Find Verified Jewellery Boxes Suppliers, Manufacturers and Wholesalers

HYJL-12 High Voltage Metering Cabinet (box)
HYJL-12 high voltage metering cabinet (box) (hereinafter referred to as "floor type metering box "), suitable for AC three-phase AC 50Hz, rated voltage 10kV power system as a high voltage cable into the user's electric energy metering, can be installed in parks, residential communities, industrial and mining areas of the roadside lawn, can directly open the door to see the bottom of the meter and local circuit breaker switching operation.
The floor type measuring box is mainly composed of vacuum circuit breaker, cast type combined CT, lightning arrester, live display and intelligent control device, etc. The measuring mode is three-phase three-phase system and three-phase four-wire system, which can be configured with zero sequence current transformer for grounding protection. The floor type metering box conforms to GB/T 1984-2014 "High voltage AC Circuit breaker", DL/T 402-2016 "High voltage AC Circuit breaker", DL/T 403-2000 "12kV~40.5kV High voltage vacuum circuit breaker ordering technical conditions", GB/T 17201-2007 "Combined transformer" and DL/T 721-2013 "Distribution automation system remote terminal" and other technical standards.
High Voltage Switchgear Cabinet� Normal operating conditions
Altitude: not more than 1000m, if the altitude is higher than 1000m, the rated insulation level should be corrected accordingly;
Ambient temperature: upper limit +45â??, lower limit -40â??, maximum daily temperature difference 25K;
Humidity: average daily relative humidity â?¤95%, average monthly relative humidity â?¤90%;
Solar radiation intensity: 0.1Wcm2;
Wind speed: 34m/ s;
Wind pressure: 700Pa;
Pollution grade: e� level;
Ice thickness: â?¤10mm;
Withstand earthquake resistance: horizontal acceleration 0.3g, vertical acceleration 0.2g.
� Structural characteristics
Small footprint, less investment, cost-effective;
With automatic power supply, data processing, display, storage, alarm and automatic power off functions;
Equipped with anti-theft device, can reduce unnecessary power loss for the power system;
With pre-payment function to avoid users defaulting on electricity bills;
The box is stainless steel floor structure, beautiful appearance and easy installation.
https://www.cntdelectric.com/

Bottom-turning hydraulic box turner machine
The hydraulic box flipping machine mainly consists of a flipping body, a base, a hydraulic cylinder, an oil circuit, an executing cylinder, and a box for the box flipping machine control.
Main functions and advantages
1. The use of hydraulic energy to convert into mechanical energy has the advantages of stable operation, strong environmental adaptability, convenient maintenance, and simple operation.
2. The tilting cylinder body and clamping cylinder hydraulic system are equipped with hydraulic locks, which enable the equipment to stop and start in real-time during operation, avoiding various dangerous situations caused by sudden shutdown due to power failure. After the power failure is restored, the operation can be completed manually.
3. The flipping body adopts a bottom clamping flipping box design, which is safer and more stable.
4. Realizing online box flipping operation greatly saves the time required to lift the sand box off the operating line for box turnover operation without a box turnover machine.
5. The control system is integrated into the operation control cabinet, and for the convenience of equipment operation, the control box can be placed nearby according to the equipment position.
Equipment performance and characteristics
The equipment adopts a double acting single rod piston type oil cylinder placed behind the flipping body, and the columns on both sides are connected to the flipping body through bearings, ensuring better stability during flipping, smoother operation, and more convenient installation.
The sand box operates to the flipping position, and the proximity switch feedback signal is sent to the electric control cabinet. The clamping oil cylinder on the flipping body acts in place, the sand box is clamped, and the pump station outputs oil to the tilting oil cylinder. The flipping body and the sand box are tilted 120° with the base bearing as the center, and the molding sand and casting slide diagonally to the sand receiving part of the sand treatment system, and the casting is produced; After the molding sand is cleaned, the pump station supplies oil in reverse, the flipping body returns to its original position, the clamping oil cylinder is released, and the sand box operates to proceed with the next flipping action.

