Find Verified Heavy Aromatic Solvent Suppliers, Manufacturers and Wholesalers

Dimensions:
Width: Up to 1500mm
Length: Up to 50 m.
Thickness: 1.5 - 50 mm.
General Description:
EPDM rubber (ethylene propylene diene monomer rubber) is an elastomer that is characterized by wide range of applications and good chemical resistance.

Features:
Chloramine resistant
Good heat and compression resistance.
Resistant to ketones, hot and cold water, steam, alkalis, polar solvents,ozone, sunlight, alcohols, glycol engine coolant and Skydrol (phosphate ester hydraulic fluid).
Resistant for air conditions.
Applications:
Automotive: Weather stripping and seals.
Wire and cable harnesses.
Window spacers.
Hydraulic brake systems.
Door, window and trunk seals

Roofing: Roof membrane.
Roof coating.
RV roof.
Industrial: Water system O-rings and hoses.
Tubing, grommets, and belts.
Electrical insulations and stinger covers.

Dimensions:
15 mm *50*50 cm W:4.5 : 4.75 Kg/Tile
10 mm *120*120 cm W: 16:18 Kg/Tile
Advantage of this Tile:
- Excellent slip resistance, water resistance,
- Resistance to heavy impact loads, sound absorbent.
Indoor flooring:
Does not react to weather conditions.
- It has no negative effect on children if directly touched according to our
customer feedbacks.
- Endurance is more than 2 tons per square meter.
Way of installment:
- Most cases don't require adhesives as it is heavy tied to Each other in a
puzzle way which makes it hard to move away.
- If it is needed any rubber adhesive or polyurethane is used on a plain
surface
Applications: It is used in kidsâ?? areas and schools.
Material: SBR Rubber mixed with PU Binder.
Color :
- Black
- Grey
- Green
- Blue
- Red
Life span: 5:10 years - according to the use

Description:
ESD Rubber Mats consist of a top layer static dissipative rubber laminated to a bottom layer of
conductive rubber. The synthetic rubber work surface offers excellent resistance to oil, grease, and
most common solvents. They are heat and solder resistant, will not delaminate, and are easy to clean.
Applications:
Computer Operators, Electronic Assembly, and Manufacturing, Pharmaceutical Plants,
Cleanroom Operation, Fiber Optics, Aerospace, and Hospitals. To be used in work surface
applications.

Construction : Static dissipative synthetic rubber laminated to a bottom layer of conductive rubber.
Chemical Resistance :
They are resistant to degradation by inorganic acids, organic acids, reducing agents, detergent
solutions, alcohols, aliphatic hydrocarbons, mineral oil, amines, and aldehydes.

Dimensions:
15*120*120 mm W: 31: 33 Kg / Tile
20*120*120 mm W: 34:36 Kg / Tile
Advantage of this tile:
- Excellent slip resistance, water resistance,
- Resistance to heavy impact loads, sound absorbent.
Indoor flooring:
- Does not react to weather conditions.
- It has no negative effect on children if directly touched according to our
customer feedbacks.
- Endurance is more than 2 tons per square meter.
Way of installment:
- Most cases donâ??t require adhesives as it is heavy tied to Each other in a
puzzle way which makes it hard to move away.
- If it is needed any rubber adhesive or polyurethane is used on a plain
surface
Applications: It is used for indoor gym and sport halls as Shock absorbers and safety flooring.
Material: SBR Rubber mixed with PU Binder.

Color :
- Black
- Grey
- Green
- Blue
- Red
Life span: 5:10 years - according to the use.

Size:
- 200x160x25mm

Features:
- Excellent slip resistance, water resistance,
- Resistance to heavy impact loads.
- Does not react to weather conditions.
- It has no negative effect on children if directly touched.
- Easy to install over a concrete base area.
- Springy and comfortable underfoot.
- Its interlocking design can installed without adhesive in mild traffic areas, has good
stability and can be expanded indefinitely and covering large areas.

