Find Verified Electric Motors Suppliers, Manufacturers and Wholesalers

6 sets of abb asynchronous motor, 2100kw, 6600v, 212a, 60hz, pf=0.91, 3578rpm.
Manufactured in 1996 but never used and store in warehouse from a cancelled ccpp project. Available with 6 sets of complete fuel(lng) gas compressor modules.

Stepper motor drive
-Bipolar Motor Drive
-Microprocessor based Design
-Operating Voltage up to 80V DC
-Programmable Motor current up to 8A
-Up to 64 Microsteps - Selectable through DIP Switch
-Microstepping for Smooth Operation



Carton Box

Y, y2 three phase induction motor

The structure of completeclosed, self-cooling fan and squirrel cage typed is suitable for the usage under bad environment.

Wate spray fan design principle
The mist fan was designed with the advanced principle of double atomization. The water drips are jetted under the diffusion of the rotating plate and atomized equipment; reduce the diameter of the atomized water drip to 10 um under the centrifugal force. Hence improve the atomization surface area. The atomized water drips are jetted out with gas flow and it improves the surface speed of liquid greatly, speedup the diffusion of the gas molecule, therefore increase the quantity of the evaporation. Also the evaporation absorbs the heat and decreases the temperature, improves the relative humidity and reduces the dust.

Main parts
(1) Fan motor
(2) Impeller
(3) Fan guards
(4) Jet plate
(5) Water tank
(6) Pump
(7) Standing pole (Ground)
(8) Push pedestal (Ground)
(9) Switch box (Wall)

Parameter
(1) Dimension: 650 mm (26inches)
(2) Voltage: 220 ~ 240V
(3) Fan height: adjustable from 1700mm to 2000mm
(4) Fan oscillation adjustable: 90 degrees automatically
(5) Fan tilt adjustable: 30 degrees
(6) Available area: 50 square meters
(7) Temperatures drop: 4 íµ- 8 íµ
(8) Operation Temperature: 20 íµ- 80 íµ
(9) Operation Humidity: 20% - 85%
(10) Quantity of atomization: 0 - 8L/h
(11) Diameter of atomized drip: < 10 um
(12) Capacity:Ground): 38 L
(13) Jet distance: 8 m
(14) G.W: 28.8KG; CBM: 0.20M3

Characteristics
(1) Thin atomized water drips, long range of spraying, no water dropping.
(2) No special demand of the quality of the water and water pressure.
(3) Single used, fine enginery, more agile, wide range of using.
(4) Easy to install, convenient to move.
(5) 90 degrees oscillation, three speed control, blowing without atomization.
(6) Waterproof electric design, safe use
(7) Adjustable misting volume, low noise

Application
The atomized fan was widely used in the public situation without air-condition such as store, wine floor, plant, mill, medicine shop, hothouse canopy, fowl house, fungus planting, tea processing where need ventilation, reducing heat and improving humidity.

Advantage
(1) Compared with the foreign product, we adopt the high quality material---rustproof steel, overcome the problem of dirty forming and cleaning.
(2) Compared with the atomized system with nozzle and plenum pump, our fan can't be blocked and without high pressure.
(3) No need to maintenance, saving power and water, with lower cost, compared with the system with central air-condition and jet house.
(4) Overcome the disadvantage of large air resistance and slow reduction of temperature compared with the system of wet shade.



It include four boxes:
(1)Box 1:POLE 125CM*8CM*15CM
(2)Box 2:WATER TANK 47CM*42CM*43CM
(3)Box 3:GUARDS AND IMPELLER 72CM*72CM*7CM
(4)Box 4:FAN MOTOR,PUSH PEDESTAL,JET PLATE,WATER PUMP 72CM*52CM*20CM

Shotgun

Caliber:18.4mm
Overall length: 923/688mm
Barrel length: 425mm
Overall weight: 3.15kg
Effective range: 50m
Magazin capacity: 5rounds
Chamber pressure: <70mpa
Life: >3000rounds

Electric motor

As a professional manufacturer from china since 1997, we have export our products to more than sixty countries and averagely deliver more than thirty 20'gp containers per month.
And with
Good quality
Excellent after-sales services
Favorable price
Powerful r&d ability, we believe we would achieve more.
Totally enclosed and fan-cooled;
In conformity with iec standard;
High efficiency;
Low noise;
High start torque;
Excellent overload performance;
Suitable for combustible, explosive or corrosive gas environment;
Following series are also available:
Y2, yl, yc, jy;
Aluminum housing series:
Ms, mc, ml, my;

Tubular motor (wss50)

Standard type
Ac. Compact structure, the special design of gearbox supply balanced running, low noise, widely used in electronic screen, roller awning, roller guard against theft curtains and roller garage door.

