Features:
100/1000BASE-T1 via Marvell 88Q2112 PHY
DC Voltage Requirements: 4.5-40Vdc
Item will require the following items to work fully: Software, Cables, USB C cable
Items Included:
Intrepid Rad Moon 2 Media Converter
Cable W/ power connector on one end
4500 units available
XH-FSW-8-8 rack-mounted optical switch is a kind of functional device,with the ability of controlling and switching optical route. It can be manually selected from front panel or controlled via RS232 port, Ethernet port and auto-scanned on certain frequency. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-spot optical sensors monitoring system.
Features:
Low insertion loss, Fast switching
SerialNet, High Reliability, High Stability
LED display panel. Visual display, Convenient operation.
Transparent transmission signal. High stability and reliability.
Channel and time interval of automatic scanning can be set up.
RS232 Control and Ethernet Remote Management
Applications:
FITL
Automatic Measurement
Optical Network Remote Monitoring
Cable Monitoring and Maintaining system
Specifications
Parameters Unit Indicators
Channel No. 8-8
Wavelength Range nm 1260~1650
Test Wavelength nm 1310/1550
Insertion Loss dB 2.5 dB
Repeatability dB 0.04
Return Loss dB 50
Crosstalk dB 55
WDL dB 0.50
PDL dB 0.1
Optic Power mW 500
Fiber Type SM 9/125um
Connector FC/APC
Monitoring Port RJ45 RS-232
Working Power Supply Plug-type V
AC:100ï½? 240 (50/60Hz)
Power Consumption W 30
Operating Temperature -10 60
Size mm 4U:483 x 500 x 178
XH-FSW-24X24 matrix rack optical switches is a product that uses optical switches to realize optical path conversion. The device provides serial port RS-232 and Ethernet RJ45 interface, through the TCP/IP protocol connection to send commands to control optical path switching, and finally realize 24 (input) Ã?? 24 (output) full-switching non-blocking two-way fiber-optic routing Cross-connect plays an important role in optical communication applications. Optical switches are mainly used in multi-channel optical monitoring in optical transmission systems, automatic switching of LAN multi-light sources/detectors, and optical sensing multi-point dynamic monitoring systems; optical testing systems are used for optical fibers, optical devices, networks and field engineering optical cables Testing; Optical device assembly and adjustment
Features
(1) Ethernet port, serial port communication interface command control.
(2) full switching non-blocking two-way cross connection.
(3) Equipped with LC Seiko flange, the insertion loss is small.
(4) Small insertion loss, fast switching speed, high signal stability, no crosstalk on adjacent channels
parameter
Parameter Parameter Values
Model XH-FSW-24X24-Q
Wavelength Range 1260~1650nm
Insertion Loss 1.2 dB
Repeatability 0.02 dB
Return Loss 50 dB
Crosstalk 70 dB
WDL 0.25 dB
PDL 0.05 dB
Fiber Type SM 9/125um
Lifetime 107
Switching Time 15ms(Adjacent channel)
connector FC\PC
control RJ45 RS-232
Operating power AC 100~240V
Operating Temperature -10 ~ +60
Storage Temperature -40 ~ +85
Dimension 19 4U 483 X 600 X 178
XH-FSW-1X200 rackmount optical switch is a kind of optical path control equipment, which can control optical path manually, proximity and remote via keypad, serial communication and Ethernet communication. The FSW-1X200 rackmount optical switch is a kind of optical path control equipment, which can control optical path switching manually, near-range and remotely through keypad, serial communication and Ethernet communication. It plays an important role in optical communication applications. Optical switches are mainly Optical switch is mainly used in optical transmission system for multiple optical monitoring, LAN multiple light sources / detectors automatic switching and optical sensing multi-point dynamic monitoring The optical switch is used in optical fiber, optical device, network and field engineering optical cable testing; optical device installation and adjustment.
Features
(1) With small insertion loss and fast switching speed, etc.
(2) The internal circuit of the optical switch is self-detecting, and the fault alarm informs.
