OMG's in-vehicle high-voltage cables are manufactured in accordance with the international standard ISO 19642 and are certified by E-MARK, a certification system for vehicle components and system parts issued by the Economic Commission for Europe (ECE), which imposes stringent requirements on safety and environmental protection and applies to the whole world, including non-European Union countries. Products that have passed this certification are recognised by ECE member countries in terms of quality and are more accepted by the European market.
OMG's ISO 19642 high voltage cables are rated between -40 +(125 , 150 ), the insulation material is XLPE, and all the materials used are in accordance with RoHS 2.0 & REACH environmental standards. It is not only soft, abrasion-resistant, oil-resistant, acid and alkali resistant, but also has excellent anti-cracking properties and electrical conductivity, and the temperature rise of the conductor under the rated current in room temperature test does not exceed 30.
In addition, the cable flame retardant grade VW-1, and in -40°C/4H low-temperature winding test, the cable surface does not crack, no cracks, can pass the thermal overload of the cable temperature resistance grade +50 , has a better flame retardant properties and high and low temperature resistance, to achieve the cable to withstand the use of various types of environments in the car.
OMG' has the R&D spirit of "Green Innovation", and has been deeply cultivating in the field of new energy vehicle cables for many years, with experienced and mature team and technology. Our high-voltage cables can be used as the main carrier of electric vehicle power output, providing high-voltage power supply to ensure the performance and safety of the whole vehicle.
OMG' European standard AC charging cables are manufactured with reference to EN 50620:2017 and IEC 62893-3:2017 dual standards, and DC charging cables are manufactured with reference to IEC 62893-4-1:2020 standards, and are certified by DEKRA and TUV. AC charging cables also include spring cable series, providing more choices for charging application scenarios.
The environmental factors in charging cable applications are complex and varied, and it is difficult to avoid frequent stretching, bending or crushing of cables by vehicles during use. This requires charging cables to have special properties such as oil and water resistance, acid and alkali resistance, high and low temperature resistance, UV resistance, etc. and mechanical properties such as resistance to extrusion, bending and dragging, etc. OMG' has strict technical requirements for its products, and the electrical properties, structural dimensions, insulating properties, sheaths, and finished products of the European standard charging cables have gone through a series of well-established tests, to ensure the safety and reliability of the products.
As an outstanding international company, OMG' provides each customer with electric vehicle charging cable solutions that meet their actual needs, thanks to its experienced technical team and its high demand for product quality.
OMG' EV cable features:
1. Conforms to the standards for cables in each region.
2. Technological innovation. Liquid-cooled high-voltage cables and liquid-cooled charging cables can well help electric vehicles realize efficient and safe charging.
3. In addition to regular products and specifications, we can customize EV charging solutions according to customer specific needs.
4. Don't worry about the price. Our price and quality will satisfy you.
We are a professional lithium ion power pack manufacturer from China, we produce compatible and usable custom li ion battery packs with Craftsman, Dongchengi, Milwaukee, Dyson, DeWalt and other international brands. Our products are exported to Europe, America, Southeast Asia, Oceania, Russia and so on.
162238 Communication Suppliers
Short on time? Let Communication sellers contact you.
CE certificated, RoHS compliant.
Automatic Constant Feed Speed Control: Automatic output voltage adjustment in real-time to ensure constant preset feed speed regardless of weight change of the workpieces.
Automatic Frequency Adjustment: Automatic output frequency adjustment in real-time to make sure the load is always working at its resonant frequency.
Automatic Resonant Frequency Search: Search out and output the resonant frequency of the load. other related parameters are also set automatically
Counting: Count the number of the workpieces. The controller will slow down or stop when counting up to the preset value. (available on SDVC34MRJ)
Rs485 Communication: All parameters of the controller can be adjusted via R485.
Automatic Switch Sensor Type Recognition: The controller can recognize and adapt to both PNP and NPN-type switch sensors
Sync Output: Sync the output waveform of the slave controller with that of the master controller to the same frequency and phase to avoid the beat effect
Overvoltage Protection: If the input voltage is too high, the power supply of the controller will be shut down automatically to protect itself.
Digital Overheat Protection: If the internal temperature of the controller gets too high, the controller will stop its output to protect itself.
Overcurrent Protection: If output current exceeds its rated value the controller will stop its output to protect itself and the load.
