Find Verified Industrial Sugar Suppliers, Manufacturers and Wholesalers

Trouser

Back and side pockets, leg pocket with mobile pocket at left side, ruler pocket at right side, normal waist closed with plastic button.

Sizes 38 - 72

65% polyester/35% cotton, 245 g/m2
For fabric: Oeko-Tex Standard 100
With HF-chip

Industrial Wear Jacket

Jacket
Chest pockets closed with flaps, side pockets, pen pocket at left sleeve, stretch fabric in arm-holes, front closed with zipper, waist adjustable with straps, stand up collar.

Sizes XS â?? 6XL

65% polyester/35% cotton, 245 g/m2
For fabric: Oeko-Tex Standard 100

Trouser with tool pockets

Side- and back pockets, reinforced tool- and knee pockets and hem, leg pocket at left side with mobile pocket and closed with zipper, ruler pocket with knife holder at right side, hammer loops on both sides, normal waist closed with jeans button and zipper, reflective bands and yellow visability fabric at lower part of leg.

Sizes 38 -72

100% cotton, 370 g/m2

For fabric: Oeko-Tex Standard 100

Trouser with tool pockets

Side- and back pockets, reinforced tool- and knee pockets and hem, leg pocket at left side with mobile pocket and closed with zipper, ruler pocket with knife holder at right side, hammer loops on both sides, normal waist closed with jeans button and zipper.

Sizes 38 - 72

100% cotton, 370 g/m2
For fabric: Oeko-Tex Standard 100

Trouser with knee pockets

Back, side and knee pockets, leg pocket with mobile pocket at left side, ruler pocket at right side, normal waist, closed with plastic
button and zipper.

Sizes 38 -72

65% polyester/35% cotton, 245 g/m2
For fabric: Oeko-Tex Standard 100

Shirt with long sleeve

Closure with metal ring fasteners, button down collar, 2 chest pockets with place for pen, closed
with metal ring fasteners.

Sizes XS - 6XL

65% polyester/
35% cotton, 210 g/m2
For fabric:
Oeko-Tex Standard 100

Trouser with knee pockets

Back- and side pockets, reinforced hem and knees with inside kneepockets, leg pocket closed with flap and with mobile
pocket on left side, ruler pocket at right side, waist closed with plastic button and zipper in fly.

Sizes 38 - 72

65% polyester/35% cotton, 245 g/m2
For fabric: Oeko-Tex Standard 100

Bib & brace

Chest pocket and inner pocket. Pocket and opening in sides. D-ring for keyholder in right side pocket. Back pockets with
a yoke as flap. Leg pocket with outside mobile pocket. Ruler pocket with pen pocket. Reinforcement material on knees
and the bottom of legs. Preshaped knees and inside kneepockets.

Braces with elastic at back for improved comfort.

Sizes XS â?? 6XL
65% polyester/35% cotton, 245 g/m2
For fabric: Oeko-Tex Standard 100

T-shirt

T-shirt with an inside neck plate for labelling. Contrast side panels.

Sizes XS â?? 6XL

50% cotton/50% polyester, 240 g/m2
For fabric:
Oeko-Tex Standard 100

We can connect you with our friend end sellers to offer express work with Brazilian Sugar Icumsa-45, where they can provide reliable and serious offers.

Please, contact us only if you are the end buyer/seller or his direct mandate.

Refined Sugar Icumsa-45, Origin: Brazil, Packing: 50 kg bags, Payment Release against shipping documents at loading port or at destination port. Payment methods: (Cash deals, Escrow account, SBLC transferable or non-transferable, DLC / LC, Block fund in buyer's account In favor of the seller) Performance Bond: 2%.

