Find Verified Construction Waterproofing Chemicals Suppliers, Manufacturers and Wholesalers

Pellets are small balls of iron ore used in the production of steel. They are made with technology that uses the powder that is generated during the ore extraction process, once considered waste.

The pellets are used in the production of steel which is used in the construction of bridges, cars, planes, bicycles, household appliances and much more.

Waterproof Plasterboard technical parameters

Standards (GB/T9775-1999)

Water Proof Gypsum Plasterboard-specifications
Dimension(mm)
depth: 9.5, 12, 15,
width:1200, 1200, 1200,
legnth:3000, 3000, 3000,
weight(kg/m2):8.3,9.7,12.6,
Simple packing specification
No.s: 100,80,60,
area(m2):360,288,216,
weight(ton):3.08,2.90,2.86,
Standard of loading
No.s:76,60,50,
area(m2):273.6,216,180,
weight(ton):2.42,2.27.2.50

Iron Ore Pellets:
Pellets are small balls of iron ore used in the production of steel. They are made with technology that uses the powder that is generated during the ore extraction process, once considered waste.
The pellets are used in the production of steel which is used in the construction of bridges, cars, planes, bicycles, household appliances and much more.

Product Type: IRON ORE PELLETS
Fe (T) 64 %
Si02 1.150 %
Fe0 0.75 Max
Ti02 0.021%
Al2O3 0.319 %
Ca0 1.170 %
P 0.032 %
S 0.031 %
V205 0.004 %
Cu 0.057 %
N2O 1.290 %
Mg0 0.069 %
CCS 309
Size 16-19 mm - 7 %
09-16 mm -91 %
06-09 mm 2 %
Tumbler Index- for above 6.3 mm 96.2 % -� 95 % min
Abrasion Index â??for 0.5 mm 3.8 % - � 4 % max
Sticking Index @950 deg C 20.1 %
Bulk Density 2.17 %
Compression Strength 270 Kg / Pellet � / � 150 kg / pellet
Fines below 5mm (-) 5 mm 3 % max
Reducibility index 55-65 %

Good condition filtration press made ny German MSE Filterpress GmbH in year 1997. The press has 33 plates of size 630 x 630 mm, cace thickness 25 mm. Includes own hydraulic system and control cabinet.

The equipment is manufactured by German MSE Filterpress GmbH, year 1997. Manufacturer’s type KFP 630-40-25K-MPN+DLMP. Structure is made on normal construction steel, plate size is 630 x 630 mm. The filter plates are pressed with single acting hydraulic cylinder with inbuilt hydraulic pump-motor. Product is fed in a central sludge feed inlet with flange connection and each pressing unit has its own outlet for the liquid filtrate which is them collected in one outlet channel. The cake will be disposed under the press. The unit has its own control panel attached to the equipment.

Technical data:
Manufacturer: MSE Filtterpress GmbH
Year of manufacture: 1997
Manufacturers type: KFP 630-40-25K-MPN+DLMP
Plate size: 630 x 630 mm
Number of plates: 33
Cake thickness: 25 mm
Hydraulic pressure: 380 bar max
Filtration pressure: 15 bar.

This Powerpak 660 horizontal thermoforming machine (form/fill/seal) is manufactured by German Tiromat Krämer+Grebe GmbH & Co in 1998. It is designed for high capacity packing of various products in food and pharmaceutical industry. This unit has been packing bread in to vacuum pack and it is equipped with a three head hot foil printer, 2- gas mixing device for CO2 injection, separate vacuum pump, cross- and longitudinal cutters and water cooled upper cover of the forming unit. Construction material is food quality stainless steel and equipment is controlled with PC-programmable Tiromat Control Unit.

This unit has very little operation hours - estimated total 3000 hours - and therefore it is in excellent condition. Operating and service manuals in English, Finnish and German and machine comes with the CE-certificate.


