Pipe fittings are the general names of parts and components that play the role of connection, control, direction change, diversion, sealing and support in the pipeline system. Steel fittings are pressure fittings. According to the different processing technology, it is divided into four categories, namely, butt welding pipe fittings (divided into weld and no weld), socket welding and threaded pipe fittings, flange pipe fittings.
According to the application:
1. pipe fittings for connecting pipes are: flanges, live joints, pipe hoops, clamps, clamps, throat hoops, etc.
2. changing the direction of the pipe: bends, bends.
3. pipe fittings changing pipe diameter: variable diameter (different diameter pipe), different diameter elbow, branch pipe table, reinforcing pipe.
4. pipe fittings with additional piping branches: three links, four links.
5. pipe fittings for pipe sealing: gasket, raw material belt, thread, flange blind plate, pipe plug, blind plate, head, welding plug.
6. pipe fittings for pipe fixing: clasp, hook, ring, bracket, bracket, pipe clamp, etc.
According to the connection :1, welded pipe fittings 2, threaded pipe fittings 3, clamping pipe fittings 4, clamping pipe fittings 5, socket pipe fittings 6, rubber ring connection pipe fittings
According to the material divided into 1, cast steel pipe fittings 2, forged steel pipe fittings 3, alloy pipe fittings 4, stainless steel pipe fittings.
Pipe fittings are widely used in municipal, petrochemical, west-to-east gas transmission, ships and nuclear power.
1. Material: Stainless Steel, copper, Al, etc
2. Thickness: 0.02mm~1.5mm
3. Technique: chemical etching, high precision etching
4. Environmental and economical
5. Low tooling cost
6. Surface treatment: good flatness, no scratches, no burr, no broken point, no plugging holes, etc
FEATURE OF PRODUCT Fully meet all kinds of lead-free soldering process requirements; WindowsXP operating system, Chinese and English interface, easy to learn; Standard air furnace, patented hot air system, using hot air convection conduction is more efficient, thermal compensation is faster; PLC+PID closed-loop control, stable and reliable performance, high temperature control and curve repeatability; Dual temperature sensor, dual safety control mode, abnormal speed alarm, off-board alarm; Fully modular design for faster maintenance and reduced maintenance time and cost; The rail is dael with hardened process to make it more stability.
The conveyor chain adpoted with single Pin-plate design.
15% Heat transferring efficiency wasimproved to deal with more complicated and larger products.
Board width: 30-400MM
Tin furnace capacity: 200KG
Normal power / total power: 2-5KW/10KW
Starting power: 7KW
Machine size: 3050*1160*1360
net weight: 400KG
Transport motor: 3Ph 380V 60W
Transportation speed: 200MM-1800MM/Min
PCB transportation method: From left to right
power supply: 3Ph 380V 50HZ
PRODUCT PERFORMANCE
1, Chinese and English man-machine interface, can be switched at any time
2, Full touch screen plus PLC control, all parameters are set, saved and recalled in the touch screen
3, With two temperature measurement interfaces, the tem-
perature curve can be tested with the temperature measure-
ment line.
4, Brand controling system like Mitsubishi, SchneiderOmron etc will warrant the stability of the machine
5, CE certificated
6, Entrance of machine, It can connect with inserting con veyor directly
7, Stainless steel long shaft pin chain conveyor, never abra-
sion
8, Stepper motor for sprayer driving, sider/rail for sprayer guiding Sprayer moving speed can be setin touch screen.
9, Moving speed will not be influent by air pressure.
10, Compare with air cylinder driving, it's moving quietly, stably, less maintenance, longer lifetime.
11, Any parts contact with solder they are made of Ti(not plated TI, not cast iron pot). Just like solder pot impeller, wave tunnel, wave nozzle, bolts and nuts etc.
So to grantee the lead free solder's pureness and kep the pot no eroded.
12, Cavesr apeathat at eftef mexdire
Welding chiller is a special industrial process chiller for cooling welder machine or welding process. TopChiller is a leading welding chiller manufacturer with 20 years experience.
A welding machine is very important for modern industry including: resistance welder,spot welding, projection welding, seam welding, butt welding and flash welding.
