Model NO.:500ZB3-58
Conductor Circuit:Single Circuit
Materials:Steel
Style:Independence Tower
Nominal Height:58m
Ground Wire Type:Opgw-150
Package:Standard Package or According to Your Request
Usage:Tension Tower, Linear Tower
Certification:ISO, GS
Standard:Standard
Structure:Customized
Wire Type:4*Lgj-400/35
Specification:SGS or according to your drawings
HS Code:73082000
Product overview:
The series submersible sewage pump is mainly used for industry,agricultural,fishery,mine drainage,building construction, municipal environmental protection and tunnel construction etc. Trades to drain off soild particles with short fiber, confetti,sediment and so on. Or drain off software solids liquids. Such as mud,grey water, life wastewater, sewage and so on. The series submersible pump is the ideal equipment for agricultural irrigation,raising livestock and poultry manure pit,cleaning the silt of pool and construction site.
Usage:
Used for discharging waste water and other material with granular material, also it can be used for clean water and corrosive medium.
Conditions of using:
1.The medium temperature should not be over 40oC ,PH:4-10.
2.The solid volume ratio of the medium should not be over 2%.
3.The kinematic viscosity of medium between 7*10-7m2/s---23*10-6 m2/s.
4.The density of the medium is 1.2*10 3kg/m3.
5.Centered on the impeller,underwater not more than 5m.
Scope of application:
1. For discharging polluted waste water of factories and industries;
2. sewage discharge station of living quarters;
3. drainage system of municipal sewage treatment plant
4. drainage station of fire fighting system
5. waterworks equipment of running water factory
6. sewage discharge of hospitals and hotels
7. construction site of municipal engineering
8. matched equipment of exploration mine
9. country biogas digester
10.farm irrigation
11. other industries
Product overview:
The series submersible sewage pump is mainly used for industry,agricultural,fishery,mine drainage,building construction, municipal environmental protection and tunnel construction etc. Trades to drain off soild particles with short fiber, confetti,sediment and so on. Or drain off software solids liquids. Such as mud,grey water, life wastewater, sewage and so on. The series submersible pump is the ideal equipment for agricultural irrigation,raising livestock and poultry manure pit,cleaning the silt of pool and construction site.
Usage:
Used for discharging waste water and other material with granular material, also it can be used for clean water and corrosive medium.
Conditions of using:
1.The medium temperature should not be over 40oC ,PH:4-10.
2.The solid volume ratio of the medium should not be over 2%.
3.The kinematic viscosity of medium between 7*10-7m2/s---23*10-6 m2/s.
4.The density of the medium is 1.2*10 3kg/m3.
5.Centered on the impeller,underwater not more than 5m.
Scope of application:
1. For discharging polluted waste water of factories and industries;
2. sewage discharge station of living quarters;
3. drainage system of municipal sewage treatment plant
4. drainage station of fire fighting system
5. waterworks equipment of running water factory
6. sewage discharge of hospitals and hotels
7. construction site of municipal engineering
8. matched equipment of exploration mine
9. country biogas digester
10.farm irrigation
11. other industries
Product overview:
The series submersible sewage pump is mainly used for industry,agricultural,fishery,mine drainage,building construction, municipal environmental protection and tunnel construction etc. Trades to drain off soild particles with short fiber, confetti,sediment and so on. Or drain off software solids liquids. Such as mud,grey water, life wastewater, sewage and so on. The series submersible pump is the ideal equipment for agricultural irrigation,raising livestock and poultry manure pit,cleaning the silt of pool and construction site.
Usage:
Used for discharging waste water and other material with granular material, also it can be used for clean water and corrosive medium.
Conditions of using:
1.The medium temperature should not be over 40oC ,PH:4-10.
2.The solid volume ratio of the medium should not be over 2%.
3.The kinematic viscosity of medium between 7*10-7m2/s---23*10-6 m2/s.
4.The density of the medium is 1.2*10 3kg/m3.
5.Centered on the impeller,underwater not more than 5m.