Silica Sand - Industrial & Construction Grade
Product Detailed Description by Trade Rock for Trading and Mining
Product Name:
Silica Sand - Industrial & Construction Grade
Origin: Egypt
Producer & Exporter:
Trade Rock for Trading and Mining
Product Description:
Our high-purity silica sand is composed predominantly of silicon dioxide (SiO2), with minimal impurities. It is
processed and washed to meet strict industrial and construction standards, delivering consistency, durability,
and optimal performance across applications.
Key Specifications:
- SiO2 Content: â?¤ 98.0%
- Fe2O3: <= 0.05%
- Moisture: <= 0.5%
- Bulk Density: 1.55-1.65 g/cm�³
- Mohs Hardness: ~7
- Grain Size Range:
* 20-40 mesh (0.84-0.42 mm)
* 40-70 mesh (0.42-0.21 mm)
* Custom gradings available on request
- Color: White to off-white
- Form: Washed, dried, and free-flowing
- Packaging: 25 kg, 50 kg woven sacks or bulk (Big Bags / bulk trucks / ISO containers)
Applications:
- Glass Manufacturing
- Foundry
- Construction & Refractory
- Water & Wastewater Filtration
- Abrasives & Sandblasting
- Oil & Gas Industry
- Ceramics & Paints
Competitive Advantages:
- High Purity & Low Impurities
- Controlled Particle Size
- Washed & Dried Product
- Custom Gradations
- Inspection-Ready
- Support & Logistics
Logistics & Delivery:
- FOB Port: Alexandria or Damietta, Egypt
- Minimum Order Quantity: 500 MT
- Monthly Production Capacity: Up to 20,000 MT
- Delivery Time: 10-25 days depending on volume and port
Compliance & Certification:
- ISO 9001:2015 Certified
- SGS/Intertek inspection available
- Complies with ASTM, AFS, ISO and global standards
Storage & Handling:
- Store in dry, sheltered environments
- Use standard bulk handling procedures
- Non-toxic, safe, non-flammable

Calcium Carbonate is a versatile mineral compound widely used across industrial, construction, agricultural, plastic, rubber, paint, paper, and chemical applications. Available as natural or precipitated calcium carbonate, it can be supplied in different grades, particle sizes, and purity levels according to buyer requirements. High-purity calcium carbonate offers excellent whiteness, controlled particle size, and good dispersion properties. It is commonly used as a filler, coating material, pH regulator, and calcium source. The product can be supplied in fine powder, granular, or customized forms, with specifications tailored for industrial processing and international B2B requirements.

Key Specifications
Specification Typical Value
Chemical Name Calcium Carbonate
CAS Number 471-34-1
Purity 90 - 99.5%+
Appearance White or off-white powder
Particle Size 200 - 2500 mesh, customizable
Calcium Content Typically 35 - 39%
Moisture Less Than 0.5 - 2%
Whiteness 85 - 98%+
Type Ground Calcium Carbonate (GCC) / PCC
Solubility Insoluble in water
Origin Natural mineral / processed

Raw Salt is naturally harvested salt obtained from seawater evaporation, salt pans, or underground deposits with minimal processing. It primarily consists of sodium chloride along with naturally occurring minerals and varying levels of moisture and insoluble matter. Depending on its source and intended use, raw salt can be supplied in coarse, medium, or granular forms. It is commonly used as a feedstock for salt refining, chemical manufacturing, water treatment, textile processing, leather processing, and other industrial applications. Raw salt offers an economical source of sodium chloride for bulk processing operations and can be further washed, dried, screened, refined, or processed according to specific industrial requirements and customer specifications.

Key Specifications
Parameter Typical Specification
Product Type Raw / Unrefined Salt
Main Component Sodium Chloride (NaCl)
NaCl Content Typically 90 - 98%
Appearance White / Greyish / Off-White Crystals
Grain Size Coarse / Medium / Granular
Moisture Typically 1 - 10%
Insoluble Matter Source dependent
Origin Sea Salt / Rock Salt
Processing Minimally Processed
Grade Industrial / Processing Grade

Textile Dyeing Industrial Salt is high-quality sodium chloride used as a processing aid in reactive and other dyeing operations. It helps promote the controlled absorption and fixation of dyes onto textile fibers, particularly cotton and other cellulosic materials. Properly processed salt with high sodium chloride content and low levels of insoluble matter supports consistent dye uptake, shade development, and color uniformity. Available in fine, medium, and coarse crystal sizes, it can be selected according to the dyeing process and equipment requirements. Textile-grade industrial salt is widely used in cotton, denim, yarn, fabric, and garment dyeing operations, helping manufacturers achieve repeatable processing performance and efficient dye utilization.

