Find Verified Electric Components Suppliers, Manufacturers and Wholesalers

Mainstream Value line, ARM Cortex-M3 MCU with 128 Kbytes Flash, 24 MHz CPU, motor control and CEC functions


Beijing Shouxi Zhixin Technology Co. LTD works on IC reverse analysis such as microcontroller decryption, chip crack, MCU attack, DSP reverse.

Mainstream Value line, ARM Cortex-M3 MCU with 64 Kbytes Flash, 24 MHz CPU, motor control and CEC functions

Beijing Shouxi Zhixin Technology Co. LTD works on IC reverse analysis such as microcontroller decryption, chip crack, MCU attack, DSP reverse.

Mainstream Value line, ARM Cortex-M3 MCU with 32 Kbytes Flash, 24 MHz CPU, motor control and CEC functions

Beijing Shouxi Zhixin Technology Co. LTD works on IC reverse analysis such as microcontroller decryption, chip crack, MCU attack, DSP reverse.

The NXP MC56F800x family of digital signal controllers (DSCs) offer the functionality of a microcontroller with a flexible set of peripherals. The entry-level MC56F8006 and MCF56F8002 DSCs provide the most cost-effective solutions for mathematically intensive, power-sensitive, real-time control applications.

Features
DSP and MCU functionality in a unified,C-efficient architecture with up to 32 MIPS at 32 MHz core frequency
64 KB (32K x 16) program Flash
8 KB (4K x 16) unified data/program RAM
Integrated Peripherials:
Controller area network (CAN)
One 6-channel pulse width modulation (PWM) module
Three programmable interval timers (PITs)
Up to 53 GPIO lines
Two up to 8-channel 12-bit analog-to-digital converters (ADCs)
Two 12-bit digital-to-analog converters (DACs)
This product is included in NXP’s product longevity program, with assured supply for a minimum of 10 years after launch

Features
DSP and MCU functionality in a unified, C-efficient architecture with up to 32 MIPS at 32 MHz core
32 KB of Flash memory
4 KB of RAM
Integrated peripherials:
One 6-channel PWM module
Two 12-bit up to 4-channels ADC
Two internal 12-bit DAC
Up to three PIT
QSCI
QSPI
I2C
Up to 35 GPIO
This product is included in NXP’s product longevity program, with assured supply for a minimum of 10 years after launch

MPPT solar charge controller with timer and battery type selection

Key Features
1)MPPT with conversion efficiency up to 99% under charging mode.
2)12V/24V/48V system auto recognize.
3)Controller with Intelligent design and free lifelong online upgrade service. 
4)LCD and LED show parameters and system information,like PV input voltage,battery voltage.
5)With intelligent design,the device can be upgraded online lifelong.
6)Nominal maximum solar/PV input is DC 150V .
7)Three Stages Charge mode: fast charge, constant charge, floating charge.
8) With high efficient MPPT operation scheme and adopting TI28035 chip.
9) Support kinds of batteries:Gel,Sealed lead acid,vented,NiCd,etc.
10)Extensible LAN remote control.
11)With CE, ROHS, FCC, PSE certifications. 
12)7 languages.
13)2 years warranty

About Raybaca Company

We are proud to provide you with the best quality in animal identification systems. As the producer of the qualifed ear tags for all livestock species we provide lifetime guaranty for all Raybaca Tags.
Products are bovine ear tags, ovine ear tags, HDX electronic ear tags, FDX electronic ear tags, applicators and collets, laser marking and ear tag pens.
The Raybaca Ear Tags are made of flexible, long durable material and are the best solution for a safe identification, printed with logos, numbers, letters and bar codes by our computerized lasers sytems. Tamperproff tag system combines any female or male piece to form a single unit of great strenght. our new system will be protected against forcible opening. Our ear tags' quality have benn approved
and accepted by the officials in many countries for identification. Raybaca also offers you the best product in our industry with the most reasonable prices and punctual shipment.Raybaca has supplied ear tags for offcial purposes for years and the production is certifed according to ISO 9001:2000 quality management system. Our products are approved bey the Standards Institution.

laptop TYPE AC ADAPTER(MOQ:50pcs)
input:100-240V
output:12V 10A 120W
Plug:Europe type
dc wire length:standard 1.2M
dc tip size:5.5*2.1MM





brown box+carton,L50*W42*H17CM

desktop TYPE AC ADAPTER(MOQ:100pcs)
input:100-240V
output:18V 3A 54W
ac cord:Europe power cord
dc wire length:standard 1.2M
dc tip size:5.5*2.1MM