(3) The serial port adopts FT-232 industrial-grade USB to RS-232 chip.
(4) LCD display is adopted to display the status of the optical circuit very intuitively, which is convenient for the userâ??s operation.
(5) Can send commands through the key and serial port, network port to control the light path switching settings. And the key operation can be locked through the serial command.
Performance
Parameter Parameter Values
Model XH-FSW-1XN-U
Wavelength Range 1260~1650nm
Insertion Loss 1.2 dB
Repeatability 0.02 dB
Return Loss 50 dB
Crosstalk 70 dB
WDL 0.25 dB
PDL 0.05 dB
Fiber Type SM(9/125um)
connector FC\PC
Monitoring port RJ45,RS-232
Operating power AC:100~240V
Operating Temperature -10 ~ +60C
Operating Temperature -40 C ~ +85 C
Dimension 19 1U(483 X 230 X180)
1 128 rack-mounted optic switch is a kind of functional device,with the ability of controlling and switching optical route. It can be manually selected from front panel or controlled via RS232 port, Ethernet port and auto-scanned on certain frequency. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-spot optical sensors monitoring system.
Features
Low insertion loss, Fast switching
SerialNet, High Reliability, High Stability
LCD display panel. Visual display, Convenient operation
Transparent transmission signal. High stability and reliability
Channel and time interval of automatic scanning can be set up
RS232 Control and RJ45 Ethernet Remote Management
Applications
FITL
Automatic Measurement
Optical Network Remote Monitoring
Cable Monitoring and Maintaining system
Parameters
Parameters
Unit
Indicators
Unit Type
XH- FSW-1X128
Wavelength Range
nm
1250~1700nm
Test Wavelength
nm
1550nm
Insertion Loss
dB
Typ. 0.8dB,Max. 1.5 dB
Repeatability
dB
0.02
Return Loss
dB
50
Crosstalk
dB
70
WDL
dB
0.25
PDL
dB
0.05
Optical Power
mW
500
Switching Time
ms
12 ms adjacent channel
Fiber Type
um
9/125
Connector
LC/PC
Monitoring Port
RJ45 & RS-232
Working Power Supply
Plug-type
1 128 rack-mounted optic switch is a kind of functional device,with the ability of controlling and switching optical route. It can be manually selected from front panel or controlled via RS232 port, Ethernet port and auto-scanned on certain frequency. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-spot optical sensors monitoring system.
Features
Low insertion loss, Fast switching
SerialNet, High Reliability, High Stability
LCD display panel. Visual display, Convenient operation
Transparent transmission signal. High stability and reliability
Channel and time interval of automatic scanning can be set up
XH-OSW-2X2B bypass mechanical optical switch is a kind of optical path control device, which has the function of controlling the optical path and converting the optical path; it can realize that the whole optical path cannot communicate normally when the power failure occurs at a certain point of the single-fiber multi-point equipment. Bypassing the power-off point, the optical path can operate normally. It plays an important role in optical communication applications. Optical switches are mainly used in multi-channel optical monitoring in optical transmission systems, LAN multi-light source/detector automatic switching, and optical sensing multi-point dynamic monitoring system optical test systems for optical fibers, optical devices, networks and field engineering optical cables Test; optical device installation and adjustment.
Features
Low insertion loss, wide wavelength range
Low channel crosstalk, high stability, high reliability
Simple control, small size, easy to embed in the circuit board
Locking and non-locking control types can be selected
Performance
Parameter Parameter Value
Model XH-OSW-2X2B
Insertion loss dB Typ 0.5 Max 1.0
Wavelength Range nm 800~1310 & 1260~1650
Working Wavelength nm 850/980/1310 & 1310/1550/1625
Return Loss dB MM 30 & SM 50
Channel Crosstalk dB MM 35 & SM 55
PDL dB 0.05
WDL dB 0.25
TDL dB 0.25
Repeatability dB ±0.02
Switching Times Times 107
Switching Time ms 8
Transmission Power mW 500
Operating Voltage V 3 or 5
Operating Temperature -20~+70
Storage Temperature -40~+85
Package Cize mm (L)27.0 (W)12.5 (H)8.4 ±0.2
XH-OSW-2X2F optical switch is a kind of optical path control device, which has the function of controlling the optical path and converting the optical path; it can realize the two-way direct and cross function of the optical path. It plays an important role in optical communication applications. Optical switches are mainly used in multi-channel optical monitoring in optical transmission systems, LAN multi-light source/detector automatic switching, and optical sensing multi-point dynamic monitoring system optical test systems for optical fibers, optical devices, networks and field engineering optical cables Test; optical device installation and adjustment.
