Find Verified Cricket Balls Suppliers, Manufacturers and Wholesalers

Profile
Nylon balls are insoluble in diluted mineral acids and most organic acids, and common solvents. Nylon balls are exceptionally resistant to alkalis, petroleum oil and greases at temperatures up to 300¡ãF. Acids such as lactic acid, photographic solutions, etc., have little or no effect.
Nylon balls are an excellent choice for applications that require a lightweight, resilient and abrasion-resistant material that performs well in hot, chemically aggressive and humid environments. Used without lubrication, nylon balls provide greater toughness and ductility than most plastics.
Nylon balls are also an environmentally favorable choice, because of the way they are made, and can be reused.
Specific Gravity
1.12 -1.14
Hardness
R119
Polypropylene Balls (PP)
Profile
Polypropylene balls have excellent chemical resistance and low density, as well as the highest melting point of the volume thermoplastics. Polypropylene balls also have high tensile strength. They are an excellent electrical insulator, with low dielectric constant and loss factors. Polypropylene balls are highly resistant to acids, alkalis, alcohols and many inorganic chemicals, and are non-toxic.
Specific Gravity
.90
Rockwell Hardness
R80-102



R119-122

Brass ball
Material: brass
Size: 1.0mm-12.7mm
Grade: g100-g1000
Hardness: hrb 75-87
Certificate:iso9001, ts16949, iso14001
Feature: excellent corrosion resistance, excellent electrical conductivity, low friction
Application: valves, electronics, automotive security, appliance, petrochemical industry operations

Ceramic balls
Size: 0.5mm-20mm
Grade: g3/g5/g10
Certificate:iso9001, ts16949, iso14001
Feature: spherical, rolling elements that provide higher stiffness, lower thermal expansion, lighter weight, increased corrosion resistance, and higher electrical resistance than steel balls

Applications for ceramic balls
The globalspec specsearch database contains information about applications for ceramic balls, many of which are used as bearings. The following list provides some examples.
¡è ceramic aerospace bearings are used in airframes as well as gyroscopes (gyros), navigation systems, flow meters, avionic instruments, and other aerospace parts.
Agitator balls have suitable corrosion and density (weight) for agitation or mixing applications,  such as the balls used

Glass balls
Size: 0.5mm-20mm
Grade: g3/g5/g10
Certificate: iso9001, ts16949, iso14001
Feature: high corrosion resistance, light weight (1/3 of stainless steel), low coefficient of friction, high dimensional stability, tight tolerances, non-magnetic, zero porosity, stable material cost

Material:chrome steel
Size:0.5mm-250mm
Grade:g5-g200

Processing material for bearing steel ball, stainless steel ball, chrome steel ball, glass steel ball, plastic steel ball, copper ball.

1) Diameters: 40 - 50mm
2) Materials: rubber or plastic ball
3) Loading capacity: 30kg
4) Competitive price
5) The color can be silver , golden and black.






Export standard carton 38x19x23 120pcs/ctn 15.5kgs/ctn

Stell ball

Miniature stainless steel ball 2.0mm (SUS440C) is a kind of steel ball wildly used in bearings. Size range 2.0mm--25.4mm, Grade G10--G500, Certificate ISO9001-2008, TS-16949, ISO14001. It contain anti-rust function with higher precision which could be applied into precision bearings.


1. Material: AISI 440/440C; SUS440/440C. AISI52100
2. Size: 2.0mm-.50.8mm.
3. Grade: G10, G25, G100, G500.
4. Hardness: HRC58-65.
5. Grade Standard Comply with AFMBA. 10 or DIN 5401.
6. Certificate: ISO-9001, ISO-14001, TS-16949.
7. Application: It's suitable for special environment and machine as like hydraulic parts, grinding machine and so on, it has better rust resistence and hardness than AISI420.
Sizes are available in millimeters, inches and fractions.

AISI 440C balls are a martenistic-type stainless steel, which is used extensively in bearing applications that require corrosion-resisting properties. 440C balls are resistant to corrosion from fresh water, steam, crude oil, gasoline, perspiration, alcohol, blood and foodstuffs. Maximum resistance to corrosion and tarnishing is only achieved when 440C is fully hardened and surfaces are polished to a high luster. HRT provides 440C balls in vacuum melt condition upon request.

Material: Copper,Brass
1.Size 1.0mm-25.4mm
2.Characteristics: With a low coefficient of friction, axial and radial movement.
3.Applications: Mainly used for valve, spray, instrument, pressure gauge. The meter, carburetor, electrical accessories, etc.

