OPGW Joint Box
OPGW joint boxes, also known as splitter boxes, are designed to accommodate core connectors to the outdoor intermediate fiber optic cable leading to the control room patch panel. Fiber core connectors are used to connect backbone fiber optic cables (such as OPGW)
OPGW Joint Box
The OPGW joint box is used to store the fiber core splices leading to the control room patch panel. The OPGW junction box is a key component in the installation and maintenance of OPGW cables, and is used to place, protect, and organize the splices or splices of the fibers within the OPGW cable.
Huaneng OPGW joint box has the following characteristics.
1. The OPGW joint box supports, organizes and protects the optical fiber.
2. The OPGW joint box ensures that the minimum bending radius of the optical fiber is not exceeded.
3. The fiber joint box has no sharp edges or protrusions that could damage the fiber optic cable.
The OPGW joint box provides entry for all cables Includes numbered labels for tube and fiber identification. The housing is lockable.
As a OPGW splice box professional manufacturer, supplier and exporter, Huaneng can support various sizes of fiber cable joint box, and we can also customize them to your design.
Preformed Guy Grip , Preformed Guy Grip Dead End, Dead End Guy Wire Grips, Preformed Dead End Guy Grip, Dead End Grips
About Preformed Guy Grip
A preformed guy grip is also named preformed guy grip dead end, which is a set of twisted wires used to create a connection to an eye thimble for added stability to telecommunication or cable. The recognized and reliable preformed guy grip dead end for the connection is also responsible to grip the conductor, ground the wire, and application for optical fiber.
Application: The dead end guy grip is made of the same material as the strands they apply to, and is used to pull wire rods in the construction of power and communication lines.
Installation: After the initial installation, the dead end guy grip can be removed and reapplied twice to re-tension the cable. If a dead angle needs to be removed after three months of installation, a new dead angle should be replaced.
a professional new technology enterprise that develops, manufacture preformed guy grip deadend for adss, preformed guy grip with dead end clamp, preformed dead end guy grips. We have a large production base and a professional and independent foreign trade company to provide customers with high-quality services
High frequency generator
1.Introduction:
High frequency generator named radio frequency generator also. It is the core part of high frequency machinery. Different frequency- 6.78mhz, 13.56mhz, and 27.12mhz can be widely used for woodworking (plywood bending, glue curing, timber drying), grain worm killing, freezing meat melting, and environment protection field.
High frequency generator generates electromagnetic fields between two electrodes through three phase alternating current. In this field, water and glue molecules are polarized - rotated - heated by friction. high frequency heating is not like conductive heating, which heat material step by step, but help object heated themselves by friction. This is called high frequency dielectric heating-quickly, efficiently and evenly. Besides, there are more advantages in high frequency heating:
1). Easy to control: once cut off power, no heating anymore; once power on, heating works wholly.
2). Low heating loss, energy saving.
3).Environment friendly: high frequency is clean power, dust free.
4).Hf power can kill worm and bacteria in the material like timber and grain.
2.Parameter:
Model, hf20-6-ii-ch, hf30-6-ii-ch
Power supply, ac 380 v, 50hz, 3 phase four wire
Input power, 30kva, 45kva
Output power, 20kw, 30kw
Frequency, 6.78mhz/ 13.56mhz/27.12mhz
Radio tube, fu834 fa, fu924 fa
Commutate type, three phase full wave silicon commutate
Cooling type, forced air cooled
Tuning type, variable capacitance
Protection, overload protection, wind pressure protection, door switch protection, filament warm up protection
Output type, one/two outputs, one/two outputs
Overall size, l1100xw900xh1900mm, l1100xw950xh1950mm
Total weight, 700kg, 800kg
High frequency generator
1.Introduction:
High frequency generator named radio frequency generator also. It is the core part of high frequency machinery. Different frequency- 6.78mhz, 13.56mhz, and 27.12mhz can be widely used for woodworking (plywood bending, glue curing, timber drying), grain worm killing, freezing meat melting, and environment protection field.,
High frequency generator generates electromagnetic fields between two electrodes through three phase alternating current. In this field, water and glue molecules are polarized -, rotated -, heated by friction., , high frequency heating is not like conductive heating, which heat material step by step, but help object heated themselves by friction. This is called high frequency dielectric heating-quickly, efficiently and evenly. Besides, there are more advantages in high frequency heating:
2.Features:
1). Easy to control: once cut off power, no heating anymore; once power on, heating works wholly.
