Find Verified Polyester Foil Suppliers, Manufacturers and Wholesalers

Name Optical brightener ERG
Class Whitening agent
Appearance Light yellow powder or liquid
Application Suitable for polyester
Shade Fluorescent white z

1. High quality for medicine and chemical powder packaging
2. Passed iso9001
3.Volume: 50ml, 100ml, 3l, 15l, 30l
4.Material: aluminum
5. Set: rubber stopper+ aluminum cap+ aluminum bottle
6. Package: pe bag, in carton box
7. Payment item: tt, lc
8. Delivery time: 15 days after deposit

Carton box:77*46.5*47cm
Quantity:30sets/box
G.W:13.26kg

1. High quality for medicine and chemical powder packaging
2. Passed iso9001
3.Volume: 50ml, 100ml, 3l, 15l, 30l
4.Material: aluminum
5. Set: rubber stopper+ aluminum cap+ aluminum bottle
6. Package: pe bag, in carton box
7. Payment item: tt, lc
8. Delivery time: 15 days after deposit

Carton box:71*48*40.5cm
Quantity:6sets/box
G.W:9.17kg

Aluminum sheet as below:

Alloy: 1050, 1060, 1070, 1100, 1200, 1035, 2024, 2a12, 2014, 2a14, 3003, 3004, 5052, 5a02, 5154, 5a03, 5456, 5a05, 5005, 5083, 5086, 5754, 6061, 6063, 6082
Temper: o, h14, h24, h18, h26, h22, t4, t6, t651
Thickness: from 0.2mm to 10mm
Width: up to 1600mm
Length: up to 6000mm
Packing: Wooden/veneer case, wooden/veneer pallet
Model: Baodi
Unit price/payment: As negotiated
Hs code: 7606
Trademark: Baodi
Origin: China
Min. Order: 2 tons
Transportation: Within 30days




Wooden pallet

Aluminum tube/aluminum pipe

Alloy: 1050, 1060, 2a11, 2017, 2a12,
2024, 3003, 3a21, 5a02, 5a05, 5456,
5052, 5083, 6061, 6063, 6082, 7a04, 7075, 7a09
Temper: o, h112, t4, t6, f
Od: 3-400mm
Wall thickness: 0.1-50mm
Length: up to 6100mm

Packing: By wooden pallet
Unit price/payment: Fob, cfr, cif
Min. Order: 1 ton
Transportation: Within 30days


Wooden pallet

Aluminum sheet

Wooden cases, pallets and so on

Copper sheet

Packed in pallet

Specs. : Size: 1-3mm( 8-16 mesh ) ; Moisture: max. 7% ; no any additives ; no foreign matters ; fully comply with EU food regulations.
Packing : 10 KGS x 2 aluminium foil bags per carton ; 14.4 MTS/20'FCL

Specs. : pure garlic ;100-120 mesh ; moisture: max.7% ;color: white ; so2:max.50ppm; no foreign matter and additives ; fully comply with eu food regulation
Packing: 12.5kgs x 2 aluminium foil bags ; 18 mts/20'fcl

Specs. : size : minced ,  8-16, 16-26,  26-40, 40-80mesh; moisture: max.7% ; so2:max. 50ppm; no foreign matter and additives ; fully comply with eu food regulation .
Packing: 12.5kgs x 2 aluminium foil bags ; 18mts/20'fcl

A special brass alloy is hot rolled to eliminate plate tensions, cold rolled to the tightest tolerance and flattened. It enables you to produce sophisticated three-dimensional sculptured embossing or combination embossing or foil stamping dies. Our brass plate is with good mechanical durability, dimensional stability, minimum thermic expansion and exceptional heat conductivity.