Machine type:Powerpak 660
Machine number:665/0211
Manufacturing year:1998
Foil type:Flexible
Formatting width:430 mm
Film type used:PS-PE 450/50
Max formatting depth:40 mm
Forming dies:223-3,1
Capacity:10 phases / min
Control unit:Tiromat
Ho foil printer:SC-700 with 3 printing units
Overall length:7.30 meters
Overall width:1.15 meters
Height:1.85 meters
Nominal power need:50 A / 380 V / 50 Hz.

The equipment is designed and manufactured by Gough & Co Ldt, UK in year 1999 / installed in 2000, manufacturer’s type single deck Vibracon GVF4. We have totally 3 identical units which were dismantled in 2007 and all of them are in very good operational condition. These are single deck circular screen design for high velocity scalping, de-watering or single deck separation in chemical and pharmaceutical industry. (These units were screening oversized particles in PVC - granulate factory truck loading station) The perforated screen and all product touching parts are made on stainless steel AISI 304L. Top deck houses the screen and the discharge spout for oversize particle removal is fitted to it. Top deck is supported with mechanical spring and vibration movement is created by two contra rotating vibrating motors on the outside of the unit so there are no internal working parts. Vibration power can be adjusted.

Technical data:
Type: Vibracon GVF 4
Material: AISI 304L – product touching parts
Perforated screen: Mesh size 4 mm
Screen diameter: 1100 mm
Screen area: 9500 cm2
Vibrators: 2 x 0.52 kW units.

Industrial Crane Konecranes CTX 10 t, Dual Bridge with 33.6 m span

The crane was manufactured by Konecranes Oyj in 2001 and the operation was stopped in year 2006. The equipment was regularly serviced by the manufacturer and is thus in excellent operating condition. The crane is still installed in its original place and can be tested on any time. The double bridge is welded housing construction equipped with one double speed wire hoists and a motorized rail equipment on both ends. The crane has both the local wire connected control unit as well as the wireless remote controller. On the bridge there is a service platform and the local LV û and control cabinet. All electric motors are dimensioned in accordance with Industrial Heavy Duty ED classification. The equipment includes the crane moving rail which will be sold separately.

Technical data:
Manufacturer's type:CXTD10t x 33.6m Hol: 6.1m
Lifting capacity:10 000 kg
Span distance:33.55 m
Lifting class:FEM M5 (2m)
Bridge structure:Welded case
Total weight:Approx 22 000 kg
Type of wire hoist:XL 404N40BDA4
Lifting height:6.1 m
Lifting speeds:8.0 and 1.3 m / min
Wire hoist speeds:32 and 8 m / min
Bridge speed:Inverter controlled, max 40 m / min
Wire hoist lifting motor:Double power 15 and 2.5 kW (60% ED)
Wire hoist moving motors:2 x 0.65 kW (40% ED)
Bridge moving motors:2 x 1.8 kW (40% ED)
Total power need:19.9 kW / 400 V / 50 Hz
Crane moving rail:60 x 40 cm, length 2 x 140 m.

Totally two identical 145 kW wind turbine units, made in 1988 by Danish A/S Nortank, total operating hours approx 75000. The equipment have been dismatled since 2008 and inspected and serviced for operation condition and they are ready for immediate delivery

We have totally 2 units of uninstalled complete wind turbines manufactured by Danish A/S Nordtank in year 1988, manufactures type NTK 130 with rated power of 2 x 145 kW. The mills are in good operational condition and ready for immediate shipment. The hubs are heat treated MEEHANITE hubs made by company SABROE and are equipped with cast iron construction which allows adjustment for blade pitch angle. The blades are made by Danish company LM- Glasfiber, material is glass fiber reinforced polyester and they have self-supporting structure with bushing roots. The blades have also hydraulically activated tip brakes which automatically rotate the tips to a 90 degree break angle when wind is lost or it can be used for maintenance stoppage. The gear box in made by German Lohman & Stolterfoht and it is two step planetary gear type with high AGMA rating of 302 kW. The break system is 100% fail safe Nortank’s own hydraulically / mechanically activated brakes. Both units have they own Motorola 6809 multi-microprocessor operated control units which are housed in dust proof steel cabinets.