Material SODA-LIME,BOROSILICATE
1.Size:0.5mm-25.4mm
2.General Applications:
Brass resist corrosion From petroleum Products echo heavy Brass boll are use in valves petroleum products loch hole electronic industry.Mainly using in micro spray pump, decoration and so on.

1.Material: PE/POM/PP/PA/NYLON
2.SIDE:1mm to 50mm
3.Application areas: For crafts, accessories, household tools.
4.Quality standards: No mold lines, without edges, smooth surface.

MaterialCeramic(ZRO2,SI3N4)
1.Size: 0.8mm-10mm
2.Grades: G5-G20
3.Applications: Widely used in different types of ceramic,enamel,glass,chemical industry and thick hard material finishing and deep processing of the factory.It is grinding medium of the fine crushing equipment such as ball mill,vibration mill,Cylindrical grinding machine.The crushing grinding efficiency and wear resistance significantly better than ordinary or natural pebble stone ball.

Material introduction by q.R. Miniature steel ball :
Chemical component of aisi440c (sus440c)
Aisi(sus)440c
C 0.95-1.20
Si 1.00max
Mn 1.00max
P 0.04max
S 0.02max
Cr 16.00-18.00
Mo 0.40-0.80

Application area of sus440c (aisi440c) steel balls by q.R. Miniature steel ball:

Aisi 440c balls are a martenistic-type stainless steel, which is used extensively in bearing applications that require corrosion-resisting properties.440c balls are resistant to corrosion from fresh water, steam, crude oil, gasoline, perspiration, alcohol, blood and foodstuffs. Maximum resistance to corrosion and tarnishing is only achieved when 440c is fully hardened and surfaces are polished to a high luster.Hrt provides 440c balls in vacuum melt condition upon request.

Feature of sus440c (aisi440c/ 440) steel ball by q.R. Miniature steel ball:

1.Made of material in aisi(sus) 440/440c.
2.Size: 2.0mm-25.4mm.
3.Grade: g10, g25, g100, g500.
4.Hardness: hrc58-65.
5.Grade standard comply with afmba.10 or din 5401.
6.Certificate: iso-9001, iso-14001, ts-16949.
7.Application: it's suitable for special environment and machine as like hydraulic parts, grinding machine and so on, it has better rust resistence and hardness than aisi420.
Sizes are available in millimeters, inches and fractions.

Chrome steel balls
Material: chrome steel/aisi52100/suj-2/100cr6
Size: 0.5mm~3mm
Grade: g5~g1000
Hardness: hrc60-66
Certifications: iso9001, ts16949, iso14001
Feature: excellent surface quality, superior wear resistance, high hardness and high load bearing capacity
Application: bearing, ball screw, linear motion guide, automotive parts, chemical, food processing, ink and paint grinding, caster wheel, slide rail bicycle and car

0.8mm,1.0mm, 1.2mm, 1.3mm, 1.5mm, 1.588mm chrome steel ball, steel ball
Material: Gcr15, AISI440C, SUS420
Size:0.8mm,1.0mm, 1.2mm, 1.3mm, 1.5mm, 1.588mm
Grade: G10

Chrome steel balls
Material: chrome steel/aisi52100/suj-2/100cr6
Size: 0.5mm~3mm
Grade: g5~g1000
Hardness: hrc60-66
Certifications: iso9001, ts16949, iso14001
Feature: excellent surface quality, superior wear resistance, high hardness and high load bearing capacity
Application: bearing, ball screw, linear motion guide, automotive parts, chemical, food processing, ink and paint grinding, caster wheel, slide rail bicycle and car

Small/miniature steel ball

1) size: 0.5mm-4mm (according to clients' requirement)

2) materials: aisi302/316, aisi420/440c, aisi52100

3) grade: g10-g1000

4) certificate: iso-9001, ts-16949

5) application field: small balls includes computers, mobile phone lithium battery, rem and mass products like the writing instruments.

The small balls can be further geometrical designed by additional processes. The focus to the micro and nano subject has become much more important in various international development. A positive example is the new process technology for the production of small steel balls.





Carton, wooden box.

Material: chrome steel, stainless steel (such as 316, 316l, 440c and so on).
Size: 0.5mm-250mm
Grade: G5-G200.

1. Injected pmma ball is made from acrylic material (pmma 100%)



2. Injected pmma ball moq should be 200kgs, is acceptable.



3. For the acrylic balls shape , we can make any style according to your request, including color and

Other art technica



4. It apply to lamp accessoies and house decorations.



5. Delivery timely



6. Approved by sgs !


1 pcs /pe bag, 50 pcs /carton