Find Verified Copper Ash Suppliers, Manufacturers and Wholesalers

CLASS C FLY ASH

- Source: Produced from the combustion of younger lignite or sub- bituminous coals.

- Composition: Contains a high percentage of calcium oxide (CaO), typically more than 20%. It also includes silica, alumina, and iron oxide.

- Properties: Exhibits both pozzolanic and self-cementing properties. The high lime content allows it to harden and gain strength independently when mixed with water.

- Key uses: Used in concrete when early-stage strength development is needed. Its self-cementing properties can allow for a partial replacement of cement in a concrete mix.

Class F Fly Ash

- Source: Derived from the combustion of harder, older anthracite or bituminous coals.

- Composition: Primarily composed of silica (silicon dioxide, SiO2), alumina (aluminum oxide, Al2O3), and iron oxide (Fe2O3). It has a low calcium content, typically less than 10%.

- Properties: Possesses pozzolanic properties, meaning it requires a cementing agent like hydrated lime or Portland cement to react with water and form a cementitious compound. It has no self-cementing properties on its own.

- Key uses: Used in concrete to increase its long-term strength, reduce permeability, and enhance resistance to sulfate attacks.

Light / Dense Soda Ash
Sodium Carbonate (Na2CO3), commonly known as Soda Ash, may well have been the third "industrial chemical" used by man; perhaps employed sometime after salt (NaCl) and lime (CaO).

Total Alkalinity (as Na2CO3) % by mass 99.0
Chloride (as NaCl) % by mass 0.30-0.40
Iron (as Fe2O3) % by mass â?¤0.005
Matter insoluble in water % by mass 0.08
Sulphates (as Na2SO4) % by mass 0.07
Bulk Density gm/liter (Light Ash) 540-630
Bulk Density gm/liter (Dense Ash) 950-1200

Aluminium Ash is a by-product obtained during the melting and processing of aluminium metal. It contains recoverable aluminium metal content along with aluminium oxide and other impurities.

It is widely used for aluminium recovery, cement industry additives, refractory materials, and chemical processing applications

Soda ash light, also known as sodium carbonate, is a fine, white powder with a lower bulk density compared to soda ash dense. It is widely used in various industries due to its solubility and reactivity. Here are some of its key applications:
1- Detergents and Cleaning Products: Acts as a water softener and pH regulator.
2- Glass Manufacturing: Used in the production of flat glass and container glass.
3- Textile Industry: Helps in dyeing and finishing processes.
4- Water Treatment: Used to adjust pH levels and soften water.
5- Chemical Production: Serves as a raw material for producing other sodium compounds.

Best quality plant supply soda ash sodium bicarbonate professional manufactory with SGS/BV certificate

Soda Ash

Item: ISoda Ash Dense
Total Alkalinity/%: 99.5Min
Chloride Content(NaCl)/%: 0.30Max
Iron Content/%: 0.003Max
Sulphate Content/%: 0.03Max
Water Insoluble Matter/%: 0.02Max Product Name:Soda Ash


CAS No.:497-19-8
EINECS No.:207-838-8
Packaging Detail:SODA ASH LIGHT:40kgs bags and 750kgs bags. SODA ASH DENSE: 50kgs bags and 1000kgs bags.
Application: Best quality plant supply soda ash sodium bicarbonate professional manufactory with SGS/BV certificate
1.Glass industry
2.Production of borates, phosphates and silicates
3.Production of glues and adhesives
4.Detergent and soap manufacturing industry
5.Paper manufacture
6.Water purification
7.Textile industry
8.Pharmaceutical industry as a mouthwash, etc
9. Foods and daily life

Vital chemical used predominantly in glass manufacturing and detergent formulations.

Uses:
Glass industry
Detergent manufacturing
Chemical production

Incoterms - CIF and FOB
Product origin - INDIA
Minimum Order Size: 1 FCL
Price - Keeps Fluctuating (To be discussed)
Packaging details - Customised packing

Use of 5% Rice Husk Ash:

Toothpaste
In Kerala, India, charcoal from Rice husks (Umikari in Malayalam) were universally used for over centuries in cleaning teeth, before toothpaste replaced it.

