40G&100G Transponder supports three 40G or 100G service access. The wide range of optical infrastructure solutions includes media conversion, signal repeating, lambda conversion.
Function:
Media conversion
Signal repeating
Lambda conversion
Highlight:
Support single channel 40Gbps/100Gbps large particle transmission
Client side interface: support 3xQSFP28 module
Line side interface: support 3xQSFP28 module
Support DDM digital diagnosis
Support ALS function
Support LFP function
40G&100G Transponder supports three 40G or 100G service signals are relayed and amplified, and can be converted into three WDM standard wavelength optical signals, so that the multiplex unit can perform wavelength division multiplexing demultiplexing on optical signals of different wavelengths. A metropolitan wavelength division short-range transmission scheme suitable for 40G or 100G rates.
BACnet/IP I/O Controller
Item No.: BL207
BL207 BACnet/IP I/O controller is used for data acquisition and controlling smart devices in buildings to manage energy use, HVAC, lighting, and detection. The BACnet I/O sytem is designed for building automation systems.
OPC UA I/O Controller
OPC UA I/O Controller BL205 was designed for IIOT applications, adopts embedded Linux system, supports customerized development applications, built-in logic programmable function module, is compatible with OPC UA Protocol.
OPC UA I/O Controller BL205 supports dual network port cascade communication, and can support up to 32 IO modules, including AI, AO, DI, DO, RTD, TC, RS485, RS232, etc.,
OPC UA I/O Controller BL205 integrates data acquisition, automatic control, Logic program, customerized application, and edge computing, suitable for creating a high-speed, stable and reliable industrial IoT automation control system.
PROFINET I/O Coupler
PROFINET I/O Coupler BL201 designed for industrial Real Time Ethernet, it adopts embedded Linux system, equips with Real-Time Ethernet interface chip and a dual-port memory, supports two communication channels for Real-Time Ethernet equipped with PHY or fieldbus, compatible with PROFINET, fast SPI host interface with Read/Write functions.
PROFINET I/O Coupler BL201 supports dual network port cascade communication, and can support up to 32 IO modules, including AI, AO, DI, DO, RTD, TC, RS485, RS232, etc.,
PROFINET I/O Coupler BL201 integrates a Network controller for fieldbus and Real-Time Ethernet slaves, suitable for creating a high-speed, stable and reliable Industrial Real-Time Ethernet networks and profinet fieldbus network.
890 Networking Internet Peripherals Suppliers
Short on time? Let Networking Internet Peripherals sellers contact you.
SFP+ Multi-Rate Quad Transponder has 8 SFP+ slots, The device provides a flexible transmission of various protocols, such as 1G/10G Ethernet, SDH STM16/STM64, OTU1/OTU1e/OTU2/OTU2e, Fiber Channel 1/2/4/8/10, CPRI, etc. The SFP+ transponder supports multi-rate functionality with optical data rates from 1Gbps up to 10Gbps; The wide range of optical infrastructure solutions includes media conversion, signal repeating, lambda conversion.
Function:
Media conversion
Signal repeating
Lambda conversion
Highlights
3R signal regeneration
Re-transmission
Re-shaping
Re-timing
Multi-rate supports 1Gbps ~ 10Gbps
Supports Loopback Test
Supports ALS, LFP
Flexible transmission of various protocols
Fiber Channel 1/2/4/8 /10Gbps
CPRI: 2/3/4/5/6/7
1G/10G Ethernet
SDH STM-4/16/64
The 400G Muxponder Transmitter supports four QSFP28 client interface and one CFP2 line-side interface to support single-channel 400Gbps large-grain data transfers. The industry's most advanced coherent technology and FEC forward error correction coding technology enable high-capacity, long-distance high-performance transmission.
Function
Media conversion
Signal repeating
Lambda conversion
Highlight
Support single channel 400Gbps
Client Side: 4x QSFP28 module
Line Side: CFP2 400Gbps coherent module
Ultra-long-distance transmission: FEC technology can be used to achieve 1000km transmission without regeneration
Large dispersion tolerance: 20000ps.nm
Support port loopback test
Support 80 channel wavelength tunable
HTF 400G Muxponder includes integrated OTN FEC capability on the transponder, allowing operation over longer distances or in applications requiring ultra-low bit error rates.
The 400G Muxponder from HTF offer a choice of pluggable QSFP28 Client Side Optics and CFP2 -DCO Coherent DWDM Line Side Optics based on distance and capacity requirements.
The Coherent DWDM Optics are the most technologically advanced and offer benefits on dispersion management, signal reach, and other optical properties. Coherent DWDM Optics can greatly increase the capacity and reach of an optical network, The 400G Muxponder models fits for HT6000 series CH04, CH08, CH20 chassis.
This transponder is a 10G fiber to fiber 3R converter repeater and transponder. This transponder supports SFP+ to SFP+ or XFP to XFP fiber connections. 1+1 Automatic optical line Protection Switching is supported for the Line ports. The transponder is protocol transparent, providing 3R (Re-amplification, Re-shaping and Re-clocking) between these different optical module types.