More information on requests, for spam protection please introduce yourself properly.

Main data of one mill:
Manufacture’s type: NTK 130F/LM
Year of manufacture 1988
Total operating hours: approx. 75000
Rated capacity, max: 145 kW
Number of blades: 3 pcs
Rotor diameter: 22 m
Rotor speed: 44.5 rpm
Cut-in wind speed: 4.0 m/sec
Cut-out wind speed: 53 m/sec (120 mph)
Hub height: 26 m
Generator: ASEA 145 kW / 1500 rpm / 50 Hz
Blade type: LM 9.7 m H/H/T diam. 21 m
Gear box type: Lohman & Stolterfort GPC 145
Clutch type: Lohr & Brokamp Universal Joint No 105
Total weight: 15200 kg.

e equipment was manufactured by Jeffrey Rader AB, Sweden in 1995 and it is in very good operational condition. It consist of two heavy duty rolls with removable profilied surfaces which rotate towards each other and presses overzised wood chips between the profiles. Roll drives 2 x 110 kW / 1500 rpm connected with two gearboxes. Hydraulic pump 7.5 kW, capacity 220 m3/h wood chips.

The equipment was manufactured by Jeffrey Rader Inc, Sweden in year 1995, manufacturers type is DynaYield 80-300 and it is in good operational condition. The Chip Conditioner consists of two heavy duty rolls with removable profiled surfaces. They rotate towards each other and pull the oversize chips between them. The profiled surfaces are aligned so that the pyramid apexes on one roll travel in the valleys of the apexes on the adjacent roll. With normal oversize wood, the Conditioner typically generates less than 1% fines and 3% pins
The normal application for the Chip Conditioner is in a chemical pulping process, processing the oversize materials by fissuring the wood chips parallel with the grain to allow the cooking liquors to penetrate the chip, and allow the oversize chip to cook as an acceptable size chip. Another application is in a thermo-mechanical pulping process (TMP), as a preconditioning
An important feature of this machine is its ability to handle small portions of tramp without going off-line. With the so called Dynagage Conditioner, the dynamic roll is allowed to move away from the static roll, and once the tramp is through the unit, the roll automatically moves back to the proper set point without shutting down the flow and together with slow rotation speed enable were low down time and maintenance costs. Roll distance movements are made with a hydraulic system build on the equipment and controlled by 3 position sensors
More information on requests, for spam protection please introduce yourself properly.

Technical data:
Model: RDY 80-300
Manufacturing year: 1995
Capacity (throughput): 220 m3/h loose wood chips
Press roll diameter: 915 mm
Roll length: 2440 mm
Roll motors: 2 x 110 kW / 1500 rpm / 690 V – 50Hz
Press distance between the rolls: 2.2 mm
Gearboxes: 2 x Kipo Benzler TV 512
Hydraulic pump: Rexroth 200 bar with Mecman syliders
Electric motor for hydraulic pump: ASEA 7.5 kW
Weight: 33 000 kg
Length: 5083 mm
Width: 2550 mm
Height: 2400 mm.

Common Gypsum Plasterboard
Technical parameters Standards(GB/T9775-1999)

Common Gypsum Plasterboard-specifications
dimension(mm)
depth: 9.5, 12, 15,
width:1200, 1200, 1200,
legnth:3000, 3000, 3000,
weight(kg/m2):7.2,9.0,11.5,
Simple packing specification
No.s: 100,80,60,
area(m2):360,288,216,
weight(ton):2.67,2.69,2.61,
Standard of loading
No.s:76,60,50,
area(m2):273.6,216,180,
weight(ton):2.1,2.1.2.28

Certificate of quality
Fineness % +-10.0
Initial setting time h:min +-0:45
Final setting time h:min +-10:00
Soundness Mum +-5.0
So3 % +-3.5
Mgo % +-5.0
Loss on ignition % +-5.0
Bending strength mpa +-6.5
Compressive strength mpa +-42.5



1ton/big bag