Water cooling plays an important role in the welding process and the welder machine. As we all know, there is boring heat during the welding process.
If we dont remove the heat timely, it will cause harm to both the welding machine and the welder.
Welding chillers can take away the excess heat from the welding machine and welding guns during welding processing to keep it safe and in good working conditions.
TopChiller offers a complete line of industrial chillers available for welding machines and welders including resistance welding machine, spot welding machine, and a laser welding machine.
The welding chiller with a cooling capacity range from 1 to 40 tons, 3KW to 180KW and temperature stability of +/-0.5 to +/-2.
Each welder water chiller is self-contained, closed-loop or open-loop depending on the project requirements, with pumping and piping system.
All welding chillers designed and manufactured by TopChiller features non-ferrous water circuit construction consisting of a stainless steel water pump, stainless steel evaporator, energy efficient and reliable scroll compressor, R407c ozone friendly refrigerant charged before delivery.
As a leader of welding chiller supplier, TopChiller is willing to provide all technical support for your welder and welding machine.
TopChiller is a professional welding chiller manufacturer, TopChiller has exported many welding chillers to the Philippines, Australia, New Zealand, Malaysia, Singapore, Indonesia, Chile, Mexico, Costa Rica, Brazil, Argentina, Colombia, South Africa, Nigeria, Saudi Arabia, Dubai, Spain, Italy, etc.
If you are looking for a reliable welding chiller supplier in the market, TopChiller is your best choice.
Just contact TopChiller sales, and tell all the chiller requirements to get a free quotation for your welding machines.
774 Reinforcement Mesh Suppliers
Short on time? Let Reinforcement Mesh sellers contact you.
1. Bjd805 is designed for wire cable processing, max cutting cable 95mm2, this machine is suitable for bv, bvr cable cutting stripping used in power station, electric meter box and automobile industry, car charging column and etc.
2. Advantages: dual motors send the wires simultaneously makes the feeding wire stabler, more accurate size.
3. Adopts plc programming, automatic computer mouse operation, 7 inch touch screen, simple, easy to operate.
Technical parameters
Mode
Automotive wire stripping machine bj-d805
Function
Wire cut, both-ends strip
Cutting wire core
Dia 18mm (100mm2 below)
Production capacity
400-1000 pcs/hour (decided by wire type)
Cutting length
1mm-9999mm
Stripping length
Strip front 0-50mm, strip tail 0-50mm
Accuracy of inlet outlet motor
Mute hybrid stepping motor 0.1mm per step
Remark function
Auto-outlet, auto-inlet, timing start
Driving mode
8 wheels
Dimension
755x550x510mm
Net weight
121kg
Blade material
Import highspeed steel
Product Feature:
The machine adopts hybrid driven microcomputer LCD screen control system, in the processing
range can be arbitrarily set the length of the cutting line, stripping length, has quantitative and
timing start function. Specialized for thick wire or cable , especially for BV, BVR cable wire
processing used in the automotive, power distribution box.
4 Wheels: Machine Working Video
6 Wheels: Machine Working Video
8 Wheels: Machine Working Video
Technical Parameters
Mode
BJ-900
BJ-960
BJ-980
Function
Wire Cut, Both-ends Strip, Intermediate Strip
Wire Cut, Both-ends Strip
Cutting wire core
0.1-25 mm2
(BV 16mm2, BVR 35mm2)
0.1-50 mm2
(BV 16mm2, BVR 35mm2)
0.1-50 mm2
(BV 25mm2, BVR 50mm2)
Production Capacity
1000-4000 wires/hour(decided by wire type)
Cutting Length
0.1mm-99999.9mm
Intermediate strip no.
13 strips
Stripping Length
Strip front 0.1-50mm Strip rear 0.1-30mm
Strip front 0.1-250mm Strip rear 0.1-120mm
Strip front 0.1-250mm Strip rear 0.1-120mm
Accuracy of inlet outlet motor
Mute Hybrid Stepping Motor 0.1mm per step
Remark Function
Auto-outlet, Auto-inlet, Timing start
Driving Mode
4 wheels
6 wheels
8 wheels
Dimension
420X297x345MM
530X420x370MM
570X420x400MM
Net weight
35KG
35KG
45KG
Blade material
Import tungsten steel/Highspeed steel
Product feature:
The machine using the hybrid drive microcomputer lcd display control system, cutting, stripping and both-ends splitting in red white flat ribbon cable, blue white flat ribbon cable, gray flat ribbon cable, double flat ribbon cable can be finalized in one time, computer control both-ends splitting length, does not require the replacement of mold, operation is simple and easy to understand.