Brewing
Rice hulls can be used in brewing beer to increase the lautering ability of a mash.

Fertilizer and substrate
Rice hulls can be composted, but their high lignin content can make this a slow process. Sometimes earthworms are used to accelerate the process. Using vermicomposting techniques, hulls can be converted to fertilizer in about four months.

Rice hulls that are parboiled (PBH) are used as a substrate or medium for gardening, including certain hydrocultures. The hulls decay over time. Rice hulls allow drainage, and retain less water than growstones. It has been shown that rice hulls do not affect plant growth regulation.

Juice extraction
Rice hulls are used as a "press aid" to improve extraction efficiency of apple pressing.

Pet food fiber
Rice hulls are an inexpensive byproduct of human food processing, serving as a source of fiber that is considered a filler ingredient in pet foods.

Pillow stuffing
Rice hulls are used as pillow stuffing. The pillows are loosely stuffed and considered therapeutic as they retain the shape of the head.

Insulating material
Rice hulls themselves are a class A thermal insulating material because they are difficult to burn and less likely to allow moisture to propagate mold or fungi.It is also used as roofing after mixing it with mud and water.

Particle boards and cardboard
Rice hulls are also used to make particle boards and cardboard. The silica in rice husk make the particle boards less attractive to termites.

Packaging Type Bag

Grade Standard Bio-Tech Grade


Physical State Powder


Color Grey


Packaging Size 25 Kg

Usage Steel Industries


Brand Guru


Moisture 5%


Minimum Order Quantity 1000 Kg

We are provide good quality of Ultrafine fly ash material with best rate Guru Corporation has strong position to supply Fly ash at different grades for different usages on a global scale.

We are well recognized in the market for successfully matching up with the demands of quality Raw Rice Husk. A hard protecting covering of the rice, Rice Paddy Husk is extensively used as fertilizer, fuel, as a building material, as insulation material and other industrial applications. Being strictly tested for quality, we also ensure that it is free from any foreign material and is offered by us to our industrial customers at competitive prices.

We are leading manufacturer , Exporter, Supplier of Rice Husk Ash.

Rice milling generates a by product know as husk . This surrounds the paddy grain. During milling of paddy about 78 % of weight is received as rice , broken rice and bran .Rest 22 % of the weight of paddy is received as husk . This husk is used as fuel in the rice mills to generate steam for the parboiling process . This husk contains about 75 % organic volatile matter and the balance 25 % of the weight of this husk is converted into ash during the firing process , is known as rice husk ash ( RHA ). This RHA in turn contains around 85 % - 90 % amorphous silica. So for every 1000 kgs of paddy milled , about 220 kgs ( 22 % ) of husk is produced , and when this husk is burnt in the boilers , about 55 kgs ( 25 % ) of RHA is generated.

India is a major rice producing country , and the husk generated during milling is mostly used as a fuel in the boilers for processing paddy , producing energy through direct combustion and / or by gasification . About 20 million tones of RHA is produced annually. This RHA is a great environment threat causing damage to the land and the surrounding area in which it is dumped. Lots of ways are being thought of for disposing them by making commercial use of this RHA. The particle size of the cement is about 35 - 45 microns . There may be formation of void in the concrete mixes , if curing is not done in properly . This reduces the strength and quality of the concrete . Our product ? Silpozz ? which is made out of this RHA is finer than cement having very small particle size of 25 microns , so much so that it fills the interstices in between the cement in the aggregate. That is where the strength and density comes from. And that is why it can reduce the amount of cement in the concrete mix .

RHA is a good super-pozzolans . Silpozz can be used in a big way to make special concrete mixes . There is a growing demand for fine amorphous silica in the production of special cement and concrete mixes ,high performance concrete ,high strength, low permeability concrete, for use in bridges, marine environments , nuclear power plants etc. This market is currently filled by silica fume or micro silica , being imported from Norway, China and also from Burma . Due to limited supply of silica fumes in India and the demand being high the price of silica fume has risen to as much as US$ / ton in India.