Key Specifications
Parameter Typical Specification
Product Type Textile & Dyeing Industrial Salt
Main Component Sodium Chloride (NaCl)
NaCl Purity Typically 98 - 99.5%+
Appearance White Crystalline Granules
Moisture Typically Less than 1 - 3%
Particle Size Fine / Medium / Coarse
Insoluble Matter Low
Solubility High
Grade Industrial / Textile Grade
Additives As specified by buyer

Washed Salt is a refined form of natural salt produced by washing raw salt crystals to remove clay, sand, insoluble impurities, and other unwanted materials. The washing process improves purity, cleanliness, appearance, and consistency while retaining sodium chloride as the primary component. Depending on the intended application, washed salt can be supplied in different grain sizes and purity levels, including industrial and food-grade specifications. It is widely used in chemical manufacturing, water treatment, textile processing, leather processing, food production, de-icing, and other industrial applications. Properly processed washed salt offers consistent quality, good solubility, controlled moisture, and reliable performance for bulk commercial and manufacturing requirements.

Key Specifications
Parameter Typical Specification
Product Type Washed Salt
Main Component Sodium Chloride (NaCl)
NaCl Purity Typically 97 - 99.5%+
Appearance White / Off-White Crystalline Granules
Moisture Typically Less Than 1 - 3%, grade dependent
Grain Size Fine / Medium / Coarse
Insoluble Matter Low, grade dependent
Solubility High in water
Origin Solar / Rock Salt, depending on source
Grade Industrial / Food Grade, as applicable

Trouser with tool pockets

Back-, tool- and side pockets, reinforced knee pockets and hem, leg pocket closed with flap and with mobile pocket at left side, ruler pocket with knife holder at right side, waist closed with 2 plastic buttons and zipper in fly.

Sizes 38 - 72

65% polyester/35% cotton, 245 g/m2
For fabric: Oeko-Tex Standard 100

Beet Pulp is the vegetable matter, which remains after sugar is extracted from sliced sugar beets. This vegetable matter is then made into pellets to improve its nutritional value and handling characteristics. It is high in fiber and unique in that its fiber is extremely digestible
Sugar beet pulp can be exported with variable specifications and pellet sizes as per customers requests. Egyptian season starts in February and ends in July, but GS can export all year long due to our large storage facilities and warehousing tactics. Having a highly trained logistic team allows us to load 10-20 FCLs on daily basis.

PACKING
Bulk in 40 containers
Bulk in conventional vessels
Packed in 50 KGS bags in 40 containers
Packed in 1-ton jumbo bags in 40' Ft containers

Typical Analysis
Crude Protein 9.0%
Crude Fat 0.5-0.6%
Crude Fiber 15.0-20.0%
Ash 4.0-5.0%
Moisture 8.0-12.0%
TDN 74.0%
NEL 0.81 Mcal/lbs.
Calcium 0.6%
Phosphorus 0.1%
Pellets size 9 to 11mm
Free from molasses

Phosphoric Acid

Chemical formula / structure : H3PO4

Description : Ortho Phosphoric Acid is a clear, colourless liquid.

Applications :
Pre-treatment chemicals for metal surfaces
Metal anodising
Sugar refining
De-gumming of vegetable oils
Manufacture of industrial phosphates
Aromatic Chemicals
Sugar Industries

We are producing Calcined Lime Lumps from the popular high-grade limestone of Egypt.Calcined Lime Lumps, offered by us, are obtained by calcination of (controlled heating-time and temperature) limestone at temperatures above 900C.
The CaO% ranges from 80%-95% up to client request and the industry.

Chemical Name : Calcium Oxide

Chemical Formula : CaO

Major Applications :
-Steel industry
-Sugar industry
-Paper industry
-Aluminium refineries
-Water treatment plants
-Lather and Textile industry
-Paint industry
-ETP plants
-Fly Ash bricks
-Construction industry

Packaging : 50 kg bags/1000 kgs bags

Calcined Lime Lumps Are Available In Different Sizes And Forms :
Mesh Size : 100/325
Lumps size : 15mm to 35 mm

Product description:

Calcium oxide or quick lime is widely used versatile chemical compound, made from excellent deposit of high calcium limestone. High calcium lime is used for acid neutralization, flue gas treatment, as flux in metallurgical industry, in sugar refining etc.