Find Verified Fly Ash Bricks Suppliers, Manufacturers and Wholesalers

Soda ash light and soda ash dense are both available.

Magnesia brick is a kind of alkalescency refractory brick that made from the sintered magnesium with its content of 87% and that are combined with silicate. Since its combination composition is mainly cms-m2s system, its load softening temperature is low and thermal shock resistance is poor that determine its application is few. But magnesia brick is widely sued in the furnaces and kilns that have alkaline atmosphere. The essential properties of magnesia brick depends on the nature of the raw materials, the mineral composition, microstructure and closely on the density of the products.



In fumigated wooden pallet

Item Sk-32Sk-34Sk-36Sk-38
Ai2o3(%)35385070
Fe2o3 (%)32.522
Refractoriness (sk32/ 1710¡æ34/ 1750¡æ36/ 1790 ¡æ38/1800
Refractorines under load, 0.2mpa, ta, (¡ãc)1300135014501550
Porosity(%)19-2219-2320-2421-24
Bulk density (g/cm3)2.10-2.152.15-2.202.25-2.302.35-2.4
Cold crushing strength (mpa)2525-304550
Thermal expansion at 1000¡æ (%)0.60.60.3-


230*115*64mm 512pcs/plt
230*115*76mm 384pcs/plt

Products: Refractory bricks, unshaped refractory, refractory fibre, landscape brick, etc.

Our refractory brick include: fireclay brick, high alumina brick, low porosity fireclay brick, mullite brick, silica brick, zircon brick, insulating brick, alkali resistant bricks, etc.

Our landscape brick include: paving brick, water permeable brick, square brick, antique brick etc.
We have passed the evaluations of iso9001:2008 quality system certification.
And our landscape brick already export to many countries.

Landscape brick ten advantages:
1. Light flavor, quality excellent.
2. A variety of colors, elegant designs, specifications.
3. Good high temperature resistance and freeze-thaw resistance.
4. Excellent permeability, adjust air humidity, prevent the urban heat island effect.
5. Acid erosion, rain erosion resistant.
6. No radiation, no dust, no pollution, ecological environmental protection.
7. Never fade.
8. High strength, long service life.
9. Convenient construction, easy operation and easy to repair and maintain.
10. Daily cleaning is simple. High quality, Low price.

Product application:
Antique buildings, paths, traffic lanes, steps, plazas, squares gardens, courtyards, patios, etc.

Insulation brick

We have clay brick,high aluminium brick,mullite brick,diatomite brick and so on,if you need,please contact us anytime!

Application: Heating System Diameter: 6-8mm Shape: Stick Length: 10-30mm Brand Name: Din+ Wood Pellets Model Number: Wood Pellet 001 Quality Wood Pellets From Oak, Spruce , Pine And Beech Woods Specification High Quality Wood Pellets For Industrial Power And Home Heatings Quality : Din+ Quality Materials :Pure Pine Wood Moisture : 8%Max Calorie :4200-4800 Mj/Kg Ash :About 1.6% Diameter : 6mm & 8mm Length : 15mm-30mm Inner Density :1100-1300kg/M3 Min Package :15kg Plasctic Bags Or Big Bag

Application:,Heating System
Diameter:,6-8mm
Shape:,Stick
Length:,10-30mm
Brand Name:,Din+ Wood Pellets
Model Number:,Wood Pellet 001
Quality wood pellets from oak, spruce , pine and beech woods
Specification
high quality wood pellets for industrial power and home heatings
quality : din+ quality
materials :pure pine wood
moisture : 8%max
calorie :4200-4800 mj/kg
ash :about 1.6%
diameter : 6mm & 8mm
length : 15mm-30mm
inner density :1100-1300kg/m3 min
package :15kg plasctic bags or big bag.

