The structure of disc suspension insulators enables them form the insulator string by fitting into themselves one another as per voltage requirement.
Connected fitting type: ball & socket type; clevis & tongue type
Strength can be 40 kn, 45kn, 60kn, 70kn, 80kn, 100kn, 110kn, 120 kn, 125kn, 160kn, 210kn, 300kn
Main type:
Standard suspension insulator:
Ansi type: 52-1, 52-2, 52-3, 52-4, 52-5, 52-6, 52-8, 52-9 according to ansi c29.2
Iec type: u70bl, u70bs, u100b, u120b, u160b, u210b, u300b according to iec383, bs137
Fog type anti-pollution suspension insulators
Double shed anti-pollution insulators
Pin insulator is mounted rigidly on a supporting structure by an insulator pin/spindle. Unless otherwise stated, this term does not include the insulator pin.
Pin insulator can be zinc thimble with thread type and porcelain thread type.
Voltage: 11/12kv pin insulator, 15kv pin insulator, 22kv pin insulator, 33/36kv pin insulator
Main type:
Ansi c29.5 and c29.6 type: 55-1, 55-2, 55-3, 55-4, 55-5, 55-6, 56-1, 56-2, 56-3, 56-4
Bs or iec type: p-11-y, p-15-y, p-22-y, p-33-y
Line post insulator used on distribution line and transmission line upto 132kv. It is mounted rigidly on supporting structure by means of a steed or bolts. It is non-puncturable design.
Connected fitting type: tie top conductor binding type and clamp top with vertical or horizontal mounting.
Cantilever strength can be 5kn, 10kn, 12.5kn, 16kn.
Main type:
Ansi c29.7 type: 57-1, 57-2, 57-3, 57-4, 57-5, 57-11, 57-12, 57-13, 57-14, 57-15, 57-21, 57-22, 57-23, 57-24, 57-25, 57-31, 57-32, 57-33, 57-34, 57-35
Other type according to iec383 and bs137.
The porcelain bushings are used extensively in electrical apparatus. Porcelain bushing is the device that enables one or several conductors to pass through a partition such as a wall or tank and insulates the conductors from it. The means of attachment to the partition, such as flange or other fixing device, forms part of the bushing.
Big porcelain bushing, hollow insulator upto 1000kv:
Upside down transformer bushing
Capacity voltage transformer bushing
Sf6 current transformer bushing
Outdoor cable end bushing
Voltage transformer bushing
Current transformer bushing
Circuit breaker post bushing
Sf6 transformer bushing
Oil immersed voltage transformer bushing
Sf6 circuit breaker bushing
Electrostatic precipitator bushing
Small porcelain bushing, hollow insulators are used as the insulating elements such as the transformer bushings and wall bushings .They are designed to perform under outdoor and indoor conditions for voltage upto 36kv.
ACSR have been widely used in power transmission lines with various voltage levels,because they have such good characteristics as simple structure,convenient installation and maintenance,low cost large transmission capacity.And they are also suitable for laying across rivers valleys and the places where special geographical features exist.
The series of reactor kettles is my company according to the actual requirements of customers and the standard production of new double glass reactor with cylindrical glass reactor body, which absorb the international and domestic advantages of similar products, while bold and innovative, not only easy to use (one can easily move, , And the structure of innovative and practical, beautiful appearance generous, leading domestic; for modern chemistry, fine chemicals, bio-pharmaceuticals, new materials, such as the synthesis of experimental and production of the ideal equipment. Specific specifications from 1L to 200L optional.
The working principle of the series reactor: double-layer glass reactor inside the reaction material, but also can be vacuum to do the stirring reaction; sandwich can be connected to heat (water, water or hot oil or electric sets) to do heating or cooling; The reaction solution was controlled to evaporate and reflux.
Main Features of the Jacket Glass Reactor
1, The use of borosilicate glass (GG17 material), has excellent physical and chemical properties.
2, Speed mixing, smooth and reliable operation, torque, no spark.
