Find Verified Electric Insulators Suppliers, Manufacturers and Wholesalers

100% Brazilian Arabica Organic (Biodynamic) Gourmet Coffee.

The choice of an organic method, that has the endorsement of IBD (The Biodynamic Institute) gives this gourmet coffee a special flavor.
A flavor of purity: the fruit of a soll that receives no chemicals. Its harvesting is also a guarantee of what is the utmost in a coffee: it takes from the tree the ripe and red grains only, the "cherries", that are afterwards sundried and, once more, (electronically selected to arrive at a defect-free product).
These cares, added to a balanced blend of grains from the best Brazilian lands, makes of Cia. Organica a rare coffee and a delight for the taste buds.
The IBD is a certifier organization, internationally recognized acrredited by IFOAM (International Federation of Agriculture Movements) and DAR (Deutscher Akkreditierungs Rat).
Certificates: IBD - IFOAM - USDA Organic - RAT - JAS

CAF+ DO BRASIL " Ready to heal" your heart!

Feel free to contact us at any time!

Model FZK8810A QY-EWQ-01
Measurement Method Non-contact type
Power Supply Prompt for low battery charge DC 3V(2 AAA batteries)
Measuring Range 32-42.5 33~43.0
Electricity Prompt Prompt for low battery charge
Measure Distance 1cm-15cm 3~5cm
Fever Alarm Abnormal body temperature alarm 5 beeps in case of the
temperature is higher 38
Measuring Time Measurement time:0.6 second
Maximum Error ±0.2 0.2~0.3
Display Unit Centigrade()
Display Resolution 0.1 0.2~0.3
Automatic Shutdown 15 seconds 20 seconds
Operating Environment 10-40, Humidity 85%
Specification Size 7cm*5cm*19cm 15.5*8.77*4.4cm
Transportation And Storage Environment -20
-55,Humidity 85%

Model FZK8810A QY-EWQ-01
Measurement Method Non-contact type
Power Supply Prompt for low battery charge DC 3V(2 AAA batteries)
Measuring Range 32 42.5 33~43.0
Electricity Prompt Prompt for low battery charge
Measure Distance 1cm-15cm 3~5cm
Fever Alarm Abnormal body temperature alarm 5 beeps in case of the
temperature is higher 38
Measuring Time Measurement time:0.6 second
Maximum Error 0.2 0.2 ~0.3
Display Unit Centigrade( )
Display Resolution 0.1 0.2
Automatic Shutdown 15 seconds 20 seconds
Operating Environment 10 -40 , Humidity 85%
Specification Size 7cm*5cm*19cm 15.5*8.77*4.4cm
Transportation And Storage Environment -20 -55 ,Humidity 85%

sugar Description:

PRODUCT : Refined Suagr (ICUMSA - 100)

Specification
White Refined Cane sugar -
Polarization : 99.80% Min
Ash content : 0.04% Max
Suphateash Content : 00.04% Maximum
Moisture : 0.04% Max
Solubility : 100% dry Free Flowing
Radiation : Normal without Presence of Cesium or Iodine Certified
Granulation : Fine
Smell : Free of any Odor
Reducing Sugar : 0.05% Maximum by Weight
Fumigation : Well Cleaned from Molds, Unnatural Odors, Chemical and Insect

ICUMSA: >OR=100 ICUMSA and<150 ICUMSA as determined in sugar analysis
Crop : Current
SO2: 70MG/K
Radiation : Normal within internationally accepted limit
Moisture: 0.04% max by weight
Solubility : 100% dry free fine flowing
Polarization : 99.80% min
Granulation : fine standard
Ash by electrical : 0.04% max (on dry weight basis)
Smell : free or any smell
Reducing sugar: 0.05% max by weight
HPN Staph Aureus: nil
Max.AS : 1 PPM
Max.PS : 2 PPM
Substance : solid crystal

sugar Description:

PRODUCT : Refined Suagr (ICUMSA - 100)

Specification
White Refined Cane sugar -
Polarization : 99.80% Min
Ash content : 0.04% Max
Suphateash Content : 00.04% Maximum
Moisture : 0.04% Max
Solubility : 100% dry Free Flowing
Radiation : Normal without Presence of Cesium or Iodine Certified
Granulation : Fine
Smell : Free of any Odor
Reducing Sugar : 0.05% Maximum by Weight
Fumigation : Well Cleaned from Molds, Unnatural Odors, Chemical and Insect

ICUMSA: >OR=100 ICUMSA and<150 ICUMSA as determined in sugar analysis
Crop : Current
SO2: 70MG/K
Radiation : Normal within internationally accepted limit
Moisture: 0.04% max by weight
Solubility : 100% dry free fine flowing
Polarization : 99.80% min
Granulation : fine standard
Ash by electrical : 0.04% max (on dry weight basis)
Smell : free or any smell
Reducing sugar: 0.05% max by weight
HPN Staph Aureus: nil
Max.AS : 1 PPM
Max.PS : 2 PPM
Substance : solid crystal

sugar Description:

PRODUCT : Refined Suagr (ICUMSA - 100)

Specification
White Refined Cane sugar -
Polarization : 99.80% Min
Ash content : 0.04% Max
Suphateash Content : 00.04% Maximum
Moisture : 0.04% Max
Solubility : 100% dry Free Flowing
Radiation : Normal without Presence of Cesium or Iodine Certified
Granulation : Fine
Smell : Free of any Odor
Reducing Sugar : 0.05% Maximum by Weight
Fumigation : Well Cleaned from Molds, Unnatural Odors, Chemical and Insect

ICUMSA: >OR=100 ICUMSA and<150 ICUMSA as determined in sugar analysis
Crop : Current
SO2: 70MG/K
Radiation : Normal within internationally accepted limit
Moisture: 0.04% max by weight
Solubility : 100% dry free fine flowing
Polarization : 99.80% min
Granulation : fine standard
Ash by electrical : 0.04% max (on dry weight basis)
Smell : free or any smell
Reducing sugar: 0.05% max by weight
HPN Staph Aureus: nil
Max.AS : 1 PPM
Max.PS : 2 PPM
Substance : solid crystal

Zelio Relay. Base for mounting the RXM miniature relay or REXL time relay with 4-pole changeover contacts. Wiring is connected via separate terminal blocks. A protective module, label, and mounting bracket can be attached as optional extras.