Scope of application:
1. For discharging polluted waste water of factories and industries;
2. sewage discharge station of living quarters;
3. drainage system of municipal sewage treatment plant
4. drainage station of fire fighting system
5. waterworks equipment of running water factory
6. sewage discharge of hospitals and hotels
7. construction site of municipal engineering
8. matched equipment of exploration mine
9. country biogas digester
10.farm irrigation
11. other industries
GRT industrial machine for fruits hot air circulation dryer for lemon
Specification :
1. Polished stainless-steel chamber
2. Latest PLD controller
3. Uniform distribution of air temperature
4. Forced-air convection
5. Heating methods:Electric or Steam heating
6. High efficiency
The fearures of hot air circulation drying machine:
1. Options of heat source: steam, electricity, or far infrared, or both steam electricity.
2. Drying temperature: steam heating 50-130 °C, Max.140 °C.
3. Electricity and far infrared:50-300 °C .Automatic control system and computer control system on request.
4. Commonly used steam pressure 0.2-0.8Mpa (2-8 bar).
5. For GRT-C-I, electric heated, rated power consumption: 15Kw, real consumption: 5-8Kw.
6. The special requirements should be indicated at the time of order.
7. Please consult as for any special requirements.
8. For operation temperature of over 140 °C or less than 60 °C, please indicate when order.
9. The ovens and baking trays made by our factory are uniform in dimensions, and can be exchanged each other.
10. Baking plate dimensions: 460*640*45mm
The application of hot air circulation drying machine :
Hot air circulating electric oven is suitable for heating and dehumidifying raw materials and products for pharmaceutical, chemical, foodstuff, light industry and heavy industry.
For example,active pharmaceutical ingredients,Chinese medicine yinpian, powder, granule, crude drug, drug packing bottle, pigment, dyestuff, dehydration vegetable, food, plastic resin, electric elements, salt, paper,leather, wool, catalyst materials dry.
Our services :
1.Accept OEM service
2.Engineers available to service machinery overseas
3.Our products including:Hot air batch dryer, mesh belt dryer,tunnel microwave drying machine, microwave vacuum dryer,etc.
4. we are able to cater to all the required expectations of our valued clients .
Why Choose Us?
1.We are professional drying equipment manufacture in china,has excellent experience.
2.We have advanced machine equipment, cost savings.
3.We supply 24 hours online service to solve your every question.
4.We have the best knowledge about the drying machine in USA,UK,CANADA,SOUTH AFRICA,INDIA,AUSTRALIA,ETC.
industrial stainless steel mango chips drying machine with low price
Specification :
1. Polished stainless-steel chamber
2. Latest PLD controller
3. Uniform distribution of air temperature
4. Forced-air convection
5. Heating methods:Electric or Steam heating
6. High efficiency
The fearures of industrial stainless steel ginger chips drying machine :
1. Options of heat source: steam, electricity, or far infrared, or both steam electricity.
2. Drying temperature: steam heating 50-130 °C, Max.140 °C.
3. Electricity and far infrared:50-300 °C .Automatic control system and computer control system on request.
4. Commonly used steam pressure 0.2-0.8Mpa (2-8 bar).
5. For GRT-C-I, electric heated, rated power consumption: 15Kw, real consumption: 5-8Kw.
6. The special requirements should be indicated at the time of order.
7. Please consult as for any special requirements.
8. For operation temperature of over 140 °C or less than 60 °C, please indicate when order.
9. The ovens and baking trays made by our factory are uniform in dimensions, and can be exchanged each other.
10. Baking plate dimensions: 460*640*45mm
The application of factory price industrial stainless ginger chips drying machine :
Hot air circulating electric oven is suitable for heating and dehumidifying raw materials and products for pharmaceutical, chemical, foodstuff, light industry and heavy industry.
For example,active pharmaceutical ingredients,Chinese medicine yinpian, powder, granule, crude drug, drug packing bottle, pigment, dyestuff, dehydration vegetable, food, plastic resin, electric elements, salt, paper,leather, wool, catalyst materials dry.
Our services :
1.Accept OEM service
2.Engineers available to service machinery overseas
3.Our products including:Hot air batch dryer, mesh belt dryer,tunnel microwave drying machine, microwave vacuum dryer,etc.
4. we are able to cater to all the required expectations of our valued clients .
Why Choose Us?
1.We are professional drying equipment manufacture in china,has excellent experience.
2.We have advanced machine equipment, cost savings.
3.We supply 24 hours online service to solve your every question.
