Find Verified Electric Kettle Suppliers, Manufacturers and Wholesalers

Galvanizing Tank/Galvanizing Kettle/Zinc Kettle
Zinc Kettle / Galvanized Kettle for Hot-Dip Galvanizing Plants
Ainc kettle (also called a galvanizing kettle, galvanizing tank, or molten zinc bath) is the core vessel of hot dip galvanizing equipment. It holds molten zinc at 438-460 C (820-860 F), into which cleaned steel parts are submerged to form a durable zinc-iron alloy coating.
The kettle must withstand continuous thermal stress, the corrosive attack of liquid zinc on steel, and the mechanical load of heavy workpieces â?? making material selection and welding quality the two most critical factors in kettle longevity.
Hebei Annuo manufactures three main kettle types to suit different galvanizing processes:
Batch galvanizing kettles for structural steel, fabrications, and general-purpose HDG plants
Continuous galvanizing kettles for wire, strip, and tube lines
Spin galvanizing kettles for small fasteners, nuts, bolts, and hardware
Key Features of Our Galvanized Kettle
XG08 Low-Alloy Steel - The Best Kettle Material in China
The material we use is XG08, which is the best steel sheet for manufacturing galvanizing kettles in China. It contains tightly controlled levels of:
Carbon (C): - 0.08%
Silicon (Si): - 0.10%
Sulphur (S): - 0.008%
Phosphorus (P): - 0.010%
Lower Si and C content directly reduces the Fe-Zn reaction rate at the kettle wall, cutting wear by up to 40% compared with standard structural steel. Standard structural steels typically contain 0.20-0.35% Si, which can increase the corrosion rate by 2-4 versus XG08.
One-Piece Hydraulic Forming No Horizontal Bottom Weld
The U-shaped kettle body is hydraulically formed in a single press operation, eliminating horizontal weld seams at the high-stress bottom zone. Horizontal welds are the most common failure point in galvanizing kettles; removing them is the single most effective measure for extending service life.
100% Ultrasonic Testing at Two Stages
Every steel plate is ultrasonically scanned before cutting. Every completed weld seam is 100% UT-tested after fabrication. No kettle leaves the factory without passing full weld integrity verification.

Front fork type:Spring fork (low gear without damping)
Brake type:Rear wheel disc brake
Frame structure:Folding bike

Material of the gantry frame: 12# National Standard Steel Frame Structure
brake mode : Oil brake
Lift height : 3M(can be customized)
Product load capacity : 2500kgs

Standard configuration
12V4.5 battery *1, 380 motor *2
High-end configuration
12V7 battery *1, 380 motor *2
LED cool lights, multi-functional Bluetooth player

Standard configuration:
12V 4.5Ah battery * 1, 380 motor * 2
High configuration:
12V 7Ah battery * 1, 380 motor * 2
LED cool light, multi-functional Bluetooth player

1: Single drive 6v4 battery, with music, light and early education functions.
2: Dual drive 6v7 battery, with music, light and early education functions, Bluetooth connects to the USB port of the mobile phone.
3: Dual drive remote control, with music, light and early education functions, Bluetooth connects to the USB port of the mobile phone.

Feature:
Standard configuration:
Classic retro children's electric motorcycle
Safety material/slow start setting/triangular structure/smoother speed/
Enlarged seat/comfortable backrest/simulated headlight
Early childhood education music can be connected to Bluetooth

Suitable Age: Above 12 years old
Size: 117*37*68cm
motor power: 24V250W
battery capacity: 12V12AH
carrying capacity:80kgs/176lbs
charging time: 3-6 hours
maximum speed: 25KM/H
Tyre: 3.00-4 inch
Colour: Red, White,Grey, Blue

Pakcage:
Net Weight: 23.5kgs/51.7lbs
Gross Weight: 27kgs/57.2lbs
Carton Size: 110*37*68cm(1pc/1ctn)
Full Container: 161pc/20, 330pcs/40,390pcs/40HQ

Style: Folding
Frame Material: High-Carbon Steel
Max Speed: 25kg/h
Wheel Size: 14 inch
Brake Mode: Front and rear brake disc
Weight: 35000kg