(1) Polycaprolactone-based TPU
(2) Polycarbonate-based TPU
(3) Polyester -based TPU
(4) Polyether-based TPU

MOQ:5000PCS 0.90USD/PCS

nature silk dental flosser dental floss glass bottle with cutter
1.Glass bottle shaped dental floss
2.floss material: polyester/nylon/ptfe/nature silk.
3.Private logo can be designed and glass bottel
4. there are many flavors:mint,lemon,green tea,and fruits

floss material
floss length
wax
flavor
package
Bamboo-charcoal
20M
WAX/UNWAXED
mint
many packaged availbale
Polyester(dacron)
lemon
Nylon
green tea
PTFE
apple
UHMWPE
peach
Expansion
Aloe
Twined-line
other fruits flavor

Fluorescent whitening agent OB-1 is yellow crystal, insoluble in water, odorless, stable performance, the maximum absorption wavelength of 374nm, with a strong fluorescence, emission wavelength of 434nm.
Product Description
Optical brightener OB-1
specification:
Item Specification
Name Optical brightener OB-1
Class Whitening agent
Appearance Yellow powder
Application Suitable for polyester and plastic
Fineness 300mesh

z

1). Combined - type fence design.

2). Galvanization treatment at the welding point.

3). Hot-dip zinc treatment both inside and outside the pipe. The thickness of zinc is ¡y70|¨¬m, then spray epoxy powder, the thickness is ¡y0.04mm, then spray anti-ultraviolet polyester powder as the surface, the thickness is ¡y0.04mm. You have no warroies about rustness.

Size: 1.0*1.5m
Dimension: 40*40*1.0 post, 19*19*0.7 pickets, 32*32*1.0 rail

1. Thermal insulation foam board:
Eps(expanded polystyrene), xps(extruded polystyrene ) insulation board for building wall, roof, ground thermal insulation layer etc. Fireproof phenolic foam and pu thermal insulation for floor and inner wall and roof.

2. Sandwich panel:
Mid section is insulation foam board(eps.Xps, pu, phenolic foam, rock wool board)
With outside composite(galvanized sheet, megnesium oxide board, calcium silicate board, aluminium foil, aluminium sheet and so on)
Xps sandwich panel, mgo sandwich panel, pu sandwich panel and rock wool sandwich panel for wall and roof of clean room, warehouse, cold room and refrigeratiom house etc.

3. Insulated building wall panels:
Decorated surface with firproof foam/ thermal insulation foam. Any kind material can be customized for a exterior wall decoration insulated composite panel.
Shandongwanlongatgmail.Com

Pallet or as your request

1. Specification:
(1).Floss material: nylon 630-720d / polyester 630-720d
(2).Floss length in max: 40m
(3).Available in waxed and mint waxed
(4).Flavor: mint, bubblegum, aloe vera flavor or as customizable
(5).Casing material: abs
(6).Casing size: 54*86*5mm
(7).Color: white
(8).Spool cannot be replaced
(9).With blade easy to cut the floss
(10).Packing:
1.1000 pieces per shipping box
2.Customized package
2. Certificate: iso9001:2008 / fda / sgs

100% high tenacity polyester.
Thermo-fixation to minimize elongation and to stop ingression of dirt causing damage.
Colour coded as per en1492-1, and striped with wll indicator.
Full manufactured and tested to en 1492-1 standard.
Each sling is individually numbered with an unique serial number and certificate.
Available:
Safety factor of 8:1, 7:1 and 6:1 webbing slings.
Single ply, double ply or 4 ply slings in eyed or endless type.
With or without sling eye protection, also full sling length sewn webbing protection.


Shrink film packing

100% high tenacity polyester
Double ply sling wall cover to protect from wear and ingression of dirt causing damage
Colour coded as per en1492-2, and striped with wll indicator.
Full manufactured and tested to en 1492-2 standard.
Each sling is individually numbered with
An unique serial number and certificate.

Available:
Safety factor 7:1 and 6:1.
Single or double ply sling wall cover.
Concealed sewn label to protect label from tearing.
Larger sizes up to 50 tonnes sling also available upon request.


Shrink film

1.Product description

Newfill-0201, fine is precipitated barium sulphate with a defined particle size from highly purified solutions of barium salts to sodium sulfate. Newfill-0201, fine has all the characteristics of remarkable technological value (brightness, fineness, oil absorption, dispensability, high pvc, aging resistance, low abrasiveness ect). Newfill-0201super fine is free of impurities such as quartzes etc.

These products can be used for powder coatings, industrial paints, enamels, printing ink and plastically materials, and photosensitive papers, can be used quite successfully in adhesives, coatings and sealants.