Machine working video
Technical parameters
Mode
Bj-900+t
Function
Flat ribbon cable cutting, both-ends stripping and splitting, intermediate stripping
Applicable wire range
2 pins-12pins
Processing speed
2000-4000 pieces per hour (decide by wire material)
Cutting length
0.1mm-99999.9mm
Intermediate stripping nos.
13 strips
Stripping length
Stripping wire head: 0.1-25mm stripping wire tail:0.1-20mm
Accuracy of entry & outlet wire motor
Mute hybrid stepping motor 0.1mm per step
Remark function
Auto-entry wire, auto-outlet wire, timing start
Driving mode
Six wheels driven
Dimension
510x340x340mm
Net weight
40kg
Cutter material
Import tungsten steel/highspeed steel
Automatic wire cut strip cable bending machine
It can strip bend cut full automatically
Product feature:
The machine uses a hybrid drive microcomputer full lcd control system, specialized for the cutting, stripping,
Dual direction 30 degrees to 90 degrees bending of wire harness used in automobile, power plant, power
Distribution box, battery box and other industries.
Features:
Mainly used for processing coaxial cable and special single wire, using the most advanced rotating turret, to improve the accuracy and speed.
Use of specific tools and rotary axis positioning device, and can strip up to 9 layers without changing the blade corresponds to the processing of various sizes and sheath wire, and is equipped with freely set controller modular, digital display cutting diameter.
Machine Working Video
Device Name: 4806 Coaxial Cable Stripping Machine
Technical parameters:
Max cable diameter: 0.81-up to6.99 mm
Cutting Unit Depth: 0.01mm
Stripping Length: 48mm
Stripping layers: 9
Drive mode: motor / ball screw drive (imported from Japan)
Display: Touchscreen
Blade: 2, Material: tungsten steel imports Switzerland
Centering sheet: 2, Material: tungsten steel imports
Clamp means: self-aligning, motor drive, the clamping force control program
Productivity: 500-700pcs / h (depending on the cable type and length dependent)
Open: Manual / Sensor
Power: 220V / 50HZ
Power: 250W
Net Weight: 25KG
Dimensions: 525X186X278 mm
Working environment: 0-50 degrees, moderate dryness, vibration-free work surface, moderate dryness workshop
Model no.: dm8500
Wire cutting capacity: 50mm ~ 9999mm
Processing diameter: 3.0-8.0mm
Cutting depth unit: 0.01mm
Processing efficiency: 400-700pcs per hour (depended by wire )
Maximum capacity of sheath stripping: left rear: 45mm / right rear: 100mm
Shortest sheath stripping length: 35mm
Dimensions: 560x690x400mm
Weight: 102kg
Power: ac220v 50 60hz power: 500w
Features:
1. This machine is suitable for processing multi-core power cord and special single-core wire;
2. Wire cutting, stripping jacket, stripping core wire and other complex work order can be completed on the machine, to maximize the saving labor costs and improve processing quality;
3. The mobile blade holder, cutting, stripping were used different tools to complete, cut neatly, stable stripping quality;
4. Up to 100 groups of storage capacity, so that a variety of data processing intact, retrieved at any time!
Economical alternative is pneumatic jacket multicore wire stripping machine
This machine uses a hybrid drive microcomputer full lcd operating system, cutting, stripping, one time completion, but also the front half stripping with twisted wire, protect the integrity of the wire, special wire can instantly change the size of wire specifications.
Machine working video
Machine working video for super short wire
Model no.
