The paper faced gypsum board production line is the professional equipment for producing the new decorated material. The principal working process are as follows: first, we take certain amount of hemihydrate gypsum powder, water and other additives, through the automatic measurement device and automatic conveying system, they will be conveyed into the mixer and changed into the gypsum slurry which will be scattered on continuous moving faced paper evenly. Second, at the same time, with the continuous moving and vibrating, the slurry will gradually diffuse and even scattered. Then the slurry will go into the forming machine and compound with the top and bottom faced paper. By the process of extruding and forming, the slurry will be encased by the faced paper and the continuous pulpous gypsum boards are formed. Third, In the forming line, the wet solid paper faced gypsum board will be gradually formed after the process of recondition, natural coagulating, automatic cutting, etc. The wet board will be arranged according to the programmed control system. With the help of rollers, belt conveyer and overturner, they will quickly enter into the dryer. Fourth, the board will be strictly controlled in the separate temperature zone of the dryer. After blowing into different thermal hot air, the moisture of the wet board will be evaporated. Because of the reaction of the starch, the board will be attached to the faced paper, and then the dry gypsum board will form and exit from the dryer. Moreover, after passing though overtuner and the folding device (the front side is inside) for the second time, the board will be cut into certain specification by saw. Finally, the finished gypsum board will be conveyed to the automatic sealing device and the stacker. After the stacking, the board will be transported to the finished products warehouse by the forklift.
1. PVC film lamination machine
Usage and Characteristics
The lamination machine is used to paste the decorative film and boards together. First, put the board on the rollers. After the dust collection process, coat the glue on the boards, the glue will be qualitatived after conveying on the guide rollers. Then it will be combined with the film and enters into the recombination mechanism. After passing and cyclic rolling of the two lines of press roller, pinch roller and forming roller, the recombination is finished.
The machine is fit for the surface decorative materials, such as pasted and compound decorative film and decorative paper, etc of the PVC baseboard, profile, low foaming board and wood board, etc.
Specification:
Max lamination width: 1300mm
Max lamination speed:2-15m/min
The thickness of the laminated board: 2-50mm
Transmit power: 4.50kw
Power: 380V,50HZ(can be made according to the inquiry)
Size: 12600*1950*1600.
2. aluminum film lamination machine
Usage and Characteristics
The lamination machine is used to paste the decorative film and boards together. First, put the board on the rollers. After the dust collection process, coat the glue on the boards, the glue will be qualitatived after conveying on the guide rollers. Then it will be combined with the film and enters into the recombination mechanism. After passing and cyclic rolling of the two lines of press roller, pinch roller and forming roller, the recombination is finished.
The machine is fit for the surface decorative materials, such as pasted and compound decorative film and decorative paper, etc of the PVC baseboard, profile, low foaming board and wood board, etc.
Specification:
Max lamination width: 1300mm
Max lamination speed:2-15m/min
The thickness of the laminated board: 2-50mm
Transmit power: 4.50kw
Power: 380V,50HZ(can be made according to the inquiry)
Size: 12600*1950*1600.
Gypsum powder equipment is composed of elevating system, dust collecting system, conveyor system, heat supply system, milling system etc.. And the heat supply system is the key link of the whole gypsum powder production line.
The gypsum produced by our company has the following characteristics:
1.The equipment has small volume but large yield.
2.The equipment with easy structure can not be damaged easily.
3.The compact equipment covers less area.
4.It has comparative less energy consumption.
5.It can be conveniently operated and easily controlled.
6.The products are of good quality and gypsum of Paris is of ideal components and stable physical properties.
7.The capital construction investment is small and operating expense is low.
Fragmentizer large gypsum ore broken into less than 25mm of small particles through storage and transport into the mill for grinding, grinding, after an analysis machine to achieve the required fineness of the gypsum product starch into boiling furnace to calcine, the rest of the mill for further grinding until the return pass. Calcined gypsum powder sent to guessed eligible deposit or into storage products workshop .
1405 Builders Hardware Construction Material Equipment Suppliers
Short on time? Let Builders Hardware Construction Material Equipment sellers contact you.