2. Product specification


Appearance white powder
Barium sulfate (%) = 98%
Whiteness: =97±0.5
Total iron (%) =0.006
Brightness (%) >97.0
Sulfide content (%)

General Features:
100% fine powder rework ability
Note: Machine capacity will drop to 50-60% of nominal capacity in fine powder feeding.
PID temperature control sys. Dual temperature, Accuracy ±2 (Auto control)
Soft Water Closed circuit cooling system
Self-cleaning sys.
High disperse efficiency.
Openable barrel
Feeding sys. Variable speed by means of inverter
Screw variable speed by means of inverter
Saftey devices:magnetic Iron remover overload protection
Configuration of this line:
Siemensor ABB brand electro-motor (as per customer request)
Schneider brand electrical component
Schneider brand inverter
Siemensbrand PLC
Airtacbrand control valve
CE & ISO Standard
Note: All electrical component, electro-motor, PLC, etc are original brand made in China

CE Certificate
CE Certificate authorized by APRAGAZ Inspecting Authority from Belgium

Sira Certification Service
The Quality Management System of Yantai Yuanli Machinery Manufacturing Co., Ltd. has been assessed by Sira Certification Service and found to comply with GB/T19001-2008 idt ISO9001:2008 for the Design, manufacturer and sales of electrostatic power production equipment.

Services:
Yuanli Manufacturing Company Provide below services:

After-sale Service: Turnkey Project

-Technical Support Online Service Provided

According to customer’s requirement, we provide layout (plant designer), excellent mechanical engineer, excellent electrician, etc.

-On-site Training Service Provided

In customer factory, we provide all kinds of training, including installation, commissioning

-Long-term Maintenance Provided

In the area of maintenance, we offer needs-oriented and standardized maintenance packages, such as the overhaul of components, gearboxes, in order to guarantee the safe and economic operation of plant and machinery.

-Spare Parts Replacement and Repair Service Provided

Providing spare parts for all kinds of powder coating processing equipment in long-term. And can provide tailored made spare parts according to customers’ requirements. Ensure advanced craft, good material and high precision.

-Formulation Provided (our advantage)

Some customers are worried their final products if can get best result, we have our own formulator (Engineer for powder coating formulation) who is testing and updating the formulation according to customer requirement all the time. And have very good experience for the formulation to support customer to make different effect powder coatings.

-If you have any comments about our product ,please contact us and we are glad to help you. We sincerely welcome customers from all over the world come to visit and negotiate with us. Thank you so much!

Brief Introduction:
As a first and pioneer powder coating machinerymanufacturer in China,Yantai Yuanli Machinery Manufacturing Co., Ltd.was founded in 1988 with the following ability:
13000m2 of factory; 5500 m2of workshop
Advance NC and CNC machine shop; High qualified employees
More than 10,000 complete lines have been supplied to China domestic market
More than 100 complete lines have been exported to USA, Germany,Uk,
Turkey,Iran,India,Pakistan,Malaysia,Poland,Vietanam,Italy,etc.
The supplier of very famous brand powder coating producer in China
ISO 9001:2008,CE standard

Yuanli Brand FHJ-1000A Auto Pre-Mixer Series:
Yuanli is the professional Auto Pre-Mixer producer,below is the technical data:

Main characteristic:

1. Mobile hoppers to provide continuous loop production

2.High automatic: positioning, lock, overturning mixing and tank replacement

3. PLC control

4. Sufficient mixing, no solid powder

5. High efficiency

6. Easy to clean(for changing color)

7. Safe operation

8. Manual and auto two working way

Our Advantage
1. Formulation Provided
Some customers are worried their final products if can get best result, we have our own formulator (Engineer for powder coating formulation) who is testing and updating the formulation according to customer requirement all the time. And have very good experience for the formulation to support customer to make different effect powder coatings.

2. Manufacturing Technique
We make machining part in our own factory to control the quality of the machine parts to make sure the machine's quality. We have a presence in over 15 countries and are a technology driven organization with an extensive staff of highly experienced R&D and technical service personnel in Asia, Europe and the Americas.

3. After-sale Service
We can provide a variety of services to our customers, such as our engineer abroad installation service, technical support online service, on-site training service, long-term maintenance service, spare parts replacement & repair service.

