Find Verified Tools Instruments Suppliers, Manufacturers and Wholesalers

Features:
Vehicle models from the E65 on,it is the first time for BMW to use fibre-optic cables as the standard for communication between control units.
The optical buses are notable for their high data transmission rate and they are not susceptible to electromagnetic interference. The optical buses in question are the MOST bus, primarily used for in-car entertainment electronics, and the byteflight bus, which serves predominantly safety-critical functions.
OPPS has been designed for encoding, individualising and programming ( CIP) via the Software Service Station (SSS) and envisaged for use as part of the BMW diagnosis Information system (DIS) from DISPlus and Group Test One (GT1). It is intended for testing and programming tasks from the E65 series, taking the place of the diagnostic head.
OPS is intended for rapid programming of control units.
When operated at the SSS, no diagnostic or technical measuring pro-cedures are possible, as no measuring technology is incorporated; in this instance, OPPS / OPS is used predominantly for programming control units (flashing). Communication with the vehicle can be performed both via the MOST and via the OBD interface. The OBD interface is required for the power supply to the OPPS / OPS and has communication properties via which the vehicle can be identified and the data to be programmed can be determined. From CIP version 7.0, it is possible to delete fault code memories via OPPS / OPS.



(1)OPS Orange multiplexer head,
(2)16 pin OBD-II cable,
(3)LAN cable ,
(4)Most Cable(Fiber Cable),
(5)DIS Software V43,49,51 with 80G HDD for IBM T30 laptop
(6)SSS Software V22 with 80G HDD for IBM T30 laptop

Features:
Tacho pro 2007 is the version October,2007. It include full list 46pcs cables and adaptors.

Car Support

Fully support European, American and Asian vehicle types, most of which can be adjusted via OBD-II diagnostic plug.
BENZ A/C/CL/CLK/E/G/M/SL/SLK class (before 2000) New E/C class adopt CAN cable technology, cluster-socket operation (no need to adjust EIS/EZS)
Most of BMW 3/5/7/8/X/Z class vehicles, include operation on EWS, LCM can be adjusted via OBD-II diagnostic plug.
All VW/AUDI vehicles, include A6L A8L Q7
A part of OPEL, SKODA, SEAT
Some American vehicles
Other Euro-American vehicle types: Peugeot, Renault, Volvo, Citroen, Alfa, Porsche.
Characteristic
The Digi-consult is the complete available programming device for digital speedometers.
Programming techniques

Diagnosis-plug:
Programming without removing the cluster

Cluster-plug:
Programming without opening the cluster

EPROM:
Programming the eeprom by clip

Soldering contacts:
Programming by soldering contacts on the circuit board

Processor:
Processor direct programming



Tacho pro V2007 Odometer Correction Kits

Features:
Please notice that our X431 can be updated by internet. X431 auto scan tool is a new generation of product. It's a perfect marriage between automotive electronic technology and information networking. X431 adopts open diagnostic technology, which is the most advanced in the world as well as the future of automotive diagnosis. It carries PDA functions apart from reading trouble code, data stream and actuation test, sensor waveform and digital code control.

Product character:
To interface with computer with X431-PCLINK (optional) to store test data in vehicle service record;
To simulate and test sensors with the help of sensorbox (optional);
To test the parameters of the battery and conduct analysis on battery conditions through batterybox (optional);
To print out test data any time with built-in printer;
Easy operation through handwriting input on large touch screen;
As generic diagnostic equipment, it can interface with diagnostic adaptors of all vehicles models in the world;
Strong test capacity to cover all electronic systems;
Unique reading of date stream to ensure fast date updating;
Strong waveform display to monitor any change in the data stream;
Embedded operation system and open-platform diagnosis to make effective diagnosis possible;
Integrated adaptors featuring compact design and reliability;
Complete after-sales service system to give life-long service;
Multi-language choices and easy update by the Internet.

Reference:
Operation System: Linux
CPU: 32-bit processor
CF card: 128M
Interface: Standard serial/ parallel port
Power: DC12V
Output: Approx. 9W
Printer: Mini thermo printer
Printer interface: Standard parallel port
Screen: 240*320 LCD touch screen with backlight
Structure: main units, Smartbox and mini printer

Features:

Star2000 is the professional diagnostic equipment for Mercedes Benz cars manufactured after year 2000,it is the replacement of HHT. Star2000 operates based on the Windows XP system,it includes workshop information system(WIS system),the movement management system(STARUTILITIES)and the Diagnosis Assistant System(the DAS system).
It is also called Benz Compact3 Star when it is with RS485-RS232cable.