Bj-600
Bj-650
Bj-800
Bj-880
Main function
Cut wire, both-ends stripping
Cut wire, both-ends stripping, intermediate strip, (wire twisting for bj-880)
Cutting wire core
0.1-4.0mm2 (30awg-14awg)
0.1-4.0mm2 (30awg-14awg)x2
0.1-2.0mm2 (32awg-14awg)x2
0.1-2.5mm2 (30awg-14awg)x2
Processing speed(decided by wire material)
2000-8000 pcs/hour
4000-16000 pcs/hour
2000-8000 pcs/hour
Cutting length
0.1-9999.9mm
No. Of intermediate stripping
0
13
Stripping length
Strip head:1-30mm
Strip tail:0.1-15mm
Strip head:1-30mm
Strip tail:0.1-30mm
Strip head:1-50mm
Strip tail:0.1-30mm
Strip head:1-30mm
Strip tail:0.1-20mm
Accuracy of outlet inlet motor
Mute hybrid stepping motor 0.1mm per stepping
Other functions
Automatic wire inlet & outlet, timing
Driving mode
4 wheels
Dimension(mm)
380x250x320
420x297x345
420x297x345
420x297x345
Net weight
25
28
32
35
Blade material
Import tungsten steel/high speed steel
Wire Stripping Machine For Car Charging Column Cable
Product Feature:
1. BJD804 specialized for cable manufacturing and processing, max cutting cable for 150 Sq.mm,
this machine is suitable for BV,BVR cable cutting used in power station, electric meter box and automobile
industry, car charging column and etc.
2. Advantages : adopt 8 groups of synchronize belts to feed the wires simultaneously to make the
feeding more stable and accurate.
3.The machine uses PLC programming, automatic computer mouse operation, 7 inch touch screen,
simple, easy to operate.
Machine Working Video
Technical Parameters
Mode
BJ-D804
Function
Wire cut, both-end strip
Cutting Line Core
Dia 6-23mm (150 Sq.mm below)
Production Capacity
400-1000pcs/hour (decided by wire type)
Cutting Length
1mm-9999mm
Intermediate strip no.
13 sections
Stripping length
Strip front 0.1-150mm strip tail 0.1-50mm
Accuracy of inlet outlet motor
Mute hybrid stepping motor 0.1mm per step
Remark Function
Auto-inlet, auto-outlet, timing start
Driving Mode
8 wheels
Dimension
775X560X520MM
Net Weight
150KG
Blade Material
Import Highspeed Steel
Feature:
Is suitable for computer multicore cable, shield wire, headset cable, mouse cable, data cable, telephone cable, flat ribbon cable and etc thin cables, general purpose wire gauge is awg18-awg32, wire diameter is 1.8 mm above core wires work on this machine well.
Descriptions
Die and clip wire seat distance is short, computer wire or special short line is easy to operation and no scratches or pinch.
Special structure high-speed, all kinds of wire can be patrial tripping, full stripping and easy adjustment.
Double blades design, stripping and cutting one time molding, remove the cutter can be used as single pole.
Machine working video
Specifications:
Model: ll-3f
Wire size: awg18-awg32
Voltage:ac220v/50hz
Strip length: single cutter: 25mm, double cutters: 1.5-5.0mm.
Air pressure:4.5-7kg
Diamension:260*150*270mm
Feature:
Suitable for high temperature wire and all kinds of multicore cables.
Cutting stripping finalized in one time, single or double cutters can be optional for stripping.
Copper wire,platinum wire and silk wire can be stripped clearly,no nylon string.
suitable for computer multicore cable, shield wire, headset cable,mouse cable,data cable,telephone cable, flat ribbon cable and etc thin cables, general purpose wire gauge is AWG18-AWG32, wire diameter is 1.0 mm above core wires work on this machine well.
Specifications:
Model: LL-3FA
Wire Size: AWG18-AWG32
Voltage:AC220V/50HZ
Stroke Height: Max 20mm
Strip Length: 20mm
Air Pressure:5.0-7.0KG
Diamension:260*150*270mm
Net Weight: 9.5KG
Feature:
Is suitable for computer multicore cable, shield wire, headset cable,mouse cable,data cable,telephone cable, flat ribbon cable and etc thin cables, general purpose wire gauge is AWG18-AWG32, wire diameter is 1.8 mm above core wires work on this machine well.