3, PTFE components mechanical seal, proprietary technology, can maintain the market similar products, high vacuum (-0.095mpa or so), the leading domestic.
4, PTEE discharge valve, kettle body and lid are also customized according to customer requirements.
5, The reaction of the sandwich heating (cooling) solution can be completely removed after the reaction, no solution.
6, Regardless of refrigeration or heating, can be produced according to customer requirements matching products.
7, The overall structure of science, novel, practical, beautiful, leading domestic.
Jacket Glass reactor principle is two parts, in the inner glass,the mix bar is continous stirring to make mixing or evaporating reaction under negative vacuum pressue. The stirring is under speed controlling. The jacketed glass could supply heating or cooling material to help the chemical reaction. Recently glass reactors has been widely used in chemical, biological and pharmaceutical experiment and prodcuction.
Brief Introduction of the Jacket Glass Reactor
The series of reactor kettles is my company according to the actual requirements of customers and the standard production of new double glass reactor with cylindrical glass reactor body, which absorb the international and domestic advantages of similar products, while bold and innovative, not only easy to use (one can easily move, , And the structure of innovative and practical, beautiful appearance generous, leading domestic; for modern chemistry, fine chemicals, bio-pharmaceuticals, new materials, such as the synthesis of experimental and production of the ideal equipment. Specific specifications from 1L to 200L optional.
The working principle of the series reactor: double-layer glass reactor inside the reaction material, but also can be vacuum to do the stirring reaction; sandwich can be connected to heat (water, water or hot oil or electric sets) to do heating or cooling; The reaction solution was controlled to evaporate and reflux.
1. Single glass reactor using borosilicate glass, has excellent physical and chemical properties, bottles and transparent, visible reaction liquid material
2. Stirring tetrafluoroethylene, used in a variety of solvents stirring
3. Motor running smooth, torque, no spark
4. PTFE sealing components, high vacuum
5. Heated oil / water bath with precise control
6. Deconstruction is compact, easy to operate
Function feature of the Single Glass Reactor
1. Distillation, reflux can be achieved simultaneously
2. Special long-term agitation seal
3. GG17 glass and PTFE materials and contacts, no cross-contamination.
4. Digital speed and high and low temperature display, easy operation
1. Reaction kettle can be lift up and down. It is convenient to feed materials and take the blocky crystals out of the kettle.
2. Reaction kettle can be rotated for 120 degree, it is convenient to use and clean.
Technical Data
Glass reaction vessel: 10L;
Jacket capacity: 3L;
High borosilicate glass 3.3;
Kettle body tolerable temperature: -80 to +200 degree;
Kettle body resistance to temperature difference: 90 degree;
Motor power: 90W;
Stirring speed: 50 to 500rpm;
Operating pressure(MPa): Vacuum or normal pressure.
1. Reaction kettle can be lift up and down. It is convenient to feed materials and take the blocky crystals out of the kettle.
2. Reaction kettle can be rotated for 120 degree, it is convenient to use and clean.
Technical Data
Glass reaction vessel: 20L;
Jacket capacity: 6L;
High borosilicate glass 3.3;
Kettle body tolerable temperature: -80 to +200 degree;
Kettle body resistance to temperature difference: 90 degree;
Motor power: 90W;
Stirring speed: 50 to 500rpm;
Operating pressure(MPa): Vacuum or normal pressure.
1. Reaction kettle can be lift up and down. It is convenient to feed materials and take the blocky crystals out of the kettle.
2. Reaction kettle can be rotated for 120 degree, it is convenient to use and clean.
Technical Data
Glass reaction vessel: 30L;
Jacket capacity: 10L;
High borosilicate glass 3.3;
Kettle body tolerable temperature: -80 to +200 degree;
Kettle body resistance to temperature difference: 90 degree;
Motor power: 90W;
Stirring speed: 50 to 500rpm;
Operating pressure(MPa): Vacuum or normal pressure.
1. Reaction kettle can be lift up and down. It is convenient to feed materials and take the blocky crystals out of the kettle.
