variable frequency and servo motor control systems are at request.
6. Blade loading protection offers in time safety protection.
Top precision super hard aluminum alloy rollers are used as the guiding roller.
7. Three units of slitters for edge trimming and longitudinal slitting.
8. Electrostatic bar to eliminate static influence to sheeting speed and sheet fitting.
9. Sheeting blade is with air to make sheet feeding stable and prevent paper particle
10. Sheet rear absorbing air to assist thin sheet conveying at high speed.
11. Pneumatic shaking for sheet fitting. Automatic deep pile lifting and lowering.
12. Waste gate system with other quality inspection systems to push out poorly sheeted pieces and other poor products and convey only good product to the deep pile.
13. Exit air to make sheets enter deep pile smoothly.
II.Related technical parameters
Adopt materials Base paper, art paper, offset paper, NRC paper, paper plastic poly sheet , grey substrate white sheet,etc.
Max. Sheeting speed 300 pcs/min Max. sheeting speed 250 m/min
Sheeting accuracy 5 mm/m Sheeting length 400- 1800 mm
Max. web dia. 1800 mm Web width 500-1420 mm
Deep pile depth 1300 mm Paper weight 55- 550 gsm
Sheeting blade pressure 550 gsm Installed power 25 kw
Weight 11,000 kg Dimensions(L/W/H) 11x4.2x2.5 m
