Find Verified Designer Boxes Suppliers, Manufacturers and Wholesalers

Van box-type ambulance

Truck box-type ambulance

The 30W USB-C Power Adapter offers fast, efficient charging at home, in the office or on the go. While the power adapter is compatible with any USB-C device, Apple recommends using it with MacBook Air and Apple Vision Pro. You can also use it with select iPhone and iPad Pro models to take advantage of the fast-charging feature.

Charging cable sold separately.

What's in the Box
Apple 30W USB-C Power Adapter

Tech Specs
USB-C

Neckline: Round Neck
Material Translucency: Slightly Sheer
Pattern: Print
Item Number: C1822O0FJ-A11

Advantages

Modern slim-fit design for a streamlined appearance.

Soft cotton fabric for everyday comfort.

Iconic Calvin Klein institutional logo on the chest.

Classic crew neckline and short sleeves.

Easy to pair with jeans, trousers, and shorts.

Suitable for casual wear and layering.

The line is designed to fill beer in to three different type of 0,33 litre glass bottles, label the bottles neck around and lower body small around and pack the bottles in to 4 x 6 bottle cartoon boxes. This bottling line capacity is 20000 bph. Clean glass bottles were brought on wooden pallets to depalletizer which feed them to the filling lines. Innofill DMG bottle filling machine and Handtmann MMS filtration system are located in a clean air room. KHS lamella conveyor system for bottle transport and cartoon boxes. The equipment were totally delivered by German KHS in year 2003, most of machines manufactured in year 2002. All control units are Siemens Simatic S7 model with remote connection. The line was shut down in year 2008 and it is still installed and in very good operational condition.

Main equipment are:
- Bottle Depalletizer KHS AL, semiautomatic
- Micro Filtration Handtmann MMS 130
- Filling Equipment KHS Innofill DMG (rinsing, filling and capping)
- Labelling Machine KHS Innoket 2060
- Cartoon Box Forming Machine KHS Innopak CA-1
- Bottle Packing Robot KHS Innopak SP 1200
- Box Marking System
- Case Sealer KHS Innopak CV.

The Grill Pan Selection G28440 is the ideal grilling pan and was designed to make your life easier on a daily basis. It has a fully non-stick coating for healthy cooking and easy cleaning. The titanium non-stick coating is highly efficient and durable. It has an ergonomic handle for maximum comfort during use and offers healthy cooking without the addition of fat, thanks to the high-quality fully non-stick coating. THERMO-SIGNALâ?¢ technology allows you to easily and simply perceive the ideal temperature for perfect cooking, ensuring excellent results. Compatible with all types of hobs. The non-stick coating is 100% safe as there is no added lead or cadmium, offering healthy cooking and easy cleaning.

Quality:

Cast Aluminum
Dimensions:

1 Pan: Length: 26 cm, Width: 26 cm

Key Features

-SIMPLIFY YOUR COOKING: Go from the stove into the oven and store leftovers in the fridge*, with the removable handle system offering exceptional everyday convenience. With Ingenio, simplify your cooking!

-SPACE-SAVING: With a space-saving stackable design, Ingenio cookware fits conveniently into cupboards, cabinets and shelves

-3-POINT SAFETY SYSTEM: Featuring a 3-point fixation system, Ingenio\'s patented handle ensures added safety and total peace of mind.

-WITHSTANDS UP TO 10 KG: Reinforced to support up to 10 kg of weight, the Ingenio handle\'s safe, secure design can withstand the most intense use

-10-YEAR GUARANTEE: Made to last, the sturdy Ingenio handle comes with a 10-year guarantee

-REMOVABLE HANDLE EXPERTISE: The undisputed authority in removable handle technology, Tefal Ingenio has been letting consumer satisfaction and safety drive its innovation for over 20 years. And because the excellence and safety of its products can only be guaranteed if they work together, Tefal Ingenio cookware cannot be used with any other handle available on the market.

