Heavy duty 'kirti' brand lathe machine. Sizes available in 5.6 ft, 7 ft, 9 ft, 10 ft, 12 ft upto 14 ft. V belt, cone pulley with taper roller bearings with flame hardened bedways.
Drilling rig specifications - 2000hp
Draw works:
Gardner denver 1500e, 2000 hp, rated to 20, 000' with 5" drill pipe
Power:
(2) ge752 traction motors, 1000 hp each
Mast and substructure:
Branham 156µx 28µ cantilever 1, 000, 000 shl, sub- universal 25µx 38µx 52µ6÷ w/ 1, 000k csg. & 600k setback cap
Pump #1:
New gd pz11, 1600 triplex pump
Power: 2-ge752 traction motors, 1000 hp each
Stand by pump:
Gd pz11, 1600 triplex pump
Power: 2-ge752 traction motors, 1000 hp each
Rotating and traveling equipment:
National c275, 27-1/2÷, rotary table
National p500 swivel, 500 ton
Gardner denver 55 t-660 block, 550 ton / bj 5500 hook, 550 ton
B.O.P. Equipment:
Hydril gl, 13-5/8÷, 5000 psi, annular bop
Hydril single ram #10, 000
Hydril double ram #10, 000
Cameron 4-1/16÷x 4-1/16÷, 10m psi choke manifold
Koomey, type 80, 7-station, 240 gallon accumulator w/remote panel
Generators and scr house:
3-cat 3512b w/ 1204 kw kato generators, ross hill model 1400 scr system, with 4 scr converters and 3 generator cubicles
Mud systems:
1500 barrel 3-pit system with mud agitators
(3) derrick 503 high g linear shale shakers
Derrick 20 cone desilter, derrick 3 cone desander, derrick degasser
Drill pipe and drill collars:
19, 000 feet of 5÷ 19.60 g & s grades drill pipe
21-7÷ drill collars with 5÷ h-90 connections
6 - 8÷ drill collars available upon request
Terms of sale:
Equipment inspection:
Any site inspection must have prior approval by the seller. All prospective buyers need to submit their intent to inspect via written request/letter or email. Seller may request that buyer show proof of ability of funding through letter of credit and/or banking credentials.
Sl80
Jack hammer
The pneumatic pick is suitable for drilling in concrete and clay, destorying hard or frozen stratum and other functions. It has characteristic of reasonable structure, high efficiency and handy use .
Specification
Weight 37kg
Length 733mm
Rammer dia 57mm
Rammer stroke 189mm
Air pressure 0.63mpa
Impact frequency 18.3hz
Air consumption 34l/s
Air pipe inner dia 19mm
Lubrication capacity 30ml
The rock drill is mainly used in samll quarries, small coal mines and limestone mines for drilling, blasting for constructing roads in mountain areas, alsoz in the capital construction for water conservancy works.It is suitable for drilling works in large mines for boulder blasting and other projects as well.
Specification
Weight 19kg
Outside dimensions(l-w-h) 600-534-157mm
Cylinder dia 65mm
Piston stroke 54mm
Air pressure 0.4~0.5mpa
Air pipe inner dia 19mm
Water pipe inner dia 13mm
Shank dimension 22-108mm
When working pressure is 0.4mpa 0.5mpa
Impact energy28j40 j
Impact frequency28hz35 hz
Idling speed180 r/min200 r/min
Air consumption _37 l/s _43 l/s
5769 Drilling Machines Tools Suppliers
Short on time? Let Drilling Machines Tools sellers contact you.
The rock drill is a kind of high efficiency air leg rock drill machinery.
It is mainly used for blasting holes and other drilling works in a
Quarries, railway construction, water conservancy construction and
Defence project facility.
It is suitable for drilling and blasting under various of rocks at
Any direction angles.Blast hole dia is 34-42mm, drill hole depth is 5 m.
This machine may match with model ft160bd short air leg or model
Ft160bc long air leg.
This machine has transparent surface of fy200b oil reservoir to
Regulate oil.
Specification
Weight + 26 kg
Length 661mm
Cylinder dia 80mm
Piston stroke 60mm
Air pressure 0.4- 0.63mpa
Impact frequencey ª 37hz
Air consumption _81l/s
Air pipe (inner dia ) 25mm
Water pipe (inner dia ) 13mm
The machine is a tool for the secondary blasting in quarry and especailly for rocking 20mm hose in marble and granite, it has characteristic of low weight, reasonable structure, handy use and little air consumption.
Specifications
Weight 6kg
Length 426mm
Air pressure 0.4-0.63mpa
Air consumption _9.5l/s
Air pipe dia 13mm
Impact frequency +51hz
Drill bit dia 20mm
Diameter: 32mm---42mm
Shank: 108mm*22mm
Effective length: 0.4m---3m
Mainly used for mining, coal cutting, tunneling, rock cutting in quarrying, transportation and irrigation projects.
Diameter: 32mm---42mm
Shank: 108mm*22mm
Effective length: 0.4m---3m
Mainly used for mining, coal cutting, tunneling, rock cutting in quarrying, transportation and irrigation projects.
Top reaming bit
Recently top drill has developed overburden system to be adapted to soft conditions and very hard formation. This can allow simultaneously case the drilled hole
Carbide knife sharpener
Features:
1) v-shaped carbide sharpening element in the head of the sharpener
2) will not rust and can be cleaned in dishwasher, will sharpen kitchen knives, serrated knives, pocket / hunting knives, arrow heads, garden tools and machetes
3) designed with an ergonomic grip, finger guard and thumb rest, the easy grip sharpener is both safe and comfortable
4) size: 160 x 70 x 18mm
Plastic pouch, hanging bag, blister packing available