4.We have the best knowledge about the drying machine in USA,UK,CANADA,SOUTH AFRICA,INDIA,AUSTRALIA,ETC.
GRT best quality contiuous drying machine microwave drying oven/dryer
Features of microwave drying machine/dryer :
1) Machine material: food-grade SUS304 stainless steel
2) Energy-saving more than 30%
3) High production efficiency
4) Safety and easy clear.
5) Improve working conditions: PLC touch screen control, automatically operation
6) The device control host environment temperature: seasonal normal temperature, environment relative humidity is less than 85RH.
7) Equipment body (microwave generating source part): Non corrosive gases, flammable, explosive gas around, environment temperature is 0-38 ?environmental relative humidity is lower than 85RH
8) Site requirements(L*W*H): 10m*3m* 3m
9) It is suitable for the deep drying of many material with drying and sterilization, such as, bean, corn, rice, ground peanut, etc.
10) The equipment which need user provided : The pipeline from the fan to the outside, drainage fan, The standby power supply, power line, transformer. Cooling oil and etc.
The working principle of microwave dryer/drying machine :
microwave is issued by the microwave generator, formed a strong magnetic field in the microwave sterilization cavity. The water molecules in the material produced high speed reciprocating motion by the polarity change in the magnetic field, friction heat, and then for the purpose of sterilization.
Packaging&Shipping:
1, Packaging Details: one Industrial tunnel dryer/microwave drying machine is fit for a 40GP.
2, Delivery Detail: One Industrial tunnel dryer/microwave drying machine needs 20 days, two dryers 30-40 days.
Our services :
1.Accept OEM service
2.Engineers available to service machinery overseas
3.Our products including:Hot air batch dryer, mesh belt dryer,tunnel microwave drying machine, microwave vacuum dryer,etc.
4. we are able to cater to all the required expectations of our valued clients .
Why Choose Us?
1.We are professional drying equipment manufacture in china,has excellent experience.
2.We have advanced machine equipment, cost savings.
3.We supply 24 hours online service to solve your every question.
4.We have the best knowledge about the drying machine in USA,UK,CANADA,SOUTH AFRICA,INDIA,AUSTRALIA,ETC.
Multi layer type continuous hot air drying machine/oven usage:
Widely used in metallurgy, building materials, ceramics, organic fertilizer, chemical and other industries, and the ideal equipment for food and vegetables drying processing.Multilayer belt type hot air dryer is used of steel net work as a transport carrier material for continuous drying equipment, the most suitable for flow operation.Due to the conveyor is a mesh, so drying rules or irregular various substance is the most appropriate (such as :coal, ore forming block, food, vegetables, etc.) .This machine not only can be used with other equipment,but also used alone.
hot air drying machine/oven features:
Multilayer belt type hot air dryers has head, drying section, tail, mesh belt, transmission device, air inlet pipe, air discharge pipe, fan (hot air source ) etc. Material is from head into chamber slowly drying by drying, mesh belt speed depending on the kinds and moisture content of the material.The wind flow adapt negative pressure , porous air intake to ensure effective drying area.Wind speed distribution uniform ,which improve the effect of drying.
Packaging&Shipping:
The continuous drying equipment will be packed in nude,motor and other parts will be packed in wooden case.
It will be delivered by air,international express or by sea!
Good package will assure you recived the goods in good condition!
Our services :
1.Accept OEM service
2.Engineers available to service machinery overseas
3.Our products including:Hot air batch dryer, mesh belt dryer,tunnel microwave drying machine, microwave vacuum dryer,etc.
4. we are able to cater to all the required expectations of our valued clients .
Why Choose Us?
1.We are professional drying equipment manufacture in china,has excellent experience.
2.We have advanced machine equipment, cost savings.
3.We supply 24 hours online service to solve your every question.
4.We have the best knowledge about the drying machine in USA,UK,CANADA,SOUTH AFRICA,INDIA,AUSTRALIA,ETC.
1. All the supplied products are provided with product certificates and instructions, including product number, technical parameters, wiring diagram,factory date, etc. Please check carefully to avoid misuse.
2. Installation should check whether the field interface is connected to the product according to the connection mode and thread type of the product.The mouth is the same. If it is a threaded interface, it should be tightened slowly and sealed carefully. Torque can not be added directly to the transmitter shell, but only on the six sides of the pressure interface.
