Find Verified Educational Software Suppliers, Manufacturers and Wholesalers

Introduction:

The automatic pick and place machine TP210+ is a desk type high speed pick n place machine. It is a cost-effective SMD mounter.
The TP210+ can mount 0603, 0805, 1206 and many more. It can fabricate SOPs and SOICs (size under 15*15mm, PIN foot less than 24) as well.
TP210+ equips 22 pcs of 8 feeders (electric feeder of 8mm, 12mm, 16mm,24mm can be chosen). The Z-axis can route freely and can meet requirements of various angle component.

Main parts:

1. Step motor with a function to change the angle: able to mount 45°, 90°,180° angle component.

2. Dual Parallel square-type wide guide rail. Compared with a balling guide rail, the guide rail has a small space to ensure a high accuracy.

3. Visual + machinery position system: The camera nearby mounting head can magnifying through a '+' cursor to ensure an accurate mark point position.

4. No-contact flying centering system: Flying centering system can mount a variety of SMD components including: 0603, 0805,1206, many more and SOPs, SOICs with a size under 15*15mm, PIN foot less than 24.

5. Flexible reference point system (RPS): In addition to the standard round reference point, also a square formed and ring formed point with a hole also can be identified as a reference point.

6. All-purpose automatic feeder: 22 pcs of automatic feeder can be chosen. 8mm, 12mm, 16mm, 24mm can be installed according to your component and required speed.
　　
7. It is using a unique air suspended pick and place head design, which can transmit several kinds of large and small component.

8. Protel file of component data import: Software control, limitless data file can be saved in PC, you can call them at any time when needed, easy to operate.

Technical Parameter:

Type: TP210+

Max PCB size: 300x200mm

Max moving range: 400×460mm

Max moving range of Z-axis: 10mm

Typical pick&place speed: 2.600-3.000cph

Max pick & place accuracy: ± 0.014mm

Repeat accuracy: ±0.05mm

Positioning: Visual and machinery positioning

Component Available: 0603, 0805, 1206 etc and SOPs, SOICs (size under 15x15mm, PIN foot less than 24)

Programing method: Software program input

Driving mode: uses industrial synchronous belt

Automatic Feeder: 8mm,12mm,16mm,24mm feeder can be chosen.

Number of feeders: 22 pcs of 8mm feeders

Number of IC Plate: More than 2

Operating system: WINDOWS XP

Air pressure: 80psi(0.5Mpa)

Power supply: 220V,50Hz

Weight: 95kg

Dimension: 980×1000×590mm

Here is the Asus ROG Zephyrus S GX701 configuration sent to TechRadar for review:

CPU: 2.2GHz Intel Core i7-8750H (hexa-core, 9MB cache, up to 4.1GHz)
Graphics: Nvidia GeForce RTX 2080 Max-Q (8GB GDDR6 VRAM); Intel UHD Graphics 630
RAM: 24GB DDR4 (2,666MHz)
Screen: 17.3-inch, Full HD (1,920x1,080) IPS, Pantone Validated (144Hz refresh rate with Nvidia G-Sync)
Storage: 1TB M.2 PCIe x4 SSD
Ports: 2 x USB 3.1 (USB Type-C), 3 x USB 3.0, 1 x HDMI 2.0b, headset jack
Connectivity: 802.11ac Wi-Fi, Bluetooth 5.0
Camera: Full HD webcam (1080p, 60fps)
Weight: 5.95 pounds (2.7kg)
Size: 15.7 x 10.7 x 0.7 inches (39.9 x 27.2 x 1.87cm; W x D x H)

Product Description:

The automatic pick and place machine TP400V-II is a cost-effective equipment in the SMT industry. It is able to fabricate a variety of components by the integrated vacuum nozzle. The machine can mount SMD chip components above 0402, SOICs, PLCCs, QFP and ICs. The Vision System is compatable with QFP ICs with a pitch of 0.5mm. Beside the round reference, also square square formed and ring hole pads can be recognized as mark point.

Features:

1. Automatic Mount by control of software.
2. Quick PROTEL data import or manual input.
3. Visual + machinery positioning.
4. Visual programming system can identify the reference point automatically to improve the production efficiency and accuracy.
5. The visual programming system can produce X, Y coordinates of all components automatically after confirmed the basic reference points and to complete the mounting process.
6. Unique optical prism and high-definition industrial cameras for placing high-precision components.
7. Equipped with a high-precision quadrate guide rail and smooth gliding arm for improving mounting accuracy.
8. Air suspended head for pick- and place-process.
9. Automatic nozzle replacement system.

Optional:

1. Automatic feeder
2. IC disc
3. Automatic PCB transmission system

Main parts:

1. DC servo motor driving system:
It uses loop DC servo motor driving system for a high precision repeating accuracy and stability.
2. Vision centering system: Vision centering system can mount 0.5mm pitch QFP ICs.
3. No-contact flying centering system: Flying centering system can mount most of SMD components including: 0402, SOICs，PLCCs & QFP ICs.
4. Flexible reference point system (RPS): In addition to the standard round reference point, also a square formed and ring formed PCB pad with a whole can be identified as a reference point.
5. All-purpose automatic feeder: The TP400V-II has 8mm, 12mm, 16mm, 24mm feeders which you can choose to install.
6. Flexible tray-type station: The TP400V can equip 2 trays which helps to mount bulk components under the semi-auto mode.
7. CAD/ Protel data transfer: Besides studying the component coordinate by Camera or keyboard input, you can choose the CAD transfer software WCAD to transfer the PCB’s CAD into pick and place data.
8. Buffering nozzle: Buffering nozzle can adjust the pressure automatically according to different components height to avoid damage due to different component heights or programming errors. It is suitable for various types of pick and place ceramic components and ceramic circuit boards.

Technical Parameter:

Type: TP400V-II (V: industrial camera at bottom)

Max printing size: 400×350mm

Max moving range: 400×630mm

Z axis max moving range: 70mm

Typical mounting speed: 2000-2800cph

Max mounting speed: 3500cph

Mounting accuracy: ±0.05mm

Component available: SMD components > 0402 and SOICs、PLCCs、QFP ICs < 38mm

Positioning method: Visual positioning

Programming method: Video study/ keyboards input/ data import

Driving way: Y-axis uses industrial synchronous belt drive, X-axis uses imported high precision lead screw.

Automatic Feeder: 8mm, 12mm, 16mm, 24mm feeder

Feeder Number: 1. Place 72 pieces of 8MM feeder CFTA-08S, 36 pieces at the front and back side.
2. Place 60 pieces of 8MM feeder GFTA-08S, 30 pieces at the front and back side.

PCB board input system: Automatic (Standard configuration)

Automatic Nozzle changing system: Automatic (Standard configuration)

IC tray number: 2

Operation system: WINDOWS XP

Compressed air: 80psi (0.5Mpa)

Power supply: 220V, 50Hz, 3kw

Weight: 310kg

Dimension: 1280×1410×750mm