Supplier From
Bishkek,
Chy,
Kyrgyzstan
Supplier From
Bishkek,
Chy,
Kyrgyzstan
General Description:
Spray/aerosol-penetration resistant, biohazard-protective coverall, for use in EVD patient-isolation units for infection prevention and control against viral penetration.
Technical specifications
Product name: Coverall type 4B/5B/6B
Elasticated hood around face.
Elasticated cuffs and ankles.
Elasticated sleeves.
Taped seams.
Zipper with re-sealable flap protecting leakage through seams.
Stitched-in neck label indicating the type and performance of the suit against the below mentioned standards.
White color with blue tape
Material: 65 GSM Non-woven PP+PE 65 GSM +/- 2gsm
Lightweight, do not contain rubber/ latex.
Antistatic treated on both sides.
Fabric is Infective agent tested against viral penetration at minimum 1.75kPa (class 2) (or equivalent international standard)
Non-sterile
Single Use, disposable
Size: M-XL
Conforms to standards below:
European Directive 89/686/EEC on personal protective equipment Category III: Chemical protective coverall, comply with Type 4B/5B/6B including below standards.
EN 13034:2005+A1
EN 14605
EN ISO 13982-1
EN 1073-2
EN ISO 13688
EN 1149-5
Barrier to infective agent standards: EN 14126:2003 certified passing infectious agent test according to ISO 16604:2004 (Resistance to penetration by blood borne pathogens using bacteriophage Phi X 174) standard at minimum exposure pressure of 1.75kPa (class 2) (or equivalent international standard)
Performance requirement ISO standards:
EN 340 General requirements
EN ISO 17491-4: 2008 (supersedes: EN 468 mod. Spray aerosol test)
EN 14325 Test methods & performance classification
EN ISO 3758 (ISO 3758) Textile care symbols
EN ISO 13935-2 Seam strength
Certificates
CE from notified body
ISO13485
Supplied with
Supplier's instruction for use
Shelf life : As indicated by supplier
Storage conditions : As indicated by supplier
Packaging and labelling : Individually packaged in a transparent plastic bag.
Labelling of the primary packaging displays, at least: product name, product reference, manufacturer name, size, type, coverall performance testing information against the mentioned standards. Information for particular storage conditions (temperature, pressure, light, humidity, etc.), as appropriate (or equivalent harmonised symbol), if applicable. All indicated at least in English
