Photoresistor is a resistor which made of semi-conductor material, and the conductance changes with luminance variation . The photoresistor can be manufactured with different figures and illuminated area based on this characteristic.Photoresistor is widely used in many industries, such as toys, lamps, camera, etc.
Performances and Features
Coated with epoxy
Good reliability
Small volume
High sensitivity
Fast response
Good spectrum characteristic
Typical Applications
1. Camera automatic photometry
2. Photoelectric control
3. Indoor ray control
4. Annunciator
5. Industrial control
6. Light control switch
7. Light control lamp
8. Electronic toy
The pyroelectric infrared sensor detects infrared radiation on the basis of the characteristics that the polarization of pyroelectric material changes with temperature. Dual compensated sensing elements are applied to suppress the interference resulting from temperature variation. As a result, the operating stability of the sensor is greatly improved Our products can be used in many applications.
1. Security systems
2. Burglar alarms
3. Visitor acknowledgement
4. Light switch control
5. Intellectualized toy
Synthetic quartz: Low etch channel, low inclusion, high Q grade for crystal and optical applications.
Quartz Blanks: AT and SC cut, round, strip, bevelled and polished.
Quartz Monitor Crystals: 5MHz and 6 MHz with gold, silver, or stress-reducing alloy electrode.
Crystal Units
Frequency: 3.5-80MHz
Load capacitance: 8-30pf or Series
Freq. Tol. @ 25 degree: +/- 10~+/-100
Freq. Stability: +/- 5~+/-100
Temp. Range: -10~+60 degree, -20~+70 degree, -40~+85 degree.
Crystal Oscillator with Wide Frequency Range,RoHS Compliant
SPXO
Frequency: 1-700MHz
Supply Voltage: 1.8-5V
Freq. Stability: +/- 20~+/-100
Temp. Range: -10~+60 degree, -20~+70 degree, -40~+85 degree
Output: CMOS/TTL, PECL/LVDS
Packaging: Tape & reel package for automatic assembly.
Future: Low jitter, low standby current, high frequency.
2 item are programmable with 1-200MHz frequency and 2.5x2mm or 3.2x2.5mm size.
Voltage controlled Temperature compensated Crystal Oscillator (VCTCOX)
Frequency: 1.25-160MHz
Supply Voltage: 2.4-5V
Freq. Stability: +/- 0.5~+/-5
Temp. Range: 0-55 degree, -10~+60 degree, -20~+70 degree, -40~+85 degree
Output: Clipped Sine Wave, CMOS, PECL, LVDS
Future: Low power consumption, high precision
X2-MKP are non-inductively wound with metallized polypropylene film as dielectric and electrode, with copper-clad steel leads, encapsulated
in solvent-resistant and self-extinguishing UL94 V0 thermoplastic case, with epoxy resin sealed. They provide interference suppression with
safety approvals. They are Suitable for across the line capacitors, EMI filters, Spark killer circuits, etc.
Features:
Self-healing properties
High moisture resistance
Overvoltage stress withstanding
Flame-retardant plastic case and epoxy resin
Specifications:
Operating temperature: -40 -- +100C
Capacitance range:Capacitance range:
Capacitance tolerance: 10%(K)
Rated voltage:275VAC (50Hz/ 60Hz)
Dissipation factr:0.1% max. at 1KHz, 25C
Insulation resistance:15,000 MOhm min. for Q0.33UF 5,000 MOhm*uF/C min. for C>0.33uF
Dielectric strength: 1200VDC for 60 sec. or 2000VDC for 1 sec.
CL21X-B Minibox metallized polyester film capacitor
Minibox capacitor
Film capacitor
plastic case capacitor
taping capacitor
CL21X-B are non-inductively wound with polyester film as dielectric and electrode, with cooper-clad steel leads and encapsulated in plastic cases, and sealed with epoxy resin. They are suitable for decoupling, by-passing, filteringtreatment of analog signals, rejection of line perturbations, etc.
Features:
Non-inductive construction
Self-healing properties
Space-saving miniature size
Available on tape for automatic insertion
Specifications:
Operating temperature: -40 -- +85C
Capacitance range:0.001uF -- 1.0uF
Capacitance tolerance: 5%(J), 10%(K)
Rated voltage:100/ 250/ 400VDC
Dissipation factr:1.0% max. at 1KHz, 25C
Insulation resistance: 15,000 MOhm min. for 0.33UF 5,000 MOhm*uF/C min. for C>0.33uF
Dielectric strength: 150% of rated voltage for 5 sec.
Loss or taping.
7951 Electronic Semi Conductor Devices Other Components Suppliers
Short on time? Let Electronic Semi Conductor Devices Other Components sellers contact you.
Minibox capacitor
Film capacitor
plastic case capacitor
taping capacitor
CL21X are non-inductively wound with special metallized polyester film as dielectric and electrode, with cooper-clad steel leads and epoxy resin coating. They are suitable for blocking, coupling, decoupling, by-passing, filtering and timing circuits, and are ideal for telecommunicating, Data processing, Industrial instrument & Automatic Control System Equipments.
Features:
Space-saving small size
Self-healing properties
Good solderability
Available on tape for automatic insertion
Specifications:
Operating temperature: -40 -- +85C
Capacitance range: 0.0022uF -- 1.0uF
Capacitance tolerance: 5%(J), 10%(K)
Rated voltage: 100VDC
Dissipation factr: 1.0% max. at 1KHz, 25C
Insulation resistance: 10,000 MOhm min. for 0.33UF 3,300 MOhm*uF/C min. for C>0.33uF
Dielectric strength: 150% of rated voltage for 5 sec.
* High voltage capacitor
* Film capacitor
* plastic capacitor
* high pluse capacitor
CBB81 are non-inductively wound with metalized polypropylene film in series with aluminum foil, and polypropylene film, with cooper-clad steel leads and epoxy resin coating. They are ideal for high frequency and high pluse rise time circuits, and find wide applications in snubbers, high voltage power supplies and electronic lighting ballasts.
Features:
High corona starting voltage
High current rating and high dv / dt
Series electrode construction
Self-healing properties
Specifications:
Operating temperature: -40 -- +85C
Capacitance range:0.001uF -- 0.1uF
Capacitance tolerance: 5%(J), 10%(K)
Rated voltage:1000/ 1250/ 1600/ 2000VDC
Dissipation factr:0.1% max. at 1KHz, 25C
Insulation resistance:50,000 MOhm min. for 0.1UF
Dielectric strength: 150% of rated voltage for 5 sec.
* Green color
* Inductive capacitor
* Film capacitor
* plastic film capacitor
* low ESR
CL11 are constructed with polyester film dielectric and aluminum foil electrode, copper-clad steel leads, and epoxy resin coating in inductive type. They are suitable for blocking, by-passing, coupling, filtering and timing circuits3 and are ideal for TV, Radio, Tape recorder, Stereo, etc.
Features:
High moisture resistance
Good solderability
Low equivalent series resistance (E.S.R.)
Available on tape and reel for automatic insertion
Specifications:
Operating temperature: -40 -- +85C
Capacitance range:0.001uF -- 0.47uF
Capacitance tolerance: 5%(J), 10%(K)
Rated voltage:100/ 250/ 400/ 630/ 1000/ 1250VDC
Dissipation factr:1.0% max. at 1KHz, 25C
Insulation resistance:20,000 MOhm min. for 0.1UF;2,000 MOhm*uF/C min. for C>0.1uF
Dielectric strength: 250% of rated voltage for 5 sec.
Ranges from 18W, 26W, 35W, 55W, 66W, 90W, 91W, 135W etc and the LAX series of electronic ballasts for Low Pressure Sodium lamp developed by leianxun company adopt the SCM CPU digital technique. It insures the intellectual protection of electronic ballasts---keeping the safety of ballasts and the system , when the voltage output terminal is abnormal. In the process of warm-up, triggering, and ignition, the CPU can reach the best state to protect the electrode of lamp /tubes. This is measured by the microsecond controlling span of system and the height of impulse from the trigger voltage. Thus it doubles the longevity of the electrode for lamp tubes greatly.
It is perfect for solar power of street lighting.
Specifications
Material Specification:
Housing: High Temperature thermoplastics: LCP; Color: Black
Contact: Phospor Bronze/Brass
Shell: Brass/Phospor Bronze/SUS301
Plated:
Contact: gold plated (G/F,5U"/10U''/15U''/30U'')
Shell: Gold/Nickel
Materials and plating can be changed according to customer definition.
Specifications
Material Specification:
Housing: High Temperature thermoplastics: LCP; Color: Black
Contact: Phospor Bronze/Brass
Shell: Brass/Phospor Bronze/SUS301
Plated:
Contact: gold plated (G/F,5U"/10U''/15U''/30U'')
Shell: Gold/Nickel
Materials and plating can be changed according to customer definition.
Specifications
Material Specification:
Housing: High Temperature thermoplastics: LCP; Color: Black
Contact: Phospor Bronze/Brass
Shell: Brass/Phospor Bronze/SUS301
Plated:
Contact: gold plated (G/F,5U"/10U''/15U''/30U'')
Shell: Gold/Nickel
Materials and plating can be changed according to customer definition.
Specifications
Material Specification:
Housing: High Temperature thermoplastics: LCP; Color: Black
Contact: Phospor Bronze/Brass
Shell: Brass/Phospor Bronze/SUS301
Plated:
Contact: gold plated (G/F,5U"/10U''/15U''/30U'')
Shell: Gold/Nickel
Materials and plating can be changed according to customer definition.
Specifications
Material Specification:
Housing: High Temperature thermoplastics: LCP; Color: Blue
Contact: Phospor Bronze/Brass
Shell: Brass/Phospor Bronze/SUS301
Plated:
Contact: gold plated (G/F,5U"/10U''/15U''/30U'')
Shell: Gold/Nickel
Materials and plating can be changed according to customer definition.
Material: Crystal Glass Panel and ABS plastic.
Available panel color: White/black or as clients' request.
Dimension: 86*86*33mm
Life Span: 100 000 times minimum.
* Adopted high quality super-white tempered glass panel, individual design,will never fade, your switch will always looks like new; at the same time prevent creepage and electric shock,very safe.
* Adopted imported fireproof ABS plastic material, preventing excessive heat result in fire,greatly reduce the security risks.
* With Led indicator,could find the position of the switch easily in darkness,very distinguished.
* E-start, no sparking contacts.
* More humanization design: the lamp is off when the incoming of electricity again,save electricity.
* No voice when you turn on/off lights,keep your home or office silence.
* Single live wire control,easy to install,replace the old switch directly.
* All brand new imported IC,with more excellent performance and more sensitive touch.
* Applicable to all the common lamps,such as incandescent, fluorescent lamps, tubes,energy-saving lamps and motion sensor lamps, led lamps and so on.
* Suitable for home, office, hotel , hospital and so on.
Technical Parameters:
Dimension: 86*86*33MM
Operating voltage: AC110V-240V/50Hz~60Hz.
Rated load:each way1-300W
Self consuming power:Less than 1mA
Operating environment:-20~50C,Less than 95%RH
Life long: More than 100 000 times
1.Light;
2.High capacity;
3.best quality materials;
4.Fast delivery: Within 3-7days;
5.Intrinsically Safety battery available if needed;
6.Impact-resistant design;
7.Dual protection PCM;
8.Short circuit protection;
9.ultrasonic sealing technology;
10.Safety, leakage of small probability.
Service:
1. We are ready for servicing you;
2.Serve for honor, Good faith is goals;
3.Can be mixed batch;
4.One year warranty;
5.Private white box and plastic;
6.Find problems, please feedback in time;
7.Return shipping out side;
8.Hong Kong-invested (owned) in ShenZhen;
9.Production equipments mainly from USA and Germany;
10.15 years experience in producing two way radio batteris;
11.With experiences staff., you can enjoy the best serve there;
12.Our products have strictly passed with CE,ROHS ,GE, ISO 9000:2008 Cert No.01100056658TUV;
13.Welcome OEM/ODM orders.
Size :120*55.5*32.5mm
Weight: 150g;
Standard: CE UL FCC ROHS.
HNN9008 two way radio battery
For Motorola GP328 two way radio battery
Chinese Cell in 1800mAh
Japanese Sanyo cell in 2500mAh
CE, UL, RoHS, FCC.
1 year warranty.
Individual packing with polymer bag, white box and export carton.
7951 Electronic Semi Conductor Devices Other Components Suppliers
Short on time? Let Electronic Semi Conductor Devices Other Components sellers contact you.