1. Concrete water reducer: it can adsorb and disperse cement and improve various physical properties of concrete.
2. Coal water slurry additive: adding this product during the preparation of coal water slurry can improve the output of high mill, maintain the normal condition of pulping system, reduce the power consumption of pulping, increase the concentration of coal water slurry, reduce the oxygen consumption and coal consumption, improve the efficiency of cold gas, reduce the viscosity of coal water slurry and achieve certain stability and fluidity.
3. Refractory and ceramic green body reinforcer: in the manufacturing process of large-size wall and floor tiles and refractory bricks, the raw material particles of green body can be firmly bonded, and the dry green body strength can be increased by more than 20% - 60%.
4. Filler and dispersant for dye industry and pesticide processing: it can increase the color power of dyes, color more evenly, and shorten the grinding time of dyes;
5. Filler, dispersant and suspending agent in pesticide processing: greatly improve the suspension rate and wettability of wettable powder.
6. Binder for powder and granular materials: it can obtain good effects such as high strength, good stability and lubrication of molds in the balling of mineral materials.
7.Dilution dispersant and viscosity reducer in drilling: Improve the fluidity of crude oil transportation and reduce energy consumption. In petroleum products, it is used as cleaning agent, dispersant, high alkaline additive, antirust agent, antistatic agent, emulsion viscosity reducer, wax elimination and anti wax agent, etc.

1. Detailed description:
alumina cubes
The Ceramic Cube is a high-performance abrasion and impact resisting linings for high-impact, high-pressure applications in which ceramic tile may not have sufficient structural resistance, and high-performance rubber may not offer the required wear life. In extreme applications, the Cube liners can be installed in a matrix or abrasion resistant steel plate to provide structural support for the ceramic/rubber matrix and provide exceptional wear life where competing products cannot.


Used in heavy industry for years as a cost-effective, wear-resistant solution, these lightweight materials offer high durability, strength, and excellent abrasion and corrosion resistance. Alumina wear resistant compositions include:
l Alumina 92: most common wear product with great wear resistance
l Alumina 95: increased wear performance
l Alumina 96: premium alumina for best wear resistance
l Zirconium toughened alumina(ZTA):  increased strength and impact resistance

2.Product features:
> High hardness 
> Superior abrasion and impact resistance 
> Corrosion and chemical resistance 
> Light weight 
> Easy installation by epoxy resin or bolt 
> Improve your working environment-noise, vibration and safety

3. Product Specification:
- Square tile: 10x10x3~10mm, 17.5x17.5x3~15mm, 20x20x3~15mm, etc.
- Ceramic Plate: 100x100x6~50mm, 150x100x6~50mm, etc.
- Hexagonal tile: S12.5xT3~20mm, S23.5xT6-25mm
- Dimple tiles: 20x20x4-10+1(with 5 dimples), 20x30x5~15+1(with 18 dimples), 20x20x5-10mm( with 13 dimples)
- Ceramic Block: 40x40x40mm, 45x45x50mm,32x32x22mm, 38x38x38mm,etc.
- Ceramic Cylinder/rod: 6x6mm,15x15mm,20x20mm, 31x31mm,40x40mm, 45x50mm, 50x50mm etc.

5. Ceramic wear lining tiles for a variety of applications:
Processing equipment:
l Pharmaceutical clean rooms
l Food processing plants
l Grain handling
l Mineral processing
l Cement manufacturing
l Chemical processing
l Large Cyclones:
l Coal-fired power plants
l Steel Mills
l Asphalt Plants
l Petrochemical plants
l Pulp and paper mills
Category HC90 HC92 HC95 HCT95 HC99 HC-ZTA ZrO2

High alumina brick
Al2o3>80%
Bulk density>2.67g/cm3
Cold crushing strength>70mpa
Common shaped and irregular shaped.


Wooden pallets

REFRACTORY BRICK
Refractory bricks refers to the brick whose Al2O3 contains from 30% to 80%, the contains of Al2O3 from 30% to 42% is call clay bricks, the contains of Al2O3 from 45% to 80% is call high alumina bricks.
Typical Parameters

Brief description
Clay brick is refers to the Al2O3 content is 30% ~ 40% aluminum silicate. Clay brick is made of soft clay and 50% and 50% of hard clay grog, ingredients required by certain granularity, after forming, drying, burning under the high temperature of 1300 ~ 1400 .Clay brick belongs to the weak acid refractory products, can resist acid slag and the erosion of acid gases, the alkali resistance ability is a bit poor. Clay brick has good thermal shrinkage.
High Alumina Brick selected calcined Bauxite and high quality combined clay as main raw materials. After shaped with brick machine above 600tons and fired at 1450-1470 °C , we can get this product. With high Al2O3 content, the product have good high temperature performance, so it is widely used in all kinds of industrial furnace and high temperature parts to prolong the life of furnace.
Products advantage
Clay Brick
1.Good acid stability
2.Good thermal performance
3.good thermal shrinkage
4.Good resistance to abrasion and corrosion
High Alumina Brick
1. High refractoriness, High-temperature endurable.
2. Good corrosion resistance.
3. Good spalling resistance and wear resistance.
4. Good thermal shock resistance.
5. High mechanical strength.
6. High-temperature creep rate is low.
7. Good volume stability at high temperature.