Restorable Short Circuit Protection: If the output of the controller is short-circuited, the controller will shut down its output to protect itself and the load. But the fuse inside will not be blown. So when there is no short circuit at the output side, the controller will work again after power is on.
Frequency Adjustment: The controller's output frequency can be manually adjusted to the vibratory feeder's resonant frequency to achieve a smooth, quiet, and energy-saving feed effect.
Automatic High Precision Voltage Regulation: The internal digital voltage regulation circuit can eliminate feed speed variation caused by mains voltage fluctuation.
Time Adjustable Soft Start: When powered on, the controller will gently increase output voltage from 0 to the preset value to avoid a sudden shake. The soft start time can be digitally preset.
Switch Sensor ON/OFF Control NPN switch sensor or PLC can be connected to turn the controller on/off.
Photoelectric Sensor ON/OFF Control: The CUH Intelligent Photoelectric Sensor can be connected to turn the controller on/off.
Remote Speed Control: Output Voltage of the controller can be adjusted remotely by an external potentiometer, a PLC, or a 1-5V DC signal.
DC Control Output: The controller can output low voltage DC power associated with the ON/OFF Control of the controller to drive a solenoid or other external devices.
Keypad Lock: Lock all buttons on the keypad to prevent misoperation by pressing the ON/OFF button and holding for 2 seconds.
Digital Overheat Protection: If the internal temperature of the controller gets too high, the controller will stop its output to protect itself.
Overcurrent Protection: If the output current exceeds its rated value, the controller will stop its output to protect itself and the load.
Restorable Short Circuit Protection: If the output of the controller is short-circuited, the controller will shut down its output to protect itself and the load. But the fuse inside will not be blown. So when there is no short circuit at the output side, the controller will work again after power is on.
Max Adjustable Output Voltage: Max Adjustable Output Voltage can be preset to protect the load from damage caused by too high voltage.
Frequency Adjustment: The controller's output frequency can be manually adjusted to the vibratory feeder's resonant frequency to achieve a smooth, quiet, and energy-saving feed effect.
Automatic High Precision Voltage Regulation: The internal digital voltage regulation circuit can eliminate feed speed variation caused by mains voltage fluctuation.
Time Adjustable Soft Start: When powered on, the controller will gently increase output voltage from 0 to the preset value to avoid a sudden shake. The soft start time can be digitally preset.
Switch Sensor ON/OFF Control NPN switch sensor or PLC can be connected to turn the controller on/off.
Photoelectric Sensor ON/OFF Control: The CUH Intelligent Photoelectric Sensor can be connected to turn the controller on/off.
Remote Speed Control: Output Voltage of the controller can be adjusted remotely by an external potentiometer, a PLC, or a 1-5V DC signal.
DC Control Output: The controller can output low voltage DC power associated with the ON/OFF Control of the controller to drive a solenoid or other external devices.
Keypad Lock: Lock all buttons on the keypad to prevent misoperation by pressing the ON/OFF button and holding for 2 seconds.
Digital Overheat Protection: If the internal temperature of the controller gets too high, the controller will stop its output to protect itself.
Overcurrent Protection: If the output current exceeds its rated value, the controller will stop its output to protect itself and the load.
Restorable Short Circuit Protection: If the output of the controller is short-circuited, the controller will shut down its output to protect itself and the load. But the fuse inside will not be blown. So when there is no short circuit at the output side, the controller will work again after power is on.
Max Adjustable Output Voltage: Max Adjustable Output Voltage can be preset to protect the load from damage caused by too high voltage.
Frequency Adjustment: The controller's output frequency can be manually adjusted to the vibratory feeder's resonant frequency to achieve a smooth, quiet, and energy-saving feed effect.
Automatic High Precision Voltage Regulation: The internal digital voltage regulation circuit can eliminate feed speed variation caused by mains voltage fluctuation.
Time Adjustable Soft Start: When powered on, the controller will gently increase output voltage from 0 to the preset value to avoid a sudden shake. The soft start time can be digitally preset.
Switch Sensor ON/OFF Control NPN switch sensor or PLC can be connected to turn the controller on/off.
Photoelectric Sensor ON/OFF Control: The CUH Intelligent Photoelectric Sensor can be connected to turn on/off the controller.
Remote Speed Control: Output Voltage of the controller can be adjusted remotely by an external potentiometer, a PLC, or a 1-5V DC signal.
DC Control Output: The controller can output low voltage DC power associated with the ON/OFF Control of the controller to drive a solenoid or other external devices.