Disposable surgical face mask type IIR, made in EU.
- Soft material (material standard ASTM 2100).
- 100 % latex-free
- Soft stretchable ear-loops
- Full width adjustable nose piece
- Fluid resistant white inner layer (by Nelson approved). Fluid resistance 160 mmHg.
- Highly breathable
- Fiberglass free
- Hypoallergenic
- Odorless
- Comfortable inner lining, for facial conform

PFE/BFE >99%

50 mask in one box.
One carton 50 boxes/2500 masks.

Colors blue, black, pink and white.

- MOQ 100 000 pcs
- 50 or 25 pcs/box
- FOB Hong Kong
- Cost 0.1pcs
- German melt-blown
- T/T 100% Advanced or 50% Deposit/50% upon shipping

Technical Specifications:

Product name: FIR65 - Energy Blanket Active Edition
GS1/EAN-code: 6430037210037
Dimensions: 200cm*92cm
The product dimensions spread open: 200cm*190 cm
The product weight: 7.4 kg
Operating temperature: 30ºC-60ºC
Voltage: 100V~120V 60 HZ, 220V~240V 50HZ
Output voltage: AC 240V, 330W (maximum)
Time function: 5-95 minutes
Control unit: One-channel adjustment (temperature | time)
Safety: The product is UL safety approved. The product is waterproof, soft and flexible
Materials: Nylon, polyurethane cloth, space carbon fiber
Approvals/Certificates: CE, TUV, UL, CCC
Test in Finland: Kuortane Testing Lab, University of Jyväskylä
Manual: FI,EN,SE,DN,NO,DE,RU,NL,FR,IT,CZ,ES,EST
Guarantee: 1 year
Product Package Size: 46*25*52 cm
Package Weight: 8 / 7,4 (net)
Delivery Carton: 3 pcs
Delivery Carton Size: 80*47*54 cm
Delivery Carton Weight: 24 kg

System Composition and Functions:
Digital Handheld Controller: adjusts and controls the temperature and timer settings of the blanket.
Power Box: supplies main power to the hand-held controller.
Energy Blanket: conducts FIR heating to the body.
Made of PU (polyurethane) fabric, and a sponge layer (XLPE cotton) with canvas lining, with heating elements of carbon fiber.
Power Cord: supplies main power to the control box.
Connection Leads: connects the thermal blanket to the control box.
Innovated FIR65 Technology.

Apple 20W USB-C Power Adapter for iPhone, iPad

Charge your new iPhone or iPad with no-worry about damaging it using the original Apple 20W USB-C wall adapter!

Use it for fast charging of your iPhone 12/13/14/15/16/17 series, from 0% to over 50% in just 30min. It is designed with a Type-C interface with a maximum output of 20W.

Features:
- Original Apple 20W USB-C power adapter
- A powerful and reliable charger for iPhone, iPad
- The Apple USB-C power adapter supports fast charging
- It comes without the charging cable - you need to use your own cable

Compatibility:
- iPhone 15 Pro Max, iPhone 15 Pro, iPhone 15 Plus,iPhone 15, iPhone 14 Pro Max, iPhone 14 Pro, iPhone 14 Plus, iPhone 14, iPhone 13 Pro Max, iPhone 13 Pro, iPhone 13, iPhone 13 mini, iPhone 12 Pro Max, iPhone 12 Pro, iPhone 12, iPhone 12 Mini, iPhone SE (2020), iPhone 11 Pro Max, iPhone 11 Pro, iPhone 11, iPhone XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8, iPhone 8 Plus
- iPad Air (2020), iPad 10.2 (2020), iPad Pro 11 (2020), iPad Pro 12.9 (2020), iPad Mini (2019), iPad Pro 12.9 (2015), iPad Pro 12.9 (2017), iPad Pro 10.5 (2017), iPad Pro 12.9 (2018), iPad Pro 11

Related categories: Phone Accessories, Phone Accessories, Phone Chargers, iPhone Charger, iPhone USB-C Charger

Buyers Purchase Order to Be Received.

