Material: low carbon steel wire, stainless steel wire, aluminum alloy wire.
Weaving: woven diamond pattern provides strong, durable and flexible construction. The closely spaced diamond mesh construction gives your fence linear strength and springy texture to protect horses from injury and prevent predators from entering paddocks and pastures.
Material: black/electro gal./hot dip gal. Iron wire
Features: it has fine features of neat & precise, sturdy structure, durable rust-resistant and fine anti-corrosiveness.
Applications: it's widely used in industry, agriculture, building, house fencing, machinery enclosures fence, also used in filtering liquid and gas, sieving grain.
Procedures: hot dip gal. Before/after weaving, electro gal. Before/after weaving
Technical note:
1, standard roll length: 30m;width: 0.5m to 1.8m.
2, special sizes available at request
3, packing: in waterproof paper in rolls. Custom packing available at request
4, welded panel: width: up to 2.5 meter length:100í» or by request
Diameter 3.0mm mesh 20*20mm surface treatment as your required
The Digital satellite finder is a professional, quality made instrument for setting and aligning a satellite dish to any satellite. According to parameters of the satellite, you can set and align a satellite dish very accurately, quickly and conveniently.
Features as follows:
1. Graphic user interface, Designed to be very easy to use.
2. With Fast and easy menu structures. It can calculate Azimuth, Elevation and Polarization automatically according to local longitude and latitude and show these details on the colour LCD display.
3. It can communicate with your PC through the serial port and you can update new satellite parameters conveniently.
4. With A Large memory capacity you can pre-store 80 satellite!íÑsparameters and 40 measurement records.
5. With the high quality LCD screen you can watch the TV channel from the satellite you are testing. This is giving the ultimate verification that the satellite you are looking at is the correct
one.
The Signal Analysis Meter is a full-featured handheld signal performance meter providing a complete signal test system in easy-to-carry protective case. Signal Analysis Meter allows choice of 4 pre-programmed user-selectable band plans accessed via keypad entry for easy measurement of broadcast, CATV, CATV/HRC, and SUB/VHF channels. Direct-entry channel or frequency tuning selections provide maximum flexibility in head-ends and distribution networks that employ narrow digital signals or non-standard frequency applications. The meter displays instantaneous digital signal levels when testing digital carrier levels. The large LCD screen displays signal level as a bar-graph with digital numeric readout. This backlit display provides screen illumination in dimly lit work-spaces, allowing behind rack and night meter operation. Signal Analysis Meter enables testing of carrier-to-noise, multiple channels, and full, reduced, and single band scan for complete testing flexibility. The meterí»s functions include not only signal measurement when AC/DC voltage is present under test, but, when selected, voltage-level display.
Full-channel operation 5-870MHZ Frequency Range
4-keypad channel plans (TV, CATV/STD,CATV/HRC,SUB/VHF) enable quick switching between sources
Single keypad frequency or channel selection provides compatibility with channel, data, and other narrow bandwidth carriers
Full spectrum-analyzer scan provides display of up to 100 channels simultaneously
Carrier-to-noise testing provides accurate testing of system performance anywhere in the head-end or distribution system
Large easy-to-read backlit Graphic LCD display provides quick-glance signal reference even in dimly lit work environments
AC/DC voltage readings and compatibility allow measurements through input connector, enabling signal and voltage measurements when voltage is present in tested signal without costly adapters
8-Hour rechargeable NiMH batteries provide cost savings
Automatic power shut-off feature extends time between recharges
Bright orange high impact plastic housing and soft leatherette-vinyl protective case with belt clip included
S8808 CATV Signal level meter is a measuring instrument especially designed for CATV technician. It is complete digital display with clear and correct reading and the using of microprocessor makes it has high capacity, more accurate and more flexible to operate. Meanwhile it has the character of small size, lightweight, and easy carrying, so it is more suitable to be used outside and fixing TV.
Technical information
(All the technical indexes below are under indoor temperature 25íµ)
Frequency range: 48MHZ-870MHZ
Frequency resolution ratio: 50KHZ
Measured band width: 280KHZ
Level Measurement
Measurement range: 30dBuV-120dBuV
Measurement accuracy: <í+ 1.5dB
Resolution ratio: 0.1dB
Method of detection: Peak detection
Input resistance: 75 ohm
TILT Measurement
Measurement accuracy: +2dB
Voltage Measurement
Input range: 30-80V AC/DC
Measurement accuracy : í+ 2V
Resolution ratio: 0.1 V
Power Supply
DC power supply: DC7.2V/1.5Ah(Built-in rechargeable battery)
AC power supply: AC 220V/50Hzí+10%(9V charger)
(For different countries and areas, the specs may be different)
Working Conditions
Storage temperature: -10--+50íµ
Storage humidity: 40%-80%RH
Recharge the battery once after stored over 6 months
Avoid mechanical vibration and punching.