Technical Specifications:

SiO2 : Silica 85 % minimum
Humidity:2 % maximum
Particle size: Powder or Flakes
Colour:Grey Black & White
Loss on ignition at 800C 4 % maximum

Fly ash is a finely divided residue made from the combustion of pulverized coal that can be used to increase concrete durability and workability, while reducing permeability.
fly ash has a wide variety of applications and uses, though it is primarily known for improving the durability and workability of concrete mixes. Fly ash is also a filler in paints, adhesives, and metal and plastic composites. It's commonly used as structural fill for road construction and fly ash can be used to make bricks, ceramic tiles, plaster, Portland cement, and ready-mix cement.

We hold immense expertise in making available Copper in many forms
including LME registered and non registered cathodes, billets, rods,
cakes, bars, foil, sheet, granules, plates, powder, shot, turnings, wire,
insulated wire, mesh and “evaporation slugs”.
Copper is one of the most important metals. Copper is reddish with a bright metallic
lustre. It is malleable, ductile, and a good conductor of heat and electricity (second
only to silver in electrical conductivity). Its alloys, brass and bronze, are very important.
Monel and gun metals also contain copper. The most important compounds are the
oxide and the sulphate, (blue vitriol

Fly Ash generated from Power Plants.

Coal Fly Ash
CFA could be used in huge quantities in two areas: ash dyke construction and low-lying region filling [26,27,28]. In several affluent countries, CFA has been utilized successfully as a structural filler.

Copper is found in natural ore deposits around the world. The most abundant ore are chalcopyrite and bornite, which contain both copper and iron sulphides. These account for about 80% of the worlds known ores. We supply ores with copper content within fairly narrow ranges of specifications to satisfy our customer needs

Use of 4% Burned Rice Husk Ash

Toothpaste: In Kerala, India, charcoal from Rice husks (Umikari in Malayalam) were universally used for over centuries in cleaning teeth, before toothpaste replaced it.

Brewing: Rice hulls can be used in brewing beer to increase the lautering ability of a mash.

Fertilizer and substrate: Rice hulls can be composted, but their high lignin content can make this a slow process. Sometimes earthworms are used to accelerate the process. Using vermicomposting techniques, hulls can be converted to fertilizer in about four months.

Form Powder

Physical State Powder

Colour Grey

Usage / Application Agriculture


Grade Standard Technical Grade


Color Grey


Packaging Size 25 kg


Packaging Type HDPE Bag


Usage Industrial


Brand
Guru


Country of Origin
Made in India


Moisture
2%


Minimum Order Quantity
1000 Kilogram

We are Leading Manufacturer of 6% Powder Rice Husk Ash. Rice Husk are use in steel industries, agro industries etc.

Form Powder

Colour Grey


Grade Standard Technical Grade


Usage / Application Industrial


Physical State Powder


Color Grey


Packaging Size 10 Kg


Packaging Type Paper Bags


Brand Guru


Country of Origin Made in India


Moisture 2%


Minimum Order Quantity 5000 Kg

Use of 9% Expandable Rice Husk Ash:

Toothpaste

In Kerala, India, charcoal from Rice husks (Umikari in Malayalam) were universally used for over centuries in cleaning teeth, before toothpaste replaced it.

Brewing
Rice hulls can be used in brewing beer to increase the lautering ability of a mash.

Fertilizer and substrate
Rice hulls can be composted, but their high lignin content can make this a slow process. Sometimes earthworms are used to accelerate the process. Using vermicomposting techniques, hulls can be converted to fertilizer in about four months.

Rice hulls that are parboiled (PBH) are used as a substrate or medium for gardening, including certain hydrocultures. The hulls decay over time. Rice hulls allow drainage, and retain less water than growstones. It has been shown that rice hulls do not affect plant growth regulation.

Juice extraction
Rice hulls are used as a \"press aid\" to improve extraction efficiency of apple pressing.

Pet food fiber
Rice hulls are an inexpensive byproduct of human food processing, serving as a source of fiber that is considered a filler ingredient in pet foods.

Pillow stuffing
Rice hulls are used as pillow stuffing. The pillows are loosely stuffed and considered therapeutic as they retain the shape of the head.