Confirmation of the Accreditations Hold by the Freilager Warehouse or the Warehouse Where the Goods Are Stored
Confirmation by the Seller Through a Notary That the List of the Materials (Quantity,nr of Ampoules and Relevant Serial Number, Certificate of Analysis and Weight for Each Ampoule, Number of Boxes and Number of Ampoules Contained in Each Box ) Is Stored at the Adderss of Zuricher Freilager, Freilagerstrasse 47 Ch-8043 Zurich Ch, in the Warehouse Number 123 Under the Custody of Mr Red and Mr White, a Storage Contract to Be Shown, Free of Any Liens Incumbrancrs Plrdges or Any Other Legal Instrument Limiting Its Possession and the Possibility to Sell by the Seller to the Buyer
Declaration by the Warehouse, With an Officially Issued Stock Report, That the Storage of the Goods Is Paid in Full and That the Goods Are Free to Be Transfered
Confirmation by the Warehouse About the Quantity of the Material Stored There, Batch by Batch, Certificates of Analysis and Origins Customs Invoices at Entry in Ch and Any Other Document Which Is Requested by the Buyer for the Export, Also Confirming That the Material Is Legally Stored and Declared in Switzerland
List of Documents Requested by the Buyer to Sell and Pay the Product
Incoterms Exw Zuricher Freilager
Payment Againt Conditional Release by the Warehouse if the Credential Are Accepted , Buyer Pays Team , Team Pay Seller All the Transactions on the Same Buyers Bank Branch
We Can Instruct the Warehouse to Sample the Material in Case Buyer Wants to Do So, the Sample to Be Analyzed Must Be Paid to the Buyer

Drum and Container Filling Line, Semiautomatic YOC 2006

The line is designed for filling both 1000 liter IBC’s and normal 209 liter drums / barrels. It consist of straight chain driven heavy duty roller conveyor which is carrying IBC’s or a standard pallet loaded with four drums / barrels through the filling process and conveying them for further storing. The filling machine is semiautomatic coarse-and-fine filling station; first is programmable volumetric and then fine filling with integrated weighing system. Cap closing / bunging and sealing will be made manually but a machine aided. The station operation is controlled by Siemens S7C programmable logic.

The line is manufactured in 2006 by Finnish company “Insinööritoimisto Jyrki Kekälainen” who is specialized supplying automation solutions filling and packing applications.

Operation description:
The operator lifts the empty containers on the conveyor (open the cap of container), the container will move into filling machine and it will be filled automatically with 2 "and 1 / 2" valves, coarse-and fine-filling. After filling the container will move out of the machine and the operator will fix the label and close the cap. After the filling station there is ~16 m long puffer conveyor for the filled IBC`s, where a fork lift will pick up the IBC`s

In drum filling the operator lifts the empty drums on pallet (open the caps). Then he lifts the pallet on the conveyor. In the machine there is an extra filling lence for the drums. The drums are filled on the weighing system of the machine which is controlling the filling of each barrel. After the drum is filled the operator move the lence into second drum and machine start to fill it. After all drums are filled the pallet will move out of machine and the operator will close the caps and fix the seals and labels.

Technical data:
Manufactured in: 2006
Suitable for: Standard IBC and Drums
Max filling weigh: 1500 kg
Filling accuracy: 0.5 kg
Filling capacity: 7 IBC/hour or 35 Drums (209 liters) / hour
Roller conveyor type: Chain Driven, Galvanized
Roller conveyor length: Approx 16 meters
Roll diameter: 80 mm.

The fan is made by German Pollrich Ventilatoren GmbH in year 2004 and it has been as a back-up emergency fan which has practically newer used and therefore the unit is new like condition. This fan was designed to blow explosive air/gas mixture (VOC) and therefore it fulfills category II 2G, temperature class 1 ATEX 95 norm of explosive proof design. The motor and fan are built on a common heavy duty frame and they are connected with a flexible coupling.