3. The wiring should be strictly in accordance with the instructions of our company.
4.This product is a precise instrument. It is forbidden to disassemble, colide,fall,throw hard or punch the drainage hole with a sharp instrument.
5. The transmitter can work by electricity, but the preheating output is stable for 30 seconds.
6. If any abnormality is found in use, the power supply should be turned off, the use should be stopped, the inspection should be carried out, or contact our technical department direct.
7.When transporting and storing, the original packaging should be restored and stored in a cool, dry and ventilated warehouse.
8.The quality assurance period is 12 months.
Intelligent Operation Method
1. LCD shows the output percentage or process pressure. Press the S key to select the display percentage or pressure.Press Z key to select pressure unit KPa or Mpa when displaying pressure.
2. Press S+Z key for 8 seconds, then release it at the same time, press Z key to set the zero value; Press the S key set the range. note: this function can only be triggered once an operation.
3. Adjustments to zeros or ranges may cause changes in the displayed options, i.e.The percentage being displayed becomes pressure or KPa becomes Mpa, etc. All these changes are shown only in the display, and have no effect on the internal parameters of the transmitter, pressure detection and current output. After adjusting the zero point and range, the S and Z keys can be used to select the desired percentage or pressure.
4. Zero-setting in field pressure-free state: 30 seconds after pressing S+Z key, the display shows zero time at the same time release the two keys, that is, zero.
Simulated operation method
1.Zero-setting in pressure-free condition: The potentiometer with the word "zero" on the circuit board is adjusted to zero when it is displayed on the spot.(Note: Clockwise increase, counterclockwise decrease)
2.The potentiometer marked "range" on the circuit board can not be adjusted without standard pressure, so as to avoid the disorder of measurement range.
Beidou Intelligent Vehicle Location Terminal is a new generation of Vehicle Location Terminal developed by our company independently. The Vehicle Monitoring Platform can realize the application service system of positioning, tracking, monitoring and dispatching, trajectory analysis, alarm processing, anti-theft and anti-robbery, information dissemination, operation management and statistical analysis of mobile targets, which can satisfy the monitoring of mobile targets in various industries control the need of position management.
The system is suitable for electric vehicles, logistics vehicles, taxis, buses, long-distance buses, dangerous goods vehicles, shipping and other industries.
CR-602 series high temperature high pressure liquid level sensor is suitable for the continuous measurement of liquid(things) level of high pressure equipment,container in industrial production process.Transmit output 4-20mA direct standard signal. It can be directly used in connecting use and automatic control of electric â?¢ type instrument and computer. The tube is made of special material which make it can work under 250 for long time. Special designed automatic sealing structure , the greater the pressure the sealing stricter.safely avoid medium leakage.
The core components of the product are converted into standard electrical signals (generally 4-20mA) by using advanced radio frequency capacitance detection circuit to conduct precise temperature compensation and linear correction through 16-bit single-chip microcomputer. 485 communication protocol can be used in system configuration. All series of transmitters have the function of on-site calibration. Users can press the button to carry out zero point and range, so as to meet the different requirements of various complex places.
The product conforms to GB3836.4-2000ã??Electrical equipment for explosive gas environment part 4: intrinsically safe type Iã??and GB3638.1-2000ã??Electrical equipment in explosive gas environment part 1: general requirementsã??explosion-proof mark:Exdâ?¡C T6, it is suitable for 0,1,2 zones which contains â?¡A-â?¡C category,T1ï½?T6 group explosive gas mixture.This product has also been awarded explosion-proof certificate after testing qualified through national explosion-proof inspection center.
Measuring scopeï¼?0.01ï½?10m
Precision: 0.5
Pressure scope: -0.1MPaï½?32MPa
Tube temperature resistant: -50ï½?200
Tube diameterï¼?Ï?8
Tube Materialï¼?PTFE
Storage temperatureï¼?-55ï½?+125
Output signal: 4ï½?20mAã??4-20mA with HART communication , 485 communication with 4-20mA
Supply power: 12-28VDC (intrinsic safety type needs to be powered by safety grid)
Fixed wayï¼?threaded installationï¼?M20*1.5 M27*2
Flange installation: DN15,DN25,DN40,DN50,DN80, special requirements can be customized.
