solar storage lead-acid GEL battery
12V 200AH other size is available .
Maximum discharge current: 100A
Maximum charging current: 50A
Size: 522*240*222mm
Weight: 54KG
key features
*low maintenance
*deep cycle
*high efficiency
*high on technology
* smart storage
* Long lasting
* environment friendly
solar storage lead-acid GEL battery
12V 200AH other size is available .
Maximum discharge current: 100A
Maximum charging current: 50A
Size: 522*240*222mm
Weight: 54KG
key features
*low maintenance
*deep cycle
*high efficiency
*high on technology
* smart storage
* Long lasting
* environment friendly
The exploitation of mineral resources has led to the decrease of non-renewable resources. The rising price of raw materials has greatly impacted the cost market and brought inconvenience to our life. Therefore, the recycling of non-renewable resources is imminent. 60% recyclable and renewable resource is from the recycling resource in the world, it's an important point to resolve these resources.
The eddy current sorting machine is also called a non-ferrous metal sorting machine, an eddy current sorting machine, a copper-aluminum sorting machine, etc. It is mainly used for the recovery of non-ferrous metals( such as copper, aluminium, zinc, etc) from industrial and domestic waste, and the sorting range of non-ferrous metals with a particle size greater than or equal to 2 square millimeters . The sorting rate could reach 99%.
The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use
Product purity: zinc content more than 99.995%
Diameter: 1.0mm-4.0mm
Package:20--5kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel
Material: adopt 0 distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008
Characters:
1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
Transportation storage it is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain.
Applications
The thermal spraying wire is used in a variety of applications, such as:
1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres
2.Coatings to resist heat and prevent scaling of conventional low alloy steels
3.Bond coats for improving the adhesion of top coatings
4.Coatings on moulds in the glass industry
It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use
Product purity: zinc content more than 99.995%
Diameter: 1.0mm-4.0mm
Package:20--5kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel
Material: adopt 0# distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008
Characters:
1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
Transportation storage�?it is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain.
Applications
The thermal spraying wire is used in a variety of applications, such as:
1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres
2.Coatings to resist heat and prevent scaling of conventional low alloy steels
3.Bond coats for improving the adhesion of top coatings
4.Coatings on moulds in the glass industry
It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
zinc wire of size 3.17 mm and size 2.5 mm for the process of metallizing
The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use
Product purity: zinc content more than 99.995%
Diameter: 0.5mm-5.0mm
Package:20--50kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel/drum
Materialdopt 0distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008
Characters:
1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
Transportation storaget is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain.
Applications
The thermal spraying wire is used in a variety of applications, such as:
1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres
2.Coatings to resist heat and prevent scaling of conventional low alloy steels
3.Bond coats for improving the adhesion of top coatings
4.Coatings on moulds in the glass industry
It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
whatsapp+8613722988404 sophiashen#canchunmetal.com
1.5mm drum package zinc wire for high frequency welded pipe
Pure zinc wire
The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use
Product purity: zinc content more than 99.995%
Diameter: 1.0mm-5.0mm (1.4mm , 1.6mm, 2.0mm, 2.5mm, 3.17, 4.76mm..)
Package:20--50kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel
Material: adopt 0 distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008
Characters
1.The size and shape of spray will n
ot be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
Transportation storage ï¼?it is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain.
Applications
The thermal spraying wire is used in a variety of applications, such as:
1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres
2.Coatings to resist heat and prevent scaling of conventional low alloy steels
3.Bond coats for improving the adhesion of top coatings
4.Coatings on moulds in the glass industry
It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
Zinc anode has the characteristics of high purity, bright color, compact structure, no slag and no holes. It has good conductivity, corrosion resistance, uniform dissolution and long service life.
Specification
Size: zinc anodes can be provided in different shapes according to your requirement, such as rectangle, square, bracelet-shape and other abnormal shapes and so on (thickness 10-200mm, length 50-2000mm)
Zinc content :not less 99.995%
Package :wooden case
Application
Sacrificial anode for hull cathodic protection
Sacrificial anode for cathodic protection of ship ballast tank
Sacrificial anode for cathodic protection for port and marine engineering facilities
Sacrificial anode for cathodic protection of sea water cooling water system
Sacrificial anode for cathodic protection of storage tank in storage tank
Sacrificial anode for cathodic protection of buried pipelines
Zinc aluminum cadmium alloy sacrificial anode
Transportation and storage
Wrapped with acid, alkali or salt that may corrode zinc are forbidden. It should be stored in a dry and ventilated storeroom which is free of corrosive substance and be protected from rain.