2). Low heating loss, energy saving.
3).Environment friendly: high frequency is clean power, dust free.
4).Hf power can kill worm and bacteria in the material like timber and grain.
3.Parameter:
Model, hf20-6-ii-ch, hf30-6-ii-ch
Power supply, ac 380 v, 50hz, 3, phase four wire
Input power, 30kva, 45kva
Output power, 20kw, 30kw
Frequency, 6.78mhz/ 13.56mhz/27.12mhz
Radio tube, fu834 fa, fu924 fa
Commutate type, three phase full wave silicon commutate
Cooling type, forced air cooled
Tuning type, variable capacitance
Protection, overload protection, wind pressure protection, door switch protection, filament warm up protection
Output type, one/two outputs, one/two outputs
Overall size, l1100xw900xh1900mm, l1100xw950xh1950mm
Total weight, 700kg, 800kg
FP40-400.12 Fan Pump Exchange Unit / FP40-400.12 Rotor Unit is 100% interchangeable with original Andritz FP40-400.12 Fan Pump, Th FP40-400.12 Exchange Unit made from duplex stainless steel 1.4460.
FP Series Fan Pump is a low pulse and high efficient paper pulp pump, It is new standards in terms of efficiency, flexibility, and design. This double-suction pump series was designed for flow rates up to 20,000 mh and heads up to 220 m. The pumps can convey stock suspensions with consistencies of up to 2%. The fan pump supplied has a very high efficiency of 92% and lowest pulsation in order to guarantee perfect sheet formation.
High efficiency and low pulsation
Water
With efficiencies of over 90%, FP40-400.12 Double Suction Split Case Pumps permanently help to save valuable energy.
ADSS (All-Dielectric Self-Supporting) tension clamp is a device used to attach and support ADSS cables to poles or towers in overhead fiber optic cable installations. It is designed to grip the cable without damaging it while also providing the necessary tension to keep the cable taut and secure. The clamp is typically made of corrosion-resistant materials such as aluminum or plastic and is available in different sizes to fit various cable diameters.
ADSS Tension Clamp
Composition: twisted wire, thimble, PH-type shackle, U-type shackle etc.
Purposes: support all strain, make ADSS cable connect the strain pole and tower.
Features:
Preformed wire connect the pole and tower by thimbles etc. link fitting, afford the load of the transmission line.
Grip strength not less than cable 95%RTS in case that not more than lateral pressure of the cable
E xcellent aluminum clad steel improve the mechanical and resist-corrosion function, extend life.
Corrosion-resistant materials such as aluminum or plastic to ensure durability and longevity.
Gripping mechanism that securely holds the cable without causing damage.
Tensioning mechanism that allows for adjustment of the cable tension.
Insulating material to protect the cable from electrical currents.
PTB Electricity Meters
Acrel DJSF1352-RN DC energy meter, is a PTB(Eichrecht) approved DC energy meter with dual DC input is mainly designed for telecom base station, DC charging pile, solar photovoltaic and other applications. This series of meters can measure voltage, current, power and positive and negative energy in the DC system. In the actual use of the site, it can measure the total energy, and can measure the energy within the specified time period. Detection results can be used for local display, and can be connected with industrial control equipment, computer, measurement and control system.
Features
Measurement: kWh, kVarh, Power, Current, Voltage and etc
Current Rating: -/75mV (with Shunt); -/4~20mA (with Hall Sensor)
Voltage Rating: 0~1000V DC
Application: DC Battery; Charging Pile; Solar PV and etc
Communication: RS485 (MODBUS-RTU)
Extra Function: Dual DC Circuits Monitoring; Secondary RS485 (MODBUS-RTU); Built-in Bipolar Power Source (for Hall Sensors); DO/DI Function
Display: LCD Display
Dimension: 72*71*87.8mm (L*W*H)
Installation: 35mm DIN Rail
Power Supply: 85~265V AC/DC; 24V(±10%) DC; 48V(±10%) DC
CE Smart Energy Meter
Energy meters play a vital role in energy control and management, providing key information for improving energy efficiency. Energy meters support electricity trading and billing processes for end users and businesses. With energy meters, energy consumption monitoring and optimization can be achieved. Acrel power meters can reduce energy consumption through predictive maintenance, identification of underperforming equipment, calculation of return on investment, and many other measurements.