Insulating material
Rice hulls themselves are a class A thermal insulating material because they are difficult to burn and less likely to allow moisture to propagate mold or fungi.It is also used as roofing after mixing it with mud and water.

Particle boards and cardboard
Rice hulls are also used to make particle boards and cardboard. The silica in rice husk make the particle boards less attractive to termites.

Form Powder

Physical State Powder

Usage / Application Industrial Fuel

Grade Standard Technical Grade


Packaging Size 25 Kg


Packaging Type HDPE Bag


Usage Industrial

Brand Guru

Country of Origin Made in India


Moisture 9%


Colour Black


Color Grey


Minimum Order Quantity 1000 Kg

Use of 5% Rice Husk Ash:

Toothpaste

In Kerala, India, charcoal from Rice husks (Umikari in Malayalam) were universally used for over centuries in cleaning teeth, before toothpaste replaced it.
Brewing
Rice hulls can be used in brewing beer to increase the lautering ability of a mash.
Fertilizer and substrate
Rice hulls can be composted, but their high lignin content can make this a slow process. Sometimes earthworms are used to accelerate the process. Using vermicomposting techniques, hulls can be converted to fertilizer in about four months.
Rice hulls that are parboiled (PBH) are used as a substrate or medium for gardening, including certain hydrocultures. The hulls decay over time. Rice hulls allow drainage, and retain less water than growstones. It has been shown that rice hulls do not affect plant growth regulation.


Juice extraction
Rice hulls are used as a "press aid to improve extraction efficiency of apple pressing.
Pet food fiber
Rice hulls are an inexpensive byproduct of human food processing, serving as a source of fiber that is considered a filler ingredient in pet foods.
Pillow stuffing
Rice hulls are used as pillow stuffing. The pillows are loosely stuffed and considered therapeutic as they retain the shape of the head.
Insulating material
Rice hulls themselves are a class A thermal insulating material because they are difficult to burn and less likely to allow moisture to propagate mold or fungi.It is also used as roofing after mixing it with mud and water.
Particle boards and cardboard
Rice hulls are also used to make particle boards and cardboard. The silica in rice husk make the particle boards less attractive to termites.

Prominent & Leading manufacturer from Ahmedabad, we offer 2% Pulverized Rice Husk Ash.

We are Leading Manufacturer of 6% Powder Rice Husk Ash. Rice Husk are use in steel industries, agro industries etc.

We are engaged in offering high quality 2% Rice Husk Ash which is used as tundish and ladle covering compound which is basically used for steel, sleelves, hot-top etc manufacturing purpose.

Product : Electrolytic Copper Cathodes
Purity : Minimum 99.99%, LME Standards, Grade A
Usage : Used primarily in the electrical industry for manufacturing high-quality copper wire, power cables, and transmission components where superior electrical conductivity and corrosion resistance are critical.

High purity Pure Copper Foil / strip / Tape For PWE(PCE) using
99.9% Pure copper tape / strip / foil
Cu%99.90 C11000 Cu ETP
Min thickness:0.001mm
little order can accept
Specification of red copper strip we supply:
Strip: thick:0.15-3.0mm width:610mm
Plate:thick:0.5-3mm width:610mm Length:2500mm

Commodity : Soda Ash Light / Dense
Molecular formula:na2co3
Molecule weight:105.99
H.S Code:28362000
Cas: 497-19-8

Properties : white crystal powder, easily soluble in water, water solution is alkali. Easily absorbing moisture and co2 if exposing in the air.

Applications: mainly used in glass-manufacturing, chemical industry, metallurgy, paper, dye, synthetic washes and petrochemistry.

Packing :25kg/ 40kg/50kg/750kg pp woven bag with waterproof pe inner , two layers

Specifications standard : gb210.1-2004
Items : specification
First grade : specification
Second grade
Total alkalinity(as na2co3 in dry base) %99.2% min98.8% min
Chloride content(as nacl) %0.7% max0.9% max
Iron content(as fe in dry base) /%0.003% max0.0035% max
Sulphate content(as so4 in dry base) /%0.03% max0.03% max
Water insoluble matter /%0.03% max0.03% max
Loss on ignition a/ %0.5% max0.5% max

Ash Wood Crema is a stylish bedroom tile featuring a warm brown tone and elegant matt finish. Its wood-inspired character brings natural warmth and a calming feel to bedroom interiors, while the large 600 X 1200mm format creates a clean and contemporary appearance. It is an ideal choice for creating cozy, sophisticated spaces.