Technical data:
Manufacturer: Pollrich Ventilatoren GmbH
Year of manufacture: 2004
Fan type: VR50S11C1UK0900LG360MMUU
Manufacturing no: 123665
Volume: 10.55 m3/sec (37980 m3/h)
Max press difference: 8000 Pa (0.08 Bar)
Speed: 2980 RPM
Max gas temperature: 80 C
Power requirement: 104.6 kW
Electric motor: CEMP 132 kW / 2970 RPM
Type: AC70 315M 2
Classifications: II 2 G EEXd IIC T4 IP 55.

R-Steel® Wire Loops and Boxes manufactured by R-Group Finland Oy are steel parts consisting of a high strength steel wire and a steel box. R-Steel® Wire Loop boxes are very easy to use on site, with proven no tool tear off tape that releases the flexible loops.

Our wire loop box range includes: Single wire loop boxes and Double wire loop boxes. Highly effeâ?¢cient product available for both precast and cast in situ structure. It is mainly used in the connection of slabs, walls and columns.
Quality control of the wire rope loops is done according to the requirements of the Finnish Code of Building Regulations and the instructions according to the quality and environment system of the R-Group Finland Oy (ISO9001 and ISO 14001). R-Group Finland Oy has a quality control contract with Inspecta Sertifiointi Oy.
The steel box and the wire rope are zinc coated. Zinced products are passivized with min. 1 month of storage.

R-Steel Loop is a flexible wire rope is bent to loop and held together by compression sleeve. R-Steel® Loop may be used e.g. to tie concrete wall elements to the building frame with ribbed steel bars installed through the wire rope loop.

The wire boxes have the advantage of ease of casting and protection of the loop, however the R-Steel® loops can be used in thinner panels and can also be used for lifting.

Single Wire Loop Boxes
For Single Boxes available standard wire lengths of 60 mm, 80 mm, 100 mm, 120 mm and 140 mm.

Double Wire Loop Boxes
Double Wire Loop Box offers unique solution for joining double walls to precast elements. Design resistances can be achieved in all directions.
Wire lenghts of 80 mm and 100 mm are available for double wire loop.
Thickness of the steel plate of the box is 0,7 mm, according to SFS-EN 12385.

The equipment is designed and manufactured by Gough & Co Ldt, UK in year 1999 / installed in 2000, manufacturer’s type single deck Vibracon GVF4. We have totally 3 identical units which were dismantled in 2007 and all of them are in very good operational condition. These are single deck circular screen design for high velocity scalping, de-watering or single deck separation in chemical and pharmaceutical industry. (These units were screening oversized particles in PVC - granulate factory truck loading station) The perforated screen and all product touching parts are made on stainless steel AISI 304L. Top deck houses the screen and the discharge spout for oversize particle removal is fitted to it. Top deck is supported with mechanical spring and vibration movement is created by two contra rotating vibrating motors on the outside of the unit so there are no internal working parts. Vibration power can be adjusted.

Technical data:
Type: Vibracon GVF 4
Material: AISI 304L – product touching parts
Perforated screen: Mesh size 4 mm
Screen diameter: 1100 mm
Screen area: 9500 cm2
Vibrators: 2 x 0.52 kW units.

Totally two identical 145 kW wind turbine units, made in 1988 by Danish A/S Nortank, total operating hours approx 75000. The equipment have been dismatled since 2008 and inspected and serviced for operation condition and they are ready for immediate delivery

We have totally 2 units of uninstalled complete wind turbines manufactured by Danish A/S Nordtank in year 1988, manufactures type NTK 130 with rated power of 2 x 145 kW. The mills are in good operational condition and ready for immediate shipment. The hubs are heat treated MEEHANITE hubs made by company SABROE and are equipped with cast iron construction which allows adjustment for blade pitch angle. The blades are made by Danish company LM- Glasfiber, material is glass fiber reinforced polyester and they have self-supporting structure with bushing roots. The blades have also hydraulically activated tip brakes which automatically rotate the tips to a 90 degree break angle when wind is lost or it can be used for maintenance stoppage. The gear box in made by German Lohman & Stolterfoht and it is two step planetary gear type with high AGMA rating of 302 kW. The break system is 100% fail safe Nortank’s own hydraulically / mechanically activated brakes. Both units have they own Motorola 6809 multi-microprocessor operated control units which are housed in dust proof steel cabinets.

