More Details:
Length of cable:3m
Connector:20pin
Material of cable:TPU
Certificate : CE and ISO 13485
Original of LED/PD:imported
Package:seperate package then put in outer box
Price terms: FOB in Shenzhen
Way of shippment :DHL,UPS,TNT,Fedex,EMS
Compatible Model: All Nellcor and Nellcor equipped OEM monitors. Other: Artema, Datascope, Drager, Corometrics, Critikon, Invivo, Biomedical, Mennen, Nihon Kohden, Philips, Siemens, Spacelabs, Welch Allyn Protocol Propaq CS
OEM Number: DS-100A
Technical Parameters:
LED/PD: 660/905/940
mp)
More Details:
Length of cable: 0.9m
Connector: 7pin
Material of cable: PVC
Certificate: CE and ISO 13485
Original of LED/PD: Imported
Package: As per customers' requirement
Price terms: EXW in Shenzhen
Way of shipment: DHL, UPS, TNT, Fedex, EMS
Gauge pressure sensor with dual in-line package is a small size piezo-resistive pressure sensor. When the input voltage is 3vdc the sensor produces mv dc output voltage which is direct proportion of the input pressure. All the products can be customized according to your requirement.
Features
Solid-state reliability
Low cost
Gauge pressure type:0-40kpa;
Easy to use
Applications
Medical instrumentation & monitoring
Digital blood pressure meter
Environmental monitoring
Consumer & sports
Pressure type
Type
Gauge
Psg010
Gauge
Psg010r
Gauge
Psg010s
Min Typ Max Unit Remarks
Excitation voltage 5.0 V
Excitation current 1 Ma
Span
(fs rang) 40kpa 50 65 80 Mv
Offset -25 0 +25 Mv
Tc span -24 -19 -15.5 %fs/100 celcius Measured at 5v constant voltage excitation.
Tc offset -7 +7 %fs/100 celcius
Tcr +18 +25 +32 % /100
Linearity -0.45 -0.15 +0.45 %fs
Bridge impedance 4.5 5 5.5 K|¸
Proof pressure 2x Fs
Burst pressure 4x Fs
Operating temperature -20 +80 Celcius
Storage temperature ,
The series of pressure sensor is a small size piezo-resistive pressure sensor. The die size is 1x1mm2. When the input voltage is 3vdc the sensor produces mv dc output voltage which is direct proportion of the input pressure. Pressure sensor is the absolute pressure sensor, and we can also offer the differential pressure mode. All the products can be customized according to your requirement.
Features
Solid, mems technique, high reliability
Low cost, tiny size,-1700kpa
Nonlinearity: < 0.20%fso
Silicon/silicon bonding wafer, high stability
Application
For high resolution absolute sensor systems
Engine control
Tire gauge
Barometers, altimeters, variometers, sphygmomanometer
Min Typ Max Unit Remarks
Excitation voltage 5.0 V
Excitation current 1 Ma
Span
Fs rang 100kpa 50 70 90 Mv 1
150kpa,
200kpa,
350kpa,
700kpa,
1000kpa 80 120 180 Mv
1.7mpa 100 150 200 Mv
Offset -35 35 Mv 2
Tc span -24 -19 -15.5 %fs/100 3
Tc offset -7 +7 %fs/100 3
Tcr +18 +22 +33 % /100 3
Linearity -0.45 -0.15 +0.45 %fs 4
Bridge impedance 5 K|¸
Proof pressure 2x Fixed fs
Burst pressure 4x Fixed fs
Operating temperature -40 +125
Storage temperature -55 +150
Notes:
1. Measured at 5v constant voltage excitation.
2. The offset is ¡¡§¡è50mv for 100kpa, 150kpa
3. Measured from 0 to 60 c
4. Defined as best straight line.
Product Characteristics:
Measuring range 0 ~ 100 kpa... 1600 kpa
MEMS technology
Gage pressure form
PCB or ceramic packaging forms
Suitable for non-corrosive gas or liquid
Convenient sealing, high performance-price ratio
Areas of application:
Air conditioners, washing machines, refrigerators and other household appliances
Steering, braking, oil level, oil pressure test, and other automotive electronics areas
Pumps, fire fighting, diving and water pressure test
Water dispensers, coffee machine and other purification equipments
Workshop, environmental monitoring, liquid level measurement, etc
Product overview:
This piezoresistive pressure sensitive component is a type of pressure sensor suitable for pump, automotive electronics, drinking water, etc. its core is a silicon piezoresistive pressure sensitive chip adopting MEMS technology processing. The pressure sensitive chips by a elastic membrane and integrated membrane on the four resistors, four varistor formed the structure of wheatstone bridge, bridge produces a voltage output signal which has a linear proportional relationship with the added pressure when pressure effects on the elastic membrane.