10% Double Calcined Rice Husk Ash use in agro land farming, agarbatti , heat insulate, construction flux, etc.

Form Powder

Colour Grey

Grade Standard Bio-Tech Grade

Purity % 100%


Usage / Application Industrial


CAS No 0282828


Color Light Grey


Physical State Powder


Packaging Size 25 Kg


Packaging Type HDPE Bags


Brand Guru


Country of Origin Made in India


Moisture 10%


Minimum Order Quantity 1000 Kg

Copper Cathodes (DRC Origin) LME -17% | Trial + 2% PB + DLC MT700


We are pleased to introduce Candour Agency, Mumbai (India), a trade-facilitating company specializing in structured international metals transactions.
We hereby offer Copper Cathodes (LME Grade A), origin: Democratic Republic of Congo, under the following commercial terms:
Commercial Terms:
Trial Shipment: Available (200-500 MT)
Contract Quantity: 2,000-5,000 MT per month
Price: LME 17% (net to buyer)
Performance Bond: 2% issued by Seller against operative DLC
Payment Terms:
100% Irrevocable, Non-Transferable DLC (MT700)
Payable at the destination port post SGS/CIQ inspection
Settlement via MT103 / TT
Alternative Supply Option - Bonded Warehouse: Copper Cathodes are also available ex-bonded warehouse in Zambia / Tanzania, where buyers may:
Open the DLC and physically inspect the material at the yard before lifting
Purchase on Ex-Bonded Warehouse basis
Or opt for FOB / CIF shipment to the destination of their choice

Intermediaries: We welcome collaboration with intermediaries having direct buyer mandates.
Commissions are protected and can be mutually agreed upon based on the deal structure.
Further documentation, technical specifications, and supporting details shall be shared with prospective buyers upon progression of the transaction.

Serious buyers are requested to share LOI/ICPO along with bank details to proceed with FCO and SPA documentation.

We look forward to establishing a long-term and mutually beneficial business relationship.

Copper Cathodes High-Purity Copper for Industrial Manufacturing

Our copper cathodes are high-purity refined copper sheets produced through electrorefining processes. Typically conforming to LME Grade A standards, they contain a minimum copper content of 99.99%, ensuring excellent electrical and thermal conductivity.

Copper cathodes serve as the primary raw material for producing a wide range of copper products, including electrical wires, cables, rods, tubes, and industrial components. They are widely used in power transmission, electronics, construction, and manufacturing industries due to their superior conductivity and reliability.

Key Features:

High-purity copper (minimum 99.99% Cu content)
Electrorefined to meet international standards (LME Grade A)
Excellent electrical and thermal conductivity
Uniform rectangular sheets with consistent weight and composition
Free from impurities and suitable for direct industrial use
Primary raw material for copper wire, rods, and tubing production
Widely used in electrical, construction, and industrial sectors
Available in bulk for wholesale and export supply
Carefully handled and packaged to maintain quality and integrity

Commodity: Copper Millberry

QYANTITY: 1,000 MT - 20,000 MT Per Month

PRICE: $5,900 USD

CFR/CIF DELIVERY TERM:

MT760/MT700/MT103 At Destination.

YARD VISIT: The buyer may visit the loading yard.