Application:
- Excellent slip resistance, water resistance,
- Resistance to heavy impact loads.
- Does not react to weather condiotins.
- It has no negative effect on children if directly touched.
- Easy to install over a concrete base area.
- Springy and comfortable underfoot.
- Its interlocking design can installed without adhesive in mild traffic areas, has good
stability and can be expanded indefinitely and covering large areas.
- Entryways kidsâ?? area, Walks and Driveways.
- Horse barn, corridors, wash bays saddling areas, paddock areas, path.
- Balcony, courtyard, platform bridge, patio, garage, home use.
- Gym, fitness center, sport center, stud-farm.
Material:
- Top layer from 7mm colored SBR + 20 % EPDM granules
- Bottom layer from 18mm black SBR.
Color:
- Bottom layer Black color.
- Top layer Red & Green & Blue and Grey color.
Life span: - 5:10 years - according to the use.

Size:
- Length*Width: 150*150 cm.
- Thickness: 12mm
Advantage of this Tille:
- Excellent slip resistance, water resistance,
- Resistance to heavy impact loads, sound absorbent.

Indoor flooring:
- Does not react to weather conditions.
- It has no negative effect on children if directly touched according to our customer feedbacks.
- Endurance is more than 2 tons per square meter.
Color: Black.

Applications:
- It is used in sport halls and locations that need Shock absorbers and safety flooring.
- It is used in kidsâ?? areas and schools.

Material: SBR Rubber mixed with PU Binder

Life span: 5:10 years - according to the use

Tiles:
Dimensions:
120*120*2 cm. Others dimensions according to the customer requirements.

Features:
- Cow Stall Mat can cover large areas, reduce the damage to the trays floore, relax the
animal's muscles
- Designed to withstand heavy-duty wear and tear.
- Easy to clean and install
- Insulates against cold and damp.
- Non-slip surface.

Physical Specification:
- Tensile (N/m2) min. : 4.96 .
- Elongation at break(%) min. : 215.45.
- Hardness (Shore A): 68.51.
- Corrosion (Decrease in Volume) (mm3): 149.96.
- Impact ( 50KG from 1 m height): Passed with no change.
- Weight (Kg): 36-34

Material: SBR Rubber.
Application: Agriculture & Equine, Dairy Farming
Colors: Black, Grey, Red, Green, Blue.

Rolls:
Dimensions:
200*100*1 cm
150*100*1.5 cm
1.4*90*1.5 cm
70*40 cm

Material: SBR Rubber
Color : Black

Dimensions:
Width: 300*400 & 350*450 & 250*400 & 600*700 mm According to loads and customer needs.
Height: 8 - 200 mm
According to loads and customer needs.

Types:
- Type (C2): laminated bearing with elastomer comprising steel reinforcing plates in layers and with
smooth steel plates in top and bottom.
- Type (C4): laminated bearing with elastomer comprising steel reinforcing plates in layers and with
shaped steel plates in top and bottom.
- Type (B): laminated bearing fully covered with elastomer comprising steel reinforcing plates.
- Type (F): Plain Pad bearing, Block from Neoprene Rubber

Description:
Neoprene Bearing Rubber Pads provide a uniform transfer of load from beam to structure. They permit
rotation at the bearing point due to deflection or misalignment. They absorb vibration and prevent sound
transfer, while reducing the destructive action of vibration between movable and stationary members.
They also provide for movement caused by normal expansion and contraction.
Meets Standard Specifications for Highway Bridges, Fourteenth Edition 1989, Division II, Section 25-
Elastomeric Bearings, and EN13373-, and AASHTO Standard Specifications for Transportation Materials
and Methods of Sampling and Testing, Seventeenth Edition, M251.
Neoprene Bearing Pads are used extensively in bridge structures and prestressed and precast concrete
buildings. Also used in industrial machinery and heavy equipment applications