Both the Hydraulic Mold Box Turning Device and the Bottom Turning Mold Handling Equipment utilize a hydraulic system to rotate sand boxes (mold boxes) in lost foam casting production lines. These devices are ideal for heavy-load mold handling and are integral in the molding and casting preparation stages.
Guoning offers reliable and customizable equipment tailored to your specific production line layout and load requirements. Both systems help reduce manual labor, increase safety, and improve overall production efficiency.

Price of product ( USD price or FOB price) :
USD 24.63

Key Specifications/Special Features :
COLOR: WHITE

Minimum Order Size and Packaging details :
Min.Order Quantity: 10000 Packing : 10pcs/box. Box size: 56.5*85*53CM . # of boxes/carton: 100 BOX Carton size: 520 * 425 * 450 mm. Expiration Date: 2 Years.Storage Conditions: Humidity < 80%, keep indoor, ventilation.

FDA 510K
Basic Info.
Model NO.:YYST Color:Blue
Leading Time: Within 14 Days
CE Certificate:Approved
FDA Certificate: Approved
SGS Report: Available
SGS Cost:Quantity More Than 2 Containers Seller Afford
Chemo Drug Tested: Passed
Trademark: Hongray
Transport Package: 100 PCS Per Box, 10 Boxes Per Carton
Specification: 9"
Origin: China
HS Code: 61161000

Product Description :
3 LAYERS- These quality masks are made of Meltblown cloth and Non woven fabric withich are proven to filter more effectively. COMFORTABLE & ADJUSTABLE - made with soft ear loops and a flexible metal nose bridge for more secure fit.

Price of product ( USD price or FOB price) :
USD 13-14.5

Product origin :
Jiangsu, China

Key Specifications/Special Features :
Regular Mask with High level of quality. Non Medical.

Minimum Order Size and Packaging details :
Min.Order Quantity: 10000 Product Dimension: 17.5 cm * 9.5 cm Packing : 50pcs/box. Box size: 42*46*52CM . # of boxes/carton: 40BOX Carton size: 520 * 425 * 450 mm. Expiration Date: 2 Years.Storage Conditions: Humidity < 80%, keep indoor, ventilation.

Enviroment protection Material

Music lamp cap

Strengthened seat

Five units per box
Packing size
76 * 56 * 40

Support Customize

Price of product ( USD price or FOB price) :
USD 0.3

Minimum Order Size and Packaging details :
MIN ORDER: 1,000,000 PACKING: 100 PCS/BOX CARTON SIZE:33.5*36.5*58CM WEIGHT:8.4KG

Product Description :
3 LAYERS- These quality masks are made of Meltblown cloth and Non woven fabric withich are proven to filter more effectively. The size of masks is specially designed for Kids ages between 6-12 year olds use. COMFORTABLE & ADJUSTABLE - made with soft ear loops and a flexible metal nose bridge for more secure fit.

Price of product ( USD price or FOB price) :
USD 19.5- 20.5

Product origin :
Jiangsu, China

Key Specifications/Special Features :
Regular Mask with High level of quality. Non Medical. Kids Use. Color: BLUE Port of Loading: Airport. Payment Term: China Delivery Time Shipment:

Minimum Order Size and Packaging details :
Min.Order Quantity: 10000 Product Dimension: 17.5 cm * 9.5 cm Packing : 50pcs/box. Box size: 42*46*52CM . # of boxes/carton: 40BOX Carton size: 520 * 425 * 450 mm. Expiration Date: 2 Years.Storage Conditions: Humidity < 80%, keep indoor, ventilation.

Material: hot dip galvanized wire, pvc coated wire

Suface treatment:

1. Electro galv. Gabion box

2.Common hot-dipped galv. Gabion box, zinc coated about 50g/m2

3.Heavy hot-dipped galv. Gabion box, zinc coating complies to astm-a641-1998 & en 10244-2

4.Pvc coated gabion box complies to astm a975& en 10245-2

Features:
* economic. Just fill the stone into the gabions and seal it.
* simple installation. No special technology needed.
* weather proof under natural destroys and corrosion resistant.
* no collapse even under big scope of deforming.
* sludge in the stones is good for plant growing. Mixed to form a integrity with the natural environment.
* good permeation can prevent the damage by hydrostatic.
* less transport freight. It can be folded together for transport and further installation.