(1)Benz Star Multiplexer(originally OEM)
(2)16 pin OBD II cable (originally OEM)
(3)4 pin cable(originally OEM)
(4)38 PIN cable (originally OEM)
(5)14 PIN TRUCK cable (originally OEM)
(6)RS232cable(originally OEM)
(7)DAS Software with 80G HDD.
(Software Version: DAS January,2008, WISnet January,2008, EPC January,2008ú¼Star finder January,2008)

Customers need one IBM brand laptop to match the harddisk with latest software.

Software Features:

With full-feature OEM-based software, experience the difference with the AUTOBOSS Star Scanner.Comprehensive diagnosis & reading of control modules. Successful diagnostics means proper detection of all ECMs. With dealer-level capability and the widest vehicle range, the AUTOBOSS Star will put your team in the driverí»s seat and your business on the road to success.

Fault Codes
Now you can bring down the service costs associated with fault codes. Easily read & clear vehicle specific information ¿C manufacturer specific codes, factory codes, and generic fault codes on a particular electrical circuit. Our Recommendation: Doní»t forget to print it out in real time.

Quick Test & Quick Delete (select software)
Provides a birdí»s-eye view of all control modules in the vehicle system. The Quick Test feature allows you to quickly scan all systems in the vehicle, identify controllers with faults and provides immediate access to those systems without having to navigate through multiple menus. Our Recommendation: Doní»t forget to print it out in real time.

Live Data
The basics of electronic diagnostics begin with fault codes & live data. Experience high-speed response rate of 8-10 frames per second w/ real-time troubleshooting of up to 4 graphs. Diagnose signals for rich or lean conditions with live data retrieval and viewing of modules in digital and analog format. Our Recommendation: Doní»t forget to print it out in real time.

Component & System level actuations
Perform verification tests to validate the functionality of a particular electrical circuit. This function will bypass time-consuming labor to check the workmanship of electronic components such as switches, sensors, relays, & actuators. Use the
Star Auto Scanner to actuate control modules and see what needs replacement without removing panels and testing without the usage of a multimeter. (e.g. cylinder power balance test, EVAP system leak, EGR valve, solenoids, power windows, windshield wiper activation, etc.)

Service Resets & Initialization
When components are replaced within a module (e.g. injectors, switches, mass air flow sensor, cooling temp sensor, etc.), a vehicle will run very rough. Initialization immediately re-adapts all the values, so the components will be recognized by the vehicle system. (e.g. To reset the service indicator for the vehicle such as í¦oil serviceí¦, í¦service reminder lightí¦, í¦steering angle sensor*í¦, etc.)

Vehicle Adjustments
Ability to adjust performance parameters. (e.g. idle RPM, idle speed adjustment, ignition timing, vehicle w/ immobilizer, set fuel synchronization, throttle-body relearn, DME Alignment, etc.)

Limited Coding & Programming.
Read & change coding has now become highly important for any new retrofit control unit in the vehicle. Contact an AUTOBOSS Dealer for more information.

It is original Star Auto Scanner

Jako scan is a diagnostic scanner which works on japanese (toyota, honda, nissan and
Mitsubishi) and korean (hyundai and kia) made vehicles.

If you lost or don't know car Login Code you must contact dealer and order it -this
can take up to 1 months. Now you can learn the keys with our tools. This cable can
support VAG TACHO SOFTWARE version 1.7 now.

Alldata dvd, the leading computer-based diagnostic, repair and estimating information system, can help you boost shop performance and build customer
Loyalty as you efficiently repair more makes and reduce comebacks.

AD-1 is the latest developed integrated auto diagnostic scanner applied advanced Internet technology, operation based on PC. It is easy to download and upgrade the software via internet. Easy and friendly to user.

Characters:
1. The Auto Scanner operated on the basis of Windows XP system.
2. Changing data stream into waveform to provide dynamic information
3. Printing out the diagnostic result and waveform
4. Providing guidance in the service of vehicles
5. Storing DTC in the diagnosis
6. Storing data stream information without time limit
7. Retrieving data stream and dynamic waveform for playback
8.Updating automaticaly at any time when connected with PC
9.Setting up communication port and baud rate automatically
10.Upgrading online by internet automatically
11. Milti-languages for your preference

Coverage:
European cars: BENZ, BMW, AUDI, LANDROVER, PORSCHE, VOLVO, OPEL, RENAULT, CITROEN, PEUGEOT, FIAT; Malay cars: Proton, Perodua; Japanese cars: HONDA, MAZDA, MITSUBISHI, NISSAN, SUBARU, TOYOTA; Korean cars: DAEWOO, KIA, HYUNDAI; American cars: FORD, CHRYSLER, GM; OBDII:EOBD, OBDII , OBD-CAN; And Chinese cars more than 60 brands included such as: ZHONGHUA, CHERY, SHAUDI, CHEVROLET and etc.