Widely used in various control systems, SCADA systems, and energy management systems, designed for the power monitoring needs of power systems, industrial and mining enterprises, public facilities, and smart buildings. It has complete communication and networking functions.
Smart, Accurate, and Reliable Energy Monitoring for Modern Facilities
Acrel introduces the CE Smart Energy Meter, engineered to deliver precise energy measurement and intelligent monitoring for commercial and industrial applications. Designed to meet international standards, our smart meters provide actionable insights into energy consumption, enabling businesses to improve energy efficiency and reduce operational costs.
Key Features
Smart Energy Monitoring: Real-time tracking of voltage, current, frequency, active and reactive power, and power factor across single-phase and three-phase systems.
Advanced Power Quality Analysis: Detects and analyzes 2nd to 31st harmonics, ensuring stable power quality and preventing equipment failures.
Seamless Communication: RS485 interface with MODBUS-RTU protocol ensures smooth integration with building management and energy monitoring systems.
High Accuracy: Designed with a rated voltage of 220~264Vac L-N and rated current of 50mA AC (via -/50mA CTs) for reliable and precise readings.
Acrel DJSF1352-RN DC energy meter with dual DC input is mainly designed for telecom base station, DC charging pile, solar photovoltaic and other applications. This series of meters can measure voltage, current, power and positive and negative energy in the DC system.
Features
UL Listed
Measurement: kWh, kVarh, Power, Current, Voltage and etc
Current Rating: -/75mV (with Shunt); -/4~20mA (with Hall Sensor)
Voltage Rating: 0~1000V DC
Application: DC Battery; Charging Pile; Solar PV and etc
Communication: RS485 (MODBUS-RTU)
Extra Function: Dual DC Circuits Monitoring; Secondary RS485 (MODBUS-RTU); Built-in Bipolar Power Source (for Hall Sensors); DO/DI Function
Display: LCD Display
Dimension: 72*71*87.8mm (L*W*H)
Installation: 35mm DIN Rail
Power Supply: 85~265V AC/DC; 24V(±10%) DC; 48V(±10%) DC
Acrel ADL400 single phase energy meter is mainly used to measure single phase active energy of low-voltage network, and can measure voltage, current, power and other electricity at the same time, and can be equipped with RS485 communication function, which is convenient for users to monitor, collect and manage electricity consumption.
MID Energy Meter
Acrel ADL400 MID Energy Meter is mainly used to measure single phase active energy of low-voltage network, and can measure voltage, current, power and other electricity at the same time, and can be equipped with RS485 communication function, which is convenient for users to monitor, collect and manage electricity consumption.
MID
MID refers to the "Measuring Instruments Directive," specifically "Directive 2004/22/EC of the European Parliament and of the Council dated 31 March 2004 on measuring instruments." Its purpose is to establish a unified European market for measuring devices through standardized approval processes.
Overview
SA2100 is a handheld multi-functional device which is designed to measure and analyze single or three-phase power system. This portable class S device can provide safe, convenient and accurate measurements for troubleshooting power networks.
SA2100 Portable Power Quality Meters
Portable Power Quality Meters enable electricians and facility maintenance professionals to troubleshoot and benchmark power quality problems over time. They help you identify energy waste in your facility and detect and prevent power problems before they occur.
Why do you need Power quality meter analyzer?
Portable Power Quality Meter identifies power quality problems that often manifest themselves as dips, spikes, harmonic distortion, imbalances, flicker and transients.
Power quality determines the suitability of electrical energy to drive motors, machines and other end-user equipment.
Poor power quality can affect the ability of these devices to operate properly, which can lead to malfunctions, premature failures or possibly cause them to not work at all.
Most power quality analyzers monitor total harmonic distortion, phase angle, power factor, balance, etc. to get a complete picture of the system.
IoT Power Meter
A IoT power meter is a data-transmitting meter that helps industries monitor and manage three-phase power consumption. It transmits real-time energy consumption data to a server in the cloud, allowing for better management of energy consumption and industrial equipment.
Acrel ADW300 energy meter is mainly used to measure three-phase active electric energy of low-voltage network, with RS485 communication and 470MHz wireless communication function, which is convenient for users to monitor, collect and manage electricity consumption.
Smart Energy Meter IoT
With Internet of Things (IoT) enabled solutions for smart metering, you can improve customer service and increase profitability with actionable smart meter data insights.