Typical Application
Clay brick is suitable for secondary parts of coke oven, such as regenerator seal wall, small flue lining brick and regenerator checker brick lining brick, roof, door and rising pipe lining brick, etc.It is one of refractory brick used in blast furnaces, hot blast stove, heating furnace, power boiler, lime kiln, rotary kiln, ceramics.
High alumina brick is mainly used for masonry in blast furnaces, hot air stoves, electric furnace roof, blast furnace and reverberatory furnace, rotary kiln lining. In addition, high alumina brick also widely used for open hearth regenerative checker brick, pouring system with plug head, gate brick, etc.

Product Name THIOUREA
CAS NO.: 62-56-6

Product Description :
The product is widely used in pharmaceutical industry, agricultural, chemicals, metallurgical industry, petroleum and so on. It is also main material for producing thiourea dioxide(CH4N2O2S)
Product origin : Zibo,Shandong,China

Price of product ( USD price or FOB price) : USD1.62/kg FOB Qingdao port,China

Key Specifications/Special Features :
Content of thiourea % 99.0Min.
Loss after heated % 0.40Max.
Ash content % 0.10Max.
Water insoluble matter % 0.02Max.
Sulforhodanide (With CNSÃ??) % 0.02Max.
Melting point (â??) 172Min.

Minimum Order Size and Packgaing details :
usually packed in 25kgs polywoven bags,stacked on pallets. Also can use FIBC (jumbo bags) upon buyer's request

1. Detailed description:
alumina cubes
The Ceramic Cube is a high-performance abrasion and impact resisting linings for high-impact, high-pressure applications in which ceramic tile may not have sufficient structural resistance, and high-performance rubber may not offer the required wear life. In extreme applications, the Cube liners can be installed in a matrix or abrasion resistant steel plate to provide structural support for the ceramic/rubber matrix and provide exceptional wear life where competing products cannot.


Used in heavy industry for years as a cost-effective, wear-resistant solution, these lightweight materials offer high durability, strength, and excellent abrasion and corrosion resistance. Alumina wear resistant compositions include:
l Alumina 92: most common wear product with great wear resistance
l Alumina 95: increased wear performance
l Alumina 96: premium alumina for best wear resistance
l Zirconium toughened alumina(ZTA):  increased strength and impact resistance

2.Product features:
> High hardness 
> Superior abrasion and impact resistance 
> Corrosion and chemical resistance 
> Light weight 
> Easy installation by epoxy resin or bolt 
> Improve your working environment-noise, vibration and safety

3. Product Specification:
- Square tile: 10x10x3~10mm, 17.5x17.5x3~15mm, 20x20x3~15mm, etc.
- Ceramic Plate: 100x100x6~50mm, 150x100x6~50mm, etc.
- Hexagonal tile: S12.5xT3~20mm, S23.5xT6-25mm
- Dimple tiles: 20x20x4-10+1(with 5 dimples), 20x30x5~15+1(with 18 dimples), 20x20x5-10mm( with 13 dimples)
- Ceramic Block: 40x40x40mm, 45x45x50mm,32x32x22mm, 38x38x38mm,etc.
- Ceramic Cylinder/rod: 6x6mm,15x15mm,20x20mm, 31x31mm,40x40mm, 45x50mm, 50x50mm etc.