Paper gypsum board production line is the equipment which produces new building materials--paper gypsum board.Its production process is:ripe gypsum, water and all kind of ingredients that automatically precision measurement, by the continuous, automatic transmission system into the mixture into a homegeneous slurry spred to the continuous movement forward in the gypsum board surface of the paper, in advance process, after shock, the slurry was complete encapsulation of paper from top to bottom.And squeezed into the very rules slab, the slab continuous production line in the strict control of the speed and speed and stability to continue to move forward gradually formed a certain itensity, and shape the rules of wet gypsum board, the cut precision control system set by the precise cut into veneer.Veneer orderd by the control system topology, turning it over into the dryer.The drying temperature is strictly controlled, the board absorbed water lost to evaporation.Plate from the dryer, and advance the process of gradually cooling down the production line.After turns hostile every two stiff surface to fold once more gathers, saws after the reason the board both sides shuts off the regular size, transmits to the automatic hay stacker, piles up the end product waregousing.This prouduction line mainly by three major part is composed, namely.Material room, heating system, integral unit.
Working power-----three phare ac 380v 50-60hz
Welding mains-----dc 290-330v
Rated power-------8kva
Max power ------12kva
Welding electricity-----1000-2000a(secondary side).
Specification:
-material: 45constructional carbon steel
-color: white
-package:carton and wooden pallet
-with high tensile strength and good quality.
Technical date:
.The material of the splicing coupler is carbon constructional quality steel of no.45.
.The coupler can link the rebar which diameter from 16mm to 40mm
.The tensile strength of the coupler can be more than 570 mpa
.This kind of connection is more rapid and simple convenient
The characteristics of the usage
1.Standard model65306;
Used in the occasion for connecting the steel bar in normal situation
2.Different diameter model65306;
Used for connecting the steel bar in different diameter
3.Flared model65306;
Sed for the steel bar which was hard to match
4.Positive and negative screw thread model65306;
Used in the occasion when the steel bar in the two sides both can not be turned but the lengths can be adjusted.
5.Locking nut model：
Used when the steel bar can nut be turned, then it truns the splicing coupler to join the steel bar and then lock the splicing coupler with the locking nut.
The effect of air flow and vibration friction on the material is utilized in the machine. Heavy impurities such as stone, etc. in the grain are removed through adjusting the amplitude and inclination angle. It has the characteristics of easy movement, adjustable vibration amplitude.
Batch Type EPS Pre-expander
PRODUCT DESCRIPTION
Batch type EPS Pre-expander
Features:
1.Resin Hopper Capacity for different capacities
2.Fluid Bed Dryer with heater
3.Transfer blower for bead
4.Resin filling blower
5.Pefect sealing and chamber pressure stabilizing ,highly efficient heat transition, energy saving up to 50% comparing to continual type EPS pre-expander.
In the EPS production, sometimes we¡¡¡ê¡èll leave some wasted EPS. By EPS recycling system, the recycled EPS, material can be reused in shape moulding production in a ratio of at least 10-20 percent without any perceptibly optical or physical change of the product quality. For block moulding 20-50 percent or more can be added.
If the production capacity is not very big, we can use mini EPS recycling system as solution.
In the recycling process, we usually use EPS mixer, EPS de-duster and EPS crusher.
This is Jack from China and we are the professional manufacturer of Scaffold Netting & Sheeting more than 10 years, hope can build long business with your company.
Below is our some sizes quotation for reference.
1.
PE scaffold netting(without flame retardant)
Material: HDPE(100% virgin material)
Weight: 60gsm
Color: White
Size: 3m x 50m
Quantity: 1200 rolls with one 40HQ
Price: 18USD/ROLL FOB Qingdao
2.
Fireproof PE scaffold netting
Material: HDPE and flame retardant
Weight: 60gsm
Color: White
Size: 3m x 50m
Quantity: 1200 rolls with one 40HQ
Price: 20.8USD/ROLL FOB Qingdao
3
PE scaffold Sheeting(without flame retardant)
Material: HDPE and flame retardant
Weight: 250gsm
Color: White color with blue tape
Size: 2m x 50m
Quantity: 480rolls with one 20GP
Price: 60USD/ROLL FOB Qingdao
4.
Fireproof PE scaffold Sheeting
Material: HDPE and flame retardant
Weight: 250gsm
Color: White color with blue tape
Size: 2m x 50m
Quantity: 480 rolls with one 20GP
Price: 66.3USD/ROLL FOB Qingdao
Scaffold Sheeting (Leno Tarpaulin)
Scaffold sheeting is a laminated polypropylene material with reinforced webbing bands with the pre-punched eyelet holes in 4 in. intervals.
