SEP-1900 is a one component sealant based on silane end-capped polyether, without solvent, free isocyanate, small organic silicon molecule and polymer.It is environmental friendly, low VOC, and would not dirt the substrate, which is curing by absorbing the moisture from air in the room temperature.It performs excellent bonding to variety of construction materials, such as concrete, cement, stone, glass, ABS, PC, etc., therefore it could be widely used in construction and infrastructure areas.It has following characteristics:
ï??High transparency, would not turn yellow.
ï??Good operability: one component, easy to apply.
Environmental friendly: no solvent, low VOC, without dirt the substrate.
Excellent adhesive: bond well to variety materials, such as concrete, cement, stone, glass, and other construction materials.
MS2000 is a one component silane end-capped polyether sealant, containing no solvent, no isocyanate, no small organic silicon molecule nor polymer.
It's environmental friendly, low VOC, without contaminating substrate. It is cured by absorbing the moisture in the air at room temperature.
Usually not need a primer before apply. It could adapt to thermal expansion and contraction duo to inherent elasticity,
It performs good adhesive to variety of construction materials such as concrete, cement, stone, glass, etc., therefore it could be commonly used.
We mainly produce Silicone tapes,silicone print tape,silicone print band, silicone print ribbon, silicone antiskid head lamp belt,silicone anti-slip belt,silicone print belt, silicone non-slip tape,silicone no-skid tape,Knitted Elastic tapes,Woven Elastic tapes,,silicone gripper tape for clothing,silicone printed logo tapes,etc
Order process:
1 send me your artwork to quote,
2 after confirm the price, we will make the artwork for you approve,
3 approved the artwork
4 pay the 30% deposit, then make the sample
5 take pictures for your check the sample quality,
6 after approve sample, arrange make the bulk
7 payment 70% balance payment
8 send the labels to your required address
9 feedback from your for further orders
TIPS:
In order to quote you ASAP, Please email us your label artwork, we need to know the size, color, quantity to quote.
The label artwork is better to send us PDF or AI format file, JPG format is also ok for us to quote.
We mainly produce Silicone tapes,silicone print tape,silicone print band, silicone print ribbon, silicone antiskid head lamp belt,silicone anti-slip belt,silicone print belt, silicone non-slip tape,silicone no-skid tape,Knitted Elastic tapes,Woven Elastic tapes,,silicone gripper tape for clothing,silicone printed logo tapes,etc
Order process:
1 send me your artwork to quote,
2 after confirm the price, we will make the artwork for you approve,
3 approved the artwork
4 pay the 30% deposit, then make the sample
5 take pictures for your check the sample quality,
6 after approve sample, arrange make the bulk
7 payment 70% balance payment
8 send the labels to your required address
9 feedback from your for further orders
TIPS:
In order to quote you ASAP, Please email us your label artwork, we need to know the size, color, quantity to quote.
The label artwork is better to send us PDF or AI format file, JPG format is also ok for us to quote.
1. 1:1 addition type, good adhesive strength and self-healing
2. High elongation, excellent flexibility for mechanical stress relieving
3. Low oil penetration after cured, good anti-poisoning property
4. Good dielectric in high temperature for high voltage protection
5. Excellent aging resistance and weatherability
6. Excellent waterproof, corrosion prevention, moisture proof and chemical media resistance
Used for encapsulation of various modules, semi-conductor, IGBT, automotive ECU module, IC chip, weighing sensor, waterproof connector.
PROPERTY STANDARD/UNITS VALUE of SI2709
---- ---- PART A PART B
Material ---- Polysiloxane Hydrogen polysiloxane
Color Visual inspection Colorless Liquid Colorless Liquid
Viscosity 7;C, cps 800~1000 800~1000
Density 7;C, g/cm3 0.99 0.99
Mixture/mass ratio ---- A:B=100:100
Viscosity of mixture 7;C, cps 800~1000
Operation time 7;C, min 60
Cure condition RTV or HEAT 7;C /6 hour;67;C /30min
Cured appearance ---- Colorless transparent gel
Needle penetration 1/mm 75
Dielectric strength KV/mm 25
Volume resistance DC500V, ohm-cm 1.0¨¢1015
Loss factor 1 MHz88;0.001
Dielectric constant 1 MHz 2.8
Application temperature7;C -60~260
1.Solvent free two component material
2.Transparent both before and after cured
3.Platinum catalyzed curing system
4.No by-products after curing
5.Low viscosity before cured, easy to application
6.Excellent flexibility, free from stress
7.Extremely low oil exudation, good anti-poisoning
8.By adjusting the mix rate of part A and part B, can adjust the gel adhesion
9.It can stick repeatable
10.It can use with polyethylene release liner
11.Pass test of physiological compatibility, poison cell, skin stimulus etc.
PROPERTY STANDARD/UNITS VALUE of SI2721
---- ---- PART A PART B
Material ---- Polysiloxane Hydrogen polysiloxane
Color Visual inspection Transparent Liquid Transparent Liquid
Viscosity 7;C, cps 61;¨¤150161;¨¤150
Density 7;C, g/cm3 0.99 0.99
Mixture/mass ratio ---- A:B=100: (80~120)
Viscosity of mixture 7;C, cps 800¨¤150
Operation time 7;C, min ¡ê¾60
Cure condition RTV or HEAT 7;C /6 hour; 67;C /5min
Cured appearance ---- Transparent gel
Application temperature §C -60~200
Part Aa20 KG/Bucket, Part Ba20 KG/ Bucket; Part Aa200 KG/Drum, Part Ba20 KG/ Drum.
Part A is also available in 200 kg metal drums accompanied by the corresponding 200 kg of Part B.