Beidou Intelligent Vehicle Location Terminal is a new generation of Vehicle Location Terminal developed by our company independently. The Vehicle Monitoring Platform can realize the application service system of positioning, tracking, monitoring and dispatching, trajectory analysis, alarm processing, anti-theft and anti-robbery, information dissemination, operation management and statistical analysis of mobile targets, which can satisfy the monitoring of mobile targets in various industries control the need of position management.
The system is suitable for electric vehicles, logistics vehicles, taxis, buses, long-distance buses, dangerous goods vehicles, shipping and other industries.
Technical Specifications
2.1 Terminal Technical Specifications
The series of pressure transducers use imported high-quality pressure sensors and special integrated modules, through fine temperature, zero, full range, and non-linear compensation to achieve accurate measurement and transmission of pressure changes in liquid, gas, steam and other media.
Technical Index
Measuring medium: liquid, gas, steam
Pressure range: -0.1MPA~0~60MPA
Accuracy grade: ±0.2%FS, ±0.5%FS
Stability: â?¤0.2%FS/year
Temperature drift: â?¤0.02%FS/(range 0~70)
Environment temperature: -20+85
Storage temperature: -20+85
Output signal: 4-20mA or 1-5VDC
Supply voltage: 12-40VDC
Allow overload: two times the quota voltage
Explosiveproof grade: intrinsically safeia II C T6 flameproof dII C T6
Wetware material: 316 stainless steel and 1Gr18Ni9Ti
Shell material: die casting alloy aluminum,surface epoxy spraying
Pressure interface: M20X1.5
Weight: ordinary 0.75kg, with on-site instructions 1kg
Structure Type
x1
Connection
x2x31
x4
The link mode and output signal of the compact tranmitter are as follows:
Two-wire system:
1 Positive power supply
2 Negative power supply
3 Empty
4 Shell
Three wire system:
1 positive power supply
2 Negative power supply (Negative sharing with signals)
3 Signal+
4 Shell
x5
The connection mode of aviation plug transmitter is as follows:
Two-wire system(direct outlet type)
1 Red wire connection positive power supply
2 Black wire connection negative power supply
Notice
1. All the supplied products are provided with product certificates and instructions, including product number, technical parameters, wiring diagram,factory date, etc. Please check carefully to avoid misuse.
2. Installation should check whether the field interface is connected to the product according to the connection mode and thread type of the product.The mouth is the same. If it is a threaded interface, it should be tightened slowly and sealed carefully. Torque can not be added directly to the transmitter shell, but only on the six sides of the pressure interface.
3. The wiring should be strictly in accordance with the instructions of our company.
4.This product is a precise instrument. It is forbidden to disassemble, colide,fall,throw hard or punch the drainage hole with a sharp instrument.
5. The transmitter can work by electricity, but the preheating output is stable for 30 seconds.
6. If any abnormality is found in use, the power supply should be turned off, the use should be stopped, the inspection should be carried out, or contact our technical department direct.
7.When transporting and storing, the original packaging should be restored and stored in a cool, dry and ventilated warehouse.
CR-606 fuel level transmitter (sensor) working principle
The sensing part of the CR-606 series capacitive fuel level sensor is a coaxial container. When the fuel enters the container, the capacitance changes between the sensor housing and the sensing electrode. This change is converted by the circuit and is accurate. Linear and temperature compensated, output 4-20mA standard signal is supplied to the display instrument.
CR-606 fuel level transmitter (sensor) for occasions
CR-6062 compact fuel level transmitter (sensor) industrial grade, suitable for 5MPA or below, temperature below 200, viscosity is not high fuel measurement, can be added with various protocols of communication
CR-6061 automotive-specific fuel level transmitter (sensor) is suitable for the measurement of various fuel under normal temperature and pressure. The output damping time is adjustable from 30 to 180s. It can be equipped with 485 communication.
CR-6062 standard fuel level transmitter (sensor) industrial grade, suitable for measurement below 5MPA, viscous fuel quality below 200, can be added with various protocol communication
CR-6063 high temperature and high pressure type fuel level transmitter (sensor) industrial grade, suitable for below 32MPA, temperature measurement below 250, can be attached to various protocols
CR-6061 universal fuel level transmitter (sensor) is suitable for measuring various fuel and hydraulic fuel under normal temperature and pressure, and can be equipped with 485 communication.