More information on requests, for spam protection please introduce yourself properly.

Main data of one mill:
Manufacture’s type: NTK 130F/LM
Year of manufacture 1988
Total operating hours: approx. 75000
Rated capacity, max: 145 kW
Number of blades: 3 pcs
Rotor diameter: 22 m
Rotor speed: 44.5 rpm
Cut-in wind speed: 4.0 m/sec
Cut-out wind speed: 53 m/sec (120 mph)
Hub height: 26 m
Generator: ASEA 145 kW / 1500 rpm / 50 Hz
Blade type: LM 9.7 m H/H/T diam. 21 m
Gear box type: Lohman & Stolterfort GPC 145
Clutch type: Lohr & Brokamp Universal Joint No 105
Total weight: 15200 kg.

The recovery plant is specially designed to recover CO2 from fermentation processes at breweries. This complete CO2 plant was installed in 2001 and it has nominal CO2 removal capacity of 1000 kg/h. The plant has Siemens S 7 control system where operation is carried our via a large 12 " color screen panel with Windows CE operating system. This is a complete CO2 recovery plant and final delivery scope depends on buyers needs. The plant has been in operation only approx 5 years and is still installed and in very good condition. The carbon dioxide plants was designed by Danish Union Engineering (www.union.dk ) and the delivery includes following main components:

- 1 Scrubber for gas flushing
- 2 Foam catcher vessels
- CO2 collection, inflammable
- 2 Mehrer TZW 70 CO2 compressors
- 2 Carbon filters
- 2 Dehydrators
- CO2 Liquefier
- CO2 Storage Tank
- 2 Cooling compressors GEA Grasso GD-3 for R717
- Air cooled condenser for NH2 compressors
- Alarm center for CO2 and NH3 concentration
- Station for 40 kg CO2 still tank filling
- CO2 pumping station from a truck to the factory
- CO2 purification tester
- Steam heated evaporator for liquid CO2

Detailed technical information available for serious buyers

GEA Varitherm VT-20 Plate Heat exchanger is made of several Varitherm-design stainless steel plates which are combined to form one effective heat transfer unit. Within each plate package the heat exchanger plates support each other at the metal-on-metal profile cross points, which ensure the stable behavior of the plate gap. The plate gasket has so called glue less sealing system. VT-20 is specially designed for cooling and heating of fluids with particle content up to a particle size of 2 mm as well as condensation of vapors, gas cooling and gas dehumidifying. This unit is in good operational condition.

Manufacturer: GEA Ecoflex GmbH
Type: VT 20 BC-12
Serial no: 170/12982
Year of manufacture: 2000
Frame material: Stainless Steel AISI 4571
Plate material: Stainless Steel
Max. operating pressure: 16 Bars
Max. operating temp. 100 C
Max flow volume: 90 m3/h
Width: 337 mm
Length: 999 mm.

Manufacturer: GEA Ecoflex GmbH
Type: VT 20 BC-12
Serial no: 170/12982
Year of manufacture: 2000
Frame material: Stainless Steel AISI 4571
Plate material: Stainless Steel
Max. operating pressure: 16 Bars
Max. operating temp. 100 C
Max flow volume: 90 m3/h
Width (plates) 337 mm
Length (plates): 1370 mm.

ating line is delivered by Finnish Elmont Oy and it consist of 59 separate dipping tanks, 6 material handling cranes and related process and automation equipment. We have the dipping tanks and material handling cranes in our store for sale. Dipping tank materials are AISI 316, SS, PP, HST and PP. All tanks are 2200 mm long and 1250 mm height, widths varies from 450 to 1740 mm, volumes from 1213 to 4016 liters. All tanks are in good condition.

The cranes are designed for those tanks and we have 6 pcs of them. Cranes have 0.25 kW gear motors and control panels. Structure is made of steel and they are in good condition.

If you are looking for such equipment, please contact us and we are pleased to give you more deep information.