SBLC & DLC PAYMENT TERM:

1) Buyer issues official ICPO with company registration license.
2) Seller issues FCO to buyer for signing and returns with letter of acceptance letter stating to adhere to seller's terms and procedure.
3) Seller issues draft contract (SPA) open to amendment and review, buyer endorses and return to seller in word format for final contract.
4) Seller reviews and counter signs and notarize contract and send the final copy to buyer with letter of guarantee to supply, all expenses to seller.
5) Buyer acknowledges receipt with acceptance letter & RWA swift MT199 within
5 working days
6) Seller release to buyer the below listed soft performance guarantee POP documents:
- Commitment letter to supply product. - Letter of Availability of Product.
- Product Passport.
- Company Registration License.
7) Buyer's bank (a Top-50 bank in the world) issues bank instrument via BG MT760 or
DLC MT700 for the value of first month shipment to Seller's nominated bank coordinates, based on the acceptable verbiage to the Seller's bank within 10 (5+5) banking days. Loading commences. Failure to swift bank instrument within 10 working days, buyer pays a 10% deductible cost of shipment to shipping company as a provisional guarantee performance.
8) Within 5 working days from receipt of bank instrument, receiver bank issues 2% performance bond PB. However, note that seller will not issue a 2% PB on 10%
provisional guarantee performance payment to the shipping company.
9) Shipment commences at loading port and within 10 days issues full POP/shipping documents/legalized SPA via bank to bank and seller send scanned copies to buyer via email.10) Buyer conducts SGS/CIQ inspection at the destination port to ascertain quantity/quality of Product and within 72 hours make full payment via MT103/TT and seller releases
Title of Product and pays commission.

Our copper spoons are ideal for soups, desserts, and other dishes, providing a luxurious and comfortable way to enjoy your meals.

We offer high-quality pure copper cutleries supplies that combine elegance, durability, and health benefits. Our pure copper cutleries are crafted with the finest materials and designed to provide a unique and luxurious dining experience.

Our copper knives are crafted with sharp edges and durable construction, making them perfect for chopping, slicing, and serving.

We offer high-quality pure copper cutleries supplies that combine elegance, durability, and health benefits. Our pure copper cutleries are crafted with the finest materials and designed to provide a unique and luxurious dining experience.

Our copper forks are perfect for formal and informal dining, providing a luxurious and elegant way to enjoy your meals.

We offer high-quality pure copper cutleries supplies that combine elegance, durability, and health benefits. Our pure copper cutleries are crafted with the finest materials and designed to provide a unique and luxurious dining experience.

Our pure copper bottles are made from 100% pure copper, providing maximum health benefits and antimicrobial properties.Our copper jugs are crafted with pure copper, providing maximum health benefits and antimicrobial properties.

We further provide varied Types of Copper Jugs and Glass Supplies.

Copper purity : 99.9%
Form : Bright, shiny, uncoated wire
No insulation, paint, oxidation, or solder
Most valuable grade

Fine quality of copper sheet pure and finished from Skilled artisans.

Copper utensils are cookware and serving items made from copper, a metal known for excellent heat conductivity, durability, and traditional appeal. They are widely used for cooking, serving, and decorative purposes.

Copper cathode is the primary raw material input for the production of copper rod for the wire and cable industry. Brat supplies cathodes that are produced with ISA Technology and comply with the cathode standards LME Grade A and Copper Cathodes Grade 1 (ASTM B115).

We supply Copper scrap that is procured directly from scrap yards. These are processed in a manner to suit the requirement of the buyer.

Copper cathode is a high-purity form of copper that is produced through the electro refining process. It is a rectangular plate of copper with a purity level of 99.99% or higher. Used in various industries such as construction, and manufacturing.

Copper cathodes are high-purity copper metal sheets produced through an electrolytic refining process. They are widely used as a primary raw material in electrical, construction, and industrial manufacturing sectors.

Copper cathodes are flat rectangular sheets of refined copper (usually 99.99% purity) obtained after the electro-refining process of copper ore.

They are the starting point for producing:

Copper rods
Copper wires & cables
Copper tubes & pipes
Electrical components

Industrial versatility

Used in:

Electrical wiring
Power generation systems
Electronics manufacturing
Construction materials

Copper cathode is a high-purity form of copper produced through electrolytic refining, used as a raw material in the production of copper products, wires, and alloys. It is a key intermediate product in the copper industry.

A copper ingot is a purified, solid rectangular block of copper, typically weighing 25-35 kg, produced by casting molten copper into molds for easy transport, storage, and industrial processing. Due to high electrical/thermal conductivity and corrosion resistance, they are primarily used to manufacture copper wire, pipes, alloys, coins, and construction materials.