Descriptions
Die and clip wire seat distance is short, computer wire or special short line is easy to operation and no scratches or pinch.
Special structure high-speed, all kinds of wire can be patrial tripping, full stripping and easy adjustment.
Double blades design, stripping and cutting one time molding, remove the cutter can be used as single pole.
Specifications:
Model: LL-3FN
Wire Size: AWG18-AWG32
Voltage:AC220V/50HZ
Strip Length: single cutter: 25mm, double cutters: 1.5-5.0mm.
Strip & Twist: 1-10 pcs/time, AWG18-AWG32
Air Pressure:4.0-7.5KG
Diamension:320*230*300mm
Net Weight: 15KG
Feature:
Is suitable for jacket cable processing, such as multicore data cable, power cord jacket and core
Wires stripping at the same time, more convenient for adjusting stripping length, comparing
The traditional stripping method that strip jacket then core wires, much save human labor and easy operation.
Feature:
is suitable for small wire cable processing, such as AC/DC, power cord, computer cable, electronic cable, multi-core cable.
Cutter Types & Options:
Stripping cutter 1 set (2 pieces), LL-305 will be equipped with flat cutter in default, other models with v-cutter in default, flat cutter suits for flat cable, v-cutter suits for wire diameter 4.0mm or less (may adjust the size), round cutter suits for wire diameter 4.0mm above (diffirent wire size,diffirent round cutter size).
Please kindly provide your wire diameter and insulation thickness for choosing a suitable blade and model.
Machine Working Video
Specifications
Model No.
LL-305
LL-310
LL-315
LL-330
LL-416
LL-520
Stroke
50mm
100mm
150mm
330mm
150mm
500mm
Stripping (Diameter)
Max 7mm
Max 12mm
Max 18mm
Max 20mm
Max 25mm
Max 40mm
Power Voltage
AC 110V/220V/60Hz/20Hz
Air Pressure
3-7KG/CM2
Force
31-73kg
49-115kg
84-196kg
84-196kg
165-300kg
400kg
Net.Weight
20KG
25KG
35KG
65KG
45KG
102KG
Size: mm
400x300x270
480x330x280
660x390x340
1100x550x450
615x425x375
900x700x600
Thermostat Digital Display Hot Wire Stripping Machine
Whether to provide custom processing: No
Type: Wire stripping machine
Model: LL-150
Minimum cutting length: 0.5 (mm)
Maximum cut length: 25 (mm)
Power supply voltage: 220 (V)
Stripping range: AWG # 18-32 (mm²)
power: 200W
Features:
1. This machine is designed for multi-core computer line and various multi-core lines;
2. Peeling off once completed, can be used single-handedly stripping and pole;
3. Simple, fast and effort;
4. Copper, platinum, nylon thread stripping no irregular.
Applicable wire: 5MM diameter of these strands, USB cable, headphone cable, isolated lines, computer lines, cables and lines, all kinds of single-core cable
Product features:
1. The machine is powerful, can double dip tin, single-end stranding and soldering, double ends stranding and soldering, ultra short wire stripping and soldering.
2. Wire feeding part in front-end of this machine adopts two sets of wire feeding wheels to make machine more stable control wire length while it's being produced 10 wires simultaneously, the rear part adopts cylinder braking mechanism for rear-end stripping.
3. The main part of the machine is the use of japanese sanyo stepper motor drive, panasonic plc control system, its operation is simple, accurate positioning, high accuracy, long service life, etc.
Machine working video
Machine working video
Machine working video
Technical parameters
Model no.
Fully automatic double-ends wire soldering machine bj-z803
Function
Wire cutting, single/double-end stranding soldering
Wire range
Ul1007 22awg-32awg
Speed
7000-18000 pcs/hour (decided by wire)
Wire cutting length
8mm-9999mm
Cutting accuracy
+/-0.1mm
Wire stripping length
Front:10mm rear:10mm
Stranding length
Front:10mm rear:10mm
Pressure capacity
0.5mpa-0.7mpa
Blade material
Import tungsten steel/high speed steel
Power
Ac220v
774 Reinforcement Mesh Suppliers
Short on time? Let Reinforcement Mesh sellers contact you.