This pressure sensitive component is OEM component adopting PCB assembly, can be electrical connected through the welding line or the pin, suitable for the O ring seal.
Good linearity, repeatability and stability, high sensitivity, convenient for users' output debugging adopting op-amp or integrated circuit.
Including with temperature compensation and without temperature compensation. Pressure on the back way.
standard packaging
429 Electric Sensors Suppliers
Short on time? Let Electric Sensors sellers contact you.
The tgs 2600 has high sensitivity to low concentrations of gaseous air contaminants such as hydrogen and carbon monoxide which exist in cigarette smoke. The sensor can detect hydrogen at a level of several ppm.
Due to miniaturization of the sensing chip, tgs 2600 requires a heater current
Of only 42ma and the device is housed in a standard to-5 package.
4S Rev. 2 CiTiceL Sulfur Dioxide Sensor (SO2 Sensor) Key Features & Benefits:
* Industry leading reliability
* Improved performance variability
4S Rev. 2 CiTiceL Sulfur Dioxide Sensor (SO2 Sensor) Technical Specifications
* Operating Principle: 3-electrode electrochemical
* Measurement Range: 0-20 ppm SO2
* Maximum Overload: 150 ppm SO2
* Filter: To remove H2S
* Sensitivity: 0.5 ± 0.1 µA/ppm
* Response Time (T90): < 25 Seconds at 20 deg C
* Repeatability: < ±2% of signal
* Recommended Storage Temp: 0 - 20 deg C
* Operating Humidity: 15% to 90%RH non-condensing
Poisoning
CiTiceLs are designed for operation in a wide range of environments and harsh conditions. However, it is important that exposure to high concentrations of solvent vapours is avoided, both during storage, fitting into instruments, and operation.
When using sensors with printed circuit boards (PCBs), degreasing agents should be used before the sensor is fitted. Do not glue directly on or near the CiTiceL as the solvent may cause crazing of the plastic.
NH3 3E 100 Ammonia Sensor (NH3 Sensor) FEATURES
* Amperometric 3 electrode sensor cell
* Fixed organic gel electrolyte
* No CO2 interference
* 0 volt bias operation
NH3 3E 100 Ammonia Sensor (NH3 Sensor) TYPICAL APPLICATIONS
* TLV-monitoring, leakage detection
* Fixed point applications in cold storages & refrigeration plants only
* For other applications please use NH3 3E SE versions
* No background concentrations of ammonia & alcohols
NH3 3E 100 Ammonia Sensor (NH3 Sensor) TECHNICAL SPECIFICATIONS
* Measuring Range: 0-100 ppm
* Sensitivity Range: 90 nA/ppm ± 40 nA/ppm
* Zero Current at 20 deg C: < ± 150 nA
* Resolution at 20 deg C: < 2 ppm
* Bias Potential: 0 mV
* Linearity:
NAP-57A Catalytic Type Gas Sensor Description
NAP-57A is a newly developed catalytic type gas sensor based on conventional type NAP-56A for not only residential but also commercial or semi-industrial applications because of having highly excellent poisoning resistivity. Since its power consumption and pin positions are completely the same as NAP-55A and 56A, it is easily replaceable as it is. However, it does not possess the explosion proof by itself, then it is recommended to install it into an explosion proof chamber for actual application.
NAP-57A Catalytic Type Gas Sensor Features
* Good stability
* Excellent repeatability and detection accuracy
* Good linearity against gas concentration at wide range
* Quite excellent poisoning resistivity
* Down sizing for design flexibility of gas alarm or detector
NAP-57A Catalytic Type Gas Sensor Usage
* Gas alarm or detector of general combustible gases for all applications
* Gas densitometer
* Driving module for gas leakage detector
NO-B1 Nitric Oxide Sensor (NO Sensor) Description
Alphasense Nitric Oxide gas sensors operate using proven fuel cell technology.
NO-B1 Nitric Oxide Sensor size:
32mm diameter package, the best choice for fixed site applications
The NO range provides OEMs with reliable sensors for use in a number of high volume applications. Strong signal levels combined with low zero current allows resolution to 200 parts per billion (ppb) whilst giving linear outputs to as high as 250ppm. The sensors are suitable for inclusion in fixed installation sensing heads, portable safety instruments, urban air monitoring and stack gas analysers.
Alphasense NO sensors provide a significant improvement in stability of response to transient relative humidity changes.