It serves as a climate shield to ensure a stable working climate on the scaffold so work can be continued in virtually all weather conditions, protecting your personnel from rain, sleet and wind chill.
Scaffold Sheeting additionally protects workers as well as pedestrians from debris falling from the work site.
Purpose:
· Enhance the security for the workers on the scaffold
· Serve as a climate shield to protects workers, machinery and open constructions against weather rain, wind, snow etc.
· Ensure a stable working climate on the scaffold so deadlines can be respected regardless of the weather
· Protect the surroundings from any inconveniences ex. particles or building dust from sandblasting or water jetting from facade works.
Scaffold Sheeting (Leno Tarpaulin)
Scaffold sheeting is a laminated polypropylene material with reinforced webbing bands with the pre-punched eyelet holes in 4 in. intervals.
It serves as a climate shield to ensure a stable working climate on the scaffold so work can be continued in virtually all weather conditions, protecting your personnel from rain, sleet and wind chill.
Scaffold Sheeting additionally protects workers as well as pedestrians from debris falling from the work site.
Purpose:
· Enhance the security for the workers on the scaffold
· Serve as a climate shield to protects workers, machinery and open constructions against weather rain, wind, snow etc.
· Ensure a stable working climate on the scaffold so deadlines can be respected regardless of the weather
· Protect the surroundings from any inconveniences ex. particles or building dust from sandblasting or water jetting from facade works.
Product Description
Product: Date Palm Mesh Bags With UV Protect
Material: PE
Size: 70*90cm 80*100cm or by requirements
Weight: 40g/pc 60g/pc or as requirements
Color: Yellow, red, green or as customer requirements
Sealing & Handle: Drawstring
Type: Tubular date bag
MOQ: 100000PCS
Payment: T/T L/C
Supply Ability: 300tons/month
Package & Shipment
2000pcs/ bag or as customer requirement
Shipped within 30 days since the date of payment
Application
Mesh bags are widely used for onion, potato, apple, orange, cabbage, eggplant, firewood, timber and so on.
Product Description
Product: PP Mesh bags for fruits and vegetables
Material: PP
Size: 30*60cm 50*80cm 52*70cm 40*65cm 28*42cm
Weight: 11g/pc 12g/pc 13g/pc 14g/pc or as requirements
Color: Red, white, green, purple or as requirements
Sealing & Handle: Drawstring
Type: Tubular or L-sewing
Payment: T/T L/C
MOQ: 2000kgs
Supply Ability: 300 tons/month
Package & Shipment
2000pcs/bag or as requirements
Shipped within 30 days since the date of payment
Application
Mesh bags are widely used for onion, potato, apple, orange, cabbage, eggplant, firewood, timber and so on.
Product Description
Material: PE+UV
Shade Rate: 30%~95%
Color: beige, green, red, blue or others
Size: 3*3*3m, 5*5*5m, 4*4*4m, 3*4m, 4*5m
Weight: 160~180g/sq.m
MOQ: 2tons
Using life: 3~5 years
Payment: T/T L/C
Package & Shipment
One piece into one handbag with one label
Shipped within 30 days since the date of payment
Application
Shade sails are widely used in outdoor living areas. Such as swimming pools, car port, sand pits, childrenâ??s play areas and so on. They can prevent the suns harmful rays. And also can be used as a temporary screening method for privacy.
Product Description
Material: 100% new HDPE
Color: White/Green or others
Weight: 300~400gsm
Mesh: 18*18cm 20*20cm
Size: 2*60m
Using life: 3~5 years
Payment: T/T L/C
Package & Shipment
One plastic bag with one label
Shipped within 30 days since the date of payment
Application
Plant Support Net is a solid versatile plastic mesh, designed to provide both vertical and horizontal support to climbing plants or vegetables and horizontal support to long-stemmed flowers. Used vertically, it can support crops like beans and peas till the crops are at their heaviest and ready for harvesting.
1405 Builders Hardware Construction Material Equipment Suppliers
Short on time? Let Builders Hardware Construction Material Equipment sellers contact you.
