Find Verified Bar Spoon Suppliers, Manufacturers and Wholesalers

Kowey Open-style High Speed Robot for Plastic Spoon-fork
Length:2620mm Width:1200mm Heigth:1220mm X stroke:600mm Y stroke:1000mm Z storke:1600mm
Power: single-phase AC 220V/50HZ
Air consumption: X Y Z-servo motor
Type of arm: Telescopic
Max load (with tooling): 7 KG
Min take-out time:0.5S

Kowey robot arms are applicable to all types of injection machine of 50-3000T for take-out products and sprues. After installed robot, the productivity will be increased 10-30%, reduce defective rate, ensure safety of operators, reduce manpower and accurately control the output to reduce waste.

LED Lighting-1
Car decoration
Architectural decorative lighting
Archway, canopy and bridge edge lighting
Amusement park, theater and aircraft cabin mood lighting
Emergency hallway lighting
Auditorium walkway lighting
Stairway accent lighting
Concealed lighting
Backlighting for signage letters
Channel letter lighting
Emergency exit path lighting
Cove lighting.

Material:SS
4-1/2" Round wl dual layers "Y" slant tips.
ID:2-1/4" OD:2-1/2" BODY:12"X4-1/2"
OV Length:21-1/2"

Inside:bubble
Outside:carton

Dual 4-1/2"round muffler with turn-up tips.
ID:2-1/2" OD:3-1/2" BODY:10-3/8"L 4-1/2"W
OV Length:23-1/2" OV Width: 9-1/4"

Inside;bubble
Outside:carton

Inlet:65mm
Outlet:76mm
Length:180mm

Inside:small color carton
Outside:carton
25pieces/cartons

There are four-bar and five-bar, different size of friction hinges.
We offer open angle 60, 90 degree friction hinges.
Adopted double fixed slider, increases carry capacity
Adjustable friction with localized screw, allows casement windows to stay any location.



1000/pcs

Input: 10 ways, Output: 1 way
Plastic enclosure (ABS or PC) IP66: 1 set, 280x190x130mm
Mounting metal hook: 4pcs
Bus bar (pure copper with nickel plated): 2pcs
Ring terminals for 2.5 or 4.0 mm2 cable: +VE: 10pcs, -VE: 10pcs
Ring terminals for 16 mm2 cable: +VE: 1 pc, -VE: 1 pc
Universal Installation motherboard: 1 pc
Cable gland for 2 x 2.5 or 2 x 4.0 mm2 cable: 10pcs
Cable gland for 2 x 25 mm2 cable: 1 pc
Optional: MC4 plugs or other plugs

High reliability: The SCR is installed in low voltage circuit, not in main circuit, so, the withstanding voltage is just 1% of main circuit voltage.
Low harmonic contents: THD is below of 5%, which comply with related national criterion, if the multiple connections are adopted, the THD can be reduced below of 1.2%.
Small dimension: the dimension of MCR is about 2/5 of TCR.
It can be able to connect in high voltage power grid, the cost and floor space are reduced dramatically.
Fast response time(100~300ms), it can fully meet the demand of dynamic reactive power compensation of power equipments.
No need of cooling devices, which reduce the fault rate, maintenance cost and floor space.

The advantage of MCR-typed SVC

The MCR-typed SVC was based on traditional saturation reactor technology; it was put forward by Russia scientists. They introduced the concept of magnetic valve creatively to just make the small section of iron core saturation, which solved the high harmonic problems caused by traditional saturation reactor, because all iron cores in traditional saturation reactor are excessive saturation, then result in nonlinear harmonic. At the same time, the SVC of MCR type reduced the dimension, weight and noise of entire system; it has many advantages, such as: low harmonics, fast response time, high voltage withstanding level, stable operation, small floor space and long service life. Therefore, the SVC of MCR type is quickly spreading in Russia, Ukraine, America, India, China and other countries. It plays a very important role in improving power quality, decreasing reactive power loss, stabilizing power grid voltage and enhancing the reliability of power grid operation.Because MCR-typed SVC adopted advanced micro-electronics technology, it can regulate reactive power demand and compensation on bus bar accurately:

The inductive reactive current in main circuit can be adjusted through changing low voltage DC to regulate main circuit impedance fast and smoothly, meanwhile, through cooperating with capacitor bank paralleled in bus bar, reactive power compensation demand can be realized on bus bar, and dynamic response and improved power factor can stabilize bus bar voltage.
Choosing reactor parameters properly connected in series with capacitor bank, the compensation on fundamental wave can be obtained, and the harmonic also can be filtered.
Because the SVC of MCR is free of frequent switching from mechanical parts, then it avoids surge and over-voltage impact caused by MSC, which enhances the reliability and the service life of the equipment, as well, protects the other instruments.

The SVC of MCR type fully absorbed advantages and functions of TCR-typed SVC by comparison; it solved the problems of smooth regulation which can not be realized by MSC and TSC, and also overcome some disadvantages of TCR-typed SVC. Because the reactor is connected to high voltage main circuit directly in series, it must stand extra high voltage and ultra high voltage. At present, the highest voltage of reactor in our country reach to 1000KV, and the maximum capacity reach to 320MVar. The reactor also has over-load function; it will not generate big damage to system except heating, while, the thyristors in TCR-typed SVC is connected to high voltage circuit directly, the over-voltage will result in faults and break. So it is very stable for MCR-typed SVC to operate under the high voltage circuit with free of maintenance.

Wooden case (Fumigation).