Razor wire is a new protective wire product with strong protection and isolation ability.
The product has beautiful appearance, good anti-resistance effect, convenient construction, etc.
1.Material : high carbon steel, galvanized steel sheet and wire, stainless steel sheet and wire
2.Surface treatment : Electro galvanized, Hot dipped galvanized, PVC coated.
3.Application:
Used in many high security applications, It is typically found in gardens, hospitals, industrial
and mining enterprises, prisons, border posts, detention centers,
Governments buildings or other security facilities. Also used for division of railways, highways, etc, as well as agricultural fence.
Basic Information
Modular UPS, three phase, online UPS, high frequency, PWM doubleconversion
parallel UPS, N+Xredundancy, hot swap modules
UPS Power:150KVA
Battery: optional battery pack
Back up time:according to load capacity
Overview
CMS UPS units are non-isolated, industrial level, green UPS, adopting advanced modular power protection concept.CMS Modular architecture can scale power as demand grows or as higher levels of availability are required. CMS UPS is industry-leading efficiency, availability, and performance for small, medium, and large data centers and mission critical environments.
Basic Information
Truly Modular UPS
Full UPS functioned UPS Module
Choice of UPS Module (10kVA, 25kVA, 50kVA) result in Rational Redundancy
Modular, hot-swappable, field-replaceable STS, Monitor, UPS module
Scalable from 10kVA to 800kVA. Parallel-capable up to 3200kVA.
Overview
CMS UPS units are non-isolated, industrial level, green UPS, adopting advanced modular power protection concept.CMS Modular architecture can scale power as demand grows or as higher levels of availability are required. CMS UPS is industry-leading efficiency, availability, and performance for small, medium, and large data centers and mission critical environments.
Basic InformationOnline Modular
Modular UPS, three redundancy, hot swap modules
UPS Power:800KVA
Load power: Â 720KW
Battery: optional battery pack
Back up time:Â according to load capacity
Overview
CMS UPS units are non-isolated, industrial level, green UPS, adopting advanced modular power protection concept. CMS Modular architecture can scale power as demand grows or as higher levels of availability are required. CMS UPS is industry-leading efficiency, availability, and performance for small, medium, and large data centers and mission critical environments.
Basic information
Modular ups, three phase, online ups, high frequency, pmw doubleâ conversion
Parallel ups, n+x redundancy, hot swap modules
Ups power: 100kva
Load power: 90kw
Battery: optional battery pack
Back up time:â according to load capacity
Overview
Cms ups units are non-isolated, industrial level, green ups, adopting advanced modular power protection concept. cms modular architecture can scale power as demand grows or as higher levels of availability are required. Cms ups is industry-leading efficiency, availability, and performance for small, medium, and large data centers and
Feature
•rational redundant structure
•ups module: 10 kva, 25 kva, 50 kva; system: 50kva, 100 kva, 150kva, 250 kva, 350 kva, 500 kva, 800 kva.
•great performance index
•overall efficiency â?¥ 95%(ac-ac), inverter efficiency â?¥ 98%(dc-ac), thdi â?¤ 3%, and input pf â?¥ 0.99
•n+x module-level redundancy ups system
•multi-level decentralized control technology and master-slave synchronization in sequency control which result in eliminate system failure bottleneck
•each module automatically even shares the input and output current, all ups modules share batteries
•battery management:
•battery discharge management, auto-transfer between floating and even charging, temperature compensation
•space-saving high density design, rack-based for agility and aesthetics
•monitor function
•c/s-oriented architecture sicon software which is available to monitor multiple ups up to 600 sets;
•b/s-oriented architecture which is available to check via ie
•standard configuration
•manual maintenance bypass, spd(class c), rs232, rs485/rs422 communication ports, remote monitor software, day contacts
•optional configuration
•epo, input/output transformer, battery bank, ipds(intelligent power distribution system)
Application
Modular, hot-swappable, field-replaceable Monitor, UPS module
Embedded modular power protection with ultra high availability and efficiency for Data center
Scalable from 6kva to 36kva. Wire in/out mode: 3/3,3/1,1/3,1/1.