The product integrates GPS, CDMA (GSM), fuel sensor, temperature sensor and extended peripherals. It can replace the huge system composed of various devices such as satellite positioning vehicle terminal + fuel sensor + temperature sensor + data acquisition module. Simplify installation and reduce costs to provide a reliable solution. The whole machine has passed the harsh environmental conditions of the laboratory and the performance is stable and reliable. The product adopts high-precision GPS module and world-class communication chip. The whole machine achieves very low power consumption while operating stably and efficiently, and the running power consumption is only 3W. The product provides an extended communication interface, which can be connected to peripherals such as positive and negative sensors.
CR-605 series universal liquid level gauge is suitable for measurement of sewage, oil (sheathed tube), high viscosity, easy to crystallize, easy to adhere, changeable medium , foam or aerosol impact and other diffcult to measure situation. The whole machine does not have any movable or elastic parts with advantages of impact resistance, convenient installation, high reliability, high precision and good cost performance. It can replace the RF admittance, radar, ultrasonic, magnetostrictive and other level gauges to make accurate measurements.
The core components use advanced RF capacitance sensing circuit to convert to standard electric signal after precision temperature compensate and linear correction through inner processor. The product uses tomography technology to automatically detect the dielectric constant and temperature changes of the medium, automatically calibrate, and automatically adapt to the measured medium. In any case, you can adapt to different measurement requirements in complex locations without recalibration. And it has excellent resistance to hanging materials, anti-condensation, anti-bubble and other super adaptability. The products own protection rating is IP68, which enables long-term stable measurement in harsh environments.
CR-607 series hygienic liquid level transmitter is a special instrument customized for the food and pharmaceutical, beverage processing, brewery industry, biological products and other industries. Using standard sanitary stainless steel quick couplings and integrated PTFE probe structure, there is no sanitary dead spots on the whole product and the medium contact parts , which is the ideal product for measuring liquid level in related industries. The whole machine does not have any movable or elastic parts, features are impact resistance, convenient installation, high reliability, high precision and good cost performance. It is the most ideal product for measuring liquid level in related industries. The CR6072 product adds automatic compensation and automatic calibration function, which reduces the maintenance workload of field personnel.
CR-607 series hygienic liquid level transmitter is a special instrument customized for the food and pharmaceutical, beverage processing, brewery industry, biological products and other industries. Using standard sanitary stainless steel quick couplings and integrated PTFE probe structure, there is no sanitary dead spots on the whole product and the medium contact parts , which is the ideal product for measuring liquid level in related industries. The whole machine does not have any movable or elastic parts, features are impact resistance, convenient installation, high reliability, high precision and good cost performance. It is the most ideal product for measuring liquid level in related industries. The CR6072 product adds automatic compensation and automatic calibration function, which reduces the maintenance workload of field personnel.
CR -6062 Industrial grade fuel level transmitter (fuel level sensor) is a special instrument tailored for the accurate measurement of fuel level such as railway locomotive, automobile fuel tank, tank truck and fuel depot. The whole machine does not have any movable or elastic parts, and is resistant to impact, easy to install, high in reliability, high in precision, and good in performance and price. It can be installed in various occasions to accurately measure and control the fuel level of gasoline, diesel fuel and hydraulic fuel. It is also suitable for the measurement of various non-conductive liquids. Such products can also be used to measure conductive media in the case of particularly harsh on-site conditions, particularly severe electromagnetic interference, and particularly high agitation.
The CR-6062 industrial grade fuel level transmitter (fuel level sensor) core components are converted to standard electrical signals (typically 4-20 mA) using advanced RF capacitance sensing circuits through 16-bit microcontrollers with precise temperature compensation and linear correction. Optional HART, CANBUS, 485 communication protocol for system configuration. The full range of transmitters are self-calibrating, allowing users to automatically calibrate zero and range with two buttons or two leads to suit different requirements in complex locations.
The sensing part of the CR-6062 industrial grade fuel level transmitter (fuel level sensor) is a coaxial container that causes a change in the capacitance between the sensor housing and the sensing electrode when the fuel enters the container. This variation is passed through the circuit. The conversion is performed with precise linear and temperature compensation, and a 4-20 mA standard signal is output to the display meter.