The NO sensors offer our electrolyte leak-free guarantee and reliable long-term detection performance. The leakproof housing is moulded with a colour coded top for ease of identification.
NO-B1 Nitric Oxide Sensor (NO Sensor) Specification
* Range: 250ppm NO limit of performance warranty
* Sensitivity: 400 to 620nA/ppm in 50ppm NO
* Resolution: < 0.15 RMS noise (ppm equivalent)
* Response time t90: < 30s from zero to 50ppm NO
* Temperature range: -30 to 50 deg C
* Pressure range: 80 to 120 kPa
* Humidity range: 15 to 90 % rh continuous
* Weight: < 13g
RESP_IRR_20 P
15x15 Respiratory Irritant Sensor 20 ppm P Package 110-901
RESP_IRR_20 P Respiratory Irritant Sensor Description
RESP_IRR_20 is a Screen Printed ElectroChemical sensor component specifically designed for the broad detection of respiratory irritant gases: NO2, Ozone, Chlorines, SO2, H2S and odorous gases.
RESP_IRR_20 P Respiratory Irritant Sensor Benefits
* Zero Power Sensor
Sensor Circuit - < 10 uW max
* Sensitive - In the ppb range
* Cold operation - No Heating required
* Stable Response - Not affected by humidity, CO2, N2, Ar, most saturated hydrocarbons, hexane, ammonia,
* Small Size& Low Profile - 20 x 20 x 3 mm
* Easy to Use - Linear Response
* Long Life - 10 years expected life
* Fast Response - < 60 seconds
* ROHS Compliant
RESP_IRR_20 P Respiratory Irritant Sensor Applications
* Bad Air Quality Detection
* Indoor Air Monitor
* Air Purifier Controls
* Weather Stations
* Internet of Things
* Smart Homes
* Leak Detection
* HVAC Ventilation Control
* Telemedicine Equipment
RESP_IRR_20 P Respiratory Irritant Sensor Specifications
* Measurement Range: 0 to 20 ppm
* Response Time to 90%: < 60 seconds typical
* Sensitivity: -50 +/- 25 nA/ppm
* Long Life: 10 years expected life
* Fast Response: < 60 seconds
* Operating Temperature: -10 to 40 deg C
* Operating Humidity: 0 to 100% RH non-condensing
IRC-A1 Infrared Carbon Dioxide (CO2) Sensor Description
Alphasense CO2 and Methane infrared sensors are supplied in the industry standard miniature (20mm diameter) gas sensor housing.
Patented optics give the best signal to noise ratio of any 20mm diameter NDIR and universal linearisation constants allow easy implementation.
The on-board temperature sensor allows for software compensation, including ideal gas law correction.
CO2
The IRC-A1 with dual channel pyroelectric detector. This CO2 sensor is designed for IAQ, safety, combustion and high CO2 process control applications.
Application notes explain linearisation, temperature compensation and circuitry.
The IRC-A1 cover the entire concentration range of measurement, simply implement the appropriate linearisation constants in software for your required range:
IAQ: 0 to 5,000ppm CO2
Safety: 0 to 5% CO2
Combustion: 0 to 20% CO2
Process control: 0 to 100% CO2
Matched Transmitter board for IRC-A1 Infrared CO2 Sensor
IRC-TX NDIR CO2 Transmitter Board Features
* Both 4-20mA and USB output
* Uses Alphasense IRC-A1 NDIR cell
* Adjustable bulb voltage to optimise long-term stability vs. resolution
NO2-A1 Nitrogen Dioxide Sensor (NO2 Sensor) Description
Alphasense Nitrogen Dioxide gas sensors operate using proven fuel cell technology.
NO2-A1 Nitrogen Dioxide Sensor size:
20mm diameter, the industry standard size for portable gas detectors
The NO2 range provides OEMs with reliable sensors for use in a number of high volume applications. Strong signal levels combined with low zero current allows resolution to 50 parts per billion (ppb) and an operating range to 20ppm. The sensors are suitable for use in fixed installation sensing heads, portable safety instruments, urban air monitoring and stack gas analysers.
The NO2 sensors offer our electrolyte leak-free guarantee and reliable long-term detection performance. The leakproof housing is moulded with a colour coded top for ease of identification.
NO2-A1 Nitrogen Dioxide Sensor (NO2 Sensor) Specifications
* Range: 20 ppm NO2 limit of performance warranty
* Sensitivity: -250 to -650 nA/ppm in 10ppm NO2
* Response time t90: < 50 (s) from zero to 10ppm NO2
* Resolution: < 0.02 RMS noise (ppm equivalent)
* Temperature range : -20 to 50 deg C
* Pressure range: 80 to 120 kPa
* Humidity range: 15 to 90 % rh continuous
* Weight: < 6 g
TD40 Wireless Particle Monitor Overview
The TD40 is a sensitive and concise airborne particle measurement sensor. This unit is well suited to carrying out precise measurements of particle densities in clean and dust free facilities. The unit acquires the current particle concentration in the environment though it's internal air circulation system and particle concentrations at precise diameter intervals are calculated based on the scattering of a laser source. The measurement of concentrations of particles within specific diameter intervals is performed using advanced digital signal processing electronics.
TD40 Wireless Particle Monitor Typical Applications
* Monitoring of dust sensitive manufacturing environments
* Food production and packaging facilities monitoring
* Healthcare environment monitoring
* Office and factory indoor air quality monitoring
TD40 Wireless Particle Monitor Features
* Particle Sensor: 16 Particle Bin sensor that counts particles in the range of 0.38µm to 17µm
* Temperature Sensor: Important measure for a controlled environment
* Wireless: Enables you to connect multiple sensors
* Alert: Get real-time alerts when the values go outside set limits
* Humidity Sensor: Measures the relative humidity in the room
* Easy Set-up: Plug and Play Technology will have the sensor running in minutes
CM8 Carbon Monoxide Sensor Features:
1. More than ten years long life, electrochemical principle
2. Low sensitivity to ethanol;
3. Can reduce the influence of various interference gases, good linear output characteristics;
4. Consistency is very good;
5. The carbon monoxide gas selectivity and repeatability is very good;
6. The sensor signal output and the concentration of carbon monoxide gas into a linear relationship;
7. The leading production technology and new advanced materials;
8. Electrolyte pollution, materials comply with RoHS requirements;
9. Strong anti-interference;
10. The shell thicker will never rust, the new material used in component feet is conductive.
NH3-A1 Ammonia Sensor NH3 Sensor Description
Alphasense is expanding its line of electrochemical toxic gas sensors to address industry-specific requirements, including emissions monitoring, process safety, environmental monitoring and VOCs.
Ammonia (NH3)
Our first family of Ammonia sensors. This sensor is designed for higher concentrations of Ammonia. Sensors for lower level detection are in development.
NH3-A1 Ammonia Sensor NH3 Sensor Specifications
* Range: 200 ppm NH3 limit of performance warranty
* Sensitivity: 17 to 27 nA/ppm in 50ppm NH3
* Response time t90:
3SP_O3_5 P
15x15 O3 Sensor 5 ppm Pinned Package 110-406
3SP_O3_5 P Ozone Sensor O3 Sensor Description
SPEC's printed sensors offer the performance of the best quality electrochemical sensors at a fraction of the price. SPEC's printed sensors are also ultra-thin, offering easy integration into wireless, portable, and networked solutions. These sensors are ideal for health, environmental, industrial and residential monitoring, because of their high performance, low cost and small size.
3SP_O3_5 P Ozone Sensor O3 Sensor Benefits
* Small Size with Low Profile (20x20x3 mm)
* Long Life (10 years expected life)
* Fast Response (< 15 seconds)
* Low Power Consumption
* Individually Calibrated (NIST Traceable)
* ROHS Compliant
* Improved stability and ppb performance
3SP_O3_5 P Ozone Sensor O3 Sensor Applications
* Air Quality Monitoring
* Industrial Safety
* Air Purification Control
ETO-A1 Ethylene Oxide Sensor ETO Sensor Description
Alphasense is expanding its line of Electrochemical Toxic Gas Sensors to address industry-specific requirements, including emissions monitoring, process safety, environmental monitoring and VOCs.
Ethylene Oxide (C2H4O)
The ETO is a general purpose sensor, primarily developed for monitoring Ethylene Oxide but also capable of measuring other volatile organic compounds (VOCs). Our toxic evaluation board allows easy adjustment of the bias voltage to optimise this sensor for the required application.
See application note AAN113.
Available in A and B series
ETO-A1 Ethylene Oxide Sensor ETO Sensor Specifications
* Range: 100 ppm EtO limit of performance warranty
* Sensitivity: 2000 to 3200 nA/ppm in 20ppm EtO
* Response time t90: < 150s from zero to 20ppm EtO
* Resolution: < 0.1 RMS noise (ppm equivalent)
* Temperature range: -30 to 50'C
* Pressure range: 80 to 120kPa
* Humidity range: 15 to 90% rh continuous
* Weight: < 6 g
429 Electric Sensors Suppliers
Short on time? Let Electric Sensors sellers contact you.