5. Ceramic wear lining tiles for a variety of applications:
Processing equipment:
l Pharmaceutical clean rooms
l Food processing plants
l Grain handling
l Mineral processing
l Cement manufacturing
l Chemical processing
l Large Cyclones:
l Coal-fired power plants
l Steel Mills
l Asphalt Plants
l Petrochemical plants
l Pulp and paper mills

1.Low thermal conductivity,
2.Good thermal insulation performance.
3.Good integrity with furnace lining


Tyical features:

High compressive strength in normal temperature, high ability for anti-abrasion during work, low shrinkage degree under high temperature so as to maintaining an integrity of the furnace lining; low apparent porosity, and fe2o3 content to reduce the carbon deposit in the blowhole and avoid the bricks broken in case of expansion; seldom melting point settings shape.

Fireclay bricks are divided into different kinds which are mainly as below:
(1) normal purpose fireclay bricks
(2) fireclay bricks for coke oven
(3) fireclay bricks for blast furnace
(4) fireclay bricks for hot-blast stove
(5) glass furnace bottom fireclay blocks
(6) lower porosity fireclay bricks.



In plastic sheets or in wooden pallets

Appears in white with snap fastener
Application: Used as wear-resistant inner lining of ball mills and pipes.
Features
(1)Contains 92% alumina, high purity, will not cause contamination to the grinded material.
(2)Highly wear resistant, with wear performance 266 times that of manganese steel, long service life.
(3)Produces fine paste.
(4)Corrosion resistant, high density, high mechanical strength.

Packing: in Cartons
Product Advantagesï¼?Just tell us the diameter and length of your ball mill. We will work out the size and quantity of the lining brick you need.
The alumina produced by Shandong Aluminum is used as the basic material, which provides high purity, little impurity and stable quality. we got ISO900 system certificate and the entire production process is controllable and traceable. Each batch of product is strictly tested. The process and result control guarantee stable performance and proven final product quality.

Characteristic:
Low density
High purity
Low thermal conductivity
Excellent thermal shock resistance

Application:
Glass industries iron & steel industries
Ceramics industries non-ferrous metals industries
Electrolytic aluminum industries power generation industries
Heat surface fireproof lining other fire-proof back lining.


Size 230x114x65/75mm
Density 0.6g/cm3
Classification temperature 1260c
Fe2o3 0.7%

Refractory brick
Refractory bricks refers to the brick whose al2o3 contains from 30% to 80%, the contains of al2o3 from 30% to 42% is call clay bricks, the contains of al2o3 from 45% to 80% is call high alumina bricks.
Clay brick
1.Good acid stability
2.Good thermal performance
3.Good thermal shrinkage
4.Good resistance to abrasion and corrosion

High alumina brick
1. High refractoriness, high-temperature endurable.
2. Good corrosion resistance.
3. Good spalling resistance and wear resistance.
4. Good thermal shock resistance.
5. High mechanical strength.
6. High-temperature creep rate is low.
7. Good volume stability at high temperature.

Typical application
Clay brick is suitable for secondary parts of coke oven, such as regenerator seal wall, small flue lining brick and regenerator checker brick lining brick, roof, door and rising pipe lining brick, etc.It is one of refractory brick used in blast furnaces, hot blast stove, heating furnace, power boiler, lime kiln, rotary kiln, ceramics.
High alumina brick is mainly used for masonry in blast furnaces, hot air stoves, electric furnace roof, blast furnace and reverberatory furnace, rotary kiln lining. In addition, high alumina brick also widely used for open hearth regenerative checker brick, pouring system with plug head, gate brick, etc

Alumina Welded Brick With Hole
Wear Resistant Solutions
Wear Temperature Alumina Welded,Alumina Welded Brick With Hole
Application: Wear-resistant material for surfaces of delivery equipment or liquid flowing pipes of petroleum, mining, cement,chemical,steel works and power plants, purposed to effectively resist the impact , corrosion and thermal impact from passing material, reduce abrasion and thereby significantly extends the service life of the equipment. It is the first choice for wear-resistant material for industrial application. It especially endure high temperature.
Tech date:

Application: Wear-resistant material for surfaces of delivery equipment or liquid flowing pipes of petroleum, mining, cement,chemical,steel works and power plants, purposed to effectively resist the impact , corrosion and thermal impact from passing material, reduce abrasion and thereby significantly extends the service life of the equipment. It is the first choice for wear-resistant material for industrial application. It especially endure high temperature.
 
Installation: Either by welding or by sticking with glue according to specific working condition
More information you can view here.