Parameters:
Operation System: Any kinds Windows XP
Power: DC12V
Output: Approx. 9W


Accessories:
Interface, Diagnostic Connector of kinds Cars, Cables and USB line, storage case!

box

Vinyl cutter

We product s series servo vinyl cutter and c series step vinyl cutter
All the machine can contour cutting and batch cutting
C series stepper vinyl cutter
C12, c24, c30, c48 the the pruducts has high precision, using steel axes, which can prevent slipping while cutting long materials.
Using high speed arithmetic microprocessor, stable processing, have low noise and no zigzag while cutting .
Have ultra pressure, capable of punching thick engneering materials, the cutting force and working speed can be adjusted while cutting .
Using high resolution lcd back ligh dispalay.

Application: widely applied in print, plastic, chemistry, ceramic, leather, craft, advertising, textile, costume, dyeing, knitting and bag industries.

Features:

1. Simple, convenient and easy-use.

2. Portable and handhold design; Light weight (360kg); Available to connect with a printer; Norm power supply and Battery power supply all available.

Fireplace tool

Ip phone



45.6*44.2*36.2cm/carton quantity. 10pcs

IP ata

1 upgrade your dect phone/regular phone to a pstn/voip dual mode phone.
2 the standby mode is on pstn channel (necessary for emergency calls such as 911)
3 call hold
4 fsk caller id
5 auto reply
6 one fxs port, one pstn port for pass-thru l
7 power indicator & voip indicator
8 seamlessly integrated with x-tapi lite/pro and beyondtel's sip softphone

Item md-cr0568

Product category usb all-in-one card reader
Product model md-cr0568
Product detail all-in-one card reader/writer
Usb2.0 transfer rate and backward supports with usb1.1
No external power required
Led working indicator
All-in-one design, 1 memory card slot support 8 digital memory cards
Fully plug & play
Low power consumtion
Winme/2000/xp and mac os without usb device driver
Supports win9x with usb device driver
Dimension: 87*24*15mm


Package terms:
Blister

Geometric characteristic data of rasching rings:
Size(mm) d*h*±smm specific area(m2/m3) void volume(m3/m3)
6 6*6*2 789 0.73
10 10*10*2 460 0.7
15 15*15*2 350 0.7
25 25*25*2.5 235 0.78



Packing in plastic bag or iron barral or carbon box

CWDM Equipment

Technical index
1.Max capability:4 channels(10g) , 8channels(20g), 18channels (180g, full wave fiber)
2. Range of wave length: fully compatible with itu-i g.695 standard
3. Operation access type: pdh, atm, stm-16/stm-4/stm-1, oc-48/oc-12/oc-32, ethernet 10/100baset, ge, ficon/escon/fiber channel
4. Fiber optic port transmission type:155mbit/s, 622mbit/s, 1.25gbit/s, 2.5gbit/s;
5. Fiber type:g.652, g.653, g.655
6. Transmission distance:30km, 50km, 80km optional
Optical line index
1. Center wavelength:1470nm, 1490nm, 1510nm, 1530nm, 1550nm, 1570nm, 1590nm, 1610nm
2. Space of wavelength:20nm
3. Light through bandwidth:+- 6 nm
4. Center wave of transmit temperature excursion:0.08nm-0.1nm
5. Transmission power of each wave:-5dbm~+3dbm
6. Receiving power of each wave: -22dbm~-3dbm
7. Receiving sensitivity:<-24dbm
8. Connector: line port fc, user's end: sc
9. User's end wavelength:single-mode:1200nm~1610nm, multi-mode:850nm
10. Fiber optical patch cord: g.652 g.653 g.655 single-mode
Dimension
Standard 19" chassis, 1 u height
Power supply
1. Ac power supply: 220vac +-15% 50hz
2.Dc power supply:-24vdc with +16v~+32v;-48vdc with -36v~72v
3.Power consumption:< 18w
Working environment
1.Operating temperature: -30 ~ +70 degree
2. Storage temperature: -40 ~+85 degree
3.Environment humidity: 5-90%(non-condensing)
4.Atmospheric pressure: 86-106kpa

Usb edge card
Edge modem interface innovation :pcmcia rs232
Usb express

202 & 2003 dodge billet grill insert 1/2 ton ( billet grille 2pcs)