Why choose SVC of MCR Type

High reliability: The SCR is installed in low voltage circuit, not in main circuit, so, the withstanding voltage is just 1% of main circuit voltage.
Low harmonic contents: THD is below of 5%, which comply with related national criterion, if the multiple connections are adopted, the THD can be reduced below of 1.2%.
Small dimension: the dimension of MCR is about 2/5 of TCR.
It can be able to connect in high voltage power grid, the cost and floor space are reduced dramatically.
Fast response time(100~300ms), it can fully meet the demand of dynamic reactive power compensation of power equipments.
No need of cooling devices, which reduce the fault rate, maintenance cost and floor space.
The advantage of MCR-typed SVC

The MCR-typed SVC was based on traditional saturation reactor technology; it was put forward by Russia scientists. They introduced the concept of magnetic valve creatively to just make the small section of iron core saturation, which solved the high harmonic problems caused by traditional saturation reactor, because all iron cores in traditional saturation reactor are excessive saturation, then result in nonlinear harmonic. At the same time, the SVC of MCR type reduced the dimension, weight and noise of entire system; it has many advantages, such as: low harmonics, fast response time, high voltage withstanding level, stable operation, small floor space and long service life. Therefore, the SVC of MCR type is quickly spreading in Russia, Ukraine, America, India, China and other countries. It plays a very important role in improving power quality, decreasing reactive power loss, stabilizing power grid voltage and enhancing the reliability of power grid operation.Because MCR-typed SVC adopted advanced micro-electronics technology, it can regulate reactive power demand and compensation on bus bar accurately:

The inductive reactive current in main circuit can be adjusted through changing low voltage DC to regulate main circuit impedance fast and smoothly, meanwhile, through cooperating with capacitor bank paralleled in bus bar, reactive power compensation demand can be realized on bus bar, and dynamic response and improved power factor can stabilize bus bar voltage.
Choosing reactor parameters properly connected in series with capacitor bank, the compensation on fundamental wave can be obtained, and the harmonic also can be filtered.
Because the SVC of MCR is free of frequent switching from mechanical parts, then it avoids surge and over-voltage impact caused by MSC, which enhances the reliability and the service life of the equipment, as well, protects the other instruments.

The SVC of MCR type fully absorbed advantages and functions of TCR-typed SVC by comparison; it solved the problems of smooth regulation which can not be realized by MSC and TSC, and also overcome some disadvantages of TCR-typed SVC. Because the reactor is connected to high voltage main circuit directly in series, it must stand extra high voltage and ultra high voltage. At present, the highest voltage of reactor in our country reach to 1000KV, and the maximum capacity reach to 320MVar. The reactor also has over-load function; it will not generate big damage to system except heating, while, the thyristors in TCR-typed SVC is connected to high voltage circuit directly, the over-voltage will result in faults and break. So it is very stable for MCR-typed SVC to operate under the high voltage circuit with free of maintenance.

Application industrial fields

A complete set of SVC system can be used to generate constantly varied inductive and capacitive reactive power with fast response time. So far, SVC system has been extensively used in electric power system and industrial field such as:

Rolling mill, Electric arc furnace and ladle furnace, Electric railway traction substation, Hoists and other heavy industrial loads, Long distance power transmission, Wind power plant and Secondary substation (66KV to 110KV) Etc.


Wooden case (Fumigation).

Product Model XP-80160I
Printing method line thermal
Resolution 576dots/line OR 512dots/line
Character size ANK,FontA:12*24dots,FontB:9*17dots Simplified Chinese,traditional Chinese:24*24dots
Bar code JUPC-A/UPC-E/JAN13(EAN13)/JAN8(EAN8)/CODABAR/ITF/CODE39/CODE93/CODE128
Interface Serial/parallel/USB
Power supply DC24V/2.5A
Auto cutter without cutter
Printing head life 100km
Drivers Win 9X/Win ME/Win 2000/Win 2003/Win NT/Win XP/Win Vista/win 7
NV Flash buffer size 60k bytes
Input buffer 32k bytes
Cash drawer control DC 12-24V/1A
Working environment temperature (0~45¡ãc) humidity(10~80%)
Storage environment temperature (-10~60¡ãc) humidity(10~90%)
Printing speed 160mm/sec
Paper width 79.5¡À0.5mm
Paper external diameter ¦Õ83mm
Paper thickness 0.06-0.08mm.


Weight 1.48kg
Dimension 190x145x153mm
inner:each in a plastic bag outer:each in an independent carton 6 sets in one carton.

Product Model XP-58III
Printing method line thermal
Resolution 384dots/line
Character size ANK,FontA:12*24dots,FontB:9*17dots Simplified Chinese,traditional Chinese:24*24dots
Bar code JAN13(EAN13)/JAN8(EAN8)/CODE39
Interface Serial/parallel/USB/ Ethernet
Power supply DC12V/3A
Cash drawer control DC 12V/1A
Auto cutter without
Printing head life 100KM
Drivers Win 9X/Win ME/Win 2000/Win 2003/Win NT/Win XP/Win Vista/win 7
Working environment temperature (0~45¡ãC) humidity(10~80%)
Storage environment temperature (-10~60¡ãC) humidity(10~90%)
Printing speed 70mm/sec
Paper width 57.5¡À0.5mm
Paper external diameter ¦Õ65mm
Paper thickness 0.06-0.08mm.


Weight 0.94kg
Dimension 215x145x125mm
Inner:each in a plastic bag outer:each in an independent carton 6 sets in one carton.