This Powder Coating Production Line works as following process

Raw material--Pre-Mixer--extruder--Cooling Band--Grinding System--Powder Coating

Introduction of Company

Yantai Yuanli Machinery Manufacturing Co., Ltd. with more than 27 years experiments, offer wide range of services in powder coating field from A to Z including know-how, technology, machinery, raw material, technical support.

Our product has been supplied all around China and exported to international market like, Italy, Iran, Turkey, India, Thailand, Egypt, Malaysia, Czech, Poland, Russia, USA.

As the first and pioneer of powder coating production machinery supplier in China, Yantai Yuanli Machinery Manufacturing Co., Ltd. with very good reputation in domestic and overseas, supplying high quality machines and services.

Our Services

Yuanli Manufacturing Company Provide below services:
After-sale Service: Turnkey Project
-Technical Support Online Service Provided
According to customer’s requirement, we provide layout (plant designer), excellent mechanical engineer, excellent electrician, etc.
-On-site Training Service Provided
In customer factory, we provide all kinds of training, including installation, commissioning
-Long-term Maintenance Provided
In the area of maintenance, we offer needs-oriented and standardized maintenance packages, such as the overhaul of components, gearboxes, in order to guarantee the safe and economic operation of plant and machinery.
-Spare Parts Replacement and Repair Service Provided
Providing spare parts for all kinds of powder coating processing equipment in long-term. And can provide tailored made spare parts according to customers’ requirements. Ensure advanced craft, good material and high precision.
-Formulation Provided (our advantage):
Some customers are worried their final products if can get best result, we have our own formulator (Engineer for powder coating formulation) who is testing and updating the formulation according to customer requirement all the time. And have very good experience for the formulation to support customer to make different effect powder coatings.
-If you have any comments about our product ,please contact us and we are glad to help you. We sincerely welcome customers from all over the world come to visit and negotiate with us. Thank you so much!
Contact information

Main Characteristic

1. Hand hydraulic pressure barrel; Easy to change color and cleaning
2. Three zone PID temperature control accuracy ±1°C
3. Cooling water system inside the screw
4. Separately cooling water system in barrel No. 3 zone to avoid block water passage
5. Gear box equipped with lubricating system
6. Gear box equipped with water cooling system
7. Feeding area has permanent magnetic metal remover
8. Extruder noise lower than =80dB

Main Technical Characteristic

1.The changing during moving gap is zero

2. High disperse efficiency

3. Self-cleaning system

4. Double temperature PID control, control accuracy ±2°C

5. Barrel equipped with soft water recycle automatic cooling system

6. Low noise and high secure gear box system

7. Equipped with permanent magnetic iron remover

8. Low material consumption, electricity and material rate kg/h.kw is higher

Main Technical Parameter

Model
SFJ-46A or B
SFJ-55A or G
SFJ-64A or G
SFJ-80G
Screw diameter(mm)
46
55
64
80
Length-diameter(L/D)
14:1
16:1
15:1
15:1
Capacity(Kg/H)
100~180 or 100~280
300~400
400~500
600~800
Screw motor power(kw)
15, 6 or 22, 4
30
45
55
Feeding motor power(kw)
0.37
0.37
0.55
0.55
Heating power(kw)
0.75*4
0.75*6
1*5+0.75*1
2*5+1.5*1
Mixing motor power(kw)
-
0.37
0.37
0.37
Screw speed(rpm)
0~500/0~800
0~500
0~500
0~500
Temperature control system
±2°C Double temperature PID auto-control. Accuracy ±2
Speed adjust system
Adjustable speed by means of frequency inverter
Feeding system
Variable by means of frequency inverter
Cooling system
Water cooled
Equipped with
Screw feeding
Permanent strong-magnetic device
Overall dimension(mm)

2650*900*1900
2900*900*2000
3600*950*2260
-If you have any comments about our product ,please contact us and we are glad to help you. We sincerely welcome customers from all over the world come to visit and negotiate with us. Thank you so much!

As the first and pioneer of powder coating production machinery supplier in China, Yantai Yuanli Machinery Manufacturing Co., Ltd. with very good reputation in domestic and overseas, supplying high quality machines and services.

Yuanli Brand FHJ-600G Auto Pre-Mixer Series
Yuanli is the professional Auto Pre-Mixer producer,below is the technical data:

Main characteristic

1. Mobile hoppers to provide continuous loop production
2.High automatic: positioning, lock, overturning mixing and tank replacement
3. PLC control
4. Sufficient mixing, no solid powder
5. High efficiency
6. Easy to clean(for changing color)
7. Safe operation
8. Manual and auto two working way

Application
This machine will improve production efficiency and decrease work intensity in mixing process.

Services

Yuanli Manufacturing Company Provide below services:
After-sale Service: Turnkey Project
-Technical Support Online Service Provided
According to customer’s requirement, we provide layout (plant designer), excellent mechanical engineer, excellent electrician, etc.
-On-site Training Service Provided
In customer factory, we provide all kinds of training, including installation, commissioning
-Long-term Maintenance Provided
In the area of maintenance, we offer needs-oriented and standardized maintenance packages, such as the overhaul of components, gearboxes, in order to guarantee the safe and economic operation of plant and machinery.
-Spare Parts Replacement and Repair Service Provided
Providing spare parts for all kinds of powder coating processing equipment in long-term. And can provide tailored made spare parts according to customers’ requirements. Ensure advanced craft, good material and high precision.
-Formulation Provided (our advantage):
some customers are worried their final products if can get best result, we have our own formulator (Engineer for powder coating formulation) who is testing and updating the formulation according to customer requirement all the time. And have very good experience for the formulation to support customer to make different effect powder coatings.

CE Certificate
CE Certificate authorized by APRAGAZ Inspecting Authority from Belgium
Sira Certification Service
The Quality Management System of Yantai Yuanli Machinery Manufacturing Co., Ltd. has been assessed by Sira Certification Service and found to comply with GB/T19001-2008 idt ISO9001:2008 for the Design, manufacturer and sales of electrostatic power production equipment.

-If you have any comments about our product ,please contact us and we are glad to help you. We sincerely welcome customers from all over the world come to visit and negotiate with us. Thank you so much!

MF N Grinding System Series
Main characteristic:
1. Openable main grinding case for easy access to inside parts for cleaning and maintenance
2. Openable top cap by means of electromotor for easy access to internal parts of cleaning
3. Perfect particle size distribution
4. All parts to be in contact with powder coating made from stainless steel
5. Equipped with famous brand electrical parts
6. Equipped with tracking suspended sieve
7. Classifier never stick with powder
8. Two kinds of pulse time setting

Main Technical Parameter:
Main specification
Model
MF-10N
MF-15S
MF-20/25S
MF-30S
MF-35S
MF-40/50S
MF-60S
Main motor power(kw)
7.5
11
15
22
22
30/37
45 2
Pin disk speed(rpm)
7000
6500
6000/4500
4500
4000
4000
2900
Classifier motor power(kw)
1.1
2.2
3
3
4
4
4
Classifier speed(kw)
0~2800
Feeding motor power(kw)
0.55
0.55
0.55
0.55
0.75
0.75
0.75
Grinder cover motor power(kw)
0.18
0.18
0.18
0.25
0.25
Discharge motor power(kw)
0.37
Rotary sieve motor power(kw)
1.5
Blower motor power(kw)
7.5
11
15/22
22
30
30/37
45
Blower flow rate(m3/min)
20
30
40/70
70
76
80
Seperating efficiency
=98%
Particle size MESH
120~350
Capacity(kg/h)
100~150
150~200
200~300/300~400
400~500
500~600
600~800
800~1000
Services
Yuanli Manufacturing Company Provide below services:
After-sale Service: Turnkey Project
-Technical Support Online Service Provided
According to customer’s requirement, we provide layout (plant designer), excellent mechanical engineer, excellent electrician, etc.
-On-site Training Service Provided
In customer factory, we provide all kinds of training, including installation, commissioning
-Long-term Maintenance Provided
In the area of maintenance, we offer needs-oriented and standardized maintenance packages, such as the overhaul of components, gearboxes, in order to guarantee the safe and economic operation of plant and machinery.
-Spare Parts Replacement and Repair Service Provided
Providing spare parts for all kinds of powder coating processing equipment in long-term. And can provide tailored made spare parts according to customers’ requirements. Ensure advanced craft, good material and high precision.
-Formulation Provided (our advantage):
Some customers are worried their final products if can get best result, we have our own formulator (Engineer for powder coating formulation) who is testing and updating the formulation according to customer requirement all the time. And have very good experience for the formulation to support customer to make different effect powder coatings.

1.Specification:
(1).Floss material:
Nylon66, Dupont nylon, Polyester, UHMWPE (traditional floss), Expanding floss, PTFE, Natural silk floss,
Charcoal floss selectable
(2).Floss length in max: 20M
(3).Available in Waxed, Unwaxed, and Mint Waxed, food grade
(4).Flavor: Mint, bubblegum, aloe vera flavor or as customizable
(5).Casing material: Food grade PP material
(6).Casing size:100*30mm
(7).Color: Transparent white
(8).Spool can be replaced
(9).With blade easy to cut the floss
(10).Packing:
1.Individually blister packed with inner box
280 pieces per shipping box
2.Individually blister packed without inner box
500 pieces per shipping box
3.Customized package
2. Certificate: ISO9001:2008 / FDA / SGS

Crosslinking agent TAIC crosslinking agent, vulcanizing agent
Scientific name: Triallyl isocyanurate
English Name: Triallyl isocyanurate
CAS NO: 1025-15-6
Molecular formula: C12H15N3O3
Indicators:
project
Indicators: Industrial products
Premium grade
Quality grade
Powdering
Appearance: yellowish liquid, yellowish liquid, yellowish crystal, white powder
Content (> 96% > 98% > 99% > 70%)
Acid value < 1.0 mg KOH/g < 0.5 mg KOH/g < 0.1 mg KOH/g < 0.5 mg KOH/g < 0.5 mg KOH/g < 0.5 mg KOH/g
Purpose:
1. Crosslinking and modification of polyolefins:
Crosslinking and modification of polyethylene, polypropylene, polyvinyl chloride and polyphenylethylene can improve heat resistance, mechanical strength, corrosion resistance and solvent resistance.
2. Vulcanization aids for special rubber:
Ethylene-propylene binary or ternary ethylene-propylene rubber, fluorine rubber, silicone rubber, polyurethane and other special rubber efficient vulcanization crosslinking agent, using TAC as vulcanizing agent (DCP, BIBP), the general amount of 1.0-3% can significantly shorten the vulcanization time, improve mechanical properties, wear resistance, weather resistance and solvent resistance, especially for EPDM vulcanized with peroxide can provide sulfur-aiding. The effect of vulcanization can increase the vulcanization rate and prevent scorching.
3. The crosslinking agent of unsaturated polyester FRP:
Hot-pressed unsaturated polyester FRP with a small amount of TAIC as crosslinking agent can significantly improve the heat resistance and mechanical strength, and the heat resistance can be increased to more than 200 C.
4. Polyphenylethylene dilute internal plasticizer:
By copolymerization with TAIC, soft products with good heat resistance can be prepared, which can fundamentally change the main shortcomings of ordinary polyphenylethylene.
5. Intermediates:
The intermediate of TBC and TCC can also be used to synthesize light curing coatings, new heat and weather resistant coatings of photoresist, etc.
Packing: 25kg/barrel, 200kg/barrel

1. Specification:
(1). Floss material: Nylon, Polyester
(2). Floss length in max: 50M
(3). Available in Waxed, Mint Waxed
(4). Flavor: Mint, bubblegum, aloe vera flavor or as customizable
(5). Casing material: Food grade PP material
(6). Casing size: Diameter 50mm, pocket size for personal use, easy to carry and more hygeian,convenient travel size in new hygienic container with sanitary cap
(7). Color: Choose from 4 colors: green, light green, yellow, white or as customizable
(8).Inside spool can be replaced
(9).With blade easy to cut the floss
(10). Packing:
1.Single packing in individually plastic bag
1300 pieces per shipping carton box
2.Full blister or half
576 pieces per shipping carton box
3.As customized package
2. Certificate: ISO9001:2008 / FDA / SGS

1. Specification:
(1). Floss material:
Nylon66, dupont nylon, polyester, uhmwpe (traditional floss), expanding floss, ptfe, natural silk floss,
Charcoal floss selectable
(2). Floss length in max: 50m
(3). Available in waxed, unwaxed, and mint waxed
(4). Flavor: mint, bubblegum, aloe vera flavor or as customizable
(5). Casing material: food grade pp material
(6). Casing size: diameter 50mm, pocket size for personal use, easy to carry and more hygeian,
Convenient travel size in new hygienic container with sanitary cap
(7). Color: choose from 4 colors: green, light green, yellow, white or as customizable
(8).Inside spool can be replaced
(9).With blade easy to cut the floss
(10). Packing:
1.Single packing in individually plastic bag
1300 pieces per shipping carton box
2.Full blister or half
576 pieces per shipping carton box
3.As customized package
2. Certificate: iso9001:2008 / fda / sgs

1. Specification:
(1).Floss material:
Nylon66, dupont nylon, polyester, uhmwpe (traditional floss), expanding floss, ptfe, natural silk floss,
Charcoal floss selectable
(2).Floss length in max: 20m
(3).Available in waxed, unwaxed, and mint waxed
(4).Flavor: mint, bubblegum, aloe vera flavor or as customizable
(5).Casing material: food grade pp material
(6).Casing size: 38*27mm with 45mm keychain or not, pocket size for personal use, easy to carry and more hygeian convenient travel size in new hygienic container with sanitary cap
(7).Color: choose from 4 colors: green, light green, yellow, white or as customizable
(8).Spool can be replaced
(9).With blade easy to cut the floss
(10).Packing:
1.Single packing in individually plastic bag
2000 pieces per shipping carton box
2.Full blister or half
512 pieces per shipping carton box
3.As customized package
2. Certificate: iso9001:2008 / fda / sgs

Chemical name :

Bis(1, 2, 2, 6, 6-pentamethyl-4-piperidinyl)-sebacate and 1-(methyl)-8-(1, 2, 2, 6, 6-pentamethyl-4-piperidinyl)-sebacate

Molecular formula : c30h56n2o4

Chemical structure :

Molecular weight : 509

Cas no : 41556-26-7 / 82919-37-7

Physical properties £º

Appearance : clear, slight yellow liquid

Content of dimer & mono : ¡ý 96%

Chroma:<30

Transmittance: 425nm¡ý95% 450nm¡ý97% 500nm¡ý98%

Toxicity £ºrat ld 50>2000mg/kg body weight taking orally

Use :

Uv-292 liquid hindered amine light stabilizer which is widely used to improve the weatherability of a variety of polymers. Uv-292 is highly effective used for a wide range of polymers and applications including polyurethanes, sealants, adhesives, pmma , elastomers, unsaturated polyesters, acrylics, vinyl polymers(pvb, pvc). It¡¯s especially applied in polyurethane , because it has good compatibility in solvent

Hindered amine light stabilizer, mainly used in paints and printing ink, especially developed for coating. It¡¯s efficiently provides significantly extended life time.


25kg/plastic drum

Purpose
This test kit is used for making qualitative test for COVID-19 antigen in human nose swab and throat swab samples. It acts as an early-stage aided diagnostic kit for clinical patients infecting COVID-19, yet it does not stand for the basis for confirming COVID-19.
Sample requirements
When using sterile swab for collecting samples, polyester sponge swab with PP bar is recommended when collecting nose swab and throat swab. When collecting nose swab, the swab will be gently inserted into the nose palatine and stay for a moment, and then gradually rotate it until it is taken out. When collecting throat swab, the swab will be completely inserted into the throat from the mouth, then inspectors will wipe pharyngeal tonsil on both sides and posterior wall of pharynx with appropriate strength, and finally take the swab out. During this process, please avoid touching the tongue. After collecting the samples, please make processing with viral transport medium or sample diluent provided in the test kit as soon as possible, and complete test within five minutes.
Test principle
This test kit adopts the principle of high-specificity antigen-antibody reaction and colloidal gold labelling and immunochromatographic test strip techniques. The reagent contains COVID-19-NP antigen monoclonal antibody pre-fixed in film test area and COVID-19-NP antigen monoclonal antibody-colloidal go