Product features
(1) with clutch to artificial put rope function;
(2) the brake and reliable;
(3) series machine;
(4) the whole steel less teeth difference star wheel reduction mechanism adapted to the weight load homework;
(5) elaborate product appearance design, make the products more beautiful and easy to install.
Product features
(1) with clutch to artificial put rope function;
(2) the brake and reliable;
(3) series machine;
(4) the whole steel less teeth difference star wheel reduction mechanism adapted to the weight load homework;
(5) elaborate product appearance design, make the products more beautiful and easy to install.
QJ-400 wire recycling machine
This machine with PCL control system,can recycling 99%copper from scrap copper wires/cables,the wire or cables' diameter should be below 20mm.
No packing
Mea.: L2700xW1900xH2300
Voltage:380V
Power: 16KW
Weight:1.2t output:150~200kg/h.
882 Electric Machines Equipments Suppliers
Short on time? Let Electric Machines Equipments sellers contact you.
918-600 integral type separator
This machine is specializing for the auto wires, communication wires and so on, and for the wiref+s not fit for stripper. All parts are design as integrity, it's convenience for ur using.
Size: w3500xw1900xh270
Voltage:380v
Weight:3t
Power:36kw
Daily capacity:3-4t.
Flameproof - weatherproof wellglass light fitting, 160w mll, with 2 nos. 3/4" et cable entry, mirror optic reflector, suitable for use in hazardous location in zone i & ii, gas group iia, iib. Ip-66, made with die cating, al. Alloy lm-6.
Uminum alloy. Aluminum cable steel reinforcing wires to produce the following power cables sector shaped conductors round compacted, single core presiralled.
Breel is arranged quartering around the cages. The centralized side loading system can increase efficiency much more.The equipment has high rigidity, high-powerd, and high speed.
CJX-450/9DT high-speed copper rod breakdown machine is used to draw + 8mm ordinary copper rod into + 2.0-3.5mm wire. The drawing capstans are arranged in a line that are able to work continuously with drawing speed, mechanical parts and electrical control matching each other. It is easy to operate, easy to change dies without pause and to change spools automatically. This machine has features of easy operation, high efficiency and good quality of product.
Machine type JCJX-B20
Control system Traditional analog type or
By computer digital control
Inverter control Dual Inverter control
Drawing dies No./Max. 20
Inlet diameter ª¦0.60��ª¦1.20mm
Outlet diameter ª¦0.10��ª¦0.50mm
Drawing line speed 800m/min
Slip ratio of m/c 15%
Fix speed capstan slip ratio 10%
Frame Welded by steel plate
Capstan Tungsten plasma capstan
Main motor 15KW
Spooler motor 3.7KW
Capstan dia. (Max.) ª¦200mm
Fix speed capstan dia. ª¦200mm
Spool bobbin size ª¦300mm or according to customers requirements
Send-out method Shaft type
Traversing unit synchronous motor +Belt
Transmission type By flat belts
Spooler control PID synchronous spooler
Detecting device Weight balance by swing arm
Tension control Weight balance type
Max. loading capacity 40KG
Lubrication type Water immersion type
Brake Magnetic brake
Power source 380V 50/60HZ
Lubricant oil capacity 40Liter/minute
Machine dimension (mm) 2000í-1300í-1050
Machine weight 2500KG
New and re box, as well as discontinued, refurbished, or stock parts, electronic and industrial automation control systems & equipment.Technical assistance and repair services
Splicing Type SM, MM, DS, NZDS
Splicing Loss 0.02dB(SM) 0.01dB(MM) 0.04dB(DS) 0.04dB(NZDS)
Return Loss >60dB
Splicing Mode Manual, Half Auto, Auto
Fiber Alignment Core to Core Alignment by PAS technology
Applicable Fiber Cable indoor and 0.25mm,0.9mm fiber, SOC connector(option)
Splicing Time 9s
Heat Time 30s Auto Heat
Cleaved Length 8-16mm
Fiber Image/ Magnification 300/150 times
View Display 4.3 inch digital high-quality LCD screen
Tension Test Standard 2N (option)
Heat Shrinkable Sleeve 60mm, 40mm and serials heat Shrinkable Sleeve
Battery Capacity 300 cycles splicing and heating, 3 hours charging time
( splicing and charging at same time)"
Battery Life Cycling charge 300-500 times, easy to replace battery
Electrodes Life 3000 splicing, easy to replace electrodes
Power Source 20W
Interface USB Convenient data download and software update
Construction Lighting Built in high brightness, wide range of lights, easy to operate at night
Power supply Built in lithium battery 5200mAh 11.1V; external adapter,
input: AC100-240V, output: DC13.5V/4.5A"
Operating Condition 0-5000m above sea level, Temperature: -10-60,
Humidity 0 95%RH (No dew)"
Weight 1.7 KG (including battery)
Dimension (LxWxH) 150mm(L) 135mm(W) 142mm(H)
The X. Y& Z axis utilize AC servo motor.
Auto-positioning and multi cavities machining.
Program function
The Circle Angle of Sparking is lower than 0.02mm
The best surface roughness (Ra) is better than 0.1 ;m.
High speed and long distance jumping.
Special Rib shape machining function.