Features
Low insertion loss, wide wavelength range
Low channel crosstalk, high stability, high reliability
Simple control, small size, easy to embed in the circuit board
Locking and non-locking control types can be selected
Performance
Parameter Parameter Value
Model XH-OSW-2X2F
Insertion loss dB Typh 0.5 Max 1.0
Wavelength Range nm 800~1310 & 1260~1650
Working Wavelength nm 850/980/1310 & 1310/1550/1625
Return Loss dB MM 30 & SM 50
Channel Crosstalk dB MM 35 & SM 55
PDL dB â?¤0.05
WDL dB â?¤0.25
TDL dB â?¤0.25
Repeatability dB ±0.02
Lifetime Times 107
Switching Time ms 8
Transmission Power mW 500
Operating Voltage V 3 or 5
Operating Temperature -20~+70
Storage Temperature -40~+85
Dimension mm (L)27.0 (W)12.5 (H)8.4 ±0.2
Mechanical Optical Switch Module XH-OSW-1X12 is an optical path control device, with the role of controlling the optical path and converting the optical path, the size of this module can be up to 12 channels; can achieve multiple optical signal input, select the signal output of one of the channels or vice versa (to support bidirectional use), the module control mode using TTL high and low logic level control, the microcontroller chip pins can be directly driven control. It has an important role in optical communication applications. Optical switch is mainly used in optical transmission systems for multiple optical monitoring, LAN multi-source / detector automatic switching, and optical sensing multi-point dynamic monitoring system optical test systems for optical fiber, optical devices, networks and field engineering optical cable testing; optical device mounting.
Features
hLow insertion loss, wide wavelength range
Low channel crosstalk, high stability, high reliability
Imported motor components, higher reliability of life
Failure self-test function in internal circuit design
Simple control mode, small size, easy to embed in the system
Parameter
Parameter Parameter value
Model XH-OSW-1XN N 12
Insertion loss dB Typical value: 0.5 Maximum value: 0.8
Wavelength range nm 800~1310 1260~1650
Working wavelength nm 850/980/1310 & 1310/1550/1625
Return loss dB Multimode 30 & single mode 50
Channel crosstalk dB 70
Polarization dependent loss dB 0.05
Wavelength dependent loss dB 0.25
Temperature dependent loss dB 0.25
Repeatability dB 0.02
Switching times Times >107
Switching time ms 8
Transmission power mW 500
Power supply V/mA 5/600
Operating temperature -20~+80
storage temperature -40~+85
Package size mm 80 40 32
XH-OSW-1 128 mechanical optical switch is a kind of light path control equipment.
It can realize multi-channel fiber optic light path switching. In the optical
fiber transmission system, it is used for multi-channel fiber monitoring,
multi light source/detector selection, and optical fiber path protection etc.
Besides, it is also used in optical fiber test system for optical fiber and
related component test, outdoor cable test and multi-spot optical sensors
monitoring system.
Feratures
Low Loss and High Reliability
Parallel Interface (TTL)
Modularized Design
Epoxy-free on Optical Path
Drive Circuit Breakdown Self-checking Function
Applications
Ring Network
Remote Monitoring in Optical Network
Testing of Fiber Optical Component
2134 Converters Switches Suppliers
Short on time? Let Converters Switches sellers contact you.
