The chisels can be used with air hammer and it is widely applicable and high efficient chiseling holes, cutting, chiseling groove for concrete and brick wall
Webforge gratings are manufactured using a high voltage resistance welder, which is computer controlled. Cross rods (square twisted or round) are set horizontally on evenly spaced flat bars automatically and welded using high electrical current of 1600kva and hydraulic pressure of 1000kn to produce forge-welded grating panels of considerable rigidity and strength capable of supporting high loading
Steel band
Steel brand: q235, q195, q195l, q195ld, 08al, spcc
Thickness: 0.18mm-3.0mm
Width: 0-780mm
Width tolerance: different as per different width
Thickness tolerance: different as per different thickness
Hardness of steel coil: >95hv (softened and hardened we can offer)
Weight: 3-9mt/c (or according to the customerí»s requirement)
Surface: general, bright, dull and mirror finish, oiled or unoiled
Packing: standard exporting packing with edge protector, steel hoop and seals, or as per customer's requirements
Steel band
Steel brand: q235, q195, q195l, q195ld, 08al, spcc
Thickness: 0.18mm-3.0mm
Width: 0-780mm
Width tolerance: different as per different width
Thickness tolerance: different as per different thickness
Hardness of steel coil: >95hv (softened and hardened we can offer)
Weight: 3-9mt/c (or according to the customerí»s requirement)
Surface: general, bright, dull and mirror finish, oiled or unoiled
Packing: standard exporting packing with edge protector, steel hoop and seals, or as per customer's requirements
The steel shot have proper hardness degree and evenly distributed granularity ,it applied in shot blasting surface cleaning of raw iron ,tin ,carbon steel and other extensively!
25kgs in one plastic bag ,40bags in one pallet ,or in compliance with your request
The steel grit produced with special and unique techique has particle-size uniformity ,stable performance ,it classify three series of it :GP GL GH,and the GH type have the higher hardness degree than others.
25kgs in one plastic bag ,40bags in one pallet.or in compliance with your request
Section steel
A. Equal angle and unequal angle, specification: 25x25x3 30x30x3.4 40x40x4 50x50x5 63x63x6 100x63x10 125x80x12 200x125x18
B. I-beam :12-560mm
C. Channel steel:8-450mm
D. Various h-beam
E. Steel billet :120, 150, 200, 300, 400
F. Light rail, heavy rail, floating rail
We can supply steel cut wire shot with sae standard and reasonable rates. Welcome your enquires and comments.
Sc1.0mm sc1.2mm sc1.5mm
Chemical composition
C : 0.45-0.75
Si : 0.10-0.30
Mn : 0.40-1.20
S : < 0.04
P : < 0.04
Hardness( hrc ): 36-52
Intensity of stretching resistance( mpa ): 1660-2200
Metallographical : tempered martensite
Density (g / cm3 ): 7.8
Usage: applied in shot blasting surface cleaning of raw iron, tin, carbon steel and other casting extensively!
Main chemistry: c 0.85-1.20% si 0.40-1.50% mn 0.60-1.20%
Cr 0.09-1.20% mo 0.15-0.25%
Density: 7.4g/ cucm
Size: 0.3mm- 2.5mm we can customize other size product
Hardness:40-50hrc
Package:25kg/bag, 40bags/ton.Also, we do special packing requirement such as iron drum and plastic bags.
Usage: Applied in shot blasting surface cleaning of raw Iron, tin, carbon steel and other casting extensively!
Main chemistry: C 0.85-1.20% Si 0.40-1.50% Mn 0.60-1.20%
Cr 0.09-1.20% Mo 0.15-0.25%
Density: 7.4g/ cucm
Size: 0.3mm- 2.5mm we can customize other size product
Hardness:40-50HRC
Package:25kg/bag, 40bags/ton.Also, we do special packing requirement such as Iron Drum and Plastic bags.
1)Content from 90% to 95%, s: 0.05%
2)Size: According to the customer
3)Packing: 1MT bags or 25kg bags
4)1000-1500MT per month
Graphite electrode scrap:
1)Fixed carbon: 98.5% min s: 0.05% max ash+valatile: 1.5% max
2)Size: As your requirment
3)Packing: In 1MT bags
4)200-500MT per month