L45*H37*17CM,50pcs/carton

Features
1Wide pass band
2Low Insertion Loss
3High Stability and reliability
4High Channel Isolation
5Epoxy-free on Optical Path
Applications
1WDM Network
2Line Monitoring
3Acess Network
4Cellular Application
5Fiber Optical amplifier
Parameter4 Channel8 Channel16 Channel
MuxDemuxMuxDemuxMuxDemux
Channel Wavelength (nm)1270~1610
Center wavelength Accuracy (nm)0.5
Channel Spacing (nm)20
Channel Passband (@-0.5dB bandwidth (nm)>13
Insertion Loss (dB)¨¹1.6¨¹2.5¨¹3.5
Channel Uniformity (dB)¨¹0.6¨¹1.0¨¹1.5
Channel Ripple (dB)0.3
Isolation (dB)AdjacentN/A>30N/A>30N/A>30
Non-adjacentN/A>40N/A>40N/A>40
Inertion Loss Temperature Sensitivity (dB)<0.005
Wavelength Temperature Shifting (nm)<0.002
Polarization Dependent Loss (dB)<0.1
Polarization Mode Dispersion(PS)<0.1
Directivity (dB)>50
Return Loss >45
Maximum Power Handling (mW)300
Opterating Temperature ()-5~+75
Storage Temperature ()-40~85
Package dimension (mm)1. L100 x W80 x H10 ( 2 CH8CH)
2. L140xW100xH15 (9 CH18CH))
Above specification are for device without connector.

1. L100 x W80 x H10 ( 2 CH8CH)
2. L140xW100xH15 (9 CH18CH))

Flyin Optronics offers a full range of Thermal/Athermal AWG products, including 50GHz, 100GHz and 200GHz Thermal/Athermal AWG. Here we present the generic specification for the 40-channel 100GHz Flat Top Thermal AWG (40 channel TAWG) MUX/DEMUX component supplied for use in DWDM system.



Standard package

Athermal AWG(AAWG) have equivalent performance to standard Thermal AWG(TAWG) but require no electrical power for stabilization. They can be used as direct replacements for Thin Film Filters(Filter type DWDM module) for cases where no power is available, also suitable for outdoor applications over -30 to +70 degree in access networks. Flyin Athermal AWG(AAWG) provide excellent optical performance, high reliability, ease of fiber handling and power saving solution in a compact package. Different input and output fibers, such as SM fibers, MM fibers and PM fiber can be selected to meet different applications. We can just offer rackmount package for 50G AWG products.



standard package

Flyin optronics' micro-optical wdm utilizes thin film coating technology and proprietary design of non-flux metal bonding micro optics packaging. It provides low insertion loss, high channel isolation, low temperature sensitivity and epoxy free optical path.

Features
L wide operating wavelength range
L low insertion loss
L ultra flat wide passband
L high channel isolation
L high stability and reliability
L epoxy-free on optical path

Applications
L testing instruments
L ftth tri-play system



Standard package

Flyin Optronics' MMWDM utilizes thin film coating technology and proprietary design of non-flux metal bonding micro optics packaging. It provides low insertion loss, high channel isolation, low temperature sensitivity and epoxy free optical path.

Features
l Wide Operating Wavelength Range
l Low inertion loss
l Ultra Flat Wide Passband
l High Channel Isolation
l High stability and reliability
l Epoxy-free on Optical Path

Applications
l System Monitoring
l WDM Network
l Transmitters and Fiber lasers
l Fiber Optical amplifier
l Fiberoptic Instruments


standard package

Besides providing various metallic electrical devices, we are also specializing in the manufacture and export of wide range of plastic accessories that are used as electrical fittings. Available in different dimensions, the range can also be customized to suit the specific requirements of the clients.

Our products range:

Circular boxes
Couplers
Female adaptor with bush
Normal Bend, Extn. Ring
Circular/Square/Rectangle lids
Flexible adaptors
Trunking/Slotted ducts
Adaptable boxes
Encloser

Product Description
we utilize the ultra-precision machine tool of Switzerland to machine bar tungsten substrates.The circular arc at the positions of angles of the substrate is smaller than 15 um.
Product Feature
The tungsten base materials are not added with any lubricating agents or sintering addtives the production process so that the size precision and the thermal stability of our products can be ensured.The tungsten base material is in perfectly matched with the coefficient of the linear expansion and overcomes the effect of smile.
Product Specification/Models
90W/10Cu, 85W/15Cu, 80W/20Cu, 85Mo/15Cu
Application
laser equipment components,scientific research etc


sealed package

Yusheng's ball mill spare parts is designed together with the machine to ensure the best possible crushing performance. Absolutely correct dimensions and solid casting quality protect your crusher from overload danger.

Export standard ball mill spare parts

1

Agni /cu bimetal contact rivet: in low voltage engineering, this contact is widely used in ac switches & contactors as an electrical contact.

Inner package: vaccum plastic bag; outside package:carton 28cmx14cmx22cm