Internet of Things Smart Meters
Traditionally part of the grid infrastructure, smart meters are electronic devices that can remotely monitor and record energy consumption. However, in the era of IoT and IoT platforms, standalone smart meters are giving way to more advanced and versatile smart metering solutions. These solutions offer a wider range of remote monitoring and alerting capabilities, as well as powerful data analytics tools to help companies and individual users optimize their energy, water, gas or fuel consumption.
Smart Metering Solutions with Acrel IoT Cloud Platform
Through the wireless network, you can check the status of IoT devices located across the country anytime, anywhere, and simply view data such as energy consumption and alarm reports.
Energy Analysis and Reporting
This page displays daily, monthly, and yearly energy graphs, while energy reports can be automatically generated in Excel format for export.
Parameter Monitoring
Monitor all parameters collected by IOT devices, can generate historical curves, and alarm based on parameter monitoring.
Alarm report
When a potential threat such as over-current, over-voltage or over-temperature occurs, it will be added to the alarm report and notify the user for current alarm.
Alarm Handling
Once the alarm occurs, the most important thing is to deal with the possible faults at the site in time, by sending the alarm processing to the site, in order to solve the problem in time.
Mission Magnum Centrifugal Mud Pump Spare Parts Housing, Outboard Bearing 20624-01-01 (Processing# 644308504) and it can be used for Mission pump model from
The Mission MAGNUM I has been engineered for the toughest jobs in drilling, production, well-servicing, and industrial applications.
The revolutionary design of the MAGNUM I provides supreme-duty performance in all types of fluid pumping operations. Although it offers greater capacity and higher heads, the MAGNUM I remains the competitive pump of choice for aggressive applications.
The MAGNUM I is more powerful, more durable, and easier to maintain than any conventional pump in use today.
The Magnum has an open impeller design that contains wide-tipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids. The Magnum is available in Magnachrome, hard iron, stainless steel, and aluminum bronze fluid ends. The pumps can be unitized with electric motors, diesel engines, and hydraulic motors (horizontal, vertical, or close-coupled configuration).
Also available, Horizontal and Vertical Close Coupled Magnum.
Soffers a complete line of centrifugal sand pumps to suit for all kinds of drilling sand pump application. Size ranges from 3x2x13, 4x3x13, 5x4x14, 6x5x11,6x5x14, 8x6x11,8x6x14, 10x8x14, 12x10x23 to 14x12x22b. Bare pumps, matching motors are available from 7.5KW to 90KW, with rotation 800, 1000, 1150,1450, 1750 to 3500 RPM at 50Hz or 60Hz.
Specification
Material : polyurethane coated wire rope
Aperture shape :square or rectangular
Aperture range : 2mm to big
Wire rope diameter range : 1.5mm to big
Description
Tufflex is polyurethane coated stainless steel wire rope screen with the same open area as woven wire and huge advantages over traditional screens.
The Tufflex screen is made up of two types of ropes welded together. The rope running from hook to hook is a wire rope with a thick polyurethane covering.
This rope, with the wire, allows the hooked edge screen to be tensioned like other hooked edge screens, with no modifications to machinery required.
The same maintenance procedures of checking the screen tension applies to Tufflex screens. The other rope is made up of a fine synthetic cord, also with thick polyurethane covering, and runs parallel to the hooked edge. For side-tensioned set-ups, this rope acts like rider bars for larger stones to slide down the deck, channelling smaller ones closer to the apertures. This increased stratification improves screening efficiency. With the end-tensioned screens, this rope can be used on top,
running in a cross-flow orientation, or positioned underneath the rope with the wire.
Features
Tufflex is a polyurethane-coated screen media that can be substituted for traditional woven wire screens with minimal adjustment to the screen deck.
Available in several combinations of both rope and wire diameter and aperture size, Tufflex offers additional customisation options via partially or fully welded screen cloths.
The smooth surface of the polyurethane prevents sticking and blinding, which is further enhanced by the flexibility offered by Tufflex s cloth construction.
The Tufflex cloths not only improved the quality but also minimised blinding, improved efficiency and have great wear. this provides the site with longer
periods between changeover and less downtime during busy screening periods.
The available range of Tufflex screens is extensive, with aperture sizes ranging from 1.5mm to 45mm and square and rectangular aperture shapes,
similar to woven wire. The wire rope diameter ranges from 1.5mm to 12mm, with custom-made rectangular slots as fine as 0.7mm wide.
The construction varies with either fully or partially welded wires.Sheets of poly can also be welded on for impact protection or enhanced abrasion
protection along the hooks.