About Meltblown Nonwove
Melt blown is a one step process to make fabrics from polymer.
The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided.
The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding.
The main purpose of melt blown fabric is to provide barrier property for the liquid.
Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form.
Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric.
Characteristics of Meltblown fabrics are:
The main desired characteristics expected for melt blown nonwoven fabrics are:
Adjustable Pores And Capillary Structure
Excellent barrier properties
Filament size 1 -3 �µm
High Elasticity
High Filtration capability
Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD).
Large Area-to-weight ratio
Self-bonding
The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2.
Very good thermal insulation for apparel application
Weak tensile properties
Wicking Properties

Application of spun-bond nonwoven fabrics:
Sanitary and Hygiene:
Sanitary napkins,
Baby diapers and
Incontinence diapers
Medical and Surgical:
Gowns,
Face masks,
Caps,
Drapes, etc
Other Miscellaneous Applications:
Filtration Material,
Agriculture,
Oilsorbents
Hot-melt adhesives
Headliners, etc

About Meltblown Nonwoven

Melt blown is a one step process to make fabrics from polymer.
The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided.
The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding.
The main purpose of melt blown fabric is to provide barrier property for the liquid.
Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form.
Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric.
Characteristics of Meltblown fabrics are:

The main desired characteristics expected for melt blown nonwoven fabrics are:

Adjustable Pores And Capillary Structure
Excellent barrier properties
Filament size 1 -3 �?�µm
High Elasticity
High Filtration capability
Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD).
Large Area-to-weight ratio
Self-bonding
The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2.
Very good thermal insulation for apparel application
Weak tensile properties
Wicking Properties


Application of spun-bond nonwoven fabrics:

Sanitary and Hygiene:
Sanitary napkins,
Baby diapers and
Incontinence diapers
Medical and Surgical:
Gowns,
Face masks,
Caps,
Drapes, etc
Other Miscellaneous Applications:
Filtration Material,
Agriculture,
Oilsorbents
Hot-melt adhesives
Headliners, etc

About Meltblown Nonwoven

Melt blown is a one step process to make fabrics from polymer.
The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided.
The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding.
The main purpose of melt blown fabric is to provide barrier property for the liquid.
Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form.
Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric.
Characteristics of Meltblown fabrics are:

The main desired characteristics expected for melt blown nonwoven fabrics are:

Adjustable Pores And Capillary Structure
Excellent barrier properties
Filament size 1 -3 �?�µm
High Elasticity
High Filtration capability
Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD).
Large Area-to-weight ratio
Self-bonding
The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2.
Very good thermal insulation for apparel application
Weak tensile properties
Wicking Properties


Application of spun-bond nonwoven fabrics:

Sanitary and Hygiene:
Sanitary napkins,
Baby diapers and
Incontinence diapers
Medical and Surgical:
Gowns,
Face masks,
Caps,
Drapes, etc
Other Miscellaneous Applications:
Filtration Material,
Agriculture,
Oilsorbents
Hot-melt adhesives
Headliners, etc

About Meltblown Nonwoven
â?¢ Melt blown is a one step process to make fabrics from polymer.
â?¢ The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided.
â?¢ The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding.
â?¢ The main purpose of melt blown fabric is to provide barrier property for the liquid.
â?¢ Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form.
â?¢ Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric.
Characteristics of Meltblown fabrics are:
The main desired characteristics expected for melt blown nonwoven fabrics are:
â?¢ Adjustable Pores And Capillary Structure
â?¢ Excellent barrier properties
â?¢ Filament size 1 -3 �µm
â?¢ High Elasticity
â?¢ High Filtration capability
â?¢ Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD).
â?¢ Large Area-to-weight ratio
â?¢ Self-bonding
â?¢ The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2.
â?¢ Very good thermal insulation for apparel application
â?¢ Weak tensile properties
â?¢ Wicking Properties

Application of spun-bond nonwoven fabrics:
â?¢ Sanitary and Hygiene:
â?¢ Sanitary napkins,
â?¢ Baby diapers and
â?¢ Incontinence diapers
â?¢ Medical and Surgical:
â?¢ Gowns,
â?¢ Face masks,
â?¢ Caps,
â?¢ Drapes, etc
â?¢ Other Miscellaneous Applications:
â?¢ Filtration Material,
â?¢ Agriculture,
â?¢ Oilsorbents
â?¢ Hot-melt adhesives
â?¢ Headliners, etc

This DC to AC inverter is designed for the backlight of 6.4-15.1" LCD Panel with single CCFL lamp
Input voltage: 12VDC
Kick-off Voltage: min1500
Lamp Voltage: 500V
Output Connector Mode: SM02B/ SM02 (8.0)*2
Transformer Qty: 2
Output Current: 6mA
Output Voltage: 500V
Frequency: 40 KHz
Dimmer: Yes
Dimension : 95.5mm*20mm*4.7mm.