Supports Loopback Test
Supports ALS
Flexible transmission of various protocols
Fiber Channel 1/2/4/8 /10Gbps
CPRI: 2/3/4/5/6/7
1G/10G Ethernet
SDH STM-4/16/64
The modules enable an extremely wide range of optical infrastructure solutions including media conversion, signal repeating, lambda conversion, and Wave Division Multiplexing(WDM). Especially suitable for DWDM ring network protection. The redundant multi-rate dual transponder fit HT6000 Series CH04, CH08, CH20 Chassis.
Description
The 200G Muxponder Transmitter supports two QSFP28 client interfaces and one CFP2 line-side interface to support single-channel 200Gbps large-grain data transfers. The industry's most advanced coherent technology and FEC forward error correction coding technology enable high-capacity, long-distance high-performance transmission.
Function
* Media conversion
* Signal repeating
* Lambda conversion
Product Highlights
* Support single channel 200Gbps
* Client Side: 2x QSFP28 module
* Line Side: CFP2 200Gbps coherent module
* Ultra-long-distance transmission: FEC technology can be used to achieve 1500km transmission without regeneration
* Large dispersion tolerance: 4nm
* Support port loopback test
* Support 80 channel wavelength tunable
HTF 200G Muxponder includes integrated OTN FEC capability on the transponder, allowing operation over longer distances or in applications requiring ultra-low bit error rates.
The 200G Muxponder from HTF offer a choice of pluggable QSFP28 Client Side Optics and CFP2 -DCO Coherent DWDM Line Side Optics based on distance and capacity requirements.
The Coherent DWDM Optics are the most technologically advanced and offer benefits on dispersion management, signal reach, and other optical properties. Coherent DWDM Optics can greatly increase the capacity and reach of an optical network, The 200G Muxponder models fits for HT6000 Series CH04, CH08, CH20 Chassis.
The 100G OTN Transmitter supports one QSFP28 client interface and one CFP line-side interface to support single-channel 100Gbps large-grain data transfers. The industry's most advanced coherent technology and FEC forward error correction coding technology enable high-capacity, long-distance high-performance transmission.
DWDM Optical Add/Drop Multiplexer (OADM) is a passive optical device used in WDM networks for adding and dropping one/multiple 100 GHz DWDM channels in the C-band into one or two fibers, while letting the rest of the wavelengths bypass to the needed destination. Using the DWDM technology can add effectively WDM capability to their existing and new networks, and extend the optical signals transmission distance.
DWDM OADM modules are available in single-side (East or West) and dual-side (East and West) configurations. With matching MUX/DEMUX units placed at each end of an optical link, multiple data channels can be combined and transmitted over a single-mode fiber trunk. The passive OADM modules can add or drop 2, 4, 8 data channels at any point along the trunk.
The HT6000-OD/OM16 from HTF is a combined passive Sixteen-Channel 100GHz DWDM multiplexer or de-multiplexer (MUX or DEMUX), It combines standard 100GHZ DWDM ITU grid channels 21 through 60, and applies to 1U chassis ,2U chassis and 5U chassis,occupying one service slots.
The HT6000-OD/OM16 is ideal for increasing the fiber capacity between two sites without the need for installing or leasing additional fibers. The complete passive solution requires no power cabling and no configuration; it is a true plug and play solution.
The Mux/Demux enables separation of the active equipment from wavelength multiplexing components. It may be used in conjunction with active optical devices from HTF or from another DWDM-compliant manufacturers.
This transponder is a 10G fiber to fiber 3R converter repeater and transponder. This transponder supports SFP+ to SFP+ or XFP to XFP fiber connections. 1+1 Automatic optical line Protection Switching is supported for the Line ports. The transponder is protocol transparent, providing 3R (Re-amplification, Re-shaping and Re-clocking) between these different optical module types.
The modules enable an extremely wide range of optical infrastructure solutions including media conversion, signal repeating, lambda conversion, and Wave Division Multiplexing(WDM). Especially suitable for DWDM ring network protection. The redundant multi-rate dual transponder fit HT6000 Series CH04, CH08, CH20 Chassis.
SFP+ Multi-Rate Quad Transponder has 8 SFP+ slots, The device provides a flexible transmission of various protocols, such as 1G/10G Ethernet, SDH STM16/STM64, OTU1/OTU1e/OTU2/OTU2e, Fiber Channel 1/2/4/8/10, CPRI, etc. The SFP+ transponder supports multi-rate functionality with optical data rates from 1Gbps up to 10Gbps; The wide range of optical infrastructure solutions includes media conversion, signal repeating, lambda conversion.
Media conversion
Signal repeating
Lambda conversion
3R signal regeneration
Re-transmission
Re-shaping
Re-timing
Multi-rate supports 1Gbps ~ 10Gbps
Supports Loopback Test
Supports ALS, LFP
Flexible transmission of various protocols
Fiber Channel 1/2/4/8 /10Gbps
CPRI: 2/3/4/5/6/7
1G/10G Ethernet
SDH STM-4/16/64
The main field of application is CWDM and DWDM networks. As an intelligent transponder module, SFP+ Transponder converts a transparent data channel to a corresponding CWDM/DWDM wavelength.
By means of the implemented 3R functionality (re-amplification, re-shaping, re-timing) for signal processing, the module is also suited for the use as a repeater, The SFP+ transponder models fit HT6000 Series CH04, CH08, CH20 Chassis.
SFP28 Multi-Rate Quad Transponder has 8 SFP28 slots, The device provides a flexible transmission of various protocols, such as 100M/1G /10G/25G Ethernet, SDH STM1/STM4/STM16/STM64, Fiber Channel 1/2/4/8 /10/16/32Gbps, CPRI, etc.
The SFP28 transponder supports multi-rate functionality with optical data rates from 1Gbps up to32Gbps;The wide range of optical infrastructure solutions includes media conversion, signal repeating, lambda conversion.
Media conversion
Signal repeating
Lambda conversion
The main field of application is CWDM and DWDM networks. As an intelligent transponder module, SFP28 Transponder converts a transparent data channel to a corresponding CWDM/DWDM wavelength. The module is also suited for the use as a repeater,The SFP28 transponder models fit HT6000 Series CH04, CH08, CH20 Chassis.
40G/100G Transponder supports three 40G or 100G service access. The wide range of optical infrastructure solutions includes media conversion, signal repeating, lambda conversion.
Support single channel 40Gbps/100Gbps large particle transmission
Client side interface: support 3xQSFP28 module
Line side interface: support 3xQSFP28 module
Support DDM digital diagnosis
Support ALS function
Support LFP function
40G&100G Transponder supports three 40G or 100G service signals are relayed and amplified, and can be converted into three WDM standard wavelength optical signals, so that the multiplex unit can perform wavelength division multiplexing demultiplexing on optical signals of different wavelengths. A metropolitan wavelength division short-range transmission scheme suitable for 40G or 100G rates.
The 400G Muxponder Transmitter supports four QSFP28 client interface and one CFP2 line-side interface to support single-channel 400Gbps large-grain data transfers. The industry's most advanced coherent technology and FEC forward error correction coding technology enable high-capacity, long-distance high-performance transmission.
HTF 400G Muxponder includes integrated OTN FEC capability on the transponder, allowing operation over longer distances or in applications requiring ultra-low bit error rates.
The 400G Muxponder from HTF offer a choice of pluggable QSFP28 Client Side Optics and CFP2 -DCO Coherent DWDM Line Side Optics based on distance and capacity requirements.
The Coherent DWDM Optics are the most technologically advanced and offer benefits on dispersion management, signal reach, and other optical properties. Coherent DWDM Optics can greatly increase the capacity and reach of an optical network, The 400G Muxponder models fits for HT6000 series CH04, CH08, CH20 chassis.
The 100G OTN Transmitter supports one QSFP28 client interface and one CFP line-side interface to support single-channel 100Gbps large-grain data transfers. The industry's most advanced coherent technology and FEC forward error correction coding technology enable high-capacity, long-distance high-performance transmission.
Support single channel 100Gbps
Client side: QSFP28 module
Line side: CFP 100Gbps coherent module;
Ultra-long-distance transmission: FEC technology can be used to achieve 1500km transmission without regeneration
Large dispersion tolerance: 40000ps.nm
Support port loopback test
Support 80 channel wavelength tunable
HTF 100G Transponder includes integrated OTN FEC capability on the transponder, allowing operation over longer distances or in applications requiring ultra-low bit error rates.
The 100Gbps Transponders from HTF offer a choice of pluggable QSFP28 Client side optics and CFP Coherent DWDM line side optics based on distance and capacity requirements.
The Coherent DWDM Optics are the most technologically advanced and offer benefits on dispersion management, signal reach, and other optical properties. Coherent DWDM Optics can greatly increase the capacity and reach of an optical network, The 100G Transponder models fit for HT6000 Series CH04, CH08, CH20 Chassis.
SL2.1A is a single 5V power supply chip. The Integrated LDO(Include one
5v->3.3v LDO and one 3.3v->1.8v LDO) make the solution so simple. Only
some capacitances needed for PCB. The chip also integrates Power-On-Reset
circuit.
Fully compliant with USB spec. Rev 2.0(USB 2.0)
12M crystal oscillator must be matched when using SL2.1A
5
Upstream facing port supports HS (480MHz) and FS(12MHz) modes
4 downstream facing ports support HS(480MHz), FS(12MHz) and
LS(1.5MHz) modes.
Integrated USB 2.0 Transceivers.
Connected external 12MHz Crystal Oscillator is recommended for this chip.
890 Networking Internet Peripherals Suppliers
Short on time? Let Networking Internet Peripherals sellers contact you.