Packing:for easy handing and shipping, the gabions are supplied folded flat.A color stripe applied on the side of each folded gabion identifies the size.

Loading:usually, gabions will be loaded into 40ft containers to save cost.



Water proof paper

Fire Resistant: endure high temperature or fire without burning or distortion.
Super strong: 4 times strength than normal stainless cash box. Endure hammering without damage and distortion, ensure banknote¡¯s safety.
Good fatigue resistance: 1.5 times fatigue resistance than stainless steel, long service life.
Light weight: 1/4 weight of same thickness steel, more convenient for handling and transit.
Nonmetallic material successfully avoids electron screening effect, convenient for electronic management.
Series of cash boxes with various sizes and capacity, more convenient for management.

Plastic boxes .

As clients'requirments.

we are supplier of gabion box,contact sales09(at)wire-cn(dot)com,(WhatsApp+8615830118069),wire diameter:2-4mm,60*80,80*100mm,80*120,100*120...
size:2*1*1,1.5*1*1,2*1*0.5,3*2*1.....

2019-nCoV Antigen Rapid Test Kit (Colloidal gold Assay)
Specimen Type: Siliva
Time to result: 15 minutes quick test
Storage: 18 months (room temperature)
Package: 25 Tests/Box ( 25 test cassettes + 25 Antigen extraction tubes + 25 Saliva sampling cups+ 25 Sampling droppers + 1 bottle Antigen extract R1 buffer+ 1 Test tube stand + 1 manual)
Relative Sensitivity: 90.3%.

New products will be launced in next 2 weeks, please mantain your attention!
2019-nCoV Antigen Rapid Test Kit (Colloidal gold Assay)
Specimen Type: Nasopharyngeal Swab
Time to result: 15 minutes quick test
Storage: 18 months (room temperature)
Package: 25 Tests/Box (25 pcs Nasopharyngeal swab + 25 test cassettes + 1 bottle Antigen extraction tube + 1 bottle Antigen extract R1)
Relative Sensitivity: >85%

Short test time: Within 15 Minutes
Accuracy: More than 90%
Easy operation: Throat/Nose swab, Saliva sample.
One-step solution - Lower cost with high efficiency

Components:
A 25 test cassettes
B 25 Antigen extraction tubes
C 1 bottle antigen extract R1
D 1 Test tube stand
E 25pcs Saliva Sample cups
F 25pcs disposable droppers
G 1 manual

Application:
A Suspected case test in epidemic area
B Early test of fever clinic and CDC
C Screening of primary medical institutions
D Inspection of floating population in public areas

Product Information:
Product Name : 2019-nCoV Antigen Rapid Test Kit
Methodology : Colloidal Gold Assay
Size: 25 Tests/box
Storage and Validity: Stored at 2-30 within 18 months
Specimen: Nasopharyngeal Saliva

Read the results in 15 minutes. A strong positive results may show within 15 minute.

But the negative result must be reported after 15 minutes. And the results after 20 minutes are not valid anymore.

Baby Playpen/Children Tent/Children Game Fence

Description:

Inflatable Dimension: 130*115*65
190T Polyester Taffeta Silver Coating, Fiberglass pole
feature: Portable, Eco-Friendly, Stocked
Application: Car, office, Home Use, Outdoor, Gift, Hiking, Cam

Logo Customized
OEM Accept
Production capacity 50,000pcs per month
Delievery detail 15-25 days
Packing details 1pc/opp bag/white box
Payment Term T/T,L/C,Paypal
Delievery Port Hebei, China

Vinyl, Nitrile Glove â??HONGRAY GLOVES - Made in China
1. Products have been exported to Japan, USA, Europe (Spain, Italy, France) India, Dubai...!
2. Fully Certified and Tested: ISO, CFS, CE, FDA 510K, EN 455-3, EN 374-4, EN420, ASTM D6319-19, ASTM D 412-16, ASTM 6124-06, US FDA 21 CFR 177.2600 , Test Japanese Food...
RECEIVE CONTRACT FROM 16,000 - 10,000,000 boxes. (EXW, FOB) very good price
3. Payment : LC at sight.

Major applications of welded gabions:
1. Retaining wall structures
2. Prevention of current scour and erosion control
3. Bridge protection
4. Hydraulic structures, dams and culverts
5. Embankment protection
6. Rockfall prevention and soil erosion protection.

Brand Name HX
Model Number hxb08slw
Material Galvanized Iron Wire
Type Wire Cloth
Application Gabions
Hole Shape Square
Aperture 60x80mm
Material Galvanized Iron Wire
Wire Gauge 2.0-2.8mm
Gabion box

Gabion box is rectangular boxes which are formed from panels of 'triple twisted' mesh which are framed by thicker selvedge wires. End panels and internal diaphragms at 1.0m centres are then wired to the base of the gabion. The triple twist weaving of the wire prevents unraveling.

Gabion boxes applications:
• Control and guide of water or flood
• Flood bank or guiding bank
• Preventing of rock breaking.



Packed in rolls with plastic bag outside.

OPGW Joint Box
OPGW joint boxs, also known as splitter boxes, are designed to accommodate core connectors to the outdoor intermediate fiber optic cable leading to the control room patch panel. Fiber core connectors are used to connect backbone fiber optic cables (such as OPGW)

OPGW Joint Box
The OPGW joint box is used to store the fiber core splices leading to the control room patch panel.The OPGW junction box is a key component in the installation and maintenance of OPGW cables, and is used to place, protect, and organize the splices or splices of the fibers within the OPGW cable.

Huaneng OPGW joint box has the following characteristics.
1. The OPGW joint box supports, organizes and protects the optical fiber.

2. The OPGW joint box ensures that the minimum bending radius of the optical fiber is not exceeded.

3. The fiber joint box has no sharp edges or protrusions that could damage the fiber optic cable.

The OPGW joint box provides entry for all cables Includes numbered labels for tube and fiber identification. The housing is lockable.

As a OPGW splice box professional manufacturer, supplier and exporter, Huaneng can support various sizes of fiber cable joint box, and we can also customize them to your design.

OPGW Joint Box
The OPGW joint box is used to store the fiber core splices leading to the control room patch panel.The OPGW junction box is a key component in the installation and maintenance of OPGW cables, and is used to place, protect, and organize the splices or splices of the fibers within the OPGW cable.

Huaneng OPGW joint box has the following characteristics.
1. The OPGW joint box supports, organizes and protects the optical fiber.

2. The OPGW joint box ensures that the minimum bending radius of the optical fiber is not exceeded.

3. The fiber joint box has no sharp edges or protrusions that could damage the fiber optic cable.

The OPGW joint box provides entry for all cables Includes numbered labels for tube and fiber identification. The housing is lockable.

As a OPGW splice box professional manufacturer, supplier and exporter, Huaneng can support various sizes of fiber cable joint box, and we can also customize them to your design.

OPGW Joint Box
OPGW joint boxes, also known as splitter boxes, are designed to accommodate core connectors to the outdoor intermediate fiber optic cable leading to the control room patch panel. Fiber core connectors are used to connect backbone fiber optic cables (such as OPGW)

OPGW Joint Box
The OPGW joint box is used to store the fiber core splices leading to the control room patch panel. The OPGW junction box is a key component in the installation and maintenance of OPGW cables, and is used to place, protect, and organize the splices or splices of the fibers within the OPGW cable.

Huaneng OPGW joint box has the following characteristics.
1. The OPGW joint box supports, organizes and protects the optical fiber.

2. The OPGW joint box ensures that the minimum bending radius of the optical fiber is not exceeded.

3. The fiber joint box has no sharp edges or protrusions that could damage the fiber optic cable.

The OPGW joint box provides entry for all cables Includes numbered labels for tube and fiber identification. The housing is lockable.

As a OPGW splice box professional manufacturer, supplier and exporter, Huaneng can support various sizes of fiber cable joint box, and we can also customize them to your design.