Keypad Lock: Lock all buttons on the keypad to prevent misoperation by pressing the ON/OFF button and holding for 2 seconds.
Digital Overheat Protection: If the internal temperature of the controller gets too high, the controller will stop its output to protect itself.
Overcurrent Protection: If the output current exceeds its rated value, the controller will stop its output to protect itself and the load.
Restorable Short Circuit Protection: If the output of the controller is short-circuited, the controller will shut down its output to protect itself and the load. But the fuse inside will not be blown. So when there is no short circuit at the output side, the controller will work again after power is on.
Max Adjustable Output Voltage: Max Adjustable Output Voltage can be preset to protect the load from damage caused by too high voltage.
18650 li ion rechargeable battery for power tools, full capacity, high cycling, low internal resistance and
ultra-low self-discharge to meet the requirements of your power products.
Resin 3D printers have gained significant popularity due to their capability to create highly precise, isotropic, and watertight components using a variety of advanced materials, characterized by intricate details and a polished surface finish. This method of printing is particularly suitable for applications that demand stringent tolerances and smooth finishes, including rapid prototyping, tooling, manufacturing aids, models, and low-volume end-use components.
The Chinese large-size industrial-grade SLA Stereolithography 3D Laser Printer utilizes ultraviolet laser to cure resin, layer by layer, achieving high precision, smooth surface, and fast printing speed. efficiently prototypes a wide range of products with a printing size of up to 1600*1600mm.
High discharge lipo cells
Honcell provides high discharge LiPo battery cells with a range of 3-100C, suitable for RC equipment, drones, electronic tools, and more.
As a battery cells factory, we provide 6200mah 50c 3.7 v lipo pouch cells, high temperature battery cells, 11.1 v 1800mah 25c lipo battery, 11.1 v 2200mah 35c, rechargeable battery, etc. For more info, contact us.
3.2 v lifepo4 battery cell. Offering higher energy density and longer cycle life. Ideal for E-bikes, power tools, and IoT devices.
As a battery cells factory, we provide prismatic lithium ion cells lifepo4, prismatic lithium iron phosphate cells, 14500 li ion cells, 18650 li cell, 14500 protected lithium ion battery cell, rechargeable battery, etc. For more info, contact us.
Honcell specializes in crafting customized Li-ion battery cells tailored to your specific needs.
HCP Li-Polymer Cell
Li-ion Polymer Battery Cells. Widely used in 3C products, wearables, medical devices and IoT devices.
HCG High-Drain Li-Polymer Cell
Honcell provides high discharge LiPo battery cells with a range of 3-100C, suitable for RC equipment, drones, electronic tools, and more.
HCF LiFePO4 Cell
3.2V LFP battery cells. Offering higher energy density and longer cycle life. Ideal for E-bikes, power tools, and IoT devices.
Lithium battery ups for home are promising alternative to traditional lead-acid batteries due to their higher energy density, longer cycle life, and lower self-discharge rate. We can customize lithium battery solutions to replace lead-acid batteries according to your needs.
UPS Uninterrupted Power Supply
Lithium-ion UPS batteries offer extended lifespan, increased energy density, and a smaller footprint, making them an excellent choice for battery backup solutions.
High energy density
The energy density of lithium lead acid replacement is 4-5 times higher than that of lead-acid batteries. Under the same capacity, the volume is reduced by 60% and the weight is reduced by 70%, making them more convenient to move, install, and maintain.
Honcell provides stable battery solutions for a variety of commercial environments such as retail, offices and warehouses to ensure stable business operations. We can also customize personalized battery solutions according to your specific needs to meet the diverse requirements of different business scenarios.
Barcode Scanner
Barcode scanners are widely employed across various industries, including retail, healthcare, logistics, and manufacturing.
High safety performance
Non-explosive, non-combustible, non-toxic, non-polluting; can be equipped with protection boards to avoid overcharging and over-discharging of the battery.
Long Life
Honcell's batteries can be cycled up to 500 times, providing long-term backup power for commercial operations.
We are a company based in Vienna, specialized in wholesale distribution. We offer a wide range of products at exceptionally competitive prices. We are open to B2B partnerships and are eager to collaborate with companies looking for a reliable sourcing partner.
If you are interested in partnering with us or would like to see our complete range of products, please feel free to contact us. Our team is available for any inquiries and will be happy to provide you with further information.