Overview
ERMS series UPS is an embedded modular UPS of low and medium power developed by SCU. With flexible structure, it could be embedded in standard 19 inch cabinet or work independently for de-centralized power supply. ERMS provides integrated power solution. Internal battery module and output PDU are available for optional configuration. It features superb input and output performance indexes. As a product with the smallest size, the highest efficiency and the greatest power density in the industry, it boasts extremely high cost-efficiency.
Feature
Rational redundant structure: UPS module: 6 kVA; System: 12kVA, 24 kVA, 36kVA.
Great performance index: Overall efficiency 95%(AC-AC), inverter efficiency 98%(DC-AC), THDI 3%, input PF 0.99
N+X module-level redundancy UPS System
Multi-level decentralized control technology and Master-slave synchronization in sequency control which result in eliminate system failure bottleneck
Each module automatically even shares the input and output current, all UPS modules share batteries
Battery Management Function: Battery discharge management, auto-transfer between floating and even charging, temperature compensation
Monitor Function: C/S-Oriented Architecture SICON Software which is available to monitor multiple UPS up to 600 sets; B/S-Oriented Architecture which is available to check via IE
Standard configuration: Manual bypass, RS232, RS485, dry contacts, TCP/IP adapter for local and remote communication.
Basic Information
Modular UPS, three phase, online UPS, high frequency, PWM double conversion
parallel UPS, N+X redundancy, hot swap modules
UPS Power:500KVA
Load power: 450KW
Battery: optional battery pack
Back up time: according to load capacity
Overview
CMS UPS units are non-isolated, industrial level, green UPS, adopting advanced modular power protection concept. CMS Modular architecture can scale power as demand grows or as higher levels of availability are required. CMS UPS is industry-leading efficiency, availability, and performance for small, medium, and large data centers and mission critical environments.
More info http://www.sicon-emi.com/data-center-and-facility-ups_p65.html
Feature
Rational redundant structure
UPS module: 50 kVA; System: 500kVA;
Great performance index
Overall efficiency 95%(AC-AC), inverter efficiency 98%(DC-AC), THDI 3%, and input PF 0.99
N+X module-level redundancy UPS System
Multi-level decentralized control technology and Master-slave synchronization in sequency control which result in eliminate system failure bottleneck
Each module automatically even shares the input and output current, all UPS modules share batteries
Battery management system:
Battery discharge management, auto-transfer between floating and even charging, temperature compensation
Space-saving high density design, Rack-based for agility and aesthetics
Monitor Function
C/S-Oriented Architecture SICON Software which is available to monitor multiple UPS up to 600 sets;
B/S-Oriented Architecture which is available to check via IE
Standard configuration
Manual maintenance bypass, SPD(Class C), RS232, RS485/RS422 Communication ports, Remote monitor software, day contacts
Optional configuration
EPO, Input/output Transformer, Battery Bank, IPDS(Intelligent Power Distribution System)
About Sicon
With factory& headquater in China, subsidary in Netnerland and partners in 50 countries worldwide, Sicon is dedicated infour sectors: UPS, uniterruptible power supply, data center facility, EV charge infrasturecure and ESS energy storage. Over 100pcs innovation patent of these products have been made by Sicon engineers. Technical leading and future driven, Sicon is able to make your business profitable.
Thermal spraying with zinc wire was 99.99%, when the atmospheric conditions is not in serious corrosion (such as dry weather), can reduce the the purity to 99.95%.Zinc has good plasticity, can draw wire material, used for wire arc spraying and flame spraying.When in the flame spraying, purity of zinc in the process of spraying generally will not change.
1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents.
2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature.
3.The thick of coating can be changed in large range from several microns to several millimeters.
4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products.
The surface of the zinc wire smooth and bright, broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use.
Applications
The thermal spraying zinc wire is used in a variety of applications, such as:
1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres
2.Coatings to resist heat and prevent scaling of conventional low alloy steels
3.Bond coats for improving the adhesion of top coatings
4.Coatings on moulds in the glass industry
It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
1274 Electronics Communications Suppliers
Short on time? Let Electronics Communications sellers contact you.