Technical datas: wss50/10
Nominal torque(nm): 10
Tube diameter(mm): 45
Nominal consumption(w): 140/160
Nominal voltage(v): 230/110
Nominal current(a): 0.60/1.26 for 13rpm; 074/1.55 for 17rpm
Output speed(r/min): 13/17
Frequency(hz): 50hz/60hz
Running time(min): 4min
Thermal protector(c): 130
Protection index: ip44
Net weight(kg): 2.15kg
Total length(mm): 550
Maximum turns(turn): 40
Cable length(mm): 2000

Technical datas: wss50/20
Nominal torque(nm): 20
Tube diameter(mm): 45
Nominal consumption(w): 160/220
Nominal voltage(v): 230/110
Nominal current(a): 0.74/1.55for 13rpm; 0.95/1.99 for 17rpm
Output speed(r/min): 13/17
Frequency(hz): 50
Running time(min): 4
Thermal protector(c): 130
Protection index: ip44
Net weight(kg): 2.15
Total length(mm): 570
Maximum turns(turn): 40
Cable length(mm): 2000



Carton with foam inside

NEMA Series Standard Single Phase Asynchronous Motor desiged and manufactured according to USA NEMA standard and Canada standard, NEMA series single phase asynchronous motor has the strong points like novel pattern, excellent technics and reliable performance. The motor features by low temperature rise, low noise and vibration, as well as high efficiency. The voltage of the series motor is 115/230V, and the frequency is 60HZ. Among the series of motors, the capacitor start and two-valued capacitor motor is suitable for air compressor, small machine tool and other fields requiring higher starting torque. The capacitor-running motor is suitable for ventilation, medical instrument and the fields of light and none loading start.

Standard lot size , weight , dimensions

Permanent magnet DC motor(ETC)
Fan Model: Belt drive all
Phase / Voltage / Hz: 1/115/208-230V
Poles: 4
HP (KW): From 1/74-1/10
Voltage: 12/24/110/120/220 v
Insulation Class: B
Speeds / RPM: 1 Speed (1800)
Capacitor: Cap Start Induction Run
Bearings: Ball/ball
Enclosed/Open Frame: Open dripproof
Rotation: CW/CCW
Auto Thermal Protection : UL
S&P USA Part Code 605262
Current Supplier Marathon/B311

More technical datas, pls contact us and we will show you at once.

Standard Lot Size , Weight , Dimensions

This series motors are of remarkable features, such as compact construction, light weight, attractive appearance, safe and reliable operation, long operation life, excellent performance and easy maintenance. For this series motors, the output ratings and mounting dimensions conform to the specifications of IEC standards and the correlation between them basically agrees with EIN42673. The motors are easy to complete with export machinery and equipment and to supply as spare accessories in the import equipment.

This series motors are designed and manufactured into flameproof type and the flameproof property conforms to China National Standards:

GB3836.1-2000 Electrical Apparatus for Explosive Gas Atmospheres-General Requirements.
GB3836.2-2000 Electrical Apparatus for Explosive Gas Atmospheres-
Flameproof Enclosure d and standards IEC79-1, BS4683 and EN50018. The explosion protection marks are Exd I, Exd II AT4 and Exd II BT4. They are safe to use in the locations where there are explosive mixtures.
Of gas- and vapor-air. ExdI- safe for use in the non-mining surfaces of underground coal mines where the explosive mixtures of methane or coal-dust are present.
ExdIIAT4 - safe for use in plants where the explosive mixtures of IIA Class, TI, T2, T3 orT4 are present.
ExIIBT4 - safe for use in plants where the explosive mixtures of IIB Class, TI, T2, T3 orT4 are present.
ExdIICT4 - safe for use in plants where the explosive mixtures of IIC Class, TI, T2, T3 or T4 are present.
Based on series YB2 motors, the motors can also be manufactured for special environments, such as outdoor locations (YB2-W type), indoor tropical humidity (YB2-TH type), outdoortropical humidity (YB2-WTH type), indoor tropical arid (YB2-TA type), outdoor tropical arid (YB2-WTA type), indoor tropical (YB2-T type), outdoor tropical (YB2-WT type) and outdoormiddle-class-chemical corrosion locations (YB2-WF1 type).

Standard Lot Size , Weight , Dimensions

Electric motor

Wooden cage

Varm gear motor

Single phased universal motors

Single-phased universal motors are used for hair dryers, water heaters, coffee grinders, electric knives, egg mixers, juice extractors and other food processors. These motors possess high torque, low vibration and interference.

Gate motor

All kinds of the gate motor and barrier and its accessories

Export standard

Hood motor

Ac110-240c, 50/60hz, 2800 rpm, 50-250w, cl.B, f/h
It is widley used for cooker hood, range, fan blower..Etc.

20 pcs per caton with foam inside

Washing motor

8226;rated voltage: 220v
8226;rated power: 170w
8226;rated current: 1.68a
8226;rated speed: 1320rpm
8226;cososlash;: 0.92
8226;noise: _47db(a)
8226;capacitor: 12/450f/v
8226;pole: 4p
8226;e class insulation

Motor

Standard

Universal motor

Voltage: 240/50 v/hz
Output shaft rotation: c.C.W
Free load:
23.500 rpm
0.22 a
At max. Efficiency:
10.000 rpm
800 gm-cm
0.65 a
At max. Power:
6.000 rpm
1400 gm-cm
1.00 a
Rated load:
145 w
1.100 rpm
1.100 gm-cm
0.65 a
Screw: r.H

Shaded pole induction motor

Voltage: 240/50 v/hz
Output shaft rotation: c.W
Shaft diameter: 6.0
No. Of speed:
Free load rated load stop torque
High 9" fan
2850 rpm 1850 rpm
0.19 a 0.21 a 0.23 a
27 w 30 w
Low 9" fan
2820 rpm 1600 rpm
0.14 a 0.16 a 0.17 a
21 w 23 w

Capasitor motor

Voltage: 120/60 v/hz
No of speed: 3
On load fan:
Speed (rpm) +/- 100 a +/- 10% w +/- 10%
Hi 1250 0.30 35
Med 1150 0.25 30
Low 950 0.22 27
Stop torque: 0.36 a, 43 w
Fuse: 115 c
Cap: 2.0 mf

-