Allocation Class: Multifunctional
Is it foldable? No
Frame Material: High carbon Steel
Load capacity: 50kg-100kg
Wheel Size: 14 inch
Brake Mode: Front drum, Back Cymbal

Frame Material: High-Carbon Steel
Weight of Electric Bicycles: 25kg-50kg
Brake Mode: Front and Rear hub type
Wheel Size: 14 inch
Suitable For the croud: Adult

Size:
Length: 143 cm
Width: 24 cm
Height: 106 cm
Volume: 363792 cm3

Custom Your Brand Design e-Scooter
Import Electric Scooters From China

- Custom Body of Scooter Color (White/Yellow/Green .... ect.)
- Wire Plug & Brake Line & Wheel Rim Colors can be changed.
- Electric Pedal Scooter/Customize Design Luminous Pedal
- Add Front / Rear Suspension (Shock Absorber)
- Add Saddlebag or Others
- Printing Logo on tube/Pedal...

Frame material : Aluminum alloy
Battery type : Lithium battery
Braking mode : Front and rear disc brakes

What is Dimethyl sulfoxide?

Dimethyl sulfoxide (DMSO) is an organosulfur compound with the formula (CH3 )2SO.
It is an important polar aprotic solvent that dissolves both polar and nonpolar compounds and is miscible in a wide range of organic solvents as well as water. It has a relatively high boiling point.

DMSO is widely used in chlorofluoroaniline, acrylic and aromatics extraction, and externally applied agent, inositol nicotinate,antioxidant 1010, synthesis of berberine, esterification accelerator, waterborne paint antifreeze, capacitor, paint remover,trifluoronitrobenzene, sucrose esters of stearic acid, polyvinyl chloride fiber, paraffin refining, alpine region automobile antifreeze, kettle cleaning agent, and pesticide synergist, etc

Reddish metal (face-centered cubic); very ductile. It is a good conductor of heat and electricity (next to silver).
Widely used in powder metallurgy, electrical carbon products, diamond tool products, electronic materials, conductive materials, chemical catalysts, pharmaceutical chemicals, filters, radiating tubes and other mechanical and electrical parts and electronic aviation field.
Product name
Copper powder
CAS No
7440-50-8
Size
8~12um
Sublimation
500 degree
Shape
Powder
MW
63.55
Specific gravity
3.597 g/mL at 25 �°C
Applications
1. Used as a raw material for smelting and electrolyzing copper;

2. Used in powder metallurgy parts, diamond saw blades, friction materials, electrical carbon products and chemical catalyst;

3. It is mainly used to make conductive devices and alloys (bronze, brass, white copper, etc.);

4. Mainly used as raw material for copper smelting industry.

5. Reagent, alloy, electroplating.

Hot Dip Galvanizing Furnace Manufacturer Engineered for Your Production Line
Annuo designs and manufactures hot dip galvanizing furnaces for plants of all sizes â?? from general batch galvanizing lines to special furnaces for tubes, pipes, and steel structures. Each furnace is engineered around the customer's actual zinc kettle dimensions, production capacity, and available fuel source, rather than built to a fixed template.
We have built more than 30 complete hot dip galvanizing plants for customers in China and abroad. Recent furnace projects include a general galvanizing line in Chongqing engineered for a 6500-2000-3000mm zinc kettle, and a large steel-structure galvanizing line in Jiangsu Province engineered for a 13500-2200-3500mm kettle see more in our� project case studies.

Understanding the Galvanizing Furnace
The galvanizing furnace is the enclosure in which the zinc kettle is heated to maintain molten zinc at the correct working temperature throughout the galvanizing process. A PLC-based temperature management system continuously monitors and regulates heat input to keep the kettle within its target range, preventing the local overheating that shortens kettle service life.
Heating intensity depends on the fuel source natural gas, oil, or electricity selected according to the customer's local fuel availability and cost. A properly engineered furnace typically has a service life of around 20 years, while the zinc kettle itself (a separate component manufactured from low-carbon, low-silicon steel see our Zinc Kettle page for material specifications) typically lasts 7-9 years before replacement.