We also Offer
Copper Powder
Copper Plate

Please note: for price quotation, send us a message.

Thank you

Copper slag, obtained from copper smelting, is used widely due to its abrasive and stabilizing characteristics.

Uses:
Abrasive blasting
Concrete aggregates
Road construction
Filtration media

Incoterms - CIF and FOB
Product origin - INDIA
Minimum Order Size: 1 FCL
Price - Keeps Fluctuating (To be discussed)
Packaging details - Customised packing

Classification : Copper Pipes
A type of non-ferrous metal pipe, often divided into brass and copper pipes, is pressed and drawn seamless pipe. Copper pipe has good electrical conductivity, thermal conductivity characteristics, electronic products of conductive parts and heat dissipation parts of the main material, and has become a modern contractor in all residential commercial housing water pipeline, heating, cooling pipe installation of the first choice. Copper pipe has strong corrosion resistance and is not easy to oxidize.

Classification : Copper Bar
Copper bar is a kind of non-ferrous metal processing bar, has better processing performance, high conductivity. Mainly divided into brass rod (copper zinc alloy, less expensive), purple copper rod (higher copper content).

Classification : Copper Coil
Copper coil is a highly stable, low maintenance roofing and curtain wall material that is environmentally friendly, safe to use, easy to process and highly resistant to corrosion. Copper coil classification: aluminum bronze coil, brass coil, beryllium bronze coil, tungsten copper coil, copper coil and so on.

Commonly used copper coil brands: H62, H65, H68, H70, H80, H90, C2600, C2680, C2700, C5210, etc.

Classification : Copper Sheet
Copper sheet is a highly stable, low-maintenance roofing and curtain wall material that is environmentally friendly, safe to use, easy to process and highly resistant to corrosion.

Aluminum bronze, tin bronze, silicon bronze, beryllium bronze, red copper, brass, white copper, tungsten copper, red copper, oxygen free copper.

Copper plate classification: aluminum bronze plate, brass plate, tin bronze plate, silicon bronze plate, beryllium bronze plate, tungsten copper plate, purple copper plate, red copper plate, oxygen free copper plate, various specifications/models of copper plate.

Classification : Copper Wire
Copper wire A metallic conductive material. The main material is copper metal. Generally used in industrial construction.

For the miscellaneous requirements of our clients, we are offering a wide range of Copper Slate Tile all over the world. All these tiles are available in eye-pleasing patterns. It is also known as Copper Quartzite. It is the most famous slate stone for applications like Paving, Patios, and Wall Cladding in various forms like Tiles, Ledge stones, Strips. Due to its rustic look, copper Quartzite is also being used for flooring, wall cladding, countertops, paving etc.
Specifications:
Sizes:
300 x 300 mm, 400 x 400 mm
300 x 600 mm, 600 x 600 mm
12â?? x 12â??, 24â?? x 12â??, 16â?? x 16â??

Thickness:
10-20 mm
10 mm calibration
15 mm calibration

Finishes:
Both sides natural split surface
Top Natural & Bottom Calibrated
Polished

Edges:

Machine Cut & Tumbled

Products:

Tiles, Flagstone, Crazy Paving

Applications:

Flooring, Wall cladding, Pool Coping, Pool Surrounds
Request
Callback


Additional Information:

Pay Mode Terms: L/C (Letter of Credit),D/P,T/T (Bank Transfer),Other
Minimum Order Quantity: 650 Square Feet/Onwards
Port of Dispatch: Mundra Port Pipavav Port
Production Capacity: 2000 Square Meter per Month
Delivery Time: 20 Days on Port
Packaging Details: For 30x30, 40x40cm - Box Packing For 30x60, 60x60cm - Wooden Crates

Material Natural Stone
Finish Natural
Thickness 14mm+

We are the manufacturer & supplier of Copper Mosaic Tiles. It is available in different finishes & sizes.

We supply Rainbow Mosaic Tiles with the following specifications:
Size : 12"x12"
Thickness : 14+ mm

Finishes available:
Natural
Natural Tumbled