The product, which newly researched and developed, is the integrative high-tech measuring instrument for the transformation of CATV .The main function is to measure QAM digital signal and analogue signal. The measurable item includes: power measurement , MER measurement , BER measurement , constellation ,channel measurement, tilt measurement, scan measurement, spectrum measurement, carrier noise ratio measurement, and rail voltage measurement. Make the corresponding choice according to the different occasion. The inside process chip adopts the extensive integrated microprocessor which is special to the most advanced tester in the world at present. It has many characteristics such as: the complete function, the fast processing speed, the low static power consumption, small and the high dependability. The peripheral circuit uses its special integrated package design according to corresponding function. The appearance adopts the human mechanics principle, it can be held firmly by single-hand and operated.
Hot Sale Oil Well 2 7/8 Crossover
AddThis Sharing Buttons
Share to FacebookFacebookShare to TwitterTwitterShare to LinkedInLinkedInShare to PinterestPinterestShare to ...AddThis
Hot sale oil well 2 7/8 Crossover
Send InquiryChat Now
Product Details:
Hot sale oil well 2 7/8 Crossover
Brief
This product is one type of couplings. It is used to connect tubing pipes. The placement is male which is easy and flexible to operate. We can do different types and specifications according to the clients requirement.
1.Features: It realized to connect the two different specifications of tubing pipes. The placement is male;well mechanical properties,good sealing and connectivity.
2.Advantages: After hot rolling, we can sure the coupling joint has well-proportioned and consistent metallographic structure. Good sealing and loading capacity.
My factory produces all kind of steel nails and galvanized wire, sincerely hope to establish the business with you.
Our main products are common nails, roofing nails, duplex nails, concrete nails, lost head nails, electric galvanized wire, hot dipped galvanized wire, and black annealed wire. At the same time, because of the good location of our company, we also have many partners with exported products, like wire mesh, steel pipes, and nylon nets, so any products can be exported through our trading office too.
Our company's aim is to provide high quality products with our best service. Any inquiry, please feel free to contact me
1. Material: Alloy Steel, Carbon Steel, Stainless Steel, , Cast Iron, Aluminum, Copper, Brass and so on
2. Heat Treatment: Hardening and Tempering, High Frequency Quenching, Carburizing Quenching and so on.
3. Surface Treatment: Galvanizing/Zinc Plating, chrome plated, Black oxide Treatment, Spray Paint, Mirror Finish, Sand-blasting and so on according to ROHS demand.
4. Inspection: All items are checked and tested thoroughly during every working procedure and after the product is finally manufactured to ensure that the best quality product enter into the market.
1. Welded wire mesh fence for concrete foundations introduction:
Welded wire mesh fence for concrete foundations is also called construction reinforced concrete mesh, concrete reinforcing mesh, welded steel bar mesh, steel concrete mesh.
Welded wire mesh fence for concrete foundations is longitudinal reinforcement and transverse reinforcement were arranged in a certain interval and at right angles to each other, all the intersections are welded together.
2. Welded wire mesh fence for concrete foundations material:
Welded wire mesh fence for concrete foundations is welded form superior low carbon steel wire and then galvanized and pvc coated.It features smooth surface, uniform mesh, high stability and great corrosion resistance.
1-electro galvanized mesh(welded before galvanized, welded after galvanized)
2-hot-dipped galvanized mesh(welded before galvanized, welded after galvanized)
3-pvc coated mesh(wire diameter. Of pvc is about 0.4mm)
Galvanized welded mesh has a good resistance to corrosion. Zinc coating can reach 200g/m2.
3. Steel reinforcing mesh for concrete foundations specifiacation:
Welded wire mesh fence wire diameter: 6-10mm
Welded wire mesh fence width:1m, 1.5m, 2.0m, 2.4m, 3m, or with your requirement
Welded wire mesh fence fence length:1m, 2m, 4m, 6m, 8m, 12m, or with your requirement
Aperture:3/4", 1/2", 1', 1/4', 3/8"or with your requirement.
Certification:iso9001, ce, sgs, bv
Surface treatment: electro galvanized or hot-dipped galvanize.
Well screen, double layer pre-packed screen, all-welded wire-wrapped screen, laster gap-cut screen, water stainer, gas strainer, sieve plate, all kinds of drill tools, pipe base screen, casing, tubing, collar.