2. Reaction kettle can be rotated for 120 degree, it is convenient to use and clean.
Technical Data
Glass reaction vessel: 50L;
Jacket capacity: 16L;
High borosilicate glass 3.3;
Kettle body tolerable temperature: -80 to +200 degree;
Kettle body resistance to temperature difference: 90 degree;
Motor power: 120W;
Stirring speed: 50 to 500rpm;
Operating pressure(MPa): Vacuum or normal pressure.
Product Categories: Monitor accessories
Place of Origin: Henan, China (Mainland)
Brand Name: Edan
Connectors: 7 pin
Model Number: J401-D(72CL-F)
Type: Infant/Pediatric Silicone Soft Tip
Cable Material: Medical TPU
Cable Color: Gray
Cable Length: 3Meter
Usage: Pressure Sensor, Direct spo2 sensor connected to the monitor, no need for extension cable.
Compatible Mode: H100B(Non-Oximax)
Certificate: CE, ISO13485
Warranty: 12 months
Usage: Pressure Sensor, Direct spo2 sensor connected to the monitor, no need for extension cable.
Compatible Mode: AS/3, CS/3, CH/S, CH/2S, CH-RS, CG/2S, Cardicap I, Cardicap II, Cardicap 5, Capnomac Ultima, Light Monitor: M-Estpr, Oscar II, OSP-200, Satlite Trans, SatliteTrans Plus, System 5ULTS00, ULTSIO, ULTSVI, ULTSVO
Usage: Pressure Sensor, Direct spo2 sensor connected to the monitor, no need for extension cable.
Compatible Mode: Nellcor N100, N180, N200, N-20, NPB-50, NPB-75, NPB-290, NPB-295, N-390, N-395, N-3000, N-6000
Details:
1.Connectors: 8 pin
2.Direct spo2 sensor connected to the monitor, no need for extension cable.
3. Compatible models: 25C, C1, C3, M3, M5, MP20, MP30, MP50, MP70, MP80, VM5, VM6, VM8 (Philips tech)
Delivery Time: 3-5 days
Shipping: DHL/FedEx/EMS/UPS/TNT
Packing: 1pcs pack into one PU bag, then pack inside a small carton box
Types of Patient Finger For Your Choice:
1. Adult finger clip
2. Adult silicone soft tip
3. Pediatric finger clip
4. Pediatric silicone soft tip
5. Infant silicone soft tip
6. Neonate silicone wrap
6. Neonate "Y" type
7. Adult ear clip
Our Advantages:
1. Factory price is more competitive.
2. Fast delivery(3-5 days, we are a manufacturer, have enough products in stock.)
3. All products are made of medical material with very good quality(OE, ISO, ect. certificates)
4. Samples available(accept trail order)
5. One piece MOQ is acceptable.
6. OEM & ODM service
7. Adult/infant/pediatric/neonatal patient finger types are available
FAQ
1. Are you a trading company or a manufacturer with your own factory?
We are a professional manufacturer with our own R&D team.
2. Can I have my own Logo on the product?
Yes, your own drawing is welcomed. We can design and make your logo on the product, but the cost need to be paid by your side.
3. Can we visit your factory?
Of course. Welcome to visit our factory. Our professional technicians are willing to show you more details of our products.
4.Does your company have any certificates?
Yes, we are certified with CE and ISO13485. Its our duty to offer you high quality products with best service and the most competitive price.
5. When can you deliver products?
It depends on the quantity. Most of our products are in stock. For common orders, we can arrange shipment immediately after we get your payment.
Main Products We Supply:
Reusable Spo2 Sensor
Disposable Spo2 Sensor
Spo2 Extension Cable
ECG Cable with leadwires
EKG Cable with leadwires, EKG /ECG Trunk Cable
Temperature Probe
Fetal Transducer
ECG Electrode
EEG Cable
IBP Cable and Transducer
NIBP Cuff and hose
1436 Electric Components Suppliers
Short on time? Let Electric Components sellers contact you.