Furnace Construction & Features
Three integrated systems: furnace body system, combustion system, and control system
Furnace body structure: welded section steel and steel plates using high-quality carbon steel, with strictly controlled welding deformation to ensure structural stiffness and strength
Internal lining: ceramic refractory fiber composite structure 60mm ceramic refractory fiber layer plus a 300mm ceramic high-alumina refractory fiber folding block, keeping the outer wall temperature low and minimizing heat loss during operation
Combustion system: velocity burning nozzle with dedicated controller for even heat distribution around the kettle, preventing local overheating
Control system:PLC system with instruments, gauges, and a ratio pulse control system for precise, automated temperature management
Modular assembly: ceramic fiber modular construction allows accessible, no-stop inspection and maintenance of burners, ventilation, and regulating valves during production
Fuel flexibility: can be configured for natural gas, oil, or electric heating depending on plant requirements

Antimony trioxide Sb2O3 CAS 1309-64-4
Antimony trioxide mostly used as synesis which with halogen flame retardant in most of polymer materials compounding. It is also can be used as clarifier additive inside glass making. And used for ceramic glaze and pigment & coating. Main application: The product is mainly applied to the industries of plastics, rubber, chemical fiber, paint, enamel, pigments, glass and electronics. Physical and chemical indicators and its characters: the main content is between 98.00-99.90 percent and it also can be produced according to the requirements of customers. And the average particle size can be determined according to the requirements of customers.1. Used as a fire retardant in the membranes of plastic industry, the enclosures of electric devices and household electric

DOTP has good electrical and thermal resistance. It can replace DOP in PVC plastic electric wire sheath, and can also be used in the production of artificial leather film. In addition, it has excellent compatibility and can also be used for plasticization of acry lonitril derivatives, polyvinyl butyral, nitrile rubber, nitr cellulose, and the like.And it plays a role in improving the hardness and deformability of the product, and can be used as a softener in products such as nitrile rubber, neoprene rubber, EPDM rubber and the like. It is especially used in cable materials with good plasticizing effect and low volatility. It is widely used in various products requiring heat resistance and high insulation. It is an ideal plasticizing for producing temperature-resistant 70C cable materials and other volatile PVC products Agent.

This product is one of the few kinds of antioxidant, which is non-toxic, tasteless, light colored. Widely apply in each kind of elastomer. It can be used in polyethylene, polypropylene, polyvinyl chloride and other plastic masterbatch. It may use as the urethane foam as well as the electric wire, the electric cable, packaging material for food, the adhesive antioxidant, especially for heat-resisting , lightfastness, ageing resistance in the neoprene colored cable sheath, antioxidant KY-445 is are remarkable. It can use as lightfastness and ageing resistance antioxidant in the polyether and foam, and also as lubricant antioxidant. It's specially effective to protect neoprene, polyacrylate rubber, polyether polyol and so on from ageing resistance because of high fever, light and some other factors. It has good cooperative effect with the sulf-antioxidant.

1. Product name: Cobalt powder
2. Purity: 99.9%min
3. Particle size: 50nm, 5-10um, 325mesh, etc
4. Cas No: 7440-48-4
5. Appearance: gray black powder




Characteristic.
Cobalt powder is gray and irregular, soluble in acid, magnetic, easy to oxidize in wet air. It is widely used in aviation,
aerospace, electrical, mechanical manufacturing, chemical and ceramic industries. Cobalt based alloys or cobalt containing alloy steels are used as high temperature heat-resistant parts and important metal materials in atomic energy industry as blades, impeller, conduit, jet engine, rocket engine, missile component and chemical equipment of turbine.

As a binder in powder metallurgy, cobalt can ensure the toughness of the hard alloy. Magnetic alloys are indispensable materials in modern electronics and mechanical and electrical industries, which are used to make various components of sound, light, electricity and magnetic materials. Cobalt is also an important part of permanent magnetic alloys. In chemical industry, cobalt isused in high alloy and anticorrosive alloy, and also used in colored glass, pigment, enamel, catalyst and desiccant.
Application
-Water atomized cobalt powder has a relatively coarse grain size, which can be used in welding materials to improve its toughness, impact resistance and wear resistance.
-Reduced cobalt powder is in fine size and high purity, can be widely used in diamond tools, powder metallurgy,