silicone rubber heater is a kind of thin film which heats upon electrified, in a standard thickness of 1.5mm, Adopting nickel chrome wires or 0.05 mm~0.10mm thick nickel chrome foils etched to some certain shapes, the heating component is wrapped with heat conducting and insulating materials on both sides, and completed in high-temperature die forming and aging heat treatment. Due to its high reliability, the product is highly competitive when comparing with other electric heating film products which normally have paste materials such as graphite paste or resistor paste, etc. coated on insulation materials. As a kind of soft red film which can be applied closely on different curved surfaces, the silastic heater can be fabricated in varies shapes and powers.
Connector body with hexagonal wrench surface, thread ISO metric in accordance with EN60423 or thread NPT in accordance with ANS/ASME B1.20.1-1983, hexagonal pressure nut, sealing ring and ferrule
Simple, one piece installation provides a quick and reliable liquid-tight seal
IP rating from IP40 to IP66/67 in combination with the corresponding flexible conduits
High mechanical strength
Highly liquid-tight and dustproof
Vibration and tensionproof
Inherently low fire hazard
Covering of the conduit ends
Temperature range from -40oC to +125oC
Available in straight, 45o and 90o bodies
Available in ISO Metric and NPT threads
*Applications:
General indutrial and commerical electrical wiring protection
Machining centres and robotics
any narrow space in static applications
General wiring for OEM applications
Low fire hazard applications
Underflooring wiring in office buildings
Machine tools
Installations where liquid-tight is a requirement
Outdoor installation
Special Applications:
According to customer's samples and specifications, we can manufacture special fittings for suit any type of flexible conduit applications.
Structure:
Connector body with hexagonal wrench surface, thread ISO metric in accordance with EN60423 or thread NPT in accordance with ANS/ASME B1.20.1-1983, Comply with stands AS/NZS 2053. 8, hexagonal pressure nut, sealing ring and ferrule.
Material:
Connector body -Brass
Hexagon pressure nut - Brass
Sealing ring - Nylon 66
Ferrule - Galvanized steel
Features:
Simple, one piece installation provides a quick and reliable liquid-tight seal
IP rating from IP40 to IP66/67/68 in combination with the corresponding flexible conduits
High mechanical strength
Highly liquid-tight and dustproof
Vibration and tension proof
Inherently low fire hazard
Covering of the conduit ends
Available in straight, 45o and 90o bodies
Available in ISO Metric and NPT ã??PFã??PGï¼?BSP etc. threads
Applications:
General industrial and commercial electrical wiring protection
Machining centers and robotics
any narrow space in static applications
General wiring for OEM applications
Low fire hazard applications
Under flooring wiring in office buildings
Machine tools
Installations where liquid-tight is a requirement
Outdoor installation
Special Applications:
According to customer's samples and specifications, we can manufacture special fittings for suit any type of flexible conduit applications.
Specifications:
5/16"-2"
Suitable flexible conduits:
VJ type of vacuum jacketed flexible conduit
LT type of liquid-tight flexible conduit
FM type of flexible metallic conduit
550 Nickel Powder Suppliers
Short on time? Let Nickel Powder sellers contact you.
Structure:
Connector body with hexagonal wrench surface, thread ISO metric in accordance with EN60423 or thread NPT in accordance with ANS/ASME B1.20.1-1983, Comply with stands AS/NZS 2053. 8, hexagonal pressure nut, sealing ring and ferrule
Features:
Simple, one piece installation provides a quick and reliable liquid-tight seal
IP rating from IP40 to IP66/67/68 in combination with the corresponding flexible conduits
High mechanical strength
Highly liquid-tight and dustproof
Vibration and tension proof
Inherently low fire hazard
Covering of the conduit ends
Available in straight, 45o and 90o bodies
Available in ISO Metric and NPT ã??PFã??PGï¼?BSP etc. threads
Applications:
General industrial and commercial electrical wiring protection
Machining centers and robotics
any narrow space in static applications
General wiring for OEM applications
Low fire hazard applications
Under flooring wiring in office buildings
Machine tools
Installations where liquid-tight is a requirement
Outdoor installation
Special Applications:
According to customer's samples and specifications, we can manufacture special fittings for suit any type of flexible conduit applications.
Specifications:
5/16"ï½?2"
Suitable flexible conduits:
VJ type of vacuum jacketed flexible conduit
LT type of liquid-tight flexible conduit
FM type of flexible metallic conduit
Special Features: The device can transport dry fluidity powder material in any distance. The transport ability is 1500m3/h. It is widely used in building material, metallurgy, light chemical and feed industries etc. to feed or transport cement, powder coal and flour of milling and stove. But it is not suitable for the material of great granularity, big washiness and bad fluidity. The device is divided into three layers. Puff layer is below the device, transport material layer is above and ventilate layer is in the center of device. Low pressure and little volume air supplied by wind machine flow from puff layer to ventilate layer, making the material flowing and realize the moving of material. It has the features of little cost of energy, no noise, no pollution, no lubrication, low maintain ratio, high carrying ability, lightweight, saving effective place, agility to dispose wire and easy to change transport direction. It is only can transport in certain angles, not upwards. Otherwise please choose air-elevating system. Great obliquity is good for transporting if the technics disposal permits. Obliquity is always 4 ï½? 6%. Commendatory obliquity is more than 10% when transport coarse material.
Special Features: The valve, which is also named separating material machine, is widely used in building material, metallurgy, mining, light industry and food industries etc. It is the ideal equipment to change flow direction of solid crystal and powder material in transportation system. The valve is welded in fine steel and equipped with different actuators according to the different demands. It has the features of lightweight, antifriction, definite indicating direction, handy switching and flexible operation etc. Type is side three-way liuzi, type is face three-way liuzi, type is four-way liuzi. The driving types are five: S denotes manual, D denotes electric, Z denotes automatic, Q denotes pneumatic and Y denotes electric hydraulic
Special Features: The valve is welded in stainless steel and fine carbon steel, having double layers keeping temperature lining made in fire material. It also has the features of resistant to the high temperature, efficient in saving thermal energy, impact structure, easy to open and close and handy to operate. The valve's driving mode is part. Part driving device cannot be controlled and can be installed refer to the user's demand. Driving type is windlass elevating (open-close signal), electric actuator elevating (4~20mA current signal), electric hydraulic, electric draw stem elevating (open-close signal). Suitable temperature: 700, Suitable medium: High temperature gas including Smoke, air, gas with powder, etc
Spirulina is a superfood. It is the most nutritious, concentrated whole food know to humankind.It is truly an amazing food, full of nutritional wonders.
Soy-based powder is the most common commercial lecithin powder. A typical 9.6-gram, 2-tablespoon serving of soy lecithin powder contains 67 calories, nearly 69 percent of which come from fat. Six of the 8 grams of fat in the powder are heart-healthy polyunsaturated fat. Soy lecithin contains no protein or cholesterol and only a trace amount of carbohydrates.The demand of sunflower based powder is increasing these days.
Soy lecithin powder
Acetone insoluble( w/%)95
Loss on drying (w/%) 2.0
Hexane insolubles( w/%)0.3
Acid value(mgkoh/g) 35
Peroxide value(meq/kg) 10
Heavy metals (lead) ( mg/kg )1.0
Arsenic( mg/kg ) 0.1
Total plate count (cfu/g) 1000
Yeast & mold (cfu/g) 30
E.Coli (mpn/100g) 100
Salmonella/mrsa not detected
Shigella not detected
Sunflower lecithin powder
Acetone insoluble( w/%)95
Loss on drying (w/%) 2.0
Hexane insolubles( w/%)0.3
Acid value(mgkoh/g) 36.0
Peroxide value(meq/kg) 10.0
Heavy metals (lead) ( mg/kg ) 20.0
Arsenic( mg/kg ) 3.0
Total plate count (cfu/g) 3000
Yeast & mold (cfu/g) 100
E.Coli (mpn/100g) 100
Salmonella/mrsa not detected
mesh: 200mesh to 32mesh
fixed carbon: 85 to 99.5%
S: 50ppm to 1500ppm
Expension rate: 150 to 400ml/g
Oversize: 70 to 80%
volitlematter: 14 to 16%
PH: 3-5
Product: Tomato Powder
Packed in aluminum foil bags: 10kgs*2/carton, 750 cartons/20GP or 700cartons/20RH
Delivery time: within 14 days after receiving advance payment.
Specification:
Moisture: 5% max
Lycopene: 100mg/100g min
Ash: 12% max
Total bacteria: 1000CFU/g max
Coliform bacteria: 3MPN/g max
Yeast & Mould: 50CFU/g max
Name: High Temperature Saving Energy Gate Valve
Special Features: The valve is welded in high strength heat-resistant steel, stainless steel and fine carbon steel. It is high-temperature resistance, high in strength, effective, endurance, handy to operate, definite direction, easy to maintenance and long life. High pressure cooling air device cools the disc and ensures its rigidity and non-distortion. The valve has two driving mode: integer and part. The integer driving device is fixed on the undercarriage. Part driving device canâ??t be controlled and can be installed refer to the userâ??s demand. Driving type is windlass elevating (open-close signal), electric actuator elevating (4ï½?20mA current signal), electric hydraulic, electric draw stem elevating (open-close signal). Suitable temperature: 350, Suitable medium: High temperature gas including Smoke, air, gas with powder, etc.
550 Nickel Powder Suppliers
Short on time? Let Nickel